This patch helps with Sukadev's vendor event tree where such events can happen.

>From Andi Kleen:
 Any event including a .c/.o/.bpf currently triggers BPF compilation or loading
 and then an error. This can happen for some Intel vendor events, which cannot
 be used.

This patch fixes this problem by forbidding BPF file patch containing '{', '}'
and ',', make sure flex consumes the leading '{', instead of matching it using
a BPF file path.

Tested result:

  $ perf stat -e '{unc_p_clockticks,unc_p_power_state_occupancy.cores_c0}' -a -I 1000
  invalid or unsupported event: '{unc_p_clockticks,unc_p_power_state_occupancy.cores_c0}'
  Run 'perf list' for a list of valid events
  (as expected, interperted as event)

  $ perf stat -e 'aaa.c' -a -I 1000
  ERROR: problems with path aaa.c: No such file or directory
  (as expected, interpreted as BPF source)

  $ perf stat -e 'aaa.ccc' -a -I 1000
  invalid or unsupported event: 'aaa.ccc'
  (as expected, interpreted as event)

  $ perf stat -e '{aaa.c}' -a -I 1000
  ERROR: problems with path aaa.c: No such file or directory
  event syntax error: '{aaa.c}'
  <SKIP>
  (as expected, interpreted as BPF source)

  $ perf stat -e '{cycles,aaa.c}' -a -I 1000
  ERROR: problems with path aaa.c: No such file or directory
  event syntax error: '{cycles,aaa.c}'
  (as expected, interpreted as BPF source)
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Reported-by: NAndi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1475900185-37967-1-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Sukadev reported segfault on releasing perf env's numa data.  It's due
to nr_numa_nodes being set no matter if the numa data gets parsed
properly. The perf_env__exit crash the on releasing non existed data.

Setting nr_numa_nodes only when data are parsed out properly.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Reported-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dt9c0zgkt4hybn2cr4xiawta@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Markus reported that 'perf top --hierarchy' cannot scroll down after
refresh.  This was because the number of entries are not updated when
hierarchy is enabled.

Unlike normal report view, hierarchy mode needs to keep its own entry
count since it can have non-leaf entries which can expand/collapse.
Reported-and-Tested-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: f5b763fe ("perf hists browser: Count number of hierarchy entries")
Link: http://lkml.kernel.org/r/20161007050412.3000-1-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo-20161005' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

- Intel PT timestamp fixes (Adrian Hunter)

- Fix Intel JSON fixed counter conversions (Andi Kleen)

- Sync memcpy, cpufeatures and bpf headers with the kernel (Arnaldo Carvalho de Melo)

- Add some more tool tips (Donghyun Kim, Kim SeonYoung, Nambong Ha)

- Fix libtraceevent's kbuffer_read_at_offset() handling of offsets before or
  equal the first event (Namhyung Kim)

- Fix uretprobe probe placement on ppc64le (Ravi Bangoria)

- Support building C++ source files and add feature detection for g++,
  prep work for supporting a builtin clang/llvm, to remove the need for having
  that toolchain installed to automagically build BPF scriptlets that then
  gets uploaded to the kernel via sys_bpf() (Wang Nan)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Check if g++ is available. The result will be used by builtin clang and
LLVM support. Since LLVM requires C++11, this feature detector checks
std::move().
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1474874832-134786-3-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add new rule to compile .cpp file to .o use g++. C++ support is required
for built-in clang and LLVM support.

Linker side support will be introduced by following commits.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1474874832-134786-2-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add two tips that describe --list option of config sub-command and
explain how to choose particular config file location.
Signed-off-by: NNambong Ha <over3025@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <taeung@kosslab.kr>
Link: http://lkml.kernel.org/r/1475191562-3240-1-git-send-email-over3025@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Signed-off-by: NDonghyun Kim <dongdong9335@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <taeung@kosslab.kr>
Link: http://lkml.kernel.org/r/1475187357-21882-1-git-send-email-dongdong9335@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

There is a existing tip as below.

