commit b4d98bc3fc93ec3a58459948a2c0e0c9b501cd88 upstream.

In `dt3k_ns_to_timer()` the following lines near the end of the function
result in a signed integer overflow:

	prescale = 15;
	base = timer_base * (1 << prescale);
	divider = 65535;
	*nanosec = divider * base;

(`divider`, `base` and `prescale` are type `int`, `timer_base` and
`*nanosec` are type `unsigned int`.  The value of `timer_base` will be
either 50 or 100.)

The main reason for the overflow is that the calculation for `base` is
completely wrong.  It should be:

	base = timer_base * (prescale + 1);

which matches an earlier instance of this calculation in the same
function.
Reported-by: NDavid Binderman <dcb314@hotmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20190812111517.26803-1-abbotti@mev.co.ukSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5eeaf10eec394b28fad2c58f1f5c3a5da0e87d1c upstream.

Since commit commit 328e5664 ("KVM: arm/arm64: vgic: Defer
touching GICH_VMCR to vcpu_load/put"), we leave ICH_VMCR_EL2 (or
its GICv2 equivalent) loaded as long as we can, only syncing it
back when we're scheduled out.

There is a small snag with that though: kvm_vgic_vcpu_pending_irq(),
which is indirectly called from kvm_vcpu_check_block(), needs to
evaluate the guest's view of ICC_PMR_EL1. At the point were we
call kvm_vcpu_check_block(), the vcpu is still loaded, and whatever
changes to PMR is not visible in memory until we do a vcpu_put().

Things go really south if the guest does the following:

	mov x0, #0	// or any small value masking interrupts
	msr ICC_PMR_EL1, x0

	[vcpu preempted, then rescheduled, VMCR sampled]

	mov x0, #ff	// allow all interrupts
	msr ICC_PMR_EL1, x0
	wfi		// traps to EL2, so samping of VMCR

	[interrupt arrives just after WFI]

Here, the hypervisor's view of PMR is zero, while the guest has enabled
its interrupts. kvm_vgic_vcpu_pending_irq() will then say that no
interrupts are pending (despite an interrupt being received) and we'll
block for no reason. If the guest doesn't have a periodic interrupt
firing once it has blocked, it will stay there forever.

To avoid this unfortuante situation, let's resync VMCR from
kvm_arch_vcpu_blocking(), ensuring that a following kvm_vcpu_check_block()
will observe the latest value of PMR.

This has been found by booting an arm64 Linux guest with the pseudo NMI
feature, and thus using interrupt priorities to mask interrupts instead
of the usual PSTATE masking.

Cc: stable@vger.kernel.org # 4.12
Fixes: 328e5664 ("KVM: arm/arm64: vgic: Defer touching GICH_VMCR to vcpu_load/put")
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3d584a3c85d6fe2cf878f220d4ad7145e7f89218 upstream.

When fall-through warnings was enabled by default, commit d93512ef0f0e
("Makefile: Globally enable fall-through warning"), the following
warnings was starting to show up:

In file included from ../arch/arm64/include/asm/kvm_emulate.h:19,
                 from ../arch/arm64/kvm/regmap.c:13:
../arch/arm64/kvm/regmap.c: In function ‘vcpu_write_spsr32’:
../arch/arm64/include/asm/kvm_hyp.h:31:3: warning: this statement may fall
 through [-Wimplicit-fallthrough=]
   asm volatile(ALTERNATIVE(__msr_s(r##nvh, "%x0"), \
   ^~~
../arch/arm64/include/asm/kvm_hyp.h:46:31: note: in expansion of macro ‘write_sysreg_elx’
 #define write_sysreg_el1(v,r) write_sysreg_elx(v, r, _EL1, _EL12)
                               ^~~~~~~~~~~~~~~~
../arch/arm64/kvm/regmap.c:180:3: note: in expansion of macro ‘write_sysreg_el1’
   write_sysreg_el1(v, SYS_SPSR);
   ^~~~~~~~~~~~~~~~
../arch/arm64/kvm/regmap.c:181:2: note: here
  case KVM_SPSR_ABT:
  ^~~~
In file included from ../arch/arm64/include/asm/cputype.h:132,
                 from ../arch/arm64/include/asm/cache.h:8,
                 from ../include/linux/cache.h:6,
                 from ../include/linux/printk.h:9,
                 from ../include/linux/kernel.h:15,
                 from ../include/asm-generic/bug.h:18,
                 from ../arch/arm64/include/asm/bug.h:26,
                 from ../include/linux/bug.h:5,
                 from ../include/linux/mmdebug.h:5,
                 from ../include/linux/mm.h:9,
                 from ../arch/arm64/kvm/regmap.c:11:
../arch/arm64/include/asm/sysreg.h:837:2: warning: this statement may fall
 through [-Wimplicit-fallthrough=]
  asm volatile("msr " __stringify(r) ", %x0"  \
  ^~~
../arch/arm64/kvm/regmap.c:182:3: note: in expansion of macro ‘write_sysreg’
   write_sysreg(v, spsr_abt);
   ^~~~~~~~~~~~
../arch/arm64/kvm/regmap.c:183:2: note: here
  case KVM_SPSR_UND:
  ^~~~

Rework to add a 'break;' in the swich-case since it didn't have that,
leading to an interresting set of bugs.

Cc: stable@vger.kernel.org # v4.17+
Fixes: a8928195 ("KVM: arm64: Prepare to handle deferred save/restore of 32-bit registers")
Signed-off-by: NAnders Roxell <anders.roxell@linaro.org>
[maz: reworked commit message, fixed stable range]
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit cbedfe11347fe418621bd188d58a206beb676218 ]

Commit d66acc39 ("bitops: Optimise get_order()") introduced a
compilation warning because "rx_frag_size" is an "ushort" while
PAGE_SHIFT here is 16.

The commit changed the get_order() to be a multi-line macro where
compilers insist to check all statements in the macro even when
__builtin_constant_p(rx_frag_size) will return false as "rx_frag_size"
is a module parameter.

