Add a function to convert from the generic videomode to a fb_videomode.
Signed-off-by: NSteffen Trumtrar <s.trumtrar@pengutronix.de>
Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de>
Acked-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: NAfzal Mohammed <Afzal@ti.com>
Tested-by: NRob Clark <robclark@gmail.com>
Tested-by: NLeela Krishna Amudala <leelakrishna.a@gmail.com>

This adds support for reading display timings from DT into a struct
display_timings. The of_display_timing implementation supports multiple
subnodes. All children are read into an array, that can be queried.

If no native mode is specified, the first subnode will be used.

For cases where the graphics driver knows there can be only one
mode description or where the driver only supports one mode, a helper
function of_get_videomode is added, that gets a struct videomode from DT.
Signed-off-by: NSteffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Acked-by: NStephen Warren <swarren@nvidia.com>
Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de>
Acked-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: NAfzal Mohammed <Afzal@ti.com>
Tested-by: NRob Clark <robclark@gmail.com>
Tested-by: NLeela Krishna Amudala <leelakrishna.a@gmail.com>

Add display_timing structure and the according helper functions. This allows
the description of a display via its supported timing parameters.

Also, add helper functions to convert from display timings to a generic videomode
structure.

The struct display_timing specifies all needed parameters to describe the signal
properties of a display in one mode. This includes
    - ranges for signals that may have min-, max- and typical values
    - single integers for signals that can be on, off or are ignored
    - booleans for signals that are either on or off

As a display may support multiple modes like this, a struct display_timings is
added, that holds all given struct display_timing pointers and declares the
native mode of the display.

Although a display may state that a signal can be in a range, it is driven with
fixed values that indicate a videomode. Therefore graphic drivers don't need all
the information of struct display_timing, but would generate a videomode from
the given set of supported signal timings and work with that.

The video subsystems all define their own structs that describe a mode and work
with that (e.g. fb_videomode or drm_display_mode). To slowly replace all those
various structures and allow code reuse across those subsystems, add struct
videomode as a generic description.

This patch only includes the most basic fields in struct videomode. All missing
fields that are needed to have a really generic video mode description can be
added at a later stage.
Signed-off-by: NSteffen Trumtrar <s.trumtrar@pengutronix.de>
Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de>
Acked-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: NAfzal Mohammed <Afzal@ti.com>
Tested-by: NRob Clark <robclark@gmail.com>
Tested-by: NLeela Krishna Amudala <leelakrishna.a@gmail.com>

The struct display_timing is specific to the via subsystem. The naming leads to
collisions with the new struct display_timing, which is supposed to be a shared
struct between different subsystems.
To clean this up, prepend the existing struct with the subsystem it is specific
to.
Signed-off-by: NSteffen Trumtrar <s.trumtrar@pengutronix.de>

This was leading to a strange behaviour when using the fbcon driver on
top of this one: the letters were in the right order, but each letter
had a vertical symmetry.

This was because the addressing was right for the byte, but the
addressing of each individual bit was inverted.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Cc: Brian Lilly <brian@crystalfontz.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Thomas Petazzoni <thomas@free-electrons.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The VDCTRL4 register does not provide the MXS SET/CLR/TOGGLE feature.
The write in mxsfb_disable_controller() sets the data_cnt for the LCD
DMA to 0 which obviously means the max. count for the LCD DMA and
leads to overwriting arbitrary memory when the display is unblanked.
Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de>
Acked-by: NJuergen Beisert <jbe@pengutronix.de>
Tested-by: NLauri Hintsala <lauri.hintsala@bluegiga.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the checkpatch error and warning as below:

  WARNING: space prohibited between function name and open parenthesis '('
  ERROR: trailing statements should be on next line

Also, long comments are fixed for the preferred style and unnecessary
lines are removed.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Changing backlight intensity on an Akita (Sharp Zaurus C-1000) triggers
WARN_ON message:

  WARNING: at drivers/gpio/gpiolib.c:1672 __gpio_set_value+0x38/0xa4()
  Modules linked in:
  Backtrace:
    corgi_bl_set_intensity+0x0/0x74
    corgi_bl_update_status+0x0/0x64
    corgi_lcd_probe+0x0/0x258
    spi_drv_probe+0x0/0x24
    driver_probe_device+0x0/0x208
    __driver_attach+0x0/0x94
    bus_for_each_dev+0x0/0x90
    driver_attach+0x0/0x28
    bus_add_driver+0x0/0x22c
    driver_register+0x0/0x134
    spi_register_driver+0x0/0x60
    corgi_lcd_driver_init+0x0/0x1c
    do_one_initcall+0x0/0x174
    kernel_init+0x0/0x2a8

Akita machines have backlight controls hooked to a gpio expander chip,
max7310 using i2c transfers which can sleep.  In this case,
pca953x_gpio_set_value() can be called to control gpio, and
pca953x_setup_gpio() sets can_sleep flag.  Therefore,
gpio_set_value_cansleep() should be used in order to avoid WARN_ON on
akita machines.

Akita is the only exception in this case since other users of corgi_lcd
access backlight gpio controls through a different gpio expander which
does not set the can_sleep flag.
Signed-off-by: NMarko Katic <dromede@gmail.com>
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

GPIOF_DIR_OUT and GPIOF_DIR_IN are defined as below:

   GPIOF_DIR_OUT   (0 << 0)
   GPIOF_DIR_IN    (1 << 0)

So, when !pdata->reset_inverted is 1, the gpio pin can be set as
input, instead of output.

