fusion_context structure is very large around 180kB and most of the size
is contributed by log_to_span array. Move log_to_span out of fusion
context and have separate allocation for log_to_span. And use kmalloc to
allocate fusion_context.  Currently kmemleak reports 1000s of false
positives for fusion->cmd_list[]. kmemleak does not track page
allocation for fusion_context. This change will also fix the false
positives reported by kmemleak.

Ref: https://marc.info/?l=linux-scsi&m=150545293900917Reported-by: NShu Wang <shuwang@redhat.com>
Signed-off-by: NKashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: NShivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

No functional change.
Signed-off-by: NKashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: NShivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NKashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: NShivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Increase code readability. No functional change.
Signed-off-by: NKashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: NShivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add support for PCI VID/DID 0x1000/0x0015 based MegaRAID controllers.
Since the DID 0x0015 conflicts with DELL PERC5 controllers,
add vendor ID based check specific for DELL PERC5.
Signed-off-by: NKashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: NShivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

No functional change.
Refactor adapter_type to set for all generation controllers, not
just for fusion controllers.
Signed-off-by: NKashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: NShivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Reviewed-by: NGerry Morong <gerry.morong@microsemi.com>
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add support for enclosure logical identifier
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Suggested-by: NMartin Wilck <mwilck@suse.com>
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Preserve external device queue depth during a scan operation.
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Correct re-enabling ioaccel after:
  1) RAID transformations and
  2) multi-path fail-overs.
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

There are times when the DEFAULT_TIMEOUT (30 seconds) is not enough.
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Correct a corner case where newly created volumes are not detected
automatically on an external RAID controller that has no configured
volumes during initial device discovery.

The fix is to set the discovery_polling flag when an external RAID
controller is detected. This causes a device rescan every 20-30 seconds,
so that newly created volumes will be detected automatically.
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Tell hpsa controller to generate a checkpoint for rare lockup
conditions.
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

clean up stale information.
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

I am resubmitting this patch on behalf of Martin Wilck with his
permission.

The original patch can be found here:
https://www.spinics.net/lists/linux-scsi/msg102083.html

This patch did not help until Hannes's
commit 9441284fbc39 ("scsi-fixup-kernel-warning-during-rmmod")
was applied to the kernel.

--------------------------------------
Original patch description from Martin:
--------------------------------------

When the hpsa module is unloaded using rmmod, dangling
symlinks remain under /sys/class/sas_phy. Fix this by
calling sas_phy_delete() rather than sas_phy_free (which,
according to comments, should not be called for PHYs that
have been set up successfully, anyway).
Tested-by: NDon Brace <don.brace@microsemi.com>
Reviewed-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin Wilck <mwilck@suse.de>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch cleans up a lot of warnings when unloading the driver.

A current example of the stack trace starts with:
    [  142.570715] sysfs group 'power' not found for kobject 'port-5:0'
There can be hundreds of these messages during a driver unload.

I am resubmitting this patch on behalf of Martin Wilck with his
permission.

His original patch can be found here:
https://www.spinics.net/lists/linux-scsi/msg102085.html

This patch did not help until Hannes's
commit 9441284fbc39 ("scsi-fixup-kernel-warning-during-rmmod")
was applied to the kernel.

---------------------------
Original patch description:
---------------------------

Unloading the hpsa driver causes warnings

[ 1063.793652] WARNING: CPU: 1 PID: 4850 at ../fs/sysfs/group.c:237 device_del+0x54/0x240()
[ 1063.793659] sysfs group ffffffff81cf21a0 not found for kobject 'port-2:0'

with two different stacks:
1)
[ 1063.793774]  [<ffffffff81448af4>] device_del+0x54/0x240
[ 1063.793780]  [<ffffffff8145178a>] transport_remove_classdev+0x4a/0x60
[ 1063.793784]  [<ffffffff81451216>] attribute_container_device_trigger+0xa6/0xb0
[ 1063.793802]  [<ffffffffa0105d46>] sas_port_delete+0x126/0x160 [scsi_transport_sas]
[ 1063.793819]  [<ffffffffa036ebcc>] hpsa_free_sas_port+0x3c/0x70 [hpsa]

2)
[ 1063.797103]  [<ffffffff81448af4>] device_del+0x54/0x240
[ 1063.797118]  [<ffffffffa0105d4e>] sas_port_delete+0x12e/0x160 [scsi_transport_sas]
[ 1063.797134]  [<ffffffffa036ebcc>] hpsa_free_sas_port+0x3c/0x70 [hpsa]

This is caused by the fact that host device hostX is deleted before the
SAS transport devices hostX/port-a:b.