In file included from ./arch/powerpc/include/asm/page_64.h:107,
                 from ./arch/powerpc/include/asm/page.h:242,
                 from ./arch/powerpc/include/asm/mmu.h:132,
                 from ./arch/powerpc/include/asm/lppaca.h:47,
                 from ./arch/powerpc/include/asm/paca.h:17,
                 from ./arch/powerpc/include/asm/current.h:13,
                 from ./include/linux/thread_info.h:21,
                 from ./arch/powerpc/include/asm/processor.h:39,
                 from ./include/linux/prefetch.h:15,
                 from drivers/net/ethernet/emulex/benet/be_main.c:14:
drivers/net/ethernet/emulex/benet/be_main.c: In function 'be_rx_cqs_create':
./include/asm-generic/getorder.h:54:9: warning: comparison is always
true due to limited range of data type [-Wtype-limits]
   (((n) < (1UL << PAGE_SHIFT)) ? 0 :  \
         ^
drivers/net/ethernet/emulex/benet/be_main.c:3138:33: note: in expansion
of macro 'get_order'
  adapter->big_page_size = (1 << get_order(rx_frag_size)) * PAGE_SIZE;
                                 ^~~~~~~~~

Fix it by moving all of this multi-line macro into a proper function,
and killing __get_order() off.

[akpm@linux-foundation.org: remove __get_order() altogether]
[cai@lca.pw: v2]
  Link: http://lkml.kernel.org/r/1564000166-31428-1-git-send-email-cai@lca.pw
Link: http://lkml.kernel.org/r/1563914986-26502-1-git-send-email-cai@lca.pw
Fixes: d66acc39 ("bitops: Optimise get_order()")
Signed-off-by: NQian Cai <cai@lca.pw>
Reviewed-by: NNathan Chancellor <natechancellor@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: James Y Knight <jyknight@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7bc36e3ce91471b6377c8eadc0a2f220a2280083 ]

Fixes gcc '-Wunused-but-set-variable' warning:

  fs/ocfs2/xattr.c: In function ocfs2_xattr_bucket_find:
  fs/ocfs2/xattr.c:3828:6: warning: variable last_hash set but not used [-Wunused-but-set-variable]

It's never used and can be removed.

Link: http://lkml.kernel.org/r/20190716132110.34836-1-yuehaibing@huawei.comSigned-off-by: NYueHaibing <yuehaibing@huawei.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit df9576def004d2cd5beedc00cb6e8901427634b9 ]

When running ltp's oom test with kmemleak enabled, the below warning was
triggerred since kernel detects __GFP_NOFAIL & ~__GFP_DIRECT_RECLAIM is
passed in:

  WARNING: CPU: 105 PID: 2138 at mm/page_alloc.c:4608 __alloc_pages_nodemask+0x1c31/0x1d50
  Modules linked in: loop dax_pmem dax_pmem_core ip_tables x_tables xfs virtio_net net_failover virtio_blk failover ata_generic virtio_pci virtio_ring virtio libata
  CPU: 105 PID: 2138 Comm: oom01 Not tainted 5.2.0-next-20190710+ #7
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
  RIP: 0010:__alloc_pages_nodemask+0x1c31/0x1d50
  ...
   kmemleak_alloc+0x4e/0xb0
   kmem_cache_alloc+0x2a7/0x3e0
   mempool_alloc_slab+0x2d/0x40
   mempool_alloc+0x118/0x2b0
   bio_alloc_bioset+0x19d/0x350
   get_swap_bio+0x80/0x230
   __swap_writepage+0x5ff/0xb20

The mempool_alloc_slab() clears __GFP_DIRECT_RECLAIM, however kmemleak
has __GFP_NOFAIL set all the time due to d9570ee3 ("kmemleak:
allow to coexist with fault injection").  But, it doesn't make any sense
to have __GFP_NOFAIL and ~__GFP_DIRECT_RECLAIM specified at the same
time.

According to the discussion on the mailing list, the commit should be
reverted for short term solution.  Catalin Marinas would follow up with
a better solution for longer term.

The failure rate of kmemleak metadata allocation may increase in some
circumstances, but this should be expected side effect.

Link: http://lkml.kernel.org/r/1563299431-111710-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: d9570ee3 ("kmemleak: allow to coexist with fault injection")
Signed-off-by: NYang Shi <yang.shi@linux.alibaba.com>
Suggested-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1bbbab097a05276e312dd2462791d32b21ceb1ee ]

Currently the retry counter is not being decremented, leading to a
potential infinite spin if the scalar_reads don't change state.

Addresses-Coverity: ("Infinite loop")
Fixes: 280e54c9 ("drm/exynos: scaler: Reset hardware before starting the operation")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9ca7ad6c7706edeae331c1632d0c63897418ebad ]

add_gpu_components() adds found GPU nodes from the DT to the match list,
regardless of the status of the nodes.  This is a problem, because if the
nodes are disabled, they should not be on the match list because they will
not be matched.  This prevents display from initing if a GPU node is
defined, but it's status is disabled.

Fix this by checking the node's status before adding it to the match list.