To prevent this problem, GPIOF_INIT flag should be used when using
devm_gpio_request_one().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Previously, when ops functions cannot be called, lcd_show_contrast() and
lcd_store_contrast() returned 0, instead of ENXIO.

Thus, in this case, a local variable 'rc' for return value should be
initialized as ENXIO, after kstrtoul() is called.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove an unnecessary line continuation in pm860x_backlight_probe().
Also, a checkpatch warning is fixed as below:

  WARNING: Avoid unnecessary line continuations

[akpm@linux-foundation.org: remove newline]
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

TWL_MODULE_PWM is defined as:

  #define TWL_MODULE_PWM		TWL4030_MODULE_PWM0

Use the common module ID define here which will facilitate the upcoming
twl-core cleanup.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This function finds the struct backlight_device for a given device tree
node.  A dummy function is provided so that it safely compiles out if OF
support is disabled.

[akpm@linux-foundation.org: Don't use IS_ENABLED(CONFIG_OF)]
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Reviewed-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We don't need the sysfs file to be world writable or group writable.
This file is write-only, change it to S_IWUSR (0200).
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Acked-by: N"G.Shark Jeong" <gshark.jeong@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

devm_kfree() allocates memory that is released when a driver detaches.
Thus, there is no reason to explicitly call devm_kfree in probe or remove
functions.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

devm_kfree() allocates memory that is released when a driver detaches.
Thus, there is no reason to explicitly call devm_kfree() in probe or remove
functions.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove unnecessary cast of void pointer for platform data in probe
function.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add 'const' to static array that was missing it in its definition.  Also,
'const' is added to ili9320_write_regs(), because it is called by
vgg2432a4 driver.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add 'const' to static array that was missing it in its definition.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add 'const' to static array that was missing it in its definition.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NMarek Vasut <marex@denx.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add 'const' to static array that was missing it in its definition.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Ashish Jangam <ashish.jangam@kpitcummins.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The mutex for accessing lp855x registers is used in case of the user-space
interaction.  When the brightness is changed via sysfs, the mutex is
required.  But the backlight class device already provides it.  Thus, the
lp855x mutex is unnecessary.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The LP855x family devices support the PWM input for the backlight control.
 Period of the PWM is configurable in the platform side.  Platform
specific functions are unnecessary anymore because generic PWM functions
are used inside the driver.

(PWM input mode)
To set the brightness, new lp855x_pwm_ctrl() is used.
If a PWM device is not allocated, devm_pwm_get() is called.
The PWM consumer name is from the chip name such as 'lp8550' and 'lp8556'.
To get the brightness value, no additional handling is required.
Just the value of 'props.brightness' is returned.

If the PWM driver is not ready while initializing the LP855x driver, it's
OK.  The PWM device can be retrieved later, when the brightness value is
changed.

Documentation is updated with an example.

[akpm@linux-foundation.org: coding-style simplification, per Thierry]
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

By using devm_gpio_request_one it is possible to set the direction and
initial value in one shot.  Thus, using devm_gpio_request_one can make the
code simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

By using devm_gpio_request_one it is possible to set the direction
and initial value in one shot. Thus, using devm_gpio_request_one
can make the code simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Acked-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes the checkpatch warning as below:

  WARNING: please, no space before tabs
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes the checkpatch error and warning as below:

  ERROR: spaces required around that '?' (ctx:VxW)
  ERROR: space required after that ',' (ctx:VxV)

Also, unnecessary lines are removed.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes the checkpatch warning as below:

  WARNING: please, no space before tabs
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes the checkpatch error as below:

  ERROR: spaces prohibited around that ':' (ctx:WxW)
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes the checkpatch warning as below:

  WARNING: please, no spaces at the start of a line

Also, long comments are fixed for the preferred style.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes the checkpatch warning as below:

  ERROR: inline keyword should sit between storage class and type
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes the checkpatch warning as below:

  WARNING: static const char * array should probably be static const char * const
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes the checkpatch warning as below:

  WARNING: please, no space before tabs

Also, unnecessary line is removed.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes the checkpatch error and warning as below:

  ERROR: return is not a function, parentheses are not required

Also, long comments are fixed for the preferred style.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes the checkpatch error and warning as below:

  WARNING: please, no space before tabs
  WARNING: please, no spaces at the start of a line
  WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
  WARNING: braces {} are not necessary for single statement blocks
  ERROR: code indent should use tabs where possible
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes the checkpatch error and warning as below:

  WARNING: please, no space before tabs
  WARNING: please, no spaces at the start of a line
  ERROR: do not initialise statics to 0 or NULL
  ERROR: code indent should use tabs where possible
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes the checkpatch warning as below:

  WARNING: space prohibited between function name and open parenthesis '('
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes the checkpatch warning as below:

  WARNING: please, no space before tabs
  WARNING: quoted string split across lines
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes the checkpatch error and warning as below:

  WARNING: please, no space before tabs
  WARNING: quoted string split across lines
  ERROR: space required before the open parenthesis '('
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>