The driver attempts to upgrade the FW if the card has the wrong version.
Signed-off-by: NDivy Le Ray <divy@chelsio.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Limit ethtool -g/-G to the given port's queues.
Signed-off-by: NDivy Le Ray <divy@chelsio.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

We assign the return value of register_netdev to i, but return rc later
on. Fix it.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Rather than a workqueue and a per-board mutex to control PHY,
use a tasklet and spinlock. Tasklet is lower overhead and works
just as well for this.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Wheen a port on the skge driver is not used, it should
mask off interrupts from theat port.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The skge driver will deadlock if gets a transmit timeout
because the netif_tx_lock() is already held.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Allow reset of file to ATTR_NORMAL when archive bit not set
  [CIFS] Do not negotiate new POSIX_PATH_OPERATIONS_CAP yet
  [CIFS] reset mode when client notices that ATTR_READONLY is no longer set

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: IA64: fix %ll build warnings
  ACPI: IA64: fix allnoconfig build
  ACPI: Only use IPI on known broken machines (AMD, Dothan/BaniasPentium M)
  ACPI: ibm-acpi: allow module to load when acpi notifiers can't be set (v2)
  ACPI: parse 2nd MADT by default
  ACPICA: revert "acpi_serialize" changes
  sony-laptop: MAINTAINERS fix entry, add L: and W:
  ACPI: resolve HP nx6125 S3 immediate wakeup regression
  ACPI: Add support to parse 2nd MADT

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Bypass hcall stats until cpu features have run
  [POWERPC] Avoid hypervisor statistics calculation in real mode
  [POWERPC] Fix atomicity of TIF update in flush_thread()

latest -git triggers an irqtrace/lockdep warning of a leaked
irqs-off condition:

  BUG: at kernel/fork.c:1033 copy_process()

after some debugging it turns out that commit ca1b940c accidentally left
interrupts disabled - which trickled down all the way to the first time
we fork a kernel thread and triggered the warning.

the fix is to re-enable interrupts in the 'else' branch of
setup_boot_APIC_clock()'s pmtimers calibration path.
Reported-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NThomas Gleixner <tglx@brown.paperbag.linutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

lockdep's data shouldn't be used when debug_locks == 0 because it's not
updated after this, so it's more misleading than helpful.

PS: probably lockdep's current-> fields should be reset after it turns
debug_locks off: so, after printing a bug report, but before return from
exported functions, but there are really a lot of these possibilities (e.g.
 after DEBUG_LOCKS_WARN_ON), so, something could be missed.  (Of course
direct use of this fields isn't recommended either.)
Reported-by: NFolkert van Heusden <folkert@vanheusden.com>
Inspired-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NJarek Poplawski <jarkao2@o2.pl>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since freezable workqueues are broken in 2.6.21-rc
(cf. http://marc.theaimsgroup.com/?l=linux-kernel&m=116855740612755,
http://marc.theaimsgroup.com/?l=linux-kernel&m=117261312523921&w=2)
it's better to change the only user of them, which is XFS, to use "normal"
nonfreezable workqueues.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: David Chinner <dgc@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

lockdep found a bug during a run of workqueue function - this could be also
caused by a bug from other code running simultaneously.

lockdep really shouldn't be used when debug_locks == 0!
Reported-by: NFolkert van Heusden <folkert@vanheusden.com>
Inspired-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NJarek Poplawski <jarkao2@o2.pl>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It causes extra moon icons blinking on x60, and breaks at least two other
systems.

During resume, we do not know that "reboot"/"shutdown" method was used, so
we assume "plaform" and call BIOS, anyway...

This is 2.6.21 material, and should fix 2 or 3 regressions from 2.6.20.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Acked-by: N"Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Adrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make the SYSV SHM nattch counter work correctly by forcing multiple VMAs to
be produced to represent MAP_SHARED segments, even if they overlap exactly.

Using this test program:

	http://people.redhat.com/~dhowells/doshm.c

Run as:

	doshm sysv

I can see nattch going from one before the patch:

	# /doshm sysv
	Command: sysv
	shmid: 65536
	memory: 0xc3700000
	c0b00000-c0b04000 rw-p 00000000 00:00 0
	c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157  /lib/ld-uClibc-0.9.28.so
	c3180000-c31dede4 r-xs 00000000 00:0b 14582179  /lib/libuClibc-0.9.28.so
	c3520000-c352278c rw-p 00000000 00:0b 13763417  /doshm
	c3584000-c35865e8 r-xs 00000000 00:0b 13763417  /doshm
	c3588000-c358aa00 rw-p 00008000 00:0b 14582157  /lib/ld-uClibc-0.9.28.so
	c3590000-c359b6c0 rw-p 00000000 00:00 0
	c3620000-c3640000 rwxp 00000000 00:00 0
	c3700000-c37fa000 rw-S 00000000 00:06 1411      /SYSV00000000 (deleted)
	c3700000-c37fa000 rw-S 00000000 00:06 1411      /SYSV00000000 (deleted)
	nattch 1