    If you have debuginfo enabled, try: perf report -s sym,srcline

However this tip only describe a condition to use --sort sym,scrline
options.  So there is lack of explanation in the tip. I think that it
would be better to add a tip that exactly explains the feature of --sort
srcline.
Signed-off-by: NSeonyoung Kim <adamas0414@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <taeung@kosslab.kr>
Link: http://lkml.kernel.org/r/1475194602-5596-1-git-send-email-adamas0414@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Commit 747ea55e ("bpf: fix bpf_skb_in_cgroup helper naming") renames
BPF_FUNC_skb_in_cgroup to bpf_skb_under_cgroup, triggering this warning
while building perf:

  Warning: tools/include/uapi/linux/bpf.h differs from kernel

Update the copy to ack that, no changes needed, as
BPF_FUNC_skb_in_cgroup isn't used so far.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-x67d2gq8ct6ko12ex14q8bbx@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Due to ffb173e6 ("x86/mce: Drop X86_FEATURE_MCE_RECOVERY and the
related model string test"), no changes needed in any other place as no
tool uses X86_FEATURE_MCE_RECOVERY.

Silences this detected drift when building tools/perf:

      Warning: tools/arch/x86/include/asm/cpufeatures.h differs from kernel

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-f3sfimg58t3cycbbl8f5cwxf@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Commit 9a6fb28a ("x86/mce: Improve memcpy_mcsafe()") renames
memcpy_mcsafe() to memcpy_mcsafe_unrolled(), making
tools/arch/x86/lib/memcpy_64.S drift from the its kernel counterpart,
triggering this warning in the perf build:

  Warning: tools/arch/x86/lib/memcpy_64.S differs from kernel

Sync that copy to acknowledge that, no changes to 'perf bench' are
needed, as this function is not used there.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xfwc1raw8obyrctxerwt1bbb@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Intel fixed counters are special cases in the JSON conversion process
because their decoding differs between perf and the event files.  Add
some missing entries in the conversion table.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1475696832-9188-4-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When it's called with an offset less than or equal to the first event,
it'll return a garbage value since the data is not initialized.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161001101700.29146-1-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The MTC packet provides a 8-bit slice of CTC which is related to TSC by
the TMA packet, however the TMA packet only provides the lower 16 bits
of CTC.  If mtc_shift > 8 then some of the MTC bits are not in the CTC
provided by the TMA packet. Fix-up the last_mtc calculated from the TMA
packet by copying the missing bits from the current MTC assuming the
least difference between the two, and that the current MTC comes after
last_mtc.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v4.3+
Link: http://lkml.kernel.org/r/1475062896-22274-2-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In cycle-accurate mode, timestamps can be calculated from CYC packets.
The decoder also estimates timestamps based on the number of
instructions since the last timestamp. For that to work in
cycle-accurate mode, the instruction count needs to be reset to zero
when a timestamp is calculated from a CYC packet, but that wasn't
happening, so fix it.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v4.3+
Link: http://lkml.kernel.org/r/1475062896-22274-1-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Perf uretprobe probes on GEP(Global Entry Point) which fails to record
all function calls via LEP(Local Entry Point). Fix that by probing on LEP.

Objdump:

  00000000100005f0 <doit>:
      100005f0:   02 10 40 3c     lis     r2,4098
      100005f4:   00 7f 42 38     addi    r2,r2,32512
      100005f8:   a6 02 08 7c     mflr    r0
      100005fc:   10 00 01 f8     std     r0,16(r1)
      10000600:   f8 ff e1 fb     std     r31,-8(r1)

Before applying patch:

  $ cat /sys/kernel/debug/tracing/uprobe_events
    r:probe_uprobe_test/doit /home/ravi/uprobe_test:0x00000000000005f0

After applying patch:

  $ cat /sys/kernel/debug/tracing/uprobe_events
    r:probe_uprobe_test/doit /home/ravi/uprobe_test:0x00000000000005f8

