- 20 3月, 2014 1 次提交
-
-
由 Mengdong Lin 提交于
This is a temporary fix for some Intel HDMI codecs to avoid no sound output for a resuming playback after S3. After S3, the audio driver restores pin:cvt connection selections by snd_hda_codec_resume_cache(). However this can happen before the gfx side is ready and such connect selection is overlooked by HW. After gfx is ready, the pins make the default selection again. And this will cause multiple pins share a same convertor and mute control will affect each other. Thus a resumed audio playback become silent after S3. This patch verifies pin:cvt connection on preparing a stream, to assure the pin selects the right convetor and an assigned convertor is not shared by other unused pins. Apply this fix-up on Haswell, Broadwell and Valleyview (Baytrail). We need this temporary fix before a reliable software communication channel is established between audio and gfx, to sync audio/gfx operations. Signed-off-by: NMengdong Lin <mengdong.lin@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 18 3月, 2014 5 次提交
-
-
由 Takashi Iwai 提交于
-
由 Kailang Yang 提交于
Restore the registers to prevent the abnormal digital power supply rising ratio/sequence to the codec and causing the incorrect default codec register restoration during initialization. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
由 Kailang Yang 提交于
When the power state of ALC283 codec goes to D3 or return back to D0, it gives a noise via headphone output. To follow the depop procedure, it will be better. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
Restore the registers to prevent the abnormal digital power supply rising ratio/sequence to the codec and causing the incorrect default codec register restoration during initialization. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=71861Signed-off-by: NKailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 14 3月, 2014 5 次提交
-
-
由 Takashi Iwai 提交于
Merge tag 'tlv320aic31xx-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Fixes for tlv320aic31xx A few fixes for issues not yet identified by the zero day tester due to the last pull request being rushed in order to clean up the problem with the git mismerge.
-
由 Takashi Iwai 提交于
Merge tag 'asoc-v3.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Updates for v3.15 This is mostly a few additional fixes from Lars-Peter, a new driver and cleaning up a git failure with merging the Intel branch (combined with an xargs failure to pay attention to error codes). The history lists a bunch of additional commits for the branch but the content of those commits is actually present already but not recorded in history due to git failing. Unfortunately xargs is used in the merge script and it doesn't do a good job of noticing errors from the commands it invokes.
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Jyri Sarha 提交于
Remove snd_soc_codec_set_cache_io(codec, 8, 8, SND_SOC_REGMAP) call and codec->control_data = aic31xx->regmap assignment since that already done by core. Signed-off-by: NJyri Sarha <jsarha@ti.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Jyri Sarha 提交于
Fix "warning: unused variable 'aic31xx'" from function 'aic31xx_clk_off'. Signed-off-by: NJyri Sarha <jsarha@ti.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 13 3月, 2014 29 次提交
-
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
ASoC: Updates for v3.15 Quite a busy release for ASoC this time, more on janitorial work than exciting new features but welcome nontheless: - Lots of cleanups from Takashi for enumerations; the original API for these was error prone so he's refactored lots of code to use more modern APIs which avoid issues. - Elimination of the ASoC level wrappers for I2C and SPI moving us closer to converting to regmap completely and avoiding some randconfig hassle. - Provide both manually and transparently locked DAPM APIs rather than a mix of the two fixing some concurrency issues. - Start converting CODEC drivers to use separate bus interface drivers rather than having them all in one file helping avoid dependency issues. - DPCM support for Intel Haswell and Bay Trail platforms. - Lots of work on improvements for simple-card, DaVinci and the Renesas rcar drivers. - New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the CSR SiRF SoC. # gpg: Signature made Wed 12 Mar 2014 23:05:45 GMT using RSA key ID 7EA229BD # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
ASoC: Fixes for v3.14 A few things here: - Avoid memory leaks in error cases with DPCM, this code has never been that well tested in mainline due to the lack of mainline drivers but we now have one queued for the merge window! - Fix the N810 audio driver to load when booted with DT since the platform was converted to DT during the merge window. - Fixes for initialisation of some MFD drivers that are probably unused in mainline # gpg: Signature made Mon 10 Mar 2014 18:21:32 GMT using RSA key ID 7EA229BD # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
-
由 Mark Brown 提交于
