Signed-off-by: NDmitriy Taychenachev <dimichxp@gmail.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Move ifdef under function brackets. This fixes compile crach when IRQ priorities
are disabled.
Signed-off-by: NDarius Augulis <augulis.darius@gmail.com>

i.MX3x SoCs contain an Image Processing Unit, consisting of a Control
Module (CM), Display Interface (DI), Synchronous Display Controller (SDC),
Asynchronous Display Controller (ADC), Image Converter (IC), Post-Filter
(PF), Camera Sensor Interface (CSI), and an Image DMA Controller (IDMAC).
CM contains, among other blocks, an Interrupt Generator (IG) and a Clock
and Reset Control Unit (CRCU). This driver serves IDMAC and IG. They are
supported over dmaengine and irq-chip APIs respectively.

IDMAC is a specialised DMA controller, its DMA channels cannot be used for
general-purpose operations, even though it might be possible to configure
a memory-to-memory channel for memcpy operation. This driver will not work
with generic dmaengine clients, clients, wishing to use it must use
respective wrapper structures, they also must specify which channels they
require, as channels are hard-wired to specific IPU functions.
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

This patch removes the inclusion of mach/hardware.h from mach/irqs.h and
switches to more meaningful names for the irq related macros.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Drivers which are going to use it will have to select it and use
mxc_set_irq_fiq() to set FIQ mode for this interrupt.
Signed-off-by: NPaulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: NDarius Augulis <augulis.darius@gmail.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

This just leaves include/asm-arm/plat-* to deal with.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Remove includes of asm/hardware.h in addition to asm/arch/hardware.h.
Then, since asm/hardware.h only exists to include asm/arch/hardware.h,
update everything to directly include asm/arch/hardware.h and remove
asm/hardware.h.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Simplify architecture's irq headers and sources, to share these files
between MXC3 and MXC2.
Signed-off-by: NJuergen Beisert <j.beisert@pengutronix.de>

From: Juergen Beisert <j.beisert@pengutronix.de>

This patch separates the current code into i.MX2 and i.MX3 and modifies
the Kconfig files to reflect this separation in the menus.

Things happend since last review:
 - make i.MX3 compile again
 - fix some structure names to be conform with all the shared/common
   sources from i.MX1/i.MX2

Previous changes:
 - stay conform to other Kconfig files (note from Russell King)
Signed-off-by: NJuergen Beisert <j.beisert@pengutronix.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

From: Juergen Beisert <j.beisert@pengutronix.de>

Clean up current header files from doxygen style comments. There are
probably more such comments left, but we start with these.

Things happend since last review:
 - needless blank lines removed (note by Russell King)
 - re-format comments (note by Ross Wille)
Signed-off-by: NJuergen Beisert <j.beisert@pengutronix.de>
Signed-off-by: NRoss Wille <wille@freescale.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch adds the foundation pieces for
the Freescale MXC platforms, including
i.MX2 and i.MX3 based systems.

The bare-bones MX31 support in this patch
boots to the rootdev panic with 8250 serial
console configured "console=ttyS0,115200".
It assumes that Redboot is the boot loader.
Signed-off-by: NQuinn Jensen <quinn.jensen@freescale.com>
Acked-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>