This is not the case with kretprobes because the kernel itself finds LEP
and probes on it.
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1475576865-6562-1-git-send-email-ravi.bangoria@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo-20161003' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/core improvements and fixes:

- Allow vendors to provide JSON files describing PMU events, that then
  get parsed to generate C tables that are linked against perf, allowing
  the use of the names in their documentations, such as:

  # perf list l1d

  List of pre-defined events (to be used in -e):

  Cache:
    l1d.replacement
         [L1D data line replacements]
    l1d_pend_miss.fb_full
         [Cycles a demand request was blocked due to Fill Buffers inavailability]
    l1d_pend_miss.pending
         [L1D miss oustandings duration in cycles]
    l1d_pend_miss.pending_cycles
         [Cycles with L1D load Misses outstanding]
    l1d_pend_miss.pending_cycles_any
         [Cycles with L1D load Misses outstanding from any thread on physical core]
    l2_trans.l1d_wb
         [L1D writebacks that access L2 cache]

  Pipeline:
    cycle_activity.cycles_l1d_miss
         [Cycles while L1 cache miss demand load is outstanding]
    cycle_activity.cycles_l1d_pending
         [Cycles while L1 cache miss demand load is outstanding]
    cycle_activity.stalls_l1d_miss
         [Execution stalls while L1 cache miss demand load is outstanding]
    cycle_activity.stalls_l1d_pending
         [Execution stalls while L1 cache miss demand load is outstanding]

  The above example was done on a Broadwell based ThinkPad t450s after
  downloading and installing such JSON files which will be added to the
  tools/perf/pmu-events/ directory in a subsequent patchkit.

  Now one can use those names with -e/--event in all 'perf tools'.
  (Andi Kleen, Sukadev Bhattiprolu)

- Add a missing pointer dereference in 'perf probe' (Colin Ian King)

- Add support for building host programs to be used in generating files
  to be used in the build process, such as fixdep and jevents, fixing
  the usage of these features in a cross compilation setup (Jiri Olsa)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Pull CPU hotplug updates from Thomas Gleixner:
 "Yet another batch of cpu hotplug core updates and conversions:

   - Provide core infrastructure for multi instance drivers so the
     drivers do not have to keep custom lists.

   - Convert custom lists to the new infrastructure. The block-mq custom
     list conversion comes through the block tree and makes the diffstat
     tip over to more lines removed than added.

   - Handle unbalanced hotplug enable/disable calls more gracefully.

   - Remove the obsolete CPU_STARTING/DYING notifier support.

   - Convert another batch of notifier users.

   The relayfs changes which conflicted with the conversion have been
   shipped to me by Andrew.

   The remaining lot is targeted for 4.10 so that we finally can remove
   the rest of the notifiers"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
  cpufreq: Fix up conversion to hotplug state machine
  blk/mq: Reserve hotplug states for block multiqueue
  x86/apic/uv: Convert to hotplug state machine
  s390/mm/pfault: Convert to hotplug state machine
  mips/loongson/smp: Convert to hotplug state machine
  mips/octeon/smp: Convert to hotplug state machine
  fault-injection/cpu: Convert to hotplug state machine
  padata: Convert to hotplug state machine
  cpufreq: Convert to hotplug state machine
  ACPI/processor: Convert to hotplug state machine
  virtio scsi: Convert to hotplug state machine
  oprofile/timer: Convert to hotplug state machine
  block/softirq: Convert to hotplug state machine
  lib/irq_poll: Convert to hotplug state machine
  x86/microcode: Convert to hotplug state machine
  sh/SH-X3 SMP: Convert to hotplug state machine
  ia64/mca: Convert to hotplug state machine
  ARM/OMAP/wakeupgen: Convert to hotplug state machine
  ARM/shmobile: Convert to hotplug state machine
  arm64/FP/SIMD: Convert to hotplug state machine
  ...