Fixes: dc3ea265 (drm/msm: Drop the gpu binding)
Reviewed-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NJeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626180015.45242-1-jeffrey.l.hugo@gmail.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 770b7d96cfff6a8bf6c9f261ba6f135dc9edf484 ]

We encountered a use-after-free bug when unloading the driver:

[ 3562.116059] BUG: KASAN: use-after-free in ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.117233] Read of size 4 at addr ffff8882ca5aa868 by task kworker/u13:2/23862
[ 3562.118385]
[ 3562.119519] CPU: 2 PID: 23862 Comm: kworker/u13:2 Tainted: G           OE     5.1.0-for-upstream-dbg-2019-05-19_16-44-30-13 #1
[ 3562.121806] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014
[ 3562.123075] Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core]
[ 3562.124383] Call Trace:
[ 3562.125640]  dump_stack+0x9a/0xeb
[ 3562.126911]  print_address_description+0xe3/0x2e0
[ 3562.128223]  ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.129545]  __kasan_report+0x15c/0x1df
[ 3562.130866]  ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.132174]  kasan_report+0xe/0x20
[ 3562.133514]  ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.134835]  ? find_mad_agent+0xa00/0xa00 [ib_core]
[ 3562.136158]  ? qlist_free_all+0x51/0xb0
[ 3562.137498]  ? mlx4_ib_sqp_comp_worker+0x1970/0x1970 [mlx4_ib]
[ 3562.138833]  ? quarantine_reduce+0x1fa/0x270
[ 3562.140171]  ? kasan_unpoison_shadow+0x30/0x40
[ 3562.141522]  ib_mad_recv_done+0xdf6/0x3000 [ib_core]
[ 3562.142880]  ? _raw_spin_unlock_irqrestore+0x46/0x70
[ 3562.144277]  ? ib_mad_send_done+0x1810/0x1810 [ib_core]
[ 3562.145649]  ? mlx4_ib_destroy_cq+0x2a0/0x2a0 [mlx4_ib]
[ 3562.147008]  ? _raw_spin_unlock_irqrestore+0x46/0x70
[ 3562.148380]  ? debug_object_deactivate+0x2b9/0x4a0
[ 3562.149814]  __ib_process_cq+0xe2/0x1d0 [ib_core]
[ 3562.151195]  ib_cq_poll_work+0x45/0xf0 [ib_core]
[ 3562.152577]  process_one_work+0x90c/0x1860
[ 3562.153959]  ? pwq_dec_nr_in_flight+0x320/0x320
[ 3562.155320]  worker_thread+0x87/0xbb0
[ 3562.156687]  ? __kthread_parkme+0xb6/0x180
[ 3562.158058]  ? process_one_work+0x1860/0x1860
[ 3562.159429]  kthread+0x320/0x3e0
[ 3562.161391]  ? kthread_park+0x120/0x120
[ 3562.162744]  ret_from_fork+0x24/0x30
...
[ 3562.187615] Freed by task 31682:
[ 3562.188602]  save_stack+0x19/0x80
[ 3562.189586]  __kasan_slab_free+0x11d/0x160
[ 3562.190571]  kfree+0xf5/0x2f0
[ 3562.191552]  ib_mad_port_close+0x200/0x380 [ib_core]
[ 3562.192538]  ib_mad_remove_device+0xf0/0x230 [ib_core]
[ 3562.193538]  remove_client_context+0xa6/0xe0 [ib_core]
[ 3562.194514]  disable_device+0x14e/0x260 [ib_core]
[ 3562.195488]  __ib_unregister_device+0x79/0x150 [ib_core]
[ 3562.196462]  ib_unregister_device+0x21/0x30 [ib_core]
[ 3562.197439]  mlx4_ib_remove+0x162/0x690 [mlx4_ib]
[ 3562.198408]  mlx4_remove_device+0x204/0x2c0 [mlx4_core]
[ 3562.199381]  mlx4_unregister_interface+0x49/0x1d0 [mlx4_core]
[ 3562.200356]  mlx4_ib_cleanup+0xc/0x1d [mlx4_ib]
[ 3562.201329]  __x64_sys_delete_module+0x2d2/0x400
[ 3562.202288]  do_syscall_64+0x95/0x470
[ 3562.203277]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

The problem was that the MAD PD was deallocated before the MAD CQ.
There was completion work pending for the CQ when the PD got deallocated.
When the mad completion handling reached procedure
ib_mad_post_receive_mads(), we got a use-after-free bug in the following
line of code in that procedure:
   sg_list.lkey = qp_info->port_priv->pd->local_dma_lkey;
(the pd pointer in the above line is no longer valid, because the
pd has been deallocated).

We fix this by allocating the PD before the CQ in procedure
ib_mad_port_open(), and deallocating the PD after freeing the CQ
in procedure ib_mad_port_close().

Since the CQ completion work queue is flushed during ib_free_cq(),
no completions will be pending for that CQ when the PD is later
deallocated.

Note that freeing the CQ before deallocating the PD is the practice
in the ULPs.

Fixes: 4be90bc6 ("IB/mad: Remove ib_get_dma_mr calls")
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190801121449.24973-1-leon@kernel.orgSigned-off-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e5366d309a772fef264ec85e858f9ea46f939848 ]

Driver shouldn't allow to use UMR to register a MR when
umr_modify_atomic_disabled is set. Otherwise it will always end up with a
failure in the post send flow which sets the UMR WQE to modify atomic access
right.

Fixes: c8d75a98 ("IB/mlx5: Respect new UMR capabilities")
Signed-off-by: NGuy Levi <guyle@mellanox.com>
Reviewed-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190731081929.32559-1-leon@kernel.orgSigned-off-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 61f259821dd3306e49b7d42a3f90fb5a4ff3351b ]

Some processors may mispredict an array bounds check and
speculatively access memory that they should not. With
a user supplied array index we like to play things safe
by masking the value with the array size before it is
used as an index.
Signed-off-by: NTony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20190731043957.GA1600@agluck-desk2.amr.corp.intel.comSigned-off-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7d4e2dcf311d3b98421d1f119efe5964cafa32fc ]

GCC throws a warning,

arch/arm64/mm/mmu.c: In function 'pud_free_pmd_page':
arch/arm64/mm/mmu.c:1033:8: warning: variable 'pud' set but not used
[-Wunused-but-set-variable]
  pud_t pud;
        ^~~

because pud_table() is a macro and compiled away. Fix it by making it a
static inline function and for pud_sect() as well.
Signed-off-by: NQian Cai <cai@lca.pw>
Signed-off-by: NWill Deacon <will@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ee07b93e7721ccd5d5b9fa6f0c10cb3fe2f1f4f9 ]

