When a Raw Ethernet QP is created, we actually create a few objects.
One of these objects is a TIR. Currently, a TIR could hash (and spread
the traffic) by IP or port only. Adding a hashing by IPSec SPI to TIR
creation with the required UAPI bit.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Users should be able to query for IPSec support. Adding a few
capabilities bits as part of the driver specific part in
alloc_ucontext:
MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_REQ_METADATA
	Payload's header is returned with metadata representing the
	IPSec decryption state.
MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_RX
	Support ESP_AES_GCM in ingress path.
MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_TX
	Support ESP_AES_GCM in egress path.
MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_SPI_RSS_ONLY
	Hardware doesn't support matching SPI in flow steering rules
	but just hashing and spreading the traffic accordingly.
Signed-off-by: NAviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This commit introduces support for the esp_aes_gcm flow
specification for the Innova device. To that end we add
support for egress steering and some validations that an
IPsec rule is indeed valid.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NAviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Simple wrapper to understand if we are dealing with IPsec flow.
Signed-off-by: NAviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Adding implementation in mlx5 driver to modify action_xfrm object. This
merely call the accel layer. Currently a user can modify only the
ESN parameters.
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NAviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Adding implementation in mlx5 driver to create and destroy action_xfrm
object. This merely call the accel layer.

A user may pass MLX5_IB_XFRM_FLAGS_REQUIRE_METADATA flag which states
that [s]he expects a metadata header to be added to the payload. This
header represents information regarding the transformation's state.
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NAviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Adding a new ESP steering match filter that could match against
spi and seq used in IPSec protocol.
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

flow_actions of ESP type could be modified during runtime. This could be
common for example when ESN should be changed. Adding a new
UVERBS_FLOW_ACTION_ESP_MODIFY method for changing ESP parameters of an
existing ESP flow_action.
The new method uses the UVERBS_FLOW_ACTION_ESP_CREATE attributes, but
adds a new IB_FLOW_ACTION_ESP_FLAGS_MOD_ESP_ATTRS which means ESP_ATTRS
should be changed.
In addition, we add a new FLOW_ACTION_ESP_REPLAY_NONE replay type that
could be used when one wants to disable a replay protection over a
specific flow_action.
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The egress flag indicates that this flow steering rule is for egress
traffic. The scope of an egress rule is port-wide, meaning all packets
originated from that port, which match the steering rule specification
will be effected by this steering rule's action.
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NBoris Pismenny <borisp@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Binding a flow_action to flow steering rule requires using a new
specification. Therefore, adding such an IB_FLOW_SPEC_ACTION_HANDLE flow
specification.

Flow steering rules could use flow_action(s) and as of that we need to
avoid deleting flow_action(s) as long as they're being used.
Moreover, when the attached rules are deleted, action_handle reference
count should be decremented. Introducing a new mechanism of flow
resources to keep track on the attached action_handle(s). Later on, this
mechanism should be extended to other attached flow steering resources
like flow counters.
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

A verbs application may receive and transmits packets using a data
path pipeline. Sometimes, the first stage in the receive pipeline or
the last stage in the transmit pipeline involves transforming a
packet, either in order to make it easier for later stages to process
it or to prepare it for transmission over the wire. Such transformation
could be stripping/encapsulating the packet (i.e. vxlan),
decrypting/encrypting it (i.e. ipsec), altering headers, doing some
complex FPGA changes, etc.

Some hardware could do such transformations without software data path
intervention at all. The flow steering API supports steering a
packet (either to a QP or dropping it) and some simple packet
immutable actions (i.e. tagging a packet). Complex actions, that may
change the packet, could bloat the flow steering API extensively.
Sometimes the same action should be applied to several flows.
In this case, it's easier to bind several flows to the same action and
modify it than change all matching flows.

Introducing a new flow_action object that abstracts any packet
transformation (out of a standard and well defined set of actions).
This flow_action object could be tied to a flow steering rule via a
new specification.

Currently, we support esp flow_action, which encrypts or decrypts a
packet according to the given parameters. However, we present a
flexible schema that could be used to other transformation actions tied
to flow rules.
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The current implementation of kern_spec_to_ib_spec_filter, which takes
a uAPI based flow steering specification and creates the respective kernel
API flow steering structure, gets a ib_uverbs_flow_spec structure.
The new flow_action uAPI gets a match mask and filter from user-space
which aren't encoded in the flow steering's ib_uverbs_flow_spec structure.
Exporting the logic out of kern_spec_to_ib_spec_filter to get user-space
blobs rather than ib_uverbs_flow_spec structure.
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