ASoC: Updates for v3.15 Quite a busy release for ASoC this time, more on janitorial work than exciting new features but welcome nontheless: - Lots of cleanups from Takashi for enumerations; the original API for these was error prone so he's refactored lots of code to use more modern APIs which avoid issues. - Elimination of the ASoC level wrappers for I2C and SPI moving us closer to converting to regmap completely and avoiding some randconfig hassle. - Provide both manually and transparently locked DAPM APIs rather than a mix of the two fixing some concurrency issues. - Start converting CODEC drivers to use separate bus interface drivers rather than having them all in one file helping avoid dependency issues. - DPCM support for Intel Haswell and Bay Trail platforms. - Lots of work on improvements for simple-card, DaVinci and the Renesas rcar drivers. - New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the CSR SiRF SoC. Conflicts: sound/soc/intel/Kconfig
-
由 Jyri Sarha 提交于
This commit adds a bare bones driver support for TLV320AIC31XX family audio codecs. The driver adds basic stereo playback trough headphone and speaker outputs and mono capture trough microphone inputs. The driver is currently missing support at least for mini DSP features and jack detection. I have tested the driver only on TLV320AIC3111, but based on the data sheets TLV320AIC3100, TLV320AIC3110, and TLV320AIC3120 should work Ok too. The base for the implementation was taken from: git@gitorious.org:ti-codecs/ti-codecs.git ajitk/topics/k3.10.1-aic31xx -branch at commit 77504eba0294764e9e63b4a0c696b44db187cd13. Signed-off-by: NJyri Sarha <jsarha@ti.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
Use table based setup to register the DAPM widgets and routes. This on one hand makes the code a bit shorter and cleaner and on the other hand the board level DAPM elements get registered in the card's DAPM context rather than in the CODEC's DAPM context. While we are at it also remove the snd_soc_dapm_enable_pin() in the init callback, since pins are enabled by default. Also drop the snd_soc_dapm_sync() calls, since they are ignored by the core anyway until the card has been fully instantiated. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Stephen Warren 提交于
The rt5640 driver won't compile without I2C enabled. Hence, the Intel Haswell and Baytrail+RT5640 ASoC drivers must also depend on I2C, since these select RT5640. This solves: sound/soc/codecs/rt5640.c:2220:1: warning: data definition has no type or storage class [enabled by default] sound/soc/codecs/rt5640.c:2220:1: error: type defaults to ‘int’ in declaration of ‘module_i2c_driver’ [-Werror=implicit-int] sound/soc/codecs/rt5640.c:2220:1: warning: parameter names (without types) in function declaration [enabled by default] sound/soc/codecs/rt5640.c:2210:26: warning: ‘rt5640_i2c_driver’ defined but not used [-Wunused-variable] Reported-by: NJim Davis <jim.epost@gmail.com> Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
Use table based setup to register the controls and DAPM widgets and routes. This on one hand makes the code a bit shorter and cleaner and on the other hand the board level DAPM elements get registered in the card's DAPM context rather than in the CODEC's DAPM context. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
Use table based setup to register the controls and DAPM widgets and routes. This on one hand makes the code a bit shorter and cleaner and on the other hand the board level DAPM elements get registered in the card's DAPM context rather than in the CODEC's DAPM context. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Mark Brown 提交于
Merge branch 'topic/dapm' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-pxa
-
由 Lars-Peter Clausen 提交于
Use table based setup to register the DAPM widgets and routes. This on one hand makes the code a bit shorter and cleaner and on the other hand the board level DAPM elements get registered in the card's DAPM context rather than in the CODEC's DAPM context. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
snd_soc_dapm_mutex_unlock() wants a pointer to the DAPM context, not the CODEC. Fixes: 03510ca0 ("ASoC: ams-delta: Update locking around use of DAPM pin API") Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound由 Takashi Iwai 提交于
ASoC: Updates for v3.15 Quite a busy release for ASoC this time, more on janitorial work than exciting new features but welcome nontheless: - Lots of cleanups from Takashi for enumerations; the original API for these was error prone so he's refactored lots of code to use more modern APIs which avoid issues. - Elimination of the ASoC level wrappers for I2C and SPI moving us closer to converting to regmap completely and avoiding some randconfig hassle. - Provide both manually and transparently locked DAPM APIs rather than a mix of the two fixing some concurrency issues. - Start converting CODEC drivers to use separate bus interface drivers rather than having them all in one file helping avoid dependency issues. - DPCM support for Intel Haswell and Bay Trail platforms. - Lots of work on improvements for simple-card, DaVinci and the Renesas rcar drivers. - New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the CSR SiRF SoC.
-
由 Mark Brown 提交于
Merge remote-tracking branches 'asoc/topic/wm8996', 'asoc/topic/wm9081' and 'asoc/topic/wm9705' into asoc-next
-
由 Mark Brown 提交于
Merge remote-tracking branches 'asoc/topic/wm8961', 'asoc/topic/wm8962', 'asoc/topic/wm8974', 'asoc/topic/wm8983', 'asoc/topic/wm8988', 'asoc/topic/wm8990', 'asoc/topic/wm8991', 'asoc/topic/wm8993' and 'asoc/topic/wm8994' into asoc-next
-