Prohibit probing on return_address() and subroutines which
is called from return_address(), since the it is invoked from
trace_hardirqs_off() which is also kprobe blacklisted.
Reported-by: NNaresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NWill Deacon <will@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f1d4836201543e88ebe70237e67938168d5fab19 ]

GCC throws out this warning on arm64.

drivers/firmware/efi/libstub/arm-stub.c: In function 'efi_entry':
drivers/firmware/efi/libstub/arm-stub.c:132:22: warning: variable 'si'
set but not used [-Wunused-but-set-variable]

Fix it by making free_screen_info() a static inline function.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQian Cai <cai@lca.pw>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e8de12fb7cde2c85bc31097cd098da79a4818305 ]

If the particular version of clang a user has doesn't enable
-Werror=unknown-warning-option by default, even though it is the
default[1], then make sure to pass the option to the Kconfig cc-option
command so that testing options from Kconfig files works properly.
Otherwise, depending on the default values setup in the clang toolchain
we will silently assume options such as -Wmaybe-uninitialized are
supported by clang, when they really aren't.

A compilation issue only started happening for me once commit
589834b3a009 ("kbuild: Add -Werror=unknown-warning-option to
CLANG_FLAGS") was applied on top of commit b303c6df80c9 ("kbuild:
compute false-positive -Wmaybe-uninitialized cases in Kconfig"). This
leads kbuild to try and test for the existence of the
-Wmaybe-uninitialized flag with the cc-option command in
scripts/Kconfig.include, and it doesn't see an error returned from the
option test so it sets the config value to Y. Then the Makefile tries to
pass the unknown option on the command line and
-Werror=unknown-warning-option catches the invalid option and breaks the
build. Before commit 589834b3a009 ("kbuild: Add
-Werror=unknown-warning-option to CLANG_FLAGS") the build works fine,
but any cc-option test of a warning option in Kconfig files silently
evaluates to true, even if the warning option flag isn't supported on
clang.

Note: This doesn't change cc-option usages in Makefiles because those
use a different rule that includes KBUILD_CFLAGS by default (see the
__cc-option command in scripts/Kbuild.incluide). The KBUILD_CFLAGS
variable already has the -Werror=unknown-warning-option flag set. Thanks
to Doug for pointing out the different rule.

[1] https://clang.llvm.org/docs/DiagnosticsReference.html#wunknown-warning-option
Cc: Peter Smith <peter.smith@linaro.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: NStephen Boyd <swboyd@chromium.org>
Reviewed-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit cb4819934a7f9b87876f11ed05b8624c0114551b ]

KBUILD_EXTRA_SYMBOLS makes sense only when building external modules.
Moreover, the modpost sets 'external_module' if the -e option is given.

I replaced $(patsubst %, -e %,...) with simpler $(addprefix -e,...)
while I was here.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 090bb803708198e5ab6b0046398c7ed9f4d12d6b ]

Retrieving PHYs can defer the probe, do not spawn an error when
-EPROBE_DEFER is returned, it is normal behavior.

Fixes: b1a9edbd ("ata: libahci: allow to use multiple PHYs")
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 929e571c04c285861e0bb049a396a2bdaea63282 ]

Coccinelle reports a path that the array "data" is never initialized.
The path skips the checks in the conditional branches when either
of callback functions, read_wave_vgprs and read_wave_sgprs, is not
registered. Later, the uninitialized "data" array is read
in the while-loop below and passed to put_user().

Fix the path by allocating the array with kcalloc().

The patch is simplier than adding a fall-back branch that explicitly
calls memset(data, 0, ...). Also it does not need the multiplication
1024*sizeof(*data) as the size parameter for memset() though there is
no risk of integer overflow.
Signed-off-by: NWang Xiayang <xywang.sjtu@sjtu.edu.cn>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e82f04ec6ba91065fd33a6201ffd7cab840e1475 ]

In qla2x00_alloc_fcport(), fcport is assigned to NULL in the error
handling code on line 4880:
    fcport = NULL;

Then fcport is used on lines 4883-4886:
    INIT_WORK(&fcport->del_work, qla24xx_delete_sess_fn);
	INIT_WORK(&fcport->reg_work, qla_register_fcport_fn);
	INIT_LIST_HEAD(&fcport->gnl_entry);
	INIT_LIST_HEAD(&fcport->list);

Thus, possible null-pointer dereferences may occur.

To fix these bugs, qla2x00_alloc_fcport() directly returns NULL
in the error handling code.

These bugs are found by a static analysis tool STCheck written by us.
Signed-off-by: NJia-Ju Bai <baijiaju1990@gmail.com>
Acked-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit eeebce1862970653cdf5c01e98bc669edd8f529a ]
Reviewed-by: NBader Ali - Saleh <bader.alisaleh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a6d155d2e363f26290ffd50591169cb96c2a609e ]

The fiemap handler locks a file range that can have unflushed delalloc,
and after locking the range, it tries to attach to a running transaction.
If the running transaction started its commit, that is, it is in state
TRANS_STATE_COMMIT_START, and either the filesystem was mounted with the
flushoncommit option or the transaction is creating a snapshot for the
subvolume that contains the file that fiemap is operating on, we end up
deadlocking. This happens because fiemap is blocked on the transaction,
waiting for it to complete, and the transaction is waiting for the flushed
dealloc to complete, which requires locking the file range that the fiemap
task already locked. The following stack traces serve as an example of
when this deadlock happens:

  (...)
  [404571.515510] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs]
  [404571.515956] Call Trace:
  [404571.516360]  ? __schedule+0x3ae/0x7b0
  [404571.516730]  schedule+0x3a/0xb0
  [404571.517104]  lock_extent_bits+0x1ec/0x2a0 [btrfs]
  [404571.517465]  ? remove_wait_queue+0x60/0x60
  [404571.517832]  btrfs_finish_ordered_io+0x292/0x800 [btrfs]
  [404571.518202]  normal_work_helper+0xea/0x530 [btrfs]
  [404571.518566]  process_one_work+0x21e/0x5c0
  [404571.518990]  worker_thread+0x4f/0x3b0
  [404571.519413]  ? process_one_work+0x5c0/0x5c0
  [404571.519829]  kthread+0x103/0x140
  [404571.520191]  ? kthread_create_worker_on_cpu+0x70/0x70
  [404571.520565]  ret_from_fork+0x3a/0x50
  [404571.520915] kworker/u8:6    D    0 31651      2 0x80004000
  [404571.521290] Workqueue: btrfs-flush_delalloc btrfs_flush_delalloc_helper [btrfs]
  (...)
  [404571.537000] fsstress        D    0 13117  13115 0x00004000
  [404571.537263] Call Trace:
  [404571.537524]  ? __schedule+0x3ae/0x7b0
  [404571.537788]  schedule+0x3a/0xb0
  [404571.538066]  wait_current_trans+0xc8/0x100 [btrfs]
  [404571.538349]  ? remove_wait_queue+0x60/0x60
  [404571.538680]  start_transaction+0x33c/0x500 [btrfs]
  [404571.539076]  btrfs_check_shared+0xa3/0x1f0 [btrfs]
  [404571.539513]  ? extent_fiemap+0x2ce/0x650 [btrfs]
  [404571.539866]  extent_fiemap+0x2ce/0x650 [btrfs]
  [404571.540170]  do_vfs_ioctl+0x526/0x6f0
  [404571.540436]  ksys_ioctl+0x70/0x80
  [404571.540734]  __x64_sys_ioctl+0x16/0x20
  [404571.540997]  do_syscall_64+0x60/0x1d0
  [404571.541279]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  (...)
  [404571.543729] btrfs           D    0 14210  14208 0x00004000
  [404571.544023] Call Trace:
  [404571.544275]  ? __schedule+0x3ae/0x7b0
  [404571.544526]  ? wait_for_completion+0x112/0x1a0
  [404571.544795]  schedule+0x3a/0xb0
  [404571.545064]  schedule_timeout+0x1ff/0x390
  [404571.545351]  ? lock_acquire+0xa6/0x190
  [404571.545638]  ? wait_for_completion+0x49/0x1a0
  [404571.545890]  ? wait_for_completion+0x112/0x1a0
  [404571.546228]  wait_for_completion+0x131/0x1a0
  [404571.546503]  ? wake_up_q+0x70/0x70
  [404571.546775]  btrfs_wait_ordered_extents+0x27c/0x400 [btrfs]
  [404571.547159]  btrfs_commit_transaction+0x3b0/0xae0 [btrfs]
  [404571.547449]  ? btrfs_mksubvol+0x4a4/0x640 [btrfs]
  [404571.547703]  ? remove_wait_queue+0x60/0x60
  [404571.547969]  btrfs_mksubvol+0x605/0x640 [btrfs]
  [404571.548226]  ? __sb_start_write+0xd4/0x1c0
  [404571.548512]  ? mnt_want_write_file+0x24/0x50
  [404571.548789]  btrfs_ioctl_snap_create_transid+0x169/0x1a0 [btrfs]
  [404571.549048]  btrfs_ioctl_snap_create_v2+0x11d/0x170 [btrfs]
  [404571.549307]  btrfs_ioctl+0x133f/0x3150 [btrfs]
  [404571.549549]  ? mem_cgroup_charge_statistics+0x4c/0xd0
  [404571.549792]  ? mem_cgroup_commit_charge+0x84/0x4b0
  [404571.550064]  ? __handle_mm_fault+0xe3e/0x11f0
  [404571.550306]  ? do_raw_spin_unlock+0x49/0xc0
  [404571.550608]  ? _raw_spin_unlock+0x24/0x30
  [404571.550976]  ? __handle_mm_fault+0xedf/0x11f0
  [404571.551319]  ? do_vfs_ioctl+0xa2/0x6f0
  [404571.551659]  ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
  [404571.552087]  do_vfs_ioctl+0xa2/0x6f0
  [404571.552355]  ksys_ioctl+0x70/0x80
  [404571.552621]  __x64_sys_ioctl+0x16/0x20
  [404571.552864]  do_syscall_64+0x60/0x1d0
  [404571.553104]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  (...)

If we were joining the transaction instead of attaching to it, we would
not risk a deadlock because a join only blocks if the transaction is in a
state greater then or equals to TRANS_STATE_COMMIT_DOING, and the delalloc
flush performed by a transaction is done before it reaches that state,
when it is in the state TRANS_STATE_COMMIT_START. However a transaction
join is intended for use cases where we do modify the filesystem, and
fiemap only needs to peek at delayed references from the current
transaction in order to determine if extents are shared, and, besides
that, when there is no current transaction or when it blocks to wait for
a current committing transaction to complete, it creates a new transaction
without reserving any space. Such unnecessary transactions, besides doing
unnecessary IO, can cause transaction aborts (-ENOSPC) and unnecessary
rotation of the precious backup roots.

So fix this by adding a new transaction join variant, named join_nostart,
which behaves like the regular join, but it does not create a transaction
when none currently exists or after waiting for a committing transaction
to complete.

