At few places we could use BLK_STS_OK and BLK_STS_NOSUPP.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NSatoru Taekeuchi <satoru.takeuchi@gmail.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ dropped first hunk btrfs_endio_direct_read ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently even if the underlying disk reports failure on IO,
compressed read endio still gets to verify checksum and reports it as
a checksum error.

In fact, if some IO have failed during reading a compressed data
extent , there's no way the checksum could match, therefore, we can
skip that in order to return error quickly to the upper layer.

Please note that we need to do this after recording the failed mirror
index so that read-repair in the upper layer's endio can work
properly.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Tested-by: NPaul Jones <paul@pauljones.id.au>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The kernel oops happens at

kernel BUG at fs/btrfs/extent_io.c:2104!
...
RIP: clean_io_failure+0x263/0x2a0 [btrfs]

It's showing that read-repair code is using an improper mirror index.
This is due to the fact that compression read's endio hasn't recorded
the failed mirror index in %cb->orig_bio.

With this, btrfs's read-repair can work properly on reading compressed
data.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reported-by: NPaul Jones <paul@pauljones.id.au>
Tested-by: NPaul Jones <paul@pauljones.id.au>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Add skeleton code for compresison heuristics. Now it iterates over all
the pages, but in the end always says "yes, compress please", ie it does
not change the current behaviour.

In the future we're going to add various heuristics to analyze the data.
This patch can be used as a baseline for measuring if the effectivness
and performance.
Signed-off-by: NTimofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ enhanced changelog, modified comments ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

find_workspace() allocates up to num_online_cpus() + 1 workspaces.
free_workspace() will only keep num_online_cpus() workspaces. When
(de)compressing we will allocate num_online_cpus() + 1 workspaces, then
free one, and repeat. Instead, we can just keep num_online_cpus() + 1
workspaces around, and never have to allocate/free another workspace in the
common case.

I tested on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM. I mounted a
BtrFS partition with -o compress-force={lzo,zlib,zstd} and logged whenever
a workspace was allocated of freed. Then I copied vmlinux (527 MB) to the
partition. Before the patch, during the copy it would allocate and free 5-6
workspaces. After, it only allocated the initial 3. This held true for lzo,
zlib, and zstd. The time it took to execute cp vmlinux /mnt/btrfs && sync
dropped from 1.70s to 1.44s with lzo compression, and from 2.04s to 1.80s
for zstd compression.
Signed-off-by: NNick Terrell <terrelln@fb.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Add zstd compression and decompression support to BtrFS. zstd at its
fastest level compresses almost as well as zlib, while offering much
faster compression and decompression, approaching lzo speeds.

I benchmarked btrfs with zstd compression against no compression, lzo
compression, and zlib compression. I benchmarked two scenarios. Copying
a set of files to btrfs, and then reading the files. Copying a tarball
to btrfs, extracting it to btrfs, and then reading the extracted files.
After every operation, I call `sync` and include the sync time.
Between every pair of operations I unmount and remount the filesystem
to avoid caching. The benchmark files can be found in the upstream
zstd source repository under
`contrib/linux-kernel/{btrfs-benchmark.sh,btrfs-extract-benchmark.sh}`
[1] [2].

I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM.
The VM is running on a MacBook Pro with a 3.1 GHz Intel Core i7 processor,
16 GB of RAM, and a SSD.

The first compression benchmark is copying 10 copies of the unzipped
Silesia corpus [3] into a BtrFS filesystem mounted with
`-o compress-force=Method`. The decompression benchmark times how long
it takes to `tar` all 10 copies into `/dev/null`. The compression ratio is
measured by comparing the output of `df` and `du`. See the benchmark file
[1] for details. I benchmarked multiple zstd compression levels, although
the patch uses zstd level 1.

| Method  | Ratio | Compression MB/s | Decompression speed |
|---------|-------|------------------|---------------------|
| None    |  0.99 |              504 |                 686 |
| lzo     |  1.66 |              398 |                 442 |
| zlib    |  2.58 |               65 |                 241 |
| zstd 1  |  2.57 |              260 |                 383 |
| zstd 3  |  2.71 |              174 |                 408 |
| zstd 6  |  2.87 |               70 |                 398 |
| zstd 9  |  2.92 |               43 |                 406 |
| zstd 12 |  2.93 |               21 |                 408 |
| zstd 15 |  3.01 |               11 |                 354 |

The next benchmark first copies `linux-4.11.6.tar` [4] to btrfs. Then it
measures the compression ratio, extracts the tar, and deletes the tar.
Then it measures the compression ratio again, and `tar`s the extracted
files into `/dev/null`. See the benchmark file [2] for details.