Pull irq updates from Thomas Gleixner:
 "The irq departement proudly presents:

   - A rework of the core infrastructure to optimally spread interrupt
     for multiqueue devices. The first version was a bit naive and
     failed to take thread siblings and other details into account.
     Developed in cooperation with Christoph and Keith.

   - Proper delegation of softirqs to ksoftirqd, so if ksoftirqd is
     active then no further softirq processsing on interrupt return
     happens. Otherwise we try to delegate and still run another batch
     of network packets in the irq return path, which then tries to
     delegate to ksoftirqd .....

   - A proper machine parseable sysfs based alternative for
     /proc/interrupts.

   - ACPI support for the GICV3-ITS and ARM interrupt remapping

   - Two new irq chips from the ARM SoC zoo: STM32-EXTI and MVEBU-PIC

   - A new irq chip for the JCore (SuperH)

   - The usual pile of small fixlets in core and irqchip drivers"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
  softirq: Let ksoftirqd do its job
  genirq: Make function __irq_do_set_handler() static
  ARM/dts: Add EXTI controller node to stm32f429
  ARM/STM32: Select external interrupts controller
  drivers/irqchip: Add STM32 external interrupts support
  Documentation/dt-bindings: Document STM32 EXTI controller bindings
  irqchip/mips-gic: Use for_each_set_bit to iterate over local IRQs
  pci/msi: Retrieve affinity for a vector
  genirq/affinity: Remove old irq spread infrastructure
  genirq/msi: Switch to new irq spreading infrastructure
  genirq/affinity: Provide smarter irq spreading infrastructure
  genirq/msi: Add cpumask allocation to alloc_msi_entry
  genirq: Expose interrupt information through sysfs
  irqchip/gicv3-its: Use MADT ITS subtable to do PCI/MSI domain initialization
  irqchip/gicv3-its: Factor out PCI-MSI part that might be reused for ACPI
  irqchip/gicv3-its: Probe ITS in the ACPI way
  irqchip/gicv3-its: Refactor ITS DT init code to prepare for ACPI
  irqchip/gicv3-its: Cleanup for ITS domain initialization
  PCI/MSI: Setup MSI domain on a per-device basis using IORT ACPI table
  ACPI: Add new IORT functions to support MSI domain handling
  ...

Pull timer updates from Thomas Gleixner:
 "A rather smalish set of updates for timers and timekeeping:

   - Two core fixes to prevent potential undefinded behaviour about
     which gcc is complaining rightfully.

   - A fix to prevent stopping the tick on an (soon) offline CPU so it
     can complete the shutdown procedure.

   - Wait for clocks to stabilize before making decisions, so a not yet
     validated clock is not rejected.

   - The usual pile of fixes to the various clocksource drivers.

   - Core code typo and include fixlets"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping: Include the correct header for errno definitions
  clocksource/drivers/ti-32k: Prevent ftrace recursion
  clocksource/mips-gic-timer: Stop checking cpu_has_counter
  clocksource/mips-gic-timer: Print an error if IRQ setup fails
  tick/nohz: Prevent stopping the tick on an offline CPU
  clocksource/drivers/oxnas: Add OX820 compatible
  clocksource/drivers/timer-atmel-pit: Simplify IRQ handler
  clocksource/drivers/timer-atmel-pit: Remove uselesss WARN_ON_ONCE
  clocksource/drivers/timer-atmel-pit: Drop at91sam926x_pit_common_init
  clocksource/drivers/moxart: Replace panic by pr_err
  clocksource/drivers/moxart: Replace setup_irq by request_irq
  clocksource/drivers/moxart: Add Aspeed support
  clocksource/drivers/moxart: Use struct to hold state
  clocksource/drivers/moxart: Refactor enable/disable
  time: Avoid undefined behaviour in ktime_add_safe()
  time: Avoid undefined behaviour in timespec64_add_safe()
  timekeeping: Prints the amounts of time spent during suspend
  clocksource: Defer override invalidation unless clock is unstable
  hrtimer: Spelling fixes

Pull ARC updates from Vineet Gupta:

 - ARCv2 support for native 64-bit atomics using LLOCK/SCONDD
   instructions

 - Support for upcoming 3.0 release of HS38 cores

 - Dwarf unwindinder improvements:
   - enable unwinding of hand written assembler code using CFI
     pseudo-ops
   - switch to .eh_frame (as opposed to historic .debug_frame)
   - get rid of a bunch of adhoc band-aids in the process

 - Misc fixes:
   - perf supporting generic cache-references and cache-misses (Alexey)
   - default NODE_SHIFT (Noam Camus)
   - usage of KFLAG instruction to set IE (Yuriy)

 - Platforms:
   - Add "model" property across the DT (Alexey)
   - Enable MODULE_* in defconfigs

* tag 'arc-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: [plat*] enables MODULE*
  ARCv2: fix local_save_flags
  ARC: CONFIG_NODES_SHIFT fix default values
  ARCv2: intc: Use kflag if STATUS32.IE must be reset
  ARC: .exit.* sections can be discarded in .eh_frame regime
  ARC: dw2 unwind: enable cfi pseudo ops in string lib
  ARC: dw2 unwind: add infrastructure for adding cfi pseudo ops to asm
  ARC: entry: make ret_from_system_call local label
  ARC: dw2 unwind: don't force dwarf 2
  ARC: dw2 unwind: switch to .eh_frame based unwinding
  ARC: dw2 unwind: factor CIE specifics for .eh_frame/.debug_frame
  ARC: module: support R_ARC_32_PCREL relocation
  arc: perf: Enable generic "cache-references" and "cache-misses" events
  ARC: [plat-eznps] add missing atomic_fetch_xxx operations
  ARCv2: Implement atomic64 based on LLOCKD/SCONDD instructions
  ARCv2: Support dynamic peripheral address space in HS38 rel 3.0 cores
  ARCv2: identify HS38 rel 3.0 cores
  ARCv2: Add support for ZeBu Emulation platform for HS cores
  arc: Add "model" properly in device tree description of all boards

Pull m68k updates from Geert Uytterhoeven:
 - cleanups
 - defconfig updates
 - GPG fingerprint update

* tag 'm68k-for-v4.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Migrate exception table users off module.h and onto extable.h
  CREDITS: Update fingerprint for Geert Uytterhoeven
  m68k: Use IS_ENABLED() instead of checking for built-in or module
  m68k/defconfig: Update defconfigs for v4.8-rc1

Add support for the "frontend" extra MSR on Skylake in the JSON
conversion.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-19-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The JSON event lists use a different encoding for fixed counters than
perf for instructions and cycles (ref-cycles is ok)

This lead to some common events like inst_retired.any or
cpu_clk_unhalted.thread not counting, when specified with their JSON
name.

Special case these events in the jevents conversion process.  I prefer
to not touch the JSON files for this, as it's intended that standard
JSON files can be just dropped into the perf build without changes.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
[Fix minor compile error]
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-18-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Make alias matching the events parser case-insensitive. This is useful
with the JSON events. perf uses lower case events, but the CPU manuals
generally use upper case event names. The JSON files use lower case by
default too. But if we search case insensitively then users can
cut-n-paste the upper case event names.

So the following works:

% perf stat -e BR_INST_EXEC.TAKEN_INDIRECT_NEAR_CALL true

 Performance counter stats for 'true':

               305      BR_INST_EXEC.TAKEN_INDIRECT_NEAR_CALL

       0.000492799 seconds time elapsed
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-17-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This avoids the JSON PMU events parser having to know whether its
aliases are for perf stat or perf record.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-20-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-16-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add support to group the output of perf list by the Topic field in the
JSON file.