Fixes: 03628cdbc64db6 ("Btrfs: do not start a transaction during fiemap")
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f4cc743a98136df3c3763050a0e8223b52d9a960 ]

If DRM_LVDS_ENCODER=y but CONFIG_DRM_KMS_HELPER=m,
build fails:

drivers/gpu/drm/bridge/lvds-encoder.o: In function `lvds_encoder_probe':
lvds-encoder.c:(.text+0x155): undefined reference to `devm_drm_panel_bridge_add'
Reported-by: NHulk Robot <hulkci@huawei.com>
Fixes: dbb58bfd ("drm/bridge: Fix lvds-encoder since the panel_bridge rework.")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190729071216.27488-1-yuehaibing@huawei.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 71d6c505b4d9e6f76586350450e785e3d452b346 ]

Jeffrin reported a KASAN issue:

  BUG: KASAN: global-out-of-bounds in ata_exec_internal_sg+0x50f/0xc70
  Read of size 16 at addr ffffffff91f41f80 by task scsi_eh_1/149
  ...
  The buggy address belongs to the variable:
    cdb.48319+0x0/0x40

Much like commit 18c9a99b ("libata: zpodd: small read overflow in
eject_tray()"), this fixes a cdb[] buffer length, this time in
zpodd_get_mech_type():

We read from the cdb[] buffer in ata_exec_internal_sg(). It has to be
ATAPI_CDB_LEN (16) bytes long, but this buffer is only 12 bytes.
Reported-by: NJeffrin Jose T <jeffrin@rajagiritech.edu.in>
Fixes: afe75951 ("libata: identify and init ZPODD devices")
Link: https://lore.kernel.org/lkml/201907181423.E808958@keescook/Tested-by: NJeffrin Jose T <jeffrin@rajagiritech.edu.in>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 20f9781f491360e7459c589705a2e4b1f136bee9 ]

When building our local version of perf with MSAN (Memory Sanitizer) and
running the perf record command, MSAN throws a use of uninitialized
value warning in "tools/perf/util/util.c:333:6".

This warning stems from the "buf" variable being passed into "write".
It originated as the variable "ev" with the type union perf_event*
defined in the "perf_event__synthesize_attr" function in
"tools/perf/util/header.c".

In the "perf_event__synthesize_attr" function they allocate space with a malloc
call using ev, then go on to only assign some of the member variables before
passing "ev" on as a parameter to the "process" function therefore "ev"
contains uninitialized memory. Changing the malloc call to zalloc to initialize
all the members of "ev" which gets rid of the warning.

To reproduce this warning, build perf by running:
make -C tools/perf CLANG=1 CC=clang EXTRA_CFLAGS="-fsanitize=memory\
 -fsanitize-memory-track-origins"

(Additionally, llvm might have to be installed and clang might have to
be specified as the compiler - export CC=/usr/bin/clang)

then running:
tools/perf/perf record -o - ls / | tools/perf/perf --no-pager annotate\
 -i - --stdio

Please see the cover letter for why false positive warnings may be
generated.
Signed-off-by: NNumfor Mbiziwo-Tiapo <nums@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Drayton <mbd@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190724234500.253358-2-nums@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7622236ceb167aa3857395f9bdaf871442aa467e ]

So I have been having lots of trouble with hand-crafted perf.data files
causing segfaults and the like, so I have started fuzzing the perf tool.

First issue found:

If f_header.attr_size is 0 in the perf.data file, then perf will crash
with a divide-by-zero error.

Committer note:

Added a pr_err() to tell the user why the command failed.
Signed-off-by: NVince Weaver <vincent.weaver@maine.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1907231100440.14532@macbook-airSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9a446ef08f3bfc0c3deb9c6be840af2528ef8cf8 ]

The GPCv2 is a stacked IRQ controller below the ARM GIC. It doesn't
care about the IRQ type itself, but needs to forward the type to the
parent IRQ controller, so this one can be configured correctly.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 34f8eb92ca053cbba2887bb7e4dbf2b2cd6eb733 ]

In its_vpe_init, when its_alloc_vpe_table fails, we should free
vpt_page allocated just before, instead of vpe->vpt_page.
Let's fix it.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NNianyao Tang <tangnianyao@huawei.com>
Signed-off-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 09e088a4903bd0dd911b4f1732b250130cdaffed ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/xen/xen-pciback/conf_space_capability.c: In function pm_ctrl_write:
drivers/xen/xen-pciback/conf_space_capability.c:119:25: warning:
 variable old_state set but not used [-Wunused-but-set-variable]

It is never used so can be removed.
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e1f1ae8002e4b06addc52443fcd975bbf554ae92 ]

The module reset code in the Renesas CPG/MSSR driver uses
read-modify-write (RMW) operations to write to a Software Reset Register
(SRCRn), and simple writes to write to a Software Reset Clearing
Register (SRSTCLRn), as was mandated by the R-Car Gen2 and Gen3 Hardware
User's Manuals.

However, this may cause a race condition when two devices are reset in
parallel: if the reset for device A completes in the middle of the RMW
operation for device B, device A may be reset again, causing subtle
failures (e.g. i2c timeouts):

	thread A			thread B
	--------			--------

	val = SRCRn
	val |= bit A
	SRCRn = val

	delay

					val = SRCRn (bit A is set)

	SRSTCLRn = bit A
	(bit A in SRCRn is cleared)

					val |= bit B
					SRCRn = val (bit A and B are set)

This can be reproduced on e.g. Salvator-XS using:

    $ while true; do i2cdump -f -y 4 0x6A b > /dev/null; done &
    $ while true; do i2cdump -f -y 2 0x10 b > /dev/null; done &

    i2c-rcar e6510000.i2c: error -110 : 40000002
    i2c-rcar e66d8000.i2c: error -110 : 40000002

According to the R-Car Gen3 Hardware Manual Errata for Rev.
0.80 of Feb 28, 2018, reflected in Rev. 1.00 of the R-Car Gen3 Hardware
User's Manual, writes to SRCRn do not require read-modify-write cycles.

Note that the R-Car Gen2 Hardware User's Manual has not been updated
yet, and still says a read-modify-write sequence is required.  According
to the hardware team, the reset hardware block is the same on both R-Car
Gen2 and Gen3, though.

Hence fix the issue by replacing the read-modify-write operations on
SRCRn by simple writes.
Reported-by: NYao Lihua <Lihua.Yao@desay-svautomotive.com>
Fixes: 6197aa65 ("clk: renesas: cpg-mssr: Add support for reset control")
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Tested-by: NLinh Phung <linh.phung.jy@renesas.com>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c9a67cbb5189e966c70451562b2ca4c3876ab546 ]

Make REGMAP_MMIO selected to avoid undefined reference to regmap symbols.