ConnectX3 doesn't support egress flow steering. Return an EOPNOTSUPP
error when such a flow is being created.
Signed-off-by: NBoris Pismenny <borisp@mellanox.com>
Reviewed-by: NAviad Yehezkel <aviadye@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Methods sometimes need to get one attribute out of a group of
pre-defined attributes. This is an enum-like behavior. Since
this is a common requirement, we add a new ENUM attribute to the
generic uverbs ioctl() layer. This attribute is embedded in methods,
like any other attributes we currently have. ENUM attributes point to
an array of standard UVERBS_ATTR_PTR_IN. The user-space encodes the
enum's attribute id in the id field and the internal PTR_IN attr id in
the enum_data.elem_id field. This ENUM attribute could be shared by
several attributes and it can get UVERBS_ATTR_SPEC_F_MANDATORY flag,
stating this attribute must be supported by the kernel, like any other
attribute.
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

In order to have a custom parsing tree, a provider driver needs to
assign its parsing tree to ib_device specs_tree field. Otherwise, the
uverbs client assigns a common default parsing tree for it.
In downstream patches, the mlx5_ib driver gains a custom parsing tree,
which contains both the common objects and a new flags field for the
UVERBS_FLOW_ACTION_ESP_CREATE command.
This patch makes mlx5_ib assign its own tree to specs_root, which
later on will be extended.
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Now that ib_gid_attr contains device, port and index, simplify the
provider APIs add_gid() and del_gid() to use device, port and index
fields from the ib_gid_attr attributes structure.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Now that IB core GID cache ensures that all RoCE entries have an
associated netdev remove null checks from the provider drivers for
clarity.
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Now that the IB core GID cache ensures that a zero GID doesn't exist in
the GID table remove zero GID checks from the provider drivers for
clarity.
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Code is refactored to prepare separate functions for RoCE which can do more
complex operations related to reference counting, while still
maintainining code readability. This includes
(a) Simplification to not perform netdevice checks and modifications
for IB link layer.
(b) Do not add RoCE GID entry which has NULL netdevice; instead return
an error.
(c) If GID addition fails at provider level add_gid(), do not add the
entry in the cache and keep the entry marked as INVALID.
(d) Simplify and reuse the ib_cache_gid_add()/del() routines so that they
can be used even for modifying default GIDs. This avoid some code
duplication in modifying default GIDs.
(e) find_gid() routine refers to the data entry flags to qualify a GID
as valid or invalid GID rather than depending on attributes and zeroness
of the GID content.
(f) gid_table_reserve_default() sets the GID default attribute at
beginning while setting up the GID table. There is no need to use
default_gid flag in low level functions such as write_gid(), add_gid(),
del_gid(), as they never need to update the DEFAULT property of the GID
entry while during GID table update.

As as result of this refactor, reserved GID 0:0:0:0:0:0:0:0 is no longer
searchable as described below.

A unicast GID entry of 0:0:0:0:0:0:0:0 is Reserved GID as per the IB
spec version 1.3 section 4.1.1, point (6) whose snippet is below.

"The unicast GID address 0:0:0:0:0:0:0:0 is reserved - referred to as
the Reserved GID. It shall never be assigned to any endport. It shall
not be used as a destination address or in a global routing header
(GRH)."

GID table cache now only stores valid GID entries. Before this patch,
Reserved GID 0:0:0:0:0:0:0:0 was searchable in the GID table using
ib_find_cached_gid_by_port() and other similar find routines.

Zero GID is no longer searchable as it shall not to be present in GRH or
path recored entry as described in IB spec version 1.3 section 4.1.1,
point (6), section 12.7.10 and section 12.7.20.

ib_cache_update() is simplified to check link layer once, use unified
locking scheme for all link layers, removed temporary gid table
allocation/free logic.

Additionally,
(a) Expand ib_gid_attr to store port and index so that GID query
routines can get port and index information from the attribute structure.
(b) Expand ib_gid_attr to store device as well so that in future code when
GID reference counting is done, device is used to reach back to the GID
table entry.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Currently following inconsistencies exist.
1. ib_query_gid() returns GID from the software cache for a RoCE port
and returns GID from the HCA for an IB port.
This is incorrect because software GID cache is maintained regardless
of HCA port type.

2. GID is queries from the HCA via ib_query_gid and updated in the
software cache for IB link layer. Both of them might not be in sync.

ULPs such as SRP initiator, SRP target, IPoIB driver have historically
used ib_query_gid() API to query the GID. However CM used cached version
during CM processing, When software cache was introduced, this
inconsitency remained.

In order to simplify, improve readability and avoid link layer
specific above inconsistencies, this patch brings following changes.

1. ib_query_gid() always refers to the cache layer regardless of link
layer.