| Method | Tar Ratio | Extract Ratio | Copy (s) | Extract (s)| Read (s) |
|--------|-----------|---------------|----------|------------|----------|
| None   |      0.97 |          0.78 |    0.981 |      5.501 |    8.807 |
| lzo    |      2.06 |          1.38 |    1.631 |      8.458 |    8.585 |
| zlib   |      3.40 |          1.86 |    7.750 |     21.544 |   11.744 |
| zstd 1 |      3.57 |          1.85 |    2.579 |     11.479 |    9.389 |

[1] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/btrfs-benchmark.sh
[2] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/btrfs-extract-benchmark.sh
[3] http://sun.aei.polsl.pl/~sdeor/index.php?page=silesia
[4] https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-4.11.6.tar.xz

zstd source repository: https://github.com/facebook/zstdSigned-off-by: NNick Terrell <terrelln@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

We've started using cloned bios more in 4.13, there are some specifics
regarding the iteration.  Filipe found [1] that the raid56 iterated a
cloned bio using bio_for_each_segment_all, which is incorrect. The
cloned bios have wrong bi_vcnt and this could lead to silent
corruptions.  This patch adds assertions to all remaining
bio_for_each_segment_all cases.

[1] https://patchwork.kernel.org/patch/9838535/Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This function is supposed to return blk_status_t error codes now but
there was a stray -ENOMEM left behind.

Fixes: 4e4cbee9 ("block: switch bios to blk_status_t")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Most callers of btrfs_bio_alloc convert from bytes to sectors. Hide that
in the helper and simplify the logic in the callsers.
Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

compressed_bio_alloc is now a trivial wrapper around btrfs_bio_alloc, no
point keeping it. The error handling can be simplified, as we know
btrfs_bio_alloc will never fail.
Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

All callers pass gfp_flags=GFP_NOFS and nr_vecs=BIO_MAX_PAGES.

submit_extent_page adds __GFP_HIGH that does not make a difference in
our case as it allows access to memory reserves but otherwise does not
change the constraints.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The workspaces are preallocated at the beginning where we can safely use
GFP_KERNEL, but in some cases the find_workspace might reach the
allocation again, now in a more restricted context when the bios or
pages are being compressed.

To avoid potential lockup when alloc_workspace -> vmalloc would silently
use the GFP_KERNEL, add the memalloc_nofs helpers around the critical
call site.
Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

struct compressed_bio pointer can be used instead.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Instead of sending each argument of struct compressed_bio, send
the compressed_bio itself.

Also by having struct compressed_bio in btrfs_decompress_bio()
it would help tracing.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Replace bi_error with a new bi_status to allow for a clear conversion.
Note that device mapper overloaded bi_error with a private value, which
we'll have to keep arround at least for now and thus propagate to a
proper blk_status_t value.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NHans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NDavid Windsor <dwindsor@gmail.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The value of max_out can be calculated from the parameters passed to the
compressors, which is number of pages and the page size, and we don't
have to needlessly pass it around.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The parameter saying how many pages can be allocated at maximum can be
merged with the output page counter, to save some stack space.  The
compression implementation will sink the parameter to a local variable
so everything works as before.

The nr_pages variables can also be simply merged in compress_file_range
into one.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The length parameter is basically duplicated for input and output in the
top level caller of the compress_pages chain. We can simply use one
variable for that and reduce stack consumption. The compression
implementation will sink the parameter to a local variable so everything
works as before.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The original csum error message only outputs inode number, offset, check
sum and expected check sum.

However no root objectid is outputted, which sometimes makes debugging
quite painful under multi-subvolume case (including relocation).

Also the checksum output is decimal, which seldom makes sense for
users/developers and is hard to read in most time.

This patch will add root objectid, which will be %lld for rootid larger
than LAST_FREE_OBJECTID, and hex csum output for better readability.
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently btrfs_ino takes a struct inode and this causes a lot of
internal btrfs functions which consume this ino to take a VFS inode,
rather than btrfs' own struct btrfs_inode. In order to fix this "leak"
of VFS structs into the internals of btrfs first it's necessary to
eliminate all uses of struct inode for the purpose of inode. This patch
does that by using BTRFS_I to convert an inode to btrfs_inode. With
this problem eliminated subsequent patches will start eliminating the
passing of struct inode altogether, eventually resulting in a lot cleaner
code.
Signed-off-by: NNikolay Borisov <n.borisov.lkml@gmail.com>
[ fix btrfs_get_extent tracepoint prototype ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

If btrfs_decompress_buf2page() is handed a bio with its page in the
middle of the working buffer, then we adjust the offset into the working
buffer. After we copy into the bio, we advance the iterator by the
number of bytes we copied. Then, we have some logic to handle the case
of discontiguous pages and adjust the offset into the working buffer
again. However, if we didn't advance the bio to a new page, we may enter
this case in error, essentially repeating the adjustment that we already
made when we entered the function. The end result is bogus data in the
bio.