This patch fixes this by reverting the order of device deletions.
Tested-by: NDon Brace <don.brace@microsemi.com>
Reviewed-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin Wilck <mwilck@suse.de>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Correct spelling error.
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Ever since it became possible to compile the SCSI core code as a module,
the documentation describing the module parameters has been incorrect.
Update the documentation to add a "scsi_mod." prefix to the relevant
options.
Reported-by: NLaurence Oberman <loberman@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Corrected the value defined for LINKRATE_60 (6 Gig).
Signed-off-by: NRaj Dinesh <Raj.Dinesh@microsemi.com>
Signed-off-by: NViswas G <viswas.g@microsemi.com>
Acked-by: NJack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

when there's an error in 'ncq mode' the host has to read the ncq error
log (10h) to clear the error state. however, the ccb that is setup for
doing this doesn't setup the ccb so that the previous state is
cleared. if the ccb was previously used for an IO n_elems is set and
pm8001_ccb_task_free() treats this as the signal to go free a
scatter-gather list (that's already been freed).
Signed-off-by: NDeepak Ukey <deepak.ukey@microsemi.com>
Signed-off-by: NViswas G <Viswas.G@microsemi.com>
Acked-by: NJack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Modified SATA abort handling with following steps:

1) Set device state as recovery.
2) Send phy reset.
3) Wait for reset completion.
4) After successful reset, abort all IO's to the device.
5) After aborting all IO's to device, set device state as operational.
Signed-off-by: NDeepak Ukey <deepak.ukey@microsemi.com>
Signed-off-by: NViswas G <Viswas.G@microsemi.com>
Acked-by: NJack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Added port reset timer value as 2000ms for PM8006 sata controller.
Signed-off-by: NDeepak Ukey <deepak.ukey@microsemi.com>
Signed-off-by: NViswas G <Viswas.G@microsemi.com>
Acked-by: NJack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NDeepak Ukey <deepak.ukey@microsemi.com>
Signed-off-by: NViswas G <Viswas.G@microsemi.com>
Acked-by: NJack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

tag is taken from the tag pool instead of using the hardcoded tag
value(1).
Signed-off-by: NDeepak Ukey <deepak.ukey@microsemi.com>
Signed-off-by: NViswas G <Viswas.G@microsemi.com>
Acked-by: NJack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Different SAS addresses are assigned for each set of phys.
Signed-off-by: NViswas G <Viswas.G@microsemi.com>
Acked-by: NJack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Added support to read ILA version and inactive firmware version from MPI
configuration table and export through sysfs.
Signed-off-by: NDeepak Ukey <deepak.ukey@microsemi.com>
Signed-off-by: NViswas G <Viswas.G@microsemi.com>
Acked-by: NJack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

sas_identify structure defined by pm80xx doesn't have CRC field.  So
added a new sas_identify structure without CRC.
Signed-off-by: NRaj Dinesh <Raj.Dinesh@microsemi.com>
Signed-off-by: NViswas G <Viswas.G@microsemi.com>
Acked-by: NJack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

As per SAM there is a status precedence, with any sense code 29/XX
taking second place just after an ACA ACTIVE status.  Additionally, each
target might prefer to not queue any unit attention conditions, but just
report one.  Due to the above, this will be that one with the highest
precedence.  This results in the sense code 29/XX effectively
overwriting any other unit attention.  Hence we should report the
power-on reset to userland so that it can take appropriate action.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Hitachi USP-V returns 'ILLEGAL FUNCTION' when the internal staging
mechanism encountered an error. These errors should not be retried on
another path.

[mkp: s/invalid/illegal/]
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

All EMC SYMMETRIX support REPORT_LUNS, even if configured to report
SCSI-2 for whatever reason.
Signed-off-by: NKurt Garloff <garloff@suse.de>
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

HITACHI is always supporting VPD pages, even though it's claiming to
support SCSI Revision 3 only.
Signed-off-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The AIX VDASD devices do support VPD pages, but implement only SPC. So
set BLIST_TRY_VPD_PAGES to correctly display the VPD information in
sysfs.

[mkp: typo]
Signed-off-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

/sys/class/scsi_disk/0:2:0:0/manage_start_stop can be changed to 0
unexpectly by writing an invalid string.
Signed-off-by: Nweiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

/sys/class/scsi_disk/0:2:0:0/allow_restart can be changed to 0
unexpectedly by writing an invalid string such as the following:

echo asdf > /sys/class/scsi_disk/0:2:0:0/allow_restart
Signed-off-by: Nweiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When checking the model and vendor string we need to use the minimum
value of either string, otherwise we'll miss out on wildcard matches.

And we should take care when matching with zero size strings; results
might be unpredictable.  With this patch the rules for matching devinfo
strings are as follows:

- Vendor strings must match exactly
- Empty Model strings will only match if the devinfo model
  is also empty
- Model strings shorter than the devinfo model string will
  not match

Fixes: 5e7ff2ca ("SCSI: fix new bug in scsi_dev_info_list string matching")
Signed-off-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NAlan Stern <stern@rowland.harvard.edu>
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Reformat blacklist flags to make the values easier to read and to
enhance error checking.
Signed-off-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NBart van Assche <bart.vanassche@wdc.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Each scsi device is scanned according to the found blacklist flags, but
this information is never presented to sysfs.  This makes it quite hard
to figure out if blacklisting worked as expected.  With this patch we're
exporting an additional attribute 'blacklist' containing the blacklist
flags for this device.
Signed-off-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>