- 05 11月, 2011 1 次提交
-
-
由 Or Gerlitz 提交于
The driver counted on the transactional nature of iSCSI login/text flows and used the same buffer for both the request and the response. We also went further and did DMA mapping only once, with DMA_FROM_DEVICE, which violates the DMA mapping API. Fix that by using different buffers, one for requests and one for responses, and use the correct DMA mapping direction for each. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 18 8月, 2011 1 次提交
-
-
由 Or Gerlitz 提交于
The code that prepares the SG associated with SCSI command for FMR was buggy for systems with DMA addresses that don't fit in unsigned long, e.g under the 32-bit based XenServer dom0 sizeof(dma_addr_t) is 8. Fix that by casting to unsigned long long a masking constant used by the code. This resolves a crash in iser_sg_to_page_vec on this system. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 07 6月, 2011 1 次提交
-
-
由 Alexey Dobriyan 提交于
* remove interrupt.g inclusion from netdevice.h -- not needed * fixup fallout, add interrupt.h and hardirq.h back where needed. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 3月, 2011 1 次提交
-
-
由 Lucas De Marchi 提交于
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
-
- 13 5月, 2010 2 次提交
-
-
由 Or Gerlitz 提交于
The iser connection teardown flow isn't over until the underlying Connection Manager (e.g the IB CM) delivers a disconnected or timeout event through the RDMA-CM. When the remote (target) side isn't reachable, e.g when some HW e.g port/hca/switch isn't functioning or taken down administratively, the CM timeout flow is used and the event may be generated only after relatively long time -- on the order of tens of seconds. The current iser code exposes this possibly long delay to higher layers, specifically to the iscsid daemon and iscsi kernel stack. As a result, the iscsi stack doesn't respond well: this low-level CM delay is added to the fail-over time under HA schemes such as the one provided by DM multipath through the multipathd(8) service. This patch enhances the reference counting scheme on iser's IB connections so that the disconnect flow initiated by iscsid from user space (ep_disconnect) doesn't wait for the CM to deliver the disconnect/timeout event. (The connection teardown isn't done from iser's view point until the event is delivered) The iser ib (rdma) connection object is destroyed when its reference count reaches zero. When this happens on the RDMA-CM callback context, extra care is taken so that the RDMA-CM does the actual destroying of the associated ID, since doing it in the callback is prohibited. The reference count of iser ib connection normally reaches three, where the <ref, deref> relations are 1. conn <init, terminate> 2. conn <bind, stop/destroy> 3. cma id <create, disconnect/error/timeout callbacks> With this patch, multipath fail-over time is about 30 seconds, while without this patch, multipath fail-over time is about 130 seconds. Signed-off-by: NOr Gerlitz <ogerlitz@voltaire.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Or Gerlitz 提交于
Add handler to handle events such as port up and down. This is useful when testing high-availability schemes such as multi-pathing. Signed-off-by: NOr Gerlitz <ogerlitz@voltaire.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 25 2月, 2010 6 次提交
-
-
由 Or Gerlitz 提交于
Remove unnecessary checks for the IB connection state and for QP overflow, as conn state changes are reported by iSER to libiscsi and handled there. QP overflow is theoretically possible only when unsolicited data-outs are used; anyway it's being checked and handled by HW drivers. Signed-off-by: NOr Gerlitz <ogerlitz@voltaire.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Or Gerlitz 提交于
Simplify and shrink the logic/code used for the send descriptors. Changes include removing struct iser_dto (an unnecessary abstraction), using struct iser_regd_buf only for handling SCSI commands, using dma_sync instead of dma_map/unmap, etc. Signed-off-by: NOr Gerlitz <ogerlitz@voltaire.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Or Gerlitz 提交于
Use a different CQ for send completions, where send completions are polled by the interrupt-driven receive completion handler. Therefore, interrupts aren't used for the send CQ. Signed-off-by: NOr Gerlitz <ogerlitz@voltaire.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Or Gerlitz 提交于
Now that both the posting and reaping of receive buffers is done in the completion path, the counter of outstanding buffers not be atomic. Signed-off-by: NOr Gerlitz <ogerlitz@voltaire.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Or Gerlitz 提交于