Example output:

% perf list
...
Cache:
  l1d.replacement
       [L1D data line replacements]
  l1d_pend_miss.pending
       [L1D miss oustandings duration in cycles]
  l1d_pend_miss.pending_cycles
       [Cycles with L1D load Misses outstanding]
  l2_l1d_wb_rqsts.all
       [Not rejected writebacks from L1D to L2 cache lines in any state]
  l2_l1d_wb_rqsts.hit_e
       [Not rejected writebacks from L1D to L2 cache lines in E state]
  l2_l1d_wb_rqsts.hit_m
       [Not rejected writebacks from L1D to L2 cache lines in M state]

...
Pipeline:
  arith.fpu_div
       [Divide operations executed]
  arith.fpu_div_active
       [Cycles when divider is busy executing divide operations]
  baclears.any
       [Counts the total number when the front end is resteered, mainly
       when the BPU cannot provide a correct prediction and this is
       corrected by other branch handling mechanisms at the front end]
  br_inst_exec.all_branches
       [Speculative and retired branches]
  br_inst_exec.all_conditional
       [Speculative and retired macro-conditional branches]
  br_inst_exec.all_direct_jmp
       [Speculative and retired macro-unconditional branches excluding
       calls and indirects]
  br_inst_exec.all_direct_near_call
       [Speculative and retired direct near calls]
  br_inst_exec.all_indirect_jump_non_call_ret
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-14-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Previously we were dropping the useful longer descriptions that some
events have in the event list completely. This patch makes them appear with
perf list.

Old perf list:

baclears:
  baclears.all
       [Counts the number of baclears]

vs new:

perf list -v:
...
baclears:
  baclears.all
       [The BACLEARS event counts the number of times the front end is
        resteered, mainly when the Branch Prediction Unit cannot provide
        a correct prediction and this is corrected by the Branch Address
        Calculator at the front end. The BACLEARS.ANY event counts the
        number of baclears for any type of branch]
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-13-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Implement support in jevents to parse long descriptions for events that
may have them in the JSON files. A follow on patch will make this long
description available to user through the 'perf list' command.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-11-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add a PERF_CPUID variable to override the CPUID of the current CPU
(within the current architecture). This is useful for testing, so that
all event lists can be tested on a single system.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-10-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add a --no-desc flag to 'perf list' to not print the event descriptions
that were earlier added for JSON events. This may be useful to get a
less crowded listing.

It's still default to print descriptions as that is the more useful
default for most users.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1473978296-20712-9-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Automatically adapt the now wider and word wrapped perf list output to
wider terminals. This requires querying the terminal before the auto
pager takes over, and exporting this information from the pager
subsystem.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-8-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add support to print alias descriptions in perf list, which are taken
from the generated event files.

The sorting code is changed to put the events with descriptions at the
end. The descriptions are printed as possibly multiple word wrapped
lines.

Example output:

% perf list
...
  arith.fpu_div
       [Divide operations executed]
  arith.fpu_div_active
       [Cycles when divider is busy executing divide operations]

Committer notes:

Further testing on a Broadwell machine (ThinkPad t450s), using these
files:

  $ find tools/perf/pmu-events/arch/x86/
  tools/perf/pmu-events/arch/x86/
  tools/perf/pmu-events/arch/x86/Broadwell
  tools/perf/pmu-events/arch/x86/Broadwell/Cache.json
  tools/perf/pmu-events/arch/x86/Broadwell/Other.json
  tools/perf/pmu-events/arch/x86/Broadwell/Frontend.json
  tools/perf/pmu-events/arch/x86/Broadwell/Virtual-Memory.json
  tools/perf/pmu-events/arch/x86/Broadwell/Pipeline.json
  tools/perf/pmu-events/arch/x86/Broadwell/Floating-point.json
  tools/perf/pmu-events/arch/x86/Broadwell/Memory.json
  tools/perf/pmu-events/arch/x86/mapfile.csv
  $

Taken from:

https://github.com/sukadev/linux/tree/json-code+data-v21/tools/perf/pmu-events/arch/x86/

to get this machinery to actually parse JSON files, generate
$(OUTPUT)pmu-events/pmu-events.c, compile it and link it with perf, that
will then use the table it contains, these files will be submitted right
after this patchkit.

