Since the conservative govenor was released its codebase has drifted from the
the direction and updates that have been applied to the ondemand govornor.

This patch addresses the lack of updates in that period and brings
conservative back up to date.  The resulting diff file between
cpufreq_ondemand.c and cpufreq_conservative.c is now much smaller and shows
more clearly the differences between the two.

Another reason to do this is ages ago, knowingly, I did a piss poor attempt
at making conservative less responsive by knocking up
DEF_SAMPLING_RATE_LATENCY_MULTIPLIER by two orders of magnitude.  I did fix
this ages ago but in my dis-organisation I must have toasted the diff and
left it the way it was.  About two weeks ago a user contacted me saying he
was having problems with the conservative governor with his AMD Athlon XP-M
2800+ as /sys/devices/system/cpu/cpu0/cpufreq/conservative showed
  sampling_rate_min   9950000
  sampling_rate_max   1360065408

Nine seconds to decide about changing the frequency....not too responsive :)
Signed-off-by: NAlexander Clouter <alex-kernel@digriz.org.uk>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

* master.kernel.org:/home/rmk/linux-2.6-serial:
  [ARM] 3383/3: ixp2000: ixdp2x01 platform serial conversion
  [SERIAL] amba-pl010: Remove accessor macros
  [SERIAL] remove 8250_acpi (replaced by 8250_pnp and PNPACPI)
  [SERIAL] icom: select FW_LOADER

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3030/2: fix permission check in the obscur cmpxchg syscall
  [ARM] nommu: rename compressed/head.S symbols to a new style
  [ARM] select TLS_REG_EMUL and NEEDS_SYSCALL_FOR_CMPXCHG
  [ARM] nommu: Move hardware page table definitions to pgtable-hwdef.h
  [ARM] Move read of processor ID out of lookup_processor_type()
  [ARM] Fix typo in tlbflush.h
  [ARM] noMMU: removes TLB codes in nommu mode
  [ARM] noMMU: block sys_fork in nommu mode
  [ARM] 3399/1: Fix link problem when CONFIG_PRINTK is disabled
  [ARM] 3398/1: Fix the VFP registers loading/storing base address
  [ARM] 3397/1: AT91RM9200 Header update
  [ARM] 3385/1: Battery support for sharp zaurus sl-5500 (collie)
  [ARM] SMP: don't set cpu_*_map in smp_prepare_boot_cpu
  include/linux/clk.h is betraying its ARM origins
  [ARM] Move enable_irq and disable_irq to assembler.h
  [ARM] 3391/1: use PLAT8250_DEV_PLATFORM{,1} for platform device id instead of 0/1

Broken earlier by me by a x86-64 patch.

The code was optimized away, but the compiler still complained about an
undeclared function.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Patch from Lennert Buytenhek

Add a PLAT8250_DEV_PLATFORM2, and convert the two ixdp2x01 CPLD serial
ports to use platform serial devices with ids PLAT8250_DEV_PLATFORM[12].
(The on-chip xscale UART is PLAT8250_DEV_PLATFORM, id #0.)
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Nicolas Pitre

Quoting RMK:

|pte_write() just says that the page _may_ be writable. It doesn't say
|that the MMU is programmed to allow writes. If pte_dirty() doesn't
|return true, that means that the page is _not_ writable from userspace.
|If you write to it from kernel mode (without using put_user) you'll
|bypass the MMU read-only protection and may end up writing to a page
|owned by two separate processes.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Fix merge conflict in arch/arm/mm/proc-xscale.S
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Malcolm Parsons

Printking a backtrace requires printk, so disable backtrace code
when printk is disabled.

Without this patch, a kernel with CONFIG_PRINTK disabled does not link:

arch/arm/lib/lib.a(backtrace.o): In function `c_backtrace':
arch/arm/lib/backtrace.S:(.text+0x108): undefined reference to `printk'
arch/arm/lib/backtrace.S:(.text+0x11c): undefined reference to `printk'
arch/arm/lib/lib.a(backtrace.o):(.fixup+0x8): undefined reference to `printk'
Signed-off-by: NMalcolm Parsons <malcolm.parsons@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Catalin Marinas

The current VFP code corrupts the VFP registers (including the control
ones) if more than one floating point application is executed at the same
time. This patch fixes the updating of the load/store base addresses for
the VFP registers.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Andrew Victor