Currently, the recv buffer posting logic is based on the transactional nature of iSER which allows for posting a buffer before sending a PDU. Change this to post only when the number of outstanding recv buffers is below a water mark and in a batched manner, thus simplifying and optimizing the data path. Use a pre-allocated ring of recv buffers instead of allocating from kmem cache. A special treatment is given to the login response buffer whose size must be 8K unlike the size of buffers used for any other purpose which is 128 bytes. Signed-off-by: NOr Gerlitz <ogerlitz@voltaire.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Or Gerlitz 提交于
We will make a major change in the recv buffer posting logic, after which the problem commit bba7ebba "avoid recv buffer exhaustion caused by unexpected PDUs" comes to solve doesn't exist any more, so revert it. Signed-off-by: NOr Gerlitz <ogerlitz@voltaire.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 14 3月, 2009 1 次提交
-
-
由 Mike Christie 提交于
There is no need to cap the queue depth in the modules. We set this in userspace and can do that there. For performance testing with ram based targets, this is helpful since we can have very high queue depths. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 22 12月, 2008 1 次提交
-
-
由 David Disseldorp 提交于
iSCSI/iSER targets may send PDUs without a prior request from the initiator. RFC 5046 refers to these PDUs as "unexpected". NOP-In PDUs with itt=RESERVED and Asynchronous Message PDUs occupy this category. The amount of active "unexpected" PDU's an iSER target may have at any time is governed by the MaxOutstandingUnexpectedPDUs key, which is not yet supported. Currently when an iSER target sends an "unexpected" PDU, the initiators recv buffer consumed by the PDU is not replaced. If over initial_post_recv_bufs_num "unexpected" PDUs are received then the receive queue will run out of receive work requests entirely. This patch ensures recv buffers consumed by "unexpected" PDUs are replaced in the next iser_post_receive_control() call. Signed-off-by: NDavid Disseldorp <ddiss@sgi.com> Signed-off-by: NKen Sandars <ksandars@sgi.com> Acked-by: NOr Gerlitz <ogerlitz@voltaire.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 15 7月, 2008 1 次提交
-
-
由 Roland Dreier 提交于
They don't get updated by git and so they're worse than useless. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 12 7月, 2008 6 次提交
-
-
由 Mike Christie 提交于
The recv lock was defined so the iscsi layer could block the recv path from processing IO during recovery. It turns out iser just set a lock to that pointer which was pointless. We now disconnect the transport connection before doing recovery so we do not need the recv lock. For iscsi_tcp we still stop the recv path incase older tools are being used. This patch also has iscsi_itt_to_ctask user grab the session lock and has the caller access the task with the lock or get a ref to it in case the target is broken and sends a tmf success response then sends data or a response for the command that was supposed to be affected bty the tmf. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
This hooks iser into the iscsi endpoint code. Previously it handled the lookup and allocation. This has been made generic so bnx2i and iser can share it. It also allows us to pass iser the leading conn's ep, so we know the ib_deivce being used and can set it as the scsi_host's parent. And that allows scsi-ml to set the dma_mask based on those values. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
This handles the iscsi_cmd_task rename and renames the iser cmd task to iser task. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
Convert ib_iser to support merged tasks. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
After the stop_conn callback has returned the LLD should not touch the scsi cmds. iscsi_tcp and libiscsi use the conn->recv_lock and suspend_rx field to halt recv path processing, but iser does not have any protection. This patch modifies iser so that userspace can just call the ep_disconnect callback, which will halt all recv IO, before calling the stop_conn callback so we do not have to worry about the conn->recv_lock and suspend rx field. iser just needs to stop the send side from accessing the ib conn. Fixup to handle when the ep poll fails and ep disconnect is called from Erez. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
max_cmd_len and max_conn are not really used. max_cmd_len is always 16 and can be set by the LLD. max_conn is always one since we do not support MCS. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 30 4月, 2008 1 次提交
-
-
由 Eli Dorfman 提交于
Add another level for debug. Signed-off-by: NEli Dorfman <elid@voltaire.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 18 7月, 2007 1 次提交
-
-
由 Roland Dreier 提交于
Make iser_conn_release() and iser_start_rdma_unaligned_sg() static, since they are only used in the .c file where they are defined. In addition to being a cleanup, this even shrinks the generated code by allowing the single call of iser_start_rdma_unaligned_sg() to be inlined into its callsite. On x86_64: add/remove: 0/1 grow/shrink: 1/0 up/down: 466/-533 (-67) function old new delta iser_reg_rdma_mem 1518 1984 +466 iser_start_rdma_unaligned_sg 533 - -533 Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 03 6月, 2007 1 次提交
