arch/arm/mach-ep93xx/include/mach/hardware.h
  1. Properly name the include files so that they are loaded
     from the <mach/*> directory and not the local directory.
  2. Remove including the ts72xx.h header.  This header is not
     generic to the ep93xx platform.  It should only be included
     by the ts72xx specific files that require it.  The only
     two users in the tree are arch/arm/mach-ep93xx/ts72xx.c
     and drivers/mtd/nand/ts7250.c.

arch/arm/mach-ep93xx/include/mach/ts72xx.h
  1. <linux/io.h> should already be included by any user of this
     header.  Doing the include here hides it from being needed
     by the calling source file.

arch/arm/mach-ep93xx/core.c
  1. Remove unnecessary headers.  They were probably included
     originally due to cut-and-paste from other files.
  2. <linux/io.h> should be included not <mach/gpio.h>

arch/arm/mach-ep93xx/adsphere.c
arch/arm/mach-ep93xx/edb93xx.c
arch/arm/mach-ep93xx/gesbc9312.c
arch/arm/mach-ep93xx/micro9.c
arch/arm/mach-ep93xx/ts72xx.c
  1. Remove unnecessary headers.

arch/arm/mach-ep93xx/ts72xx.c
  1. Remove unnecessary headers.
  2. Add platform specific header <mach/ts72xx.h>.

drivers/mtd/nand/ts7250.c
  1. <linux/io.h> should be included not <asm/io.h>.
  2. Add platform specific header <mach/ts72xx.h>.

Cc: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add clkdev support for the ep93xx_keypad driver.

A matrix keypad driver for the ep93xx just got merged via the
input subsystem group.  For this driver to work the keypad clock
needs to be added to the ep93xx clkdev support.  In order to
accomplish this the following changes are implemented:

  1) Move the EP93XX_EXT_*_RATE defines to mach/include/hardware.h.
  2) Add EP93XX_KEYTCHCLK_DIV{4/16} for the keypad driver.
  3) Add support for programmable clocks (set_rate() callback).
  4) Add clk_keypad for the keypad driver.
  5) tab indent the clk_lookup table for easier reading.
  6) Add the set_rate() callback to program the keypad clock.
     This callback is generalized since the ADC clock (touchscreen)
     can use the same callback.
  7) Use the ep93xx_syscon_swlocked_write() core function for updating
     the software locked register.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NRyan Mallon <ryan@bluewatersys.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Remove the gesbc9312.h header since it is unused.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This just leaves include/asm-arm/plat-* to deal with.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Remove includes of asm/hardware.h in addition to asm/arch/hardware.h.
Then, since asm/hardware.h only exists to include asm/arch/hardware.h,
update everything to directly include asm/arch/hardware.h and remove
asm/hardware.h.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

This patch adds support for the Cirrus ep93xx series of CPUs.  The
ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs,
IrDA, MaverickCrunch floating point coprocessor, between 24 and 64
GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster
engine, graphics accelerator, IDE controller and a bunch of other
stuff.

This patch adds the core ep93xx support code, and support for the
Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>