- 26 3月, 2014 3 次提交
-
-
由 David S. Miller 提交于
This fixes: drivers/net/xen-netback/netback.c: In function ‘xenvif_tx_dealloc_action’: drivers/net/xen-netback/netback.c:1573:8: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘long int’ [-Wformat=] Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zoltan Kiss 提交于
This reverts commit e9275f5e. This commit is the last in the netback grant mapping series, and it tries to do more aggressive aggreagtion of unmap operations. However practical use showed almost no positive effect, whilst with certain frontends it causes significant performance regression. Signed-off-by: NZoltan Kiss <zoltan.kiss@citrix.com> Acked-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/net-next由 David S. Miller 提交于
Eric W. Biederman says: ==================== Using dev_kfree/consume_skb_any for functions called in multiple contexts These changes are a result of walking through the network drivers supporting netpoll and verifying the code paths that netpoll can cause to be called in hard irq context use an appropriate flavor of kfree_skb. Either dev_kfree_skb_any or dev_consume_skb_any. Since my last pass at this I have become aware of the small differences between dev_kfree_skb_any and dev_consume_skb_any. net/core/drop_monitor.c reports the dev_kfree_skb_any as a drop and while being quite about the second. With the weird twist that dev_kfree_skb is unintuitively consume_skb. As netpoll now calls the napi poll function with budget == 0, pieces of a drivers the napi poll function that don't run when budget == 0 have been ignored. The most interesting change is to the atl1c which tried unsuccesfully to tell one of it's functions which context it is called in so that it could call dev_kfree_skb_irq or dev_kfree_skb as appropriate. I have just removed the extra parameter and called dev_consume_skb_any. At 54 separate changes I will post each change as a separate patch (so they can be reviewed) but for general sanity sake I have gathered them all into a git branch for easy acces. ==================== Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 3月, 2014 37 次提交
-
-
由 Eric W. Biederman 提交于
Replace kfree_skb with dev_kfree_skb_any in vlan_insert_tag as vlan_insert_tag can be called from hard irq context (netpoll) and from other contexts. dev_kfree_skb_any is used as vlan_insert_tag only frees the skb if the skb can not be modified to insert a tag, in which case vlan_insert_tag drops the skb. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_kfree_skb_any in start_xmit which can be called in hard irq and other contexts. start_xmit only frees skbs that it is dropping. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_kfree_skb_any in cvm_oct_xmit_pow which can be called in hard irq and other contexts, on the code paths that drop packets. Replace dev_kfree_skb with dev_consume_skb_any in cvm_oct_xmit_pow which can be called in hard irq and other contexts, on the code path where the packet is transmitted successfully. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_consume_skb_any in wl_send and wl_send_dma which can be called in hard irq and other contexts, on the code paths where the skb was transmitted successfully. Replace dev_kfree_skb with dev_kfree_skb_any in wl_send_dmay which can be called in hard irq and other contexts, on the code path where a skb is dropped. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_kfree_skb_any in xennet_start_xmit which can be called in hard irq and other contexts. xennet_start_xmit only fress skbs which it drops. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_kfree_skb_any in vmnet3_tx_xmit which can be called in hard irq and other contexts. vmnet3_tx_xmit only frees skbs that it has dropped. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_consume_skb_any in xemaclite_send which can be called in hard irq and other contexts. xemacelite_send only frees skbs that it has successfully transmitted. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_kfree_skb_any in velocity_xmit that can be called in hard irq and other contexts. Packets are freed and dropped in velocity_xmit when they are too fragmented and can not be linearized. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_kfree_skb_any in rhine_start_tx which can be called in hard irq and other contexts. Packets are only freed in rhine_start_tx if they are dropped. Replace dev_kfree_skb with dev_consume_skb_any in rhine_tx that can be called in hard irq and other contexts. rhine_tx handles successfully transmitted packets. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_consume_skb_any in spider_net_release_tx_chain which can be called in hard irq and other contexts. dev_consume_skb_any was choosen as it preserves the current dev_kfree_skb semantics (dev_kfree_skb is consume_skb) and is because it is correct most of the time as most packets will have been successfully transmitted not dropeed. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace kfree_skb with dev_consume_skb_any in tile_net_tx and tile_net_tx_tso which can be called in hard irq and other contexts. At the point where the skbs are freed a packet has been successfully transmitted so dev_consume_skb_any is the appropriate variant to use. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_consume_skb_any in gem_tx which can be called in hard irq and other contexts. gem_tx handles successfully transmitted packets. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_consume_skb_any in stmmac_tx_clean that can be called in hard irq and other contexts. stmmac_tx_clean handles freeing successfully transmitted packets. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_consume_skb_any in smsc911x_hard_xmit which can be called in hard irq and other contexts. smsc911x_hard_xmit always transmits and consumes the specified skb. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_consume_skb_any in smc_hardware_send_pkt that can be called in hard irq and other contexts, and handles successfully transmitted packets. Replace dev_kfree_skb with dev_kfree_skb_any in smc_hard_start_xmit which can be called in hard irq and other contexts, and only frees skbs when dropping them. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_kfree_skb_any in functions that can be called in hard irq and other contexts. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_kfree_skb_any in functions that can be called in hard irq and other contexts. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_consume_skb_any in sc92031_start_xmit that can be called in hard irq and other contexts. Using dev_consume_skb_any preserves the current semantics (as dev_kfree_skb is just consume_skb) and since packet drops are rare is usually accurate. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace kfree_skb with dev_kfree_skb_any in functions that can be called in hard irq and other contexts. Every location changes is a drop making dev_kfree_skby_any appropriate. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_kfree_skb_any in vxge_xmit that can be called in hard irq and other contexts. vxge_xmit only calls dev_kfree_skb_any when errors result in dropping skbs. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_kfree_skb_any in s2io_xmit that can be called in hard irq and other contexts. All instances that are changed are packet drops. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_consume_skb_any in copy_old_skb that can be called in hard irq and other contexts. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_kfree_skb_any in sky2_xmit_frame that can be called in hard irq and other contexts. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_kfree_skb_any skge_xmit_free that can be called in hard irq and other contexts, on the path that handles dropped packets. Replace dev_kfree_skb with dev_consume_skb_any in skge_tx_done that can be called in hard irq and other contexts, on the path that handles successfully transmitted skbs. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_kfree_skb_any in mv643xx_eth_xmit and txq_submit_skb that can be called in hard irq and other contexts, on paths where the skbs are dropped. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_kfree_skb_any in jme_expand_header that can be called in hard irq and other contexts, on the failure path where the skb is dropped. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_consume_skb_any in ibmveth_start_xmit that can be called in hard irq and other contexts. In this code path the packet can have either been transmitted or dropped, dev_consume_skb_any was choosen because that preserves the existing semantics of the code, and a transmitted packet is more likely. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_consume_skb_any in functions that can be called in hard irq and other contexts. None of the locations was a packet drop so dev_kfree_skb_any is inappropriate. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_kfree_skb_any in i596_start_xmit that can be called in hard irq and other contexts, when the skb is dropped. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_consume_skb_any in ucc_geth_tx that can be called in hard irq and other contexts, when processing the tx completion event. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace kfree_skb with dev_kfree_skb_any in fec_enet_start_xmit that can be called in hard irq and other contexts, when the packet is dropped. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_kfree_skb_any in start_tx that can be called in hard irq and other contexts, when the skb is dropped. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_kfree_skb_any in uli562x_start_xmit that can be called in hard irq and other contexts, when the packet is dropped. Replace dev_kfree_skb with dev_consume_skb_any in uli562x_start_xmit that can be called in hard irq and other contexts, when the packet is transmitted. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_kfree_skb_any in dmfe_start_xmit that can be called in hard irq and other contexts, when the packet is dropped. Replace dev_kfree_skb with dev_consume_skb_any in dmfe_start_xmit that can be called in hard irq and other contexts, when the packet is transmitted. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_consume_skb_any in dm9000_start_xmit that can be called in hard irq and other contexts, on the path that successfully transmits the packet. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_kfree_skb_any in enic_hard_start_xmit that can be called in hard irq and other contexts. enic_hard_start_xmit only frees the skb when dropping it. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Replace dev_kfree_skb with dev_consume_skb_any in net_send_packet that can be called in hard irq and other contexts. net_send_packet consumes (not drops) the skb of interest. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-