To two after the patch:

	# /doshm sysv
	Command: sysv
	shmid: 0
	memory: 0xc3700000
	c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157  /lib/ld-uClibc-0.9.28.so
	c3180000-c31dede4 r-xs 00000000 00:0b 14582179  /lib/libuClibc-0.9.28.so
	c3320000-c3340000 rwxp 00000000 00:00 0
	c3530000-c35325e8 r-xs 00000000 00:0b 13763417  /doshm
	c3534000-c353678c rw-p 00000000 00:0b 13763417  /doshm
	c3538000-c353aa00 rw-p 00008000 00:0b 14582157  /lib/ld-uClibc-0.9.28.so
	c3590000-c359b6c0 rw-p 00000000 00:00 0
	c35a4000-c35a8000 rw-p 00000000 00:00 0
	c3700000-c37fa000 rw-S 00000000 00:06 1369      /SYSV00000000 (deleted)
	c3700000-c37fa000 rw-S 00000000 00:06 1369      /SYSV00000000 (deleted)
	nattch 2

That's +1 to nattch for each shmat() made.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Supply a get_unmapped_area() to fix NOMMU SYSV SHM support.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NAdam Litke <agl@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix unannotated variable declarations.  Variables that have allocation
section annotations (such as __meminitdata) on their definitions must also
have them on their declarations as not doing so may affect the addressing
mode used by the compiler and may result in a linker error.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The local APIC timer stops to work in deeper C-States.  This is handled by
the ACPI code and a broadcast mechanism in the clockevents / tick managment
code.

Some systems do not expose the deeper C-States to the kernel, but switch
into deeper C-States behind the kernels back.  This delays the local apic
timer interrupts for ever and makes the systems unusable.

Add a command line option to disable the local apic timer and a dmi
quirk for known broken systems.

Andi sayeth:

  While not wrong by itself i think it is still better to use some heuristic
  -- like "has battery in ACPI" With the DMI table if the problem is more wide
  spread we will just continue extending it.

  But anyways should be ok now for .21 although I'm not really happy with
  it.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Grudgingly-acked-by: NAndi Kleen <ak@suse.de>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The SNAPSHOT_S2RAM ioctl does not disable the nonboot CPUs before entering
the suspend, although it should do this.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I added the 'Q' to list. A short description in the `Ok, so what can I
use them for'-section, on when or why to use it would be nice!
Signed-off-by: NJohannes Weiner <hannes-kernel@saeurebad.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

NULL checks should be before the first dereference.

Spotted by the Coverity checker.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NOndrej Zajicek <santiago@crfreenet.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c/ds1374: Check workqueue creation status
  i2c-i801: Restore the device state before leaving
  i2c-amd8111: Missed cleanup

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NETFILTER]: nat: avoid rerouting packets if only XFRM policy key changed
  [NETFILTER]: nf_conntrack_netlink: add missing dependency on NF_NAT
  [NET]: fix up misplaced inlines.
  [SCTP]: Correctly reset ssthresh when restarting association
  [BRIDGE]: Fix fdb RCU race
  [NET]: Fix fib_rules dump race
  [XFRM]: ipsecv6 needs a space when printing audit record.
  [X25] x25_forward_call(): fix NULL dereferences
  [SCTP]: Reset some transport and association variables on restart
  [SCTP]: Increment error counters on user requested HBs.
  [SCTP]: Clean up stale data during association restart
  [IrDA]: Calling ppp_unregister_channel() from process context
  [IrDA]: irttp_dup spin_lock initialisation
  [IrDA]: Delay needed when uploading firmware chunks

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ipoib: Fix thinko in packet length checks
  IPoIB: Fix use-after-free in path_rec_completion()
  IB/ehca: Make scaling code work without CPU hotplug
  RDMA/cxgb3: Handle build_phys_page_list() failure in iwch_reregister_phys_mem()
  IB/ipath: Check return value of lookup_one_len
  IPoIB: Fix race in detaching from mcast group before attaching
  IPoIB/cm: Fix reaping of stale connections

The PIT has no dedicated mode for shut down. The only way to disable PIT
is to put it into one shot mode. AMD implementations of PIT on Geode
(also observed on Cyrix) are confused by an "empty" transition from
CLOCK_EVT_MODE_UNUSED to CLOCK_EVT_MODE_SHUTDOWN, which puts the PIT
into one shot mode momentarily.

I realized after staring helpless at the bug report
http://bugzilla.kernel.org/show_bug.cgi?id=8027 for quite a while, that
the only change, which might influence the bogomips calibration, is the
above transition during the PIT initialization.

Avoiding the unnecessary switch to oneshot and later to periodic mode
fixes the weird bogomips value and also the resulting slowness.

The fix is confirmed on OLPC and another Geode based box.

