Signed-off-by: NPeter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The scale would result in uV instead of expected mV.
Mostly cosmetic, since the value of 'Power' was computed OK.
Signed-off-by: NMarc Titinger <marc.titinger@baylibre.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Add signed differential channels and update the voltage scale for
differential conversions.
Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Do not erase previous configuration of the mode register when setting
the sampling frequency.
Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The following functionalities are supported:
 - write, read from volatile memory

Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/22060b.pdfSigned-off-by: NSlawomir Stepien <sst@poczta.fm>
Reviewed-by: NJoachim Eastwood <manabian@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Fix following sparse warning:
warning: cast to restricted __be16
Signed-off-by: NKsenija Stanojevic <ksenija.stanojevic@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The members buffer_group and attrs of iio_buffer_access_funcs have no
descriptions for the documentation. Adding them.

Fixes: 08e7e0ad ("iio: buffer: Allocate standard attributes in the core")
Signed-off-by: NLuis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

All the ST Sensors use the old "<foo>-trigger" rather than the
standard "<foo>-devN" new standard suffix for triggers. Now much
to do about it since it is ABI, but make the testing tools
recognize it too.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Commit 845c8770 ("i2c / ACPI: Assign IRQ for devices that have
GpioInt automatically") automatically assigns the first ACPI GPIO
interrupt in client->irq, so we can remove the probing code from
drivers that use only one interrupt.

Commit 0f079650 ("iio: remove gpio interrupt probing from drivers
that use a single interrupt") removes gpio interrupt probing from most
drivers. This patch cleans the remaining ones.
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

GPIO handling code has been removed from the drivers (since
this is now handled by the ACPI core) in commit 0f079650 ("iio:
remove gpio interrupt probing from drivers that use a single interrupt").

Remove the include for linux/gpio/consumer.h since it is no longer
used.
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Some i2c busses (e.g.: Synopsys DesignWare I2C adapter) need to
enable/disable the bus at each i2c transfer and must wait for
the enable/disable to happen before sending the data.

When reading data in the trigger handler, the kxcjk-1013 accel driver
does one i2c transfer for each axis. This has an impact on the
frequency of the accelerometer at high sample rates due to additional
delays introduced by the i2c bus at each transfer.

Reading all axis values in one i2c transfer reduces the delays
introduced by the i2c bus. Uses i2c_smbus_read_i2c_block_data_or_emulated
that will fallback to reading each axis as a separate word in case i2c
block read is not supported.
Signed-off-by: NAdriana Reus <adriana.reus@intel.com>
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Acked-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Use available_scan_masks to allow the iio core to select
the data to send to userspace depending on which axes are
enabled, instead of doing this in the driver's interrupt
handler.
Signed-off-by: NAdriana Reus <adriana.reus@intel.com>
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Acked-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Some i2c busses (e.g.: Synopsys DesignWare I2C adapter) need to
enable/disable the bus at each i2c transfer and must wait for
the enable/disable to happen before sending the data.

When reading data in the trigger handler, the bmg160 gyro driver does
one bus transfer for each axis. This has an impact on the frequency
of the accelerometer at high sample rates due to additional delays
introduced by the bus at each transfer.

Reading all axis values in one bus transfer reduces the delays
introduced by the bus.
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Use available_scan_masks to allow the iio core to select
the data to send to userspace depending on which axes are
enabled, instead of doing this in the driver's interrupt
handler.
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Some i2c busses (e.g.: Synopsys DesignWare I2C adapter) need to
enable/disable the bus at each i2c transfer and must wait for
the enable/disable to happen before sending the data.

When reading data in the trigger handler, the bmc150 accel driver does
one bus transfer for each axis. This has an impact on the frequency
of the accelerometer at high sample rates due to additional delays
introduced by the bus at each transfer.

Reading all axis values in one bus transfer reduces the delays
introduced by the bus.
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Use available_scan_masks to allow the iio core to select
the data to send to userspace depending on which axes are
enabled, instead of doing this in the driver's interrupt
handler.
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Use const pointer to element from model configuration array rather then array
index, as it will not change anyway.
Signed-off-by: NSlawomir Stepien <sst@poczta.fm>
Signed-off-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Use kernel preferred unsigned int declaration style.

Patch created using:
git ls-files drivers/staging/iio | \
xargs ./scripts/checkpatch.pl -f --fix-inplace --types=unspecified_int

Hand edits restored columns in structure definitions.
Signed-off-by: NAlison Schofield <amsfield22@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The driver goes to some length to dynamically allocate an array
to hold the channel addresses. However no ST sensor has more than
three channels (x, y, z at most). Instead of kmalloc():ing and
kfree():in the address array, just use a fixed array of three
elements.

Cc: Giuseppe Barba <giuseppe.barba@st.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NDenis Ciocca <denis.ciocca@st.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The user (or an init script) may setup RShunt via sysfs after the
driver was initialized, for instance based on the EEPROM contents
of a modular probe. The calibration register must be set accordingly.
Signed-off-by: NMarc Titinger <marc.titinger@baylibre.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Ensure optional regulator is properly disabled when present.

Fixes: 63d5d525 ("iio:magnetometer:ak8975: power regulator support")
Signed-off-by: NGregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

flush_scheduled_work is scheduled for deprecation.
Replace cancel_delayed_work and flush_scheduled_work with
cancel_delayed_work_sync instead to ensure there is no pending or
running work item.