This patch updates the hardware header to include definitions for the
Memory Controller registers.
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Pavel Machek

This adds support for battery reading on collie. Collie slowly charges
battery even with charging disabled, so I did not yet enable fast
charge.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The recent addition of boot_cpu_init() implements the initialisation
of the online, present and possible cpu maps for the boot CPU, so
there is no reason to duplicate this in the architecture
smp_prepare_boot_cpu() hook.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Remove unnecessary accessor macros, using readb/writel directly
instead.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Don't rely on fixup_cpu_present_map() to do this as that function
is about to be removed.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

include/linux/clk.h is betraying its ARM origins.
Signed-off-by: NTodd Poynor <tpoynor@mvista.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

With the combination of PNPACPI and 8250_pnp, we no longer need 8250_acpi.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The icom driver uses request_firmware()
and thus needs to select FW_LOADER.
Signed-off-by: Nmaximilian attems <maks@sternwelten.at>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

It takes a size_t, not an int, as its third argument.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'audit.b3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: (22 commits)
  [PATCH] fix audit_init failure path
  [PATCH] EXPORT_SYMBOL patch for audit_log, audit_log_start, audit_log_end and audit_format
  [PATCH] sem2mutex: audit_netlink_sem
  [PATCH] simplify audit_free() locking
  [PATCH] Fix audit operators
  [PATCH] promiscuous mode
  [PATCH] Add tty to syscall audit records
  [PATCH] add/remove rule update
  [PATCH] audit string fields interface + consumer
  [PATCH] SE Linux audit events
  [PATCH] Minor cosmetic cleanups to the code moved into auditfilter.c
  [PATCH] Fix audit record filtering with !CONFIG_AUDITSYSCALL
  [PATCH] Fix IA64 success/failure indication in syscall auditing.
  [PATCH] Miscellaneous bug and warning fixes
  [PATCH] Capture selinux subject/object context information.
  [PATCH] Exclude messages by message type
  [PATCH] Collect more inode information during syscall processing.
  [PATCH] Pass dentry, not just name, in fsnotify creation hooks.
  [PATCH] Define new range of userspace messages.
  [PATCH] Filter rule comparators
  ...

Fixed trivial conflict in security/selinux/hooks.c

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/aoe-2.6:
  [PATCH] aoe [3/3]: update version to 22
  [PATCH] aoe [2/3]: don't request ATA device ID on ATA error
  [PATCH] aoe [1/3]: support multiple AoE listeners
  [PATCH] aoe: do not stop retransmit timer when device goes down
  [PATCH] aoe [8/8]: update driver version number
  [PATCH] aoe [7/8]: update driver compatibility string
  [PATCH] aoe [6/8]: update device information on last close
  [PATCH] aoe [5/8]: allow network interface migration on packet retransmit
  [PATCH] aoe [4/8]: use less confusing driver name
  [PATCH] aoe [3/8]: increase allowed outstanding packets
  [PATCH] aoe [2/8]: support dynamic resizing of AoE devices
  [PATCH] aoe [1/8]: zero packet data after skb allocation

* git://git.linux-nfs.org/pub/linux/nfs-2.6: (103 commits)
  SUNRPC,RPCSEC_GSS: spkm3--fix config dependencies
  SUNRPC,RPCSEC_GSS: spkm3: import contexts using NID_cast5_cbc
  LOCKD: Make nlmsvc_traverse_shares return void
  LOCKD: nlmsvc_traverse_blocks return is unused
  SUNRPC,RPCSEC_GSS: fix krb5 sequence numbers.
  NFSv4: Dont list system.nfs4_acl for filesystems that don't support it.
  SUNRPC,RPCSEC_GSS: remove unnecessary kmalloc of a checksum
  SUNRPC: Ensure rpc_call_async() always calls tk_ops->rpc_release()
  SUNRPC: Fix memory barriers for req->rq_received
  NFS: Fix a race in nfs_sync_inode()
  NFS: Clean up nfs_flush_list()
  NFS: Fix a race with PG_private and nfs_release_page()
  NFSv4: Ensure the callback daemon flushes signals
  SUNRPC: Fix a 'Busy inodes' error in rpc_pipefs
  NFS, NLM: Allow blocking locks to respect signals
  NFS: Make nfs_fhget() return appropriate error values
  NFSv4: Fix an oops in nfs4_fill_super
  lockd: blocks should hold a reference to the nlm_file
  NFSv4: SETCLIENTID_CONFIRM should handle NFS4ERR_DELAY/NFS4ERR_RESOURCE
  NFSv4: Send the delegation stateid for SETATTR calls
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart:
  [AGPGART] x86_64: Enable VIA AGP driver on x86-64 for VIA P4 chipsets
  [AGPGART] x86_64: Fix wrong PCI ID for ALI M1695 AGP bridge
  [AGPGART] ATI RS350 support.
  [AGPGART] Lots of CodingStyle/whitespace cleanups.

Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

DEBUG_KERNEL is often enabled just for sysrq, but this doesn't
mean the user wants more heavyweight debugging information.

Cc: jbeulich@novell.com
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Noticed by Andrew Morton.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

tcsh is not happy with the -9999 error code.

Suggested by Ernie Petrides
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I got an oops on a dual core system because the lost tick handler
called cpufreq_get() on core 1 and powernow tried to follow
a NULL powernow_data[] pointer there.

Initialize powernow_data for all cores of a CPU.

Cc: Jacob Shin <jacob.shin@amd.com>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

No need to restrict to power of two here.

TBD needs more double checking
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

pfn_to_page() and others need to access both memnode_shift and the very
first bytes of memnodemap[]. If we force memnode_shift to be just before the
memnodemap array, we can reduce the memory footprint to one cache line
instead of two for most setups. This patch introduce a 'memnode' structure
where shift and map[] are carefully placed.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

register_die_notifier is exported twice, once in traps.c and once in
x8664_ksyms.c.  This results in a warning on build.
Signed-off-by: NKevin Winchester <kwin@ns.sympatico.ca>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

arch/x86_64/kernel/aperture.c: The search for the AGP bridge has been
extended to search for all the 256 buses instead of the first 32. This
is required since on a some systems, the bridge may be located on a bus
much farther than the first 32. By searching all 256 buses, we guarantee
that the search succeeds on such systems.

arch/x86_64/kernel/pci-gart.c: The search for the Northbridge is not
limited to just bus 0 anymore. This is required because on certain
systems, we may not find one on bus 0.
Signed-off-by: NNavin Boppuri <navin.boppuri@newisys.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

For consistency with other architectures
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Have the GART_IOMMU help text specify that this is the hardware IOMMU in
amd64 processors.  This will be significant if/when other IOMMUs are
added to the x86-64 architecture. :-)

Also, note that the previous help text stated that IOMMU was needed for
>3GB memory instead of >4GB.  This is fixed in the newer version.
Signed-off-by: NJon Mason <jdmason@us.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It was a failed experiment - all benchmarks done with it on both AMD
and Intel showed it was a loss. That was probably because the store
buffers of the CPUs for write combining traffic weren't large enough.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Spec just got published so we know the CPUID bit.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

free_bootmem_node expects a physical address to be passed in, but
__alloc_bootmem_node returns a virtual one.  That address needs to be
translated to physical.
Signed-off-by: NJon Mason <jdmason@us.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

o check_timer() routine fails while second kernel is booting after a crash
  on an opetron box. Problem happens because timer vector (0x31) seems to be
  locked.

o After a system crash, it is not safe to service interrupts any more, hence
  interrupts are disabled. This leads to pending interrupts at LAPIC. LAPIC
  sends these interrupts to the CPU during early boot of second kernel. Other
  pending interrupts are discarded saying unexpected trap but timer interrupt
  is serviced and CPU does not issue an LAPIC EOI because it think this
  interrupt came from i8259 and sends ack to 8259. This leads to vector 0x31
  locking as LAPIC does not clear respective ISR and keeps on waiting for
  EOI.

o This patch issues extra EOI for the pending interrupts who have ISR set.

o Though today only timer seems to be the special case because in early
  boot it thinks interrupts are coming from i8259 and uses
  mask_and_ack_8259A() as ack handler and does not issue LAPIC EOI. But
  probably doing it in generic manner for all vectors makes sense.
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

cpu_vm_mask is of type cpumask_t, so use the proper bitops.
Signed-off-by: NBrian Gerst <bgerst@didntduck.org>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This fixes problems with very large nodes (over 128GB) filling up all of
the first 4GB with their mem_map and not leaving enough space for the
swiotlb.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>