Previously, we only checked for this case when we advanced to a new
page, but the conversion to bio iterators changed that. This restores
the old, correct behavior.

A case I saw when testing with zlib was:

    buf_start = 42769
    total_out = 46865
    working_bytes = total_out - buf_start = 4096
    start_byte = 45056

The condition (total_out > start_byte && buf_start < start_byte) is
true, so we adjust the offset:

    buf_offset = start_byte - buf_start = 2287
    working_bytes -= buf_offset = 1809
    current_buf_start = buf_start = 42769

Then, we copy

    bytes = min(bvec.bv_len, PAGE_SIZE - buf_offset, working_bytes) = 1809
    buf_offset += bytes = 4096
    working_bytes -= bytes = 0
    current_buf_start += bytes = 44578

After bio_advance(), we are still in the same page, so start_byte is the
same. Then, we check (total_out > start_byte && current_buf_start < start_byte),
which is true! So, we adjust the values again:

    buf_offset = start_byte - buf_start = 2287
    working_bytes = total_out - start_byte = 1809
    current_buf_start = buf_start + buf_offset = 45056

But note that working_bytes was already zero before this, so we should
have stopped copying.

Fixes: 974b1adc ("btrfs: use bio iterators for the decompression handlers")
Reported-by: NPat Erley <pat-lkml@erley.org>
Reviewed-by: NChris Mason <clm@fb.com>
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Tested-by: NLiu Bo <bo.li.liu@oracle.com>

There are loads of functions in btrfs that accept a root parameter
but only use it to obtain an fs_info pointer.  Let's convert those to
just accept an fs_info pointer directly.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

In routines where someptr->fs_info is referenced multiple times, we
introduce a convenience variable.  This makes the code considerably
more readable.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We track the node sizes per-root, but they never vary from the values
in the superblock.  This patch messes with the 80-column style a bit,
but subsequent patches to factor out root->fs_info into a convenience
variable fix it up again.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Use the bvec offset and len members to prepare for multipage bvecs.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Instead of using bi_vcnt to calculate it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Pass the full bio to the decompression routines and use bio iterators
to iterate over the data in the bio.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

csum member of struct btrfs_super_block has array type of u8. It makes
sense that function btrfs_csum_final should be also declared to accept
u8 *. I changed the declaration of method void btrfs_csum_final(u32 crc,
char *result); to void btrfs_csum_final(u32 crc, u8 *result);
Signed-off-by: NDomagoj Tršan <domagoj.trsan@gmail.com>
[ changed cast to u8 at several call sites ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Fixes: 4246a0b6 ("block: add a bi_error field to struct bio")
Signed-off-by: NJunjie Mao <junjie.mao@enight.me>
Acked-by: NDavid Sterba <dsterba@suse.cz>
Cc: stable@vger.kernel.org # 4.3+
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For many printks, we want to know which file system issued the message.

This patch converts most pr_* calls to use the btrfs_* versions instead.
In some cases, this means adding plumbing to allow call sites access to
an fs_info pointer.

fs/btrfs/check-integrity.c is left alone for another day.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This patch converts printk(KERN_* style messages to use the pr_* versions.

One side effect is that anything that was KERN_DEBUG is now automatically
a dynamic debug message.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This is similar to btrfs_submit_compressed_read(), if we fail after
bio is allocated, then we can use bio_endio() and errors are saved
 in bio->bi_error.  But please note that we don't return errors to
its caller because the caller assumes it won't call endio to cleanup
on error.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The bio REQ_OP and bi_rw rq_flag_bits are now always setup, so there is
no need to pass around the rq_flag_bits bits too. btrfs users should
should access the bio insead.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

This should be the easier cases to convert btrfs to
bio_set_op_attrs/bio_op.
They are mostly just cut and replace type of changes.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Be verbose if there are no workspaces at all, ie. the module init time
preallocation failed.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

With just one preallocated workspace we can guarantee forward progress
even if there's no memory available for new workspaces. The cost is more
waiting but we also get rid of several error paths.

On average, there will be several idle workspaces, so the waiting
penalty won't be so bad.

In the worst case, all cpus will compete for one workspace until there's
some memory. Attempts to allocate a new one are done each time the
waiters are woken up.
Signed-off-by: NDavid Sterba <dsterba@suse.com>