Since there is only one work item, chip->poweroff_work, there are
no further dependencies of flush_scheduled_work().
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NAmitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Ensure optional regulator is properly disabled when present.

Fixes: 3145229f ("iio:pressure:ms5611: power regulator support")
Signed-off-by: NGregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

When using ACPI, id is NULL and the current code automatically
defaults name to NULL and chip id to 0. We should instead use
the data provided in the ACPI device table.

Fixes: c816d9e7 ("iio: imu: mpu6050: fix possible NULL dereferences")
Signed-off-by: NDaniel Baluta <daniel.baluta@intel.com>
Reviewed-By: NMatt Ranostay <matt.ranostay@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The ADC is a 6-channel signal-ended 10-bit Successive
Approximation Register (SAR) A/D Converter.
Signed-off-by: NDavid Wu <david.wu@rock-chips.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Driver includes struct regmap and struct device in its global data.
Remove the struct device and use regmap API to retrieve device info.

Simplified version of Coccinelle semantic patch used:

@ a @
identifier drvdata, r;
position p;
@@
  struct drvdata@p {
  ...
  struct regmap *r;
  ...
  };

@ b @
identifier a.drvdata, d;
position a.p;
@@
  struct drvdata@p {
  ...
- struct device *d;
  ...
  };

@ passed depends on b @
identifier a.drvdata, a.r, b.d, i, f;
@@
  f (..., struct drvdata *i ,...) {
+ struct device *dev = regmap_get_device(i->r);
   <+...
-	   i->d
+	   dev
   ...+>
  }
Signed-off-by: NAlison Schofield <amsfield22@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

add recently added channel types and modifiers
Signed-off-by: NPeter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

What is this autosleep?
-----------------------
It slows down the device after x seconds of inactivity. The thing is, we have
really achieved almost the same by runtime pm.

differnces are:

autosleep
 * uses more power during inactivity
 * the first read after inactivity slightly faster
 * complicated to understand for the user
 * no documented sysfs interface (afaik)
 * complicated to read and maintain

runtime pm
 * already merged in mma8452
 * uses less power during inactivity
 * first read after inactivity slower
 * easy to use. well documented.
 * easy to maintain and understand

The two approaches solve the same problem. runtime pm has more advantages
than autosleep and comes quite close to it's behaviour anyways. As I see it,
autosleep, even if somehow supported, would never be used anyways.

So resolve this issue by "ignoring" autosleep.
Signed-off-by: NMartin Kepplinger <martink@posteo.de>
Reviewed-by: NMartina Kepplinger <martina.novakovic@zoho.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This was forgotten about and is added for consistency now
Signed-off-by: NMartin Kepplinger <martink@posteo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Signed-off-by: NPeter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

happily married for 4 month :)
Signed-off-by: NPeter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Add base support for the 10-bit DAC peripheral found
on NXP LPC18xx/43xx SoCs.

This is a minimal driver that does not support DMA or
interrupts.

User manual with register description can be found on:
LPC18xx: www.nxp.com/documents/user_manual/UM10430.pdf
LPC43xx: www.nxp.com/documents/user_manual/UM10503.pdf
Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Add base support for the 10-bit SAR ADC peripheral found
on NXP LPC18xx/43xx SoCs.

This is a minimal driver that does not support burst mode,
interrupts, DMA or hardware triggers.

User manual with register description can be found on:
LPC18xx: www.nxp.com/documents/user_manual/UM10430.pdf
LPC43xx: www.nxp.com/documents/user_manual/UM10503.pdf
Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Replace the code that guarantees the device stays in direct mode with
iio_device_{claim|release}_direct_mode() which does same.
Signed-off-by: NAlison Schofield <amsfield22@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

It is often the case that the driver wants to be sure a device stays
in direct mode while it is executing a task or series of tasks.  To
accomplish this today, the driver performs this sequence: 1) take the
device state lock, 2) verify it is not in a buffered mode, 3) execute
some tasks, and 4) release that lock.

This patch introduces a pair of helper functions that simplify these
steps and make it more semantically expressive.

iio_device_claim_direct_mode()
        If the device is not in any buffered mode it is guaranteed
        to stay that way until iio_release_direct_mode() is called.

iio_device_release_direct_mode()
        Release the claim. Device is no longer guaranteed to stay
        in direct mode.
Signed-off-by: NAlison Schofield <amsfield22@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This adds support for Freescale's (now NXP's) FXLS8471Q accelerometer.

We use MMA8451Q's configuration because for what the driver supports,
FXLS8471Q is the same.

Support for FXLS8471Q's features (fast SPI interface and a larger FIFO,
among others) can be added to this driver anytime.

See it's datasheet for the details:
http://cache.nxp.com/files/sensors/doc/data_sheet/FXLS8471Q.pdfSigned-off-by: NMartin Kepplinger <martink@posteo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This commit adds support for STMicroelectronics h3lis331dl high-g
accelerometer. The datasheet for this device can be found here:

http://www.st.com/web/en/resource/technical/document/
datasheet/DM00053090.pdf
Signed-off-by: NTiberiu Breana <tiberiu.a.breana@intel.com>
Reviewed-by: NDenis Ciocca <denis.ciocca@st.com>
Acked-by: NDenis Ciocca <denis.ciocca@st.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The ADIS16220 part has been obsoleted, which makes it hard to get the
hardware to even test the driver. Considering this there is no expectation
that the driver will be cleaned up and be able to move out of staging, so
remove the driver.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>