The acknowledge bits don't exist for level triggered irqs, so setting
them causes the simulator to terminate.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NLeonid Rosenboim <lrosenboim@caviumnetworks.com>
Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8946/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Read clock rate from the correct CSR. Don't clear COP0_DCACHE for OCTEONIII.
Signed-off-by: NChandrakala Chavva <cchavva@caviumnetworks.com>
Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com>
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8945/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

CN38XX pass 1 required icache prefetching to be turned off. This chip never
reached production and is long dead. Other processor specific icache settings
are done by the bootloader. Remove these bits from the kernel.
Signed-off-by: NChad Reese <kreese@caviumnetworks.com>
Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: David Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/8944/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8943/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add coverage for OCTEON III models.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8942/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Make messages refer to all CN6XXX.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8941/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Also update union octeon_cvmemctl with new OCTEON II fields.

[aleksey.makarov@auriga.com: use __BITFIELD_FIELD]
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8940/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Disable ICache prefetch for certian Octeon II processors.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8938/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Commit 2c952e06 ("MIPS: Move cop2 save/restore to switch_to()")
removes assembler code to store COP2 registers.  Commit
a36d8225 ("MIPS: OCTEON: Enable use of FPU") mistakenly
restores it

Fixes: a36d8225 ("MIPS: OCTEON: Enable use of FPU")
Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: David Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/8937/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Use dmfc0/dmtc0 instructions for reading CvmMemCtl COP0 register,
its a 64-bit wide.
Signed-off-by: NChandrakala Chavva <cchavva@caviumnetworks.com>
Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: David Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/8936/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Allocate new save space, and then save/restore the registers if
OCTEON III.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8935/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

It wasn't being saved on task switch.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8934/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The wide multiplier is twice as wide, so we need to save twice as much
state.  Detect the multiplier type (CPU type) at start up and install
model specific handlers.

[aleksey.makarov@auriga.com:
	conflict resolution,
	support for old compilers]
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NLeonid Rosenboim <lrosenboim@caviumnetworks.com>
Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8933/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Allow more compression algorithms as well as uncompressed uImage.bin
to be generated. An uncompressed image might be useful to rule out
problems in the decompression code in the bootloader or even speed
up the boot process at the expense of a bigger uImage file.
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9271/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8737/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

There are currently no gio device drivers that implement suspend/resume
and this patch removes the bus specific legacy suspend and resume callbacks.
This will allow us to eventually remove struct bus_type legacy suspend and
resume support altogether.

gio device drivers wanting to implement suspend and resume can use dev PM
ops which will work out of the box without further modifications necessary.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8920/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Without these, there are multiple definitions of pci_proc_domain()
and pci_domain_nr() if linux/pci.h and asm/pci.h are included.

Add #ifdefs around them
Signed-off-by: NZubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Reviewed-by: NMarkos Chandras <Markos.Chandras@imgtec.com>
Cc: Markos.Chandras@imgtec.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8670/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The current code uses bits 0-6 of the sys_cpupll register to calculate
core clock speed.  However this is only valid on Au1300, on all earlier
models the hardware only uses bits 0-5 to generate core clock.

This fixes clock calculation on the MTX1 (Au1500), where bit 6 of cpupll
is set as well, which ultimately lead the code to calculate a bogus cpu
core clock and also uart base clock down the line.
Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com>
Reported-by: NJohn Crispin <blogic@openwrt.org>
Tested-by: NBruno Randolf <br1@einfach.org>
Cc: stable@vger.kernel.org	[v3.17+]
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/9279/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

set_cpuspec() has been dropped with commit 074cf656
("MIPS: Alchemy: remove cpu_table.") in late 2008.
Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/9150/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This was lost during the rewrite of clock framework support.
Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/9149/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The Au1000 and Au1500 calculate the LRCLK a bit differently than
newer models: a single bit in MEM_STCFG0 selects if pclk is divided
by 4 or 5.
Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/9148/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Build set and clear macros for the PageGrain register.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9289/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

* Clean up white spaces and tabs.
   * Get rid of remaining hardcoded values for calculating
     shifts and masks.
   * Get rid of redundant macro values.
   * Do not use page table bits directly in #ifdef's.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9287/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Merge branch 'mipsr6-for-3.20' of git://git.linux-mips.org/pub/scm/mchandras/linux into mips-for-linux-next

Export the _save_msa asm function used by the lose_fpu(1) macro to GPL
modules so that KVM can make use of it when it is built as a module.

This fixes the following build error when CONFIG_KVM=m and
CONFIG_CPU_HAS_MSA=y due to commit f798217d ("KVM: MIPS: Don't leak
FPU/DSP to guest"):

ERROR: "_save_msa" [arch/mips/kvm/kvm.ko] undefined!

Fixes: f798217d (KVM: MIPS: Don't leak FPU/DSP to guest)
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.15+
Patchwork: https://patchwork.linux-mips.org/patch/9261/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Export the _save_fp asm function used by the lose_fpu(1) macro to GPL
modules so that KVM can make use of it when it is built as a module.