Fixes: d41f59fd ("clk: sprd: Add common infrastructure")
Signed-off-by: NChunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1573eebeaa8055777eb753f9b4d1cbe653380c38 ]

In clk_generated_determine_rate(), if the divisor is greater than
GENERATED_MAX_DIV + 1, then the wrong best_rate will be returned.
If clk_generated_set_rate() will be called later with this wrong
rate, it will return -EINVAL, so the generated clock won't change
its value. Do no let the divisor be greater than GENERATED_MAX_DIV + 1.

Fixes: 8c7aa632 ("clk: at91: clk-generated: remove useless divisor loop")
Signed-off-by: NCodrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: NNicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: NLudovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

commit 69703eb9a8ae28a46cd5bce7d69ceeef6273a104 upstream.

Make the __fstate_clean() function correctly set the
state of sstatus.FS in pt_regs to SR_FS_CLEAN.

Fixes: 7db91e57 ("RISC-V: Task implementation")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: NVincent Chen <vincent.chen@sifive.com>
Reviewed-by: NAnup Patel <anup@brainfault.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
[paul.walmsley@sifive.com: expanded "Fixes" commit ID]
Signed-off-by: NPaul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3b48300d5cc7c7bed63fddb006c4046549ed4aec upstream.

ebtables doesn't include the base chain policies in the rule count,
so we need to add them manually when we call into the x_tables core
to allocate space for the comapt offset table.

This lead syzbot to trigger:
WARNING: CPU: 1 PID: 9012 at net/netfilter/x_tables.c:649
xt_compat_add_offset.cold+0x11/0x36 net/netfilter/x_tables.c:649

Reported-by: syzbot+276ddebab3382bbf72db@syzkaller.appspotmail.com
Fixes: 2035f3ff8eaa ("netfilter: ebtables: compat: un-break 32bit setsockopt when no rules are present")
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 224c04973db1125fcebefffd86115f99f50f8277 upstream.

get_registers() may fail with -ENOMEM and in this
case we can read a garbage from the status variable tmp.

Reported-by: syzbot+3499a83b2d062ae409d4@syzkaller.appspotmail.com
Signed-off-by: NDenis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 849f5ae3a513c550cad741c68dd3d7eb2bcc2a2c upstream.

The endpoint type should also be checked before a device
is accepted.

Reported-by: syzbot+5efc10c005014d061a74@syzkaller.appspotmail.com
Signed-off-by: NOliver Neukum <oneukum@suse.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c88090dfc84254fa149174eb3e6a8458de1912c4 upstream.

The driver should check whether the endpoint it uses has the correct
type.

Reported-by: syzbot+c7df50363aaff50aa363@syzkaller.appspotmail.com
Signed-off-by: NOliver Neukum <oneukum@suse.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6d4472d7bec39917b54e4e80245784ea5d60ce49 upstream.

Undo what we did for opening before releasing the memory slice.
Reported-by: Nsyzbot <syzbot+62a1e04fd3ec2abf099e@syzkaller.appspotmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: NHillf Danton <hdanton@sina.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9c09b214f30e3c11f9b0b03f89442df03643794d upstream.

syzbot found the following crash on:

HEAD commit:    e96407b4 usb-fuzzer: main usb gadget fuzzer driver
git tree:       https://github.com/google/kasan.git usb-fuzzer
console output: https://syzkaller.appspot.com/x/log.txt?x=147ac20c600000
kernel config:  https://syzkaller.appspot.com/x/.config?x=792eb47789f57810
dashboard link: https://syzkaller.appspot.com/bug?extid=62a1e04fd3ec2abf099e
compiler:       gcc (GCC) 9.0.0 20181231 (experimental)

==================================================================
BUG: KASAN: use-after-free in __lock_acquire+0x302a/0x3b50
kernel/locking/lockdep.c:3753
Read of size 8 at addr ffff8881cf591a08 by task syz-executor.1/26260

CPU: 1 PID: 26260 Comm: syz-executor.1 Not tainted 5.3.0-rc2+ #24
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0xca/0x13e lib/dump_stack.c:113
  print_address_description+0x6a/0x32c mm/kasan/report.c:351
  __kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482
  kasan_report+0xe/0x12 mm/kasan/common.c:612
  __lock_acquire+0x302a/0x3b50 kernel/locking/lockdep.c:3753
  lock_acquire+0x127/0x320 kernel/locking/lockdep.c:4412
  __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
  _raw_spin_lock_irqsave+0x32/0x50 kernel/locking/spinlock.c:159
  hiddev_release+0x82/0x520 drivers/hid/usbhid/hiddev.c:221
  __fput+0x2d7/0x840 fs/file_table.c:280
  task_work_run+0x13f/0x1c0 kernel/task_work.c:113
  exit_task_work include/linux/task_work.h:22 [inline]
  do_exit+0x8ef/0x2c50 kernel/exit.c:878
  do_group_exit+0x125/0x340 kernel/exit.c:982
  get_signal+0x466/0x23d0 kernel/signal.c:2728
  do_signal+0x88/0x14e0 arch/x86/kernel/signal.c:815
  exit_to_usermode_loop+0x1a2/0x200 arch/x86/entry/common.c:159
  prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline]
  syscall_return_slowpath arch/x86/entry/common.c:274 [inline]
  do_syscall_64+0x45f/0x580 arch/x86/entry/common.c:299
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x459829
Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f75b2a6ccf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: fffffffffffffe00 RBX: 000000000075c078 RCX: 0000000000459829
RDX: 0000000000000000 RSI: 0000000000000080 RDI: 000000000075c078
RBP: 000000000075c070 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000075c07c
R13: 00007ffcdfe1023f R14: 00007f75b2a6d9c0 R15: 000000000075c07c