Note: this is unrelated to the Dual Core problem discussed here:
http://lkml.org/lkml/2007/3/17/48Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When a file had a dos attribute of 0x1 (readonly - but dos attribute
of archive was not set) - doing chmod 0777 or equivalent would
try to set a dos attribute of 0 (which some servers ignore)
rather than ATTR_NORMAL (0x20) which most servers accept.
Does not affect servers which support the CIFS Unix Extensions.
Acked-by: NPrasad Potluri <pvp@us.ibm.com>
Acked-by: NShirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

The packet length checks in ipoib are broken: we add 4 bytes (IPoIB
encapsulation header) when sending a packet, not 20 bytes (hardware
address length) to each packet.  Therefore, if connected mode is
enabled so that the interface MTU is larger than the multicast MTU,
IPoIB may end up trying to send too-long multicast packets.  For
example, multicast is broken if a message of size 2048 bytes is sent
on an interface with UD MTU 2048, because 2048 is bigger than the real
limit of 2044 but the code tests against the wrong limit of 2060.

This patch fixes <https://bugs.openfabrics.org/show_bug.cgi?id=418>,
submitted by Scott Weitzenkamp <sweitzen@cisco.com>.
Signed-off-by: NMichael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The connected mode code added the possibility that an neigh struct
gets freed in the list_for_each_entry() loop in path_rec_completion(),
which causes a use-after-free.  Fix this by changing to the _safe
variant of the list walking macro.

This was spotted by the Coverity checker (CID 1567).
Signed-off-by: NMichael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

eHCA scaling code must not depend on register_cpu_notifier() if
CONFIG_HOTPLUG_CPU is not set, so put all related code into #ifdefs.
Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

This fixes kernel.org bug 8003.
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

There's a race between ipoib_mcast_leave() and ipoib_mcast_join_finish()
where we can try to detach from a multicast group before we've
attached to it.  Fix this by reordering the code in ipoib_mcast_leave
to free the multicast group first, which waits for the multicast
callback thread (which calls ipoib_mcast_join_finish()) to complete
before detaching from the group.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The sense of the time_after_eq() test in ipoib_cm_stale_task() is
reversed so that only non-stale connections are reaped.  Fix this by
changing to time_before_eq().

Noticed by Pradeep Satyanarayana <pradeep@us.ibm.com>.
Signed-off-by: NMichael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Currently NAT not only reroutes packets in the OUTPUT chain when the
routing key changed, but also if only the non-routing part of the
IPsec policy key changed. This breaks ping -I since it doesn't use
SO_BINDTODEVICE but IP_PKTINFO cmsg to specify the output device, and
this information is lost.

Only do full rerouting if the routing key changed, and just do a new
policy lookup with the old route if only the ports changed.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

NF_CT_NETLINK=y, NF_NAT=m results in:

 LD      .tmp_vmlinux1
 net/built-in.o: dans la fonction « nfnetlink_parse_nat_proto »:
 nf_conntrack_netlink.c:(.text+0x28db9): référence indéfinie vers « nf_nat_proto_find_get »
 nf_conntrack_netlink.c:(.text+0x28dd6): référence indéfinie vers « nf_nat_proto_put »
 net/built-in.o: dans la fonction « ctnetlink_new_conntrack »:
 nf_conntrack_netlink.c:(.text+0x29959): référence indéfinie vers « nf_nat_setup_info »
 nf_conntrack_netlink.c:(.text+0x29b35): référence indéfinie vers « nf_nat_setup_info »
 nf_conntrack_netlink.c:(.text+0x29cf7): référence indéfinie vers « nf_nat_setup_info »
 nf_conntrack_netlink.c:(.text+0x29de2): référence indéfinie vers « nf_nat_setup_info »
 make: *** [.tmp_vmlinux1] Erreur 1 

Reported by Kevin Baradon <kevin.baradon@gmail.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Turning up the warnings on gcc makes it emit warnings
about the placement of 'inline' in function declarations.
Here's everything that was under net/
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reset ssthresh to the correct value (peer's a_rwnd) when restarting
association.
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

br_fdb_get use atomic_inc to increase the refcount of an element found
on a RCU protected list, which can lead to the following race:

CPU0					CPU1

					br_fdb_get:   rcu_read_lock
					__br_fdb_get: find element
fdb_delete:   hlist_del_rcu
	      br_fdb_put
br_fdb_put:   atomic_dec_and_test
	      call_rcu(fdb_rcu_free)	br_fdb_get:   atomic_inc
						      rcu_read_unlock
fdb_rcu_free: kmem_cache_free

Use atomic_inc_not_zero instead.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

fib_rules_dump needs to use list_for_each_entry_rcu to protect against
concurrent changes to the rules list.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Check if workqueue creation failed.  Further usage of NULL pointed
workqueue is not good I guess ;)
Signed-off-by: NCyrill V. Gorcunov <gorcunov@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJean Delvare <khali@linux-fr.org>