This fixes the following build error when CONFIG_KVM=m due to commit
f798217d ("KVM: MIPS: Don't leak FPU/DSP to guest"):

ERROR: "_save_fp" [arch/mips/kvm/kvm.ko] undefined!
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Fixes: f798217d (KVM: MIPS: Don't leak FPU/DSP to guest)
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.10+
Patchwork: https://patchwork.linux-mips.org/patch/9260/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This function was renamed to mips_cpu_irq_of_init(), so fix it to avoid
a compile error.
Signed-off-by: NKevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jaedon.shin@gmail.com
Cc: abrestic@chromium.org
Cc: tglx@linutronix.de
Cc: jason@lakedaemon.net
Cc: jogo@openwrt.org
Cc: arnd@arndb.de
Cc: computersforpeace@gmail.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8834/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Provide correct siginfo_t.si_stime on MIPS64

Bug description:
MIPS version of copy_siginfo() is not aware of alignment on platforms with
64-bit long integers, which leads to an incorrect si_stime passed to signal
handlers, because the last element (si_stime) of _sifields._sigchld is not
copied. If _MIPS_SZLONG is 64, then the _sifields starts at the offset of
4 * sizeof(int).

Patch description:
Use the generic copy_siginfo, which doesn't have this problem.
Signed-off-by: NPetr Malat <oss@malat.biz>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8671/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

We need to check the ASEs support against the core's CFLAGS instead
of depending to the default -march option from the toolchain.
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9180/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The loongson 3A cores do not select a suitable -march option so the build
system uses the default one from the toolchain. This may or may not be
suitable for a loongson 3A build. In order to avoid that, we explicitly set
a suitable -march option for that core.  Furthermore, some very old
compilers don't support -march= at all and there is the possibility of
toolchain combinations such as GCC 4.9 and binutils 2.24 for which
-march=loongson3a will result in MIPS64 R2 code being generated but then
rejected by GAS.  So treat the Longsoon 3A as an R2 CPU.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add a Malta defconfig for the 32-bit MIPS R6 core as emulated
by QEMU.
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>

The Malta platform supports MIPS R6 (via QEMU or real bitstreams)
so add support for it.
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>

The previous implementation did not cover all possible FPU combinations
and it silently allowed ABI incompatible objects to be loaded with the
wrong ABI. For example, the previous logic would set the FP_64 ABI as
the matching ABI for an FP_XX object combined with an FP_64A object.
This was wrong, and the matching ABI should have been FP_64A.
The previous logic is now replaced with a new one which determines
the appropriate FPU mode to be used rather than the FP ABI. This has
the advantage that the entire logic is much simpler since it is the FPU
mode we are interested in rather than the FP ABI resulting to code
simplifications. This also removes the now obsolete FP32XX_HYBRID_FPRS
option.

Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>

MIPS32 R6 has a 64-bit FPU so add the necessary MIPS R6
definition.
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>

A prctl() call to set FR=0 for MIPS R6 should not be allowed
since FR=1 is the only option for R6 cores.

Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Matthew Fortune <matthew.fortune@imgtec.com>
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>

MIPS R2 FPU instructions are also present in MIPS R6 so amend the
preprocessor definitions to take MIPS R6 into consideration.
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>

The ERETNC instruction, introduced in MIPS R5, is similar to the ERET
one, except it does not clear the LLB bit in the LLADDR register.
This feature is necessary to safely emulate R2 LL/SC instructions.
However, on context switches, we need to clear the LLAddr/LLB bit
in order to make sure that an SC instruction from the new thread
will never succeed if it happens to interrupt an LL operation on the
same address from the previous thread.
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>

MIPS R6 removed quite a few R2 instructions. However, there
is plenty of <R6 userland code so we add an in-kernel emulator
so we can still be able to execute all R2 userland out there.

The emulator comes with a handy debugfs under /mips/ directory
(r2-emul-stats) to provide some basic statistics of the
instructions that are being emulated.

Below are some statistics from booting a minimal buildroot image:

Instruction     Total   BDslot
------------------------------
movs            236969  0
hilo            56686   0
muls            55279   0
divs            10941   0
dsps            0       0
bops            1       0
traps           0       0
fpus            0       0
loads           214981  17
stores          103364  0
llsc            56898   0
dsemul          150418  0
jr              370158
bltzl           43
bgezl           1594
bltzll          0
bgezll          0
bltzal          39
bgezal          39
beql            14503
bnel            138741
blezl           0
bgtzl           3988
Signed-off-by: NLeonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>

If Config5/LLB is set in the core, then software can write the LLB
bit in the LLADDR register.
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>

The LLBIT (bit 4) in the Config5 CP0 register indicates the software
availability of the Load-Linked bit. This bit is only set by hardware
and it has the following meaning:

0: LLB functionality is not supported
1: LLB functionality is supported. The following feature are also
supported:

- ERETNC instruction. Similar to ERET but it does not clear the LLB
bit in the LLAddr register.
- CP0 LLAddr/LLB bit must be set
- LLbit is software accessible through the LLAddr[0]

This will be used later on to emulate R2 LL/SC instructions.
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>