2. cache module who reads the GID entry from HCA and builds the cache,
directly invokes the HCA provider verb's query_gid() callback function.

3. ib_query_port() is being called in early stage where GID cache is not
yet build while reading port immutable property. Therefore it needs to
read the default GID from the HCA for IB link layer to publish the
subnet prefix.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

ib_query_gid() fetches the GID from the software cache maintained in
ib_core for RoCE ports.

Therefore, simplify the provider drivers for RoCE to treat query_gid()
callback as never called for RoCE, and only require non-RoCE devices to
implement it.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

query_gid() should return right GID value for iWarp and IB link layers.
It is a no-op for RoCE link layer.  Update the documentation to reflect
this.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Check to make sure that ctx->cm_id->device is set before we use it.
Otherwise userspace can trigger a NULL dereference by doing
RDMA_USER_CM_CMD_SET_OPTION on an ID that is not bound to a device.

Cc: <stable@vger.kernel.org>
Reported-by: <syzbot+a67bc93e14682d92fc2f@syzkaller.appspotmail.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

qedr driver's add_gid() and del_gid() callbacks are doing simple
checks which are already done by the ib core before invoking these
callback routines.

Therefore, code is simplified to skip implementing add_gid() and
del_gid() callback functions.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Support for resource profile 1 is currenlty deprecated due to
a pre-production errata. Remove this workaround as its no longer
needed.
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This structure is pushed down the ex and the non-ex path, so it needs to be
aligned to 8 bytes to go through ex without implicit padding.

Old user space will provide 4 bytes of resp on !ex and 8 bytes on ex, so
take the approach of just copying the minimum length.

New user space will consistently provide 8 bytes in both cases.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Check on return values and goto label mbx_err are unnecessary.

Addresses-Coverity-ID: 1271151 ("Identical code for different branches")
Addresses-Coverity-ID: 1268788 ("Identical code for different branches")
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This structure is not needed since the introduction of commit
'c4268778 ("IB/ipoib: Scatter-Gather support in connected mode")'
Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NZhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

c4iw_ep_common structure holds the mapped addresses, so while printing
them, use appropriate pointers.

Fixes: bab572f1 ("iw_cxgb4: Guard against null cm_id in dump_ep/qp")
Signed-off-by: NPotnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

rdma_cm_state enum is internal to rdma_cm kernel module.
It is not required to expose state enums to ULP modules.
So lets keep its scope limited to rdma_cm module in cma_priv.h file.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Make dst_entry pointer as const struct dst_entry* to improve code
readablity to make sure that dst structure fields are not modified by
various functions which are using it.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This is already used in many places, get the rest of them too, only
to make the code a bit clearer & simpler.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Export the net device name and index to easily find connection
between IB devices and relevant net devices.

We also updated the comment regarding the devices without FW.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

In mcast recv process, the function skb_clone is used. In fact,
the refcount can be increased to replace cloning a new skb since
the original skb will not be modified before it is freed.

This can make the performance better and save the memory.

CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NZhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Trivial fix to spelling mistake in DP_ERR message text
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NShamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Since the rdma_port_space enum is being passed between user and kernel for
user cm_id setup, we need it in a UAPI header.  So add it to
rdma_user_cm.h.

This also fixes the cm_id restrack changes which pass up the port space
value via the RDMA_NLDEV_ATTR_RES_PS attribute.

Fixes: 00313983 ("RDMA/nldev: provide detailed CM_ID information")
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This is no longer supported, so remove it.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

IB core maintains the GID cache entries for the GID table.
This cache table has to be maintained regardless of HCA's
support of GID table.
For IB and iWarp ports, cache is created by querying the HCA.
For RoCE cache is created based on netdev events.

Therefore just refer to the RoCE port property of the {device, port} to
decide whether to build cache by querying HCA or from netdev events.
There is no need to check if HCA support GID table or not.

ib_cache_update() referred to RoCE attribute before validating
port. Though in all current callers port is valid, it is incorrect
to query RoCE port property before validating the port. Therefore,
rdma_protocol_roce() check is done after rdma_is_port_valid() verifies
that port is valid.

Fixes: 115b68aa ("IB/ocrdma: Removed GID add/del null routines")
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Even though API is only used by IPoIB driver, its incorrect to refer
RoCE GID table property to search for GID.

Look for only IB link layer to search for the GID.

Fixes: dbb12562 ("IB/{core, ipoib}: Simplify ib_find_gid to search only for IB link layer")
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

ib_find_gid_by_filter() searches GID with filter only for RoCE link
layer regardless of HCA's support for GID table.
Therefore, right way to lookup is compare RoCE port property and not
the GID table property.

Fixes: 99b27e3b ("IB/cache: Add ib_find_gid_by_filter cache API")
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>