  [acme@jouet linux]$ perf list page_walker

  List of pre-defined events (to be used in -e):

    page_walker_loads.dtlb_l1
         [Number of DTLB page walker hits in the L1+FB]
    page_walker_loads.dtlb_l2
         [Number of DTLB page walker hits in the L2]
    page_walker_loads.dtlb_l3
         [Number of DTLB page walker hits in the L3 + XSNP]
    page_walker_loads.dtlb_memory
         [Number of DTLB page walker hits in Memory]
    page_walker_loads.itlb_l1
         [Number of ITLB page walker hits in the L1+FB]
    page_walker_loads.itlb_l2
         [Number of ITLB page walker hits in the L2]
    page_walker_loads.itlb_l3
         [Number of ITLB page walker hits in the L3 + XSNP]

[acme@jouet linux]$
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-7-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To work with existing mapfiles, assume that the first line in
'mapfile.csv' is a header line and skip over it.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1473978296-20712-15-git-send-email-sukadev@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Pull x86 vdso updates from Ingo Molnar:
 "The main changes in this cycle centered around adding support for
  32-bit compatible C/R of the vDSO on 64-bit kernels, by Dmitry
  Safonov"

* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso: Use CONFIG_X86_X32_ABI to enable vdso prctl
  x86/vdso: Only define map_vdso_randomized() if CONFIG_X86_64
  x86/vdso: Only define prctl_map_vdso() if CONFIG_CHECKPOINT_RESTORE
  x86/signal: Add SA_{X32,IA32}_ABI sa_flags
  x86/ptrace: Down with test_thread_flag(TIF_IA32)
  x86/coredump: Use pr_reg size, rather that TIF_IA32 flag
  x86/arch_prctl/vdso: Add ARCH_MAP_VDSO_*
  x86/vdso: Replace calculate_addr in map_vdso() with addr
  x86/vdso: Unmap vdso blob on vvar mapping failure

Pull x86 timer updates from Ingo Molnar:
 "This tree includes a HPET overhead micro-optimization plus new TSC
  frequencies for newer Intel CPUs"

* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsc: Add additional Intel CPU models to the crystal quirk list
  x86/tsc: Use cpu id defines instead of hex constants
  x86/hpet: Reduce HPET counter read contention

Pull x86 platform changes from Ingo Molnar:
 "The main changes in this cycle were:

   - SGI UV updates (Andrew Banman)

   - Intel MID updates (Andy Shevchenko)

   - Initial Mellanox systems platform (Vadim Pasternak)"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/mellanox: Fix return value check in mlxplat_init()
  x86/platform/mellanox: Introduce support for Mellanox systems platform
  x86/platform/uv/BAU: Add UV4-specific functions
  x86/platform/uv/BAU: Fix payload queue setup on UV4 hardware
  x86/platform/uv/BAU: Disable software timeout on UV4 hardware
  x86/platform/uv/BAU: Populate ->uvhub_version with UV4 version information
  x86/platform/uv/BAU: Use generic function pointers
  x86/platform/uv/BAU: Add generic function pointers
  x86/platform/uv/BAU: Convert uv_physnodeaddr() use to uv_gpa_to_offset()
  x86/platform/uv/BAU: Clean up pq_init()
  x86/platform/uv/BAU: Clean up and update printks
  x86/platform/uv/BAU: Clean up vertical alignment
  x86/platform/intel-mid: Keep SRAM powered on at boot
  x86/platform/intel-mid: Add Intel Penwell to ID table
  x86/cpu: Rename Merrifield2 to Moorefield
  x86/platform/intel-mid: Implement power off sequence
  x86/platform/intel-mid: Enable SD card detection on Merrifield
  x86/platform/intel-mid: Enable WiFi on Intel Edison
  x86/platform/intel-mid: Run PWRMU command immediately

Pull x86 cleanups from Ingo Molnar:
 "Header file and a wrapper functions cleanup"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Migrate exception table users off module.h and onto extable.h
  x86: Clean up various simple wrapper functions