Allocated by task 104:
  save_stack+0x1b/0x80 mm/kasan/common.c:69
  set_track mm/kasan/common.c:77 [inline]
  __kasan_kmalloc mm/kasan/common.c:487 [inline]
  __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:460
  kmalloc include/linux/slab.h:552 [inline]
  kzalloc include/linux/slab.h:748 [inline]
  hiddev_connect+0x242/0x5b0 drivers/hid/usbhid/hiddev.c:900
  hid_connect+0x239/0xbb0 drivers/hid/hid-core.c:1882
  hid_hw_start drivers/hid/hid-core.c:1981 [inline]
  hid_hw_start+0xa2/0x130 drivers/hid/hid-core.c:1972
  appleir_probe+0x13e/0x1a0 drivers/hid/hid-appleir.c:308
  hid_device_probe+0x2be/0x3f0 drivers/hid/hid-core.c:2209
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  hid_add_device+0x33c/0x990 drivers/hid/hid-core.c:2365
  usbhid_probe+0xa81/0xfa0 drivers/hid/usbhid/hid-core.c:1386
  usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  usb_set_configuration+0xdf6/0x1670 drivers/usb/core/message.c:2023
  generic_probe+0x9d/0xd5 drivers/usb/core/generic.c:210
  usb_probe_device+0x99/0x100 drivers/usb/core/driver.c:266
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  usb_new_device.cold+0x6a4/0xe79 drivers/usb/core/hub.c:2536
  hub_port_connect drivers/usb/core/hub.c:5098 [inline]
  hub_port_connect_change drivers/usb/core/hub.c:5213 [inline]
  port_event drivers/usb/core/hub.c:5359 [inline]
  hub_event+0x1b5c/0x3640 drivers/usb/core/hub.c:5441
  process_one_work+0x92b/0x1530 kernel/workqueue.c:2269
  worker_thread+0x96/0xe20 kernel/workqueue.c:2415
  kthread+0x318/0x420 kernel/kthread.c:255
  ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

Freed by task 104:
  save_stack+0x1b/0x80 mm/kasan/common.c:69
  set_track mm/kasan/common.c:77 [inline]
  __kasan_slab_free+0x130/0x180 mm/kasan/common.c:449
  slab_free_hook mm/slub.c:1423 [inline]
  slab_free_freelist_hook mm/slub.c:1470 [inline]
  slab_free mm/slub.c:3012 [inline]
  kfree+0xe4/0x2f0 mm/slub.c:3953
  hiddev_connect.cold+0x45/0x5c drivers/hid/usbhid/hiddev.c:914
  hid_connect+0x239/0xbb0 drivers/hid/hid-core.c:1882
  hid_hw_start drivers/hid/hid-core.c:1981 [inline]
  hid_hw_start+0xa2/0x130 drivers/hid/hid-core.c:1972
  appleir_probe+0x13e/0x1a0 drivers/hid/hid-appleir.c:308
  hid_device_probe+0x2be/0x3f0 drivers/hid/hid-core.c:2209
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  hid_add_device+0x33c/0x990 drivers/hid/hid-core.c:2365
  usbhid_probe+0xa81/0xfa0 drivers/hid/usbhid/hid-core.c:1386
  usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  usb_set_configuration+0xdf6/0x1670 drivers/usb/core/message.c:2023
  generic_probe+0x9d/0xd5 drivers/usb/core/generic.c:210
  usb_probe_device+0x99/0x100 drivers/usb/core/driver.c:266
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  usb_new_device.cold+0x6a4/0xe79 drivers/usb/core/hub.c:2536
  hub_port_connect drivers/usb/core/hub.c:5098 [inline]
  hub_port_connect_change drivers/usb/core/hub.c:5213 [inline]
  port_event drivers/usb/core/hub.c:5359 [inline]
  hub_event+0x1b5c/0x3640 drivers/usb/core/hub.c:5441
  process_one_work+0x92b/0x1530 kernel/workqueue.c:2269
  worker_thread+0x96/0xe20 kernel/workqueue.c:2415
  kthread+0x318/0x420 kernel/kthread.c:255
  ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

The buggy address belongs to the object at ffff8881cf591900
  which belongs to the cache kmalloc-512 of size 512
The buggy address is located 264 bytes inside of
  512-byte region [ffff8881cf591900, ffff8881cf591b00)
The buggy address belongs to the page:
page:ffffea00073d6400 refcount:1 mapcount:0 mapping:ffff8881da002500
index:0x0 compound_mapcount: 0
flags: 0x200000000010200(slab|head)
raw: 0200000000010200 0000000000000000 0000000100000001 ffff8881da002500
raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
  ffff8881cf591900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff8881cf591980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ffff8881cf591a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                       ^
  ffff8881cf591a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff8881cf591b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================

In order to avoid opening a disconnected device, we need to check exist
again after acquiring the existance lock, and bail out if necessary.
Reported-by: Nsyzbot <syzbot+62a1e04fd3ec2abf099e@syzkaller.appspotmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: NHillf Danton <hdanton@sina.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 01ec0a5f19c8c82960a07f6c7410fc9e01d7fb51 upstream.

The ioctl handler uses the intfdata of a second interface,
which may not be present in a broken or malicious device, hence
the intfdata needs to be checked for NULL.

[jkosina@suse.cz: fix newly added spurious space]
Reported-by: syzbot+965152643a75a56737be@syzkaller.appspotmail.com
Signed-off-by: NOliver Neukum <oneukum@suse.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 401714d9534aad8c24196b32600da683116bbe09 upstream.

We have 3 new lenovo laptops which have conexant codec 0x14f11f86,
these 3 laptops also have the noise issue when rebooting, after
letting the codec enter D3 before rebooting or poweroff, the noise
disappers.

Instead of adding a new ID again in the reboot_notify(), let us make
this function apply to all conexant codec. In theory make codec enter
D3 before rebooting or poweroff is harmless, and I tested this change
on a couple of other Lenovo laptops which have different conexant
codecs, there is no side effect so far.

Cc: stable@vger.kernel.org
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>