-
-
由 Mike Christie 提交于
This patch allows us to set can_queue and cmds_per_lun from userspace when we create the session/host. From there we can set it on a per target basis. The patch fully converts iscsi_tcp, but only hooks up ib_iser for cmd_per_lun since it currently has a lots of preallocations based on can_queue. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 06 4月, 2007 1 次提交
-
-
由 Erez Zilber 提交于
When a connection is terminated asynchronously from the iSCSI layer's perspective, iSER needs to notify the iSCSI layer that the connection has failed. This is done using a workqueue (switched to from the iSER tasklet context). Meanwhile, the connection object (that holds the work struct) is released. If the workqueue function wasn't called yet, it will be called later with a NULL pointer, which will crash the kernel. The context switch (tasklet to workqueue) is not required, and everything can be done from the iSER tasklet. This eliminates the NULL work struct bug (and simplifies the code). Signed-off-by: NErez Zilber <erezz@voltaire.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 13 12月, 2006 1 次提交
-
-
由 Ralph Campbell 提交于
Convert iSER to use the new verbs DMA mapping functions for kernel verbs consumers. Signed-off-by: NRalph Campbell <ralph.campbell@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 30 11月, 2006 1 次提交
-
-
由 Roland Dreier 提交于
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 29 9月, 2006 2 次提交
-
-
由 Erez Zilber 提交于
iSER uses the DMA mapping api to map the page holding the SCSI command data to the HCA DMA address space. When the command data is not aligned for RDMA, the data is copied to/from an allocated buffer which in turn is used for executing this command. The pages associated with the command must be unmapped before being touched. Signed-off-by: NErez Zilber <erezz@voltaire.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Erez Zilber 提交于
iSER uses a data transaction object (struct iser_dto) as part of its IB data descriptors (struct iser_desc) management. It also uses a hierarchy of connection structures pointing to each other. A DTO may exist even after the iscsi_iser connection pointed by it is destroyed (eg one that is bound to a post receive buffer which was flushed by the IB HW). Hence DTOs need point to the lowest connection, which is struct iser_conn. Signed-off-by: NErez Zilber <erezz@voltaire.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 23 9月, 2006 2 次提交
-
-
由 Erez Zilber 提交于
Fast Memory Registration (fmr) is used to register for rdma an sg whose elements are not linearly sequential after dma mapping. The IB verbs layer provides an "all dma memory MR (memory region)" which can be used for RDMA-ing a dma linearly sequential buffer. Change the code to use the dma mr instead of doing fmr when dma mapping produces a single dma entry sg. Signed-off-by: NErez Zilber <erezz@voltaire.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Erez Zilber 提交于
As iser is able to use at most one rdma operation for the execution of a scsi command, and registration of the sg associated with scsi command has its restrictions, the code checks if an sg is "aligned for rdma". Alignment for rdma is measured in "fmr page" units whose possible resolutions are different between HCAs and can be smaller, equal or bigger to the system page size. When the system page size is bigger than 4KB (eg the default with ia64 kernels) there a bigger chance that an sg would be aligned for rdma if the fmr page size is 4KB. Change the code to create FMR whose pages are of size 4KB and to take that into account when processing the sg. Signed-off-by: NErez Zilber <erezz@voltaire.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 03 9月, 2006 1 次提交
-
-
由 Mike Christie 提交于
iSCSI RFC states that the first burst length must be smaller than the max burst length. We currently assume targets will be good, but that may not be the case, so this patch adds a check. This patch also moves the unsol data out offset to the lib so the LLDs do not have to track it. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 22 6月, 2006 1 次提交
-
-
由 Or Gerlitz 提交于
iSER (iSCSI Extensions for RDMA) transport provider driver for the iSCSI initiator, whose other parts (under drivers/scsi) are scsi_transport_iscsi - the transport management module, iscsi_tcp - the TCP transport provider module and libiscsi - a kernel library (module) implementing functionality needed by both TCP and iSER transports. iSER is both a provider of the iSCSI transport api and a SCSI low level driver. This file contains internal data structures and non static service functions. Signed-off-by: NOr Gerlitz <ogerlitz@voltaire.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-