s/matach/match

No functional changes
Signed-off-by: NFelipe Balbi <balbi@ti.com>

commit 3921426b (usb: dwc3: core: move
event buffer allocation out of
dwc3_core_init()) introduced a memory leak
of the coherent memory we use as event
buffers on dwc3 driver.

If the driver is compiled as a dynamically
loadable module and use constantly loads
and unloads the driver, we will continue
to leak the coherent memory allocated during
->probe() because dwc3_free_event_buffers()
is never called during ->remove().

Cc: <stable@vger.kernel.org> # v3.7 v3.8
Signed-off-by: NFelipe Balbi <balbi@ti.com>

This patch (as1649) reverts commit
55bcdce8 (USB: EHCI: remove ASS/PSS
polling timeout).  That commit was written under the assumption that
some controllers may take a very long time to turn off their async and
periodic schedules.  It now appears that in fact the schedules do get
turned off reasonably quickly, but some controllers occasionally leave
the schedules' status bits turned on and consequently ehci-hcd can't
tell that the schedules are off.

VIA controllers in particular have this problem.  ehci-hcd tells the
hardware to turn off the async schedule, the schedule does get turned
off, but the status bit remains on.  Since the EHCI spec requires that
the schedules not be re-enabled until the previous disable has taken
effect, with an unlimited timeout the async schedule never gets turned
back on.  The resulting symptom is that the system is unable to
communicate with USB devices.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: NRonald <ronald645@gmail.com>
Reported-and-tested-by: NPaul Hartman <paul.hartman@gmail.com>
Reported-and-tested-by: NDieter Nützel <dieter@nuetzel-hh.de>
Reported-and-tested-by: NJean Delvare <khali@linux-fr.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If one storage interface or usb network interface(iSCSI case) exists in
current configuration, memory allocation with GFP_KERNEL during
usb_device_reset() might trigger I/O transfer on the storage interface
itself and cause deadlock because the 'us->dev_mutex' is held in
.pre_reset() and the storage interface can't do I/O transfer when the
reset is triggered by other interface, or the error handling can't be
completed if the reset is triggered by the storage itself (error
handling path).
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Decotigny <david.decotigny@google.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Oliver Neukum <oneukum@suse.de>
Reviewed-by: NJiri Kosina <jkosina@suse.cz>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This reverts commit d57ada0c.

All of these are wrong and need to be reverted for now.

Cc: Manjunath Goudar <manjunath.goudar@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tony Prisk <linux@prisktech.co.nz>
Cc: Alexey Charkov <alchark@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 6ed3c43d.

All of these are wrong, and need to be reverted for now.

Cc: Manjunath Goudar <manjunath.goudar@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit e2ced166.

All of these are wrong, and need to be removed for now until they can
get reworked properly.

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The static lock initializers want to be fed the proper name of the
lock and not some random string. In mainline random strings are
obfuscating the readability of debug output, but for RT they prevent
the spinlock substitution. Fix it up.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The recent patches from Manjunath Goudar introduced two small
mistakes in the Kconfig help text for the new options. Let's
fix those and the other entries that have become stale over time.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

With the multiplatform changes in arm-soc tree, it becomes
possible to enable the mvebu platform (which uses
ehci-orion) at the same time as other platforms that require
a conflicting EHCI bus glue. At the moment, this results
in a warning like

drivers/usb/host/ehci-hcd.c:1297:0: warning: "PLATFORM_DRIVER" redefined [enabled by default]
drivers/usb/host/ehci-hcd.c:1277:0: note: this is the location of the previous definition
drivers/usb/host/ehci-orion.c:334:31: warning: 'ehci_orion_driver' defined but not used [-Wunused-variable]

and an ehci driver that only works on one of them.

With the infrastructure added by Alan Stern in patch 3e023203
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the orion bus glue.
Signed-off-by: NManjunath Goudar <manjunath.goudar@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

With the multiplatform changes in arm-soc tree, it becomes
possible to enable the vt8500 platform at the same time
as other platforms that require a conflicting EHCI bus
glue. At the moment, this results in a warning like

drivers/usb/host/ehci-hcd.c:1277:0: warning: "PLATFORM_DRIVER" redefined [enabled by default]
drivers/usb/host/ehci-hcd.c:1257:0: note: this is the location of the previous definition
drivers/usb/host/ehci-omap.c:319:31: warning: 'ehci_hcd_omap_driver' defined but not used [-Wunused-variable]

and an ehci driver that only works on one of them.

With the infrastructure added by Alan Stern in patch 3e023203
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the vt8500 bus glue.
Signed-off-by: NManjunath Goudar <manjunath.goudar@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NTony Prisk <linux@prisktech.co.nz>
Cc: Alexey Charkov <alchark@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The current entry in unusual_cypress.h for the Super TOP SATA bridge devices
seems to be causing corruption on newer revisions of this device.  This has
been reported in Arch Linux and Fedora.  The original patch was tested on
devices with bcdDevice of 1.60, whereas the newer devices report bcdDevice
as 2.20.  Limit the UNUSUAL_DEV entry to devices less than 2.20.

This fixes https://bugzilla.redhat.com/show_bug.cgi?id=909591

The Arch Forum post on this is here:
	https://bbs.archlinux.org/viewtopic.php?id=152011Reported-by: NCarsten S. <carsteniq@yahoo.com>
Tested-by: NCarsten S. <carsteniq@yahoo.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NJosh Boyer <jwboyer@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The module alias should be "ehci-omap" and not
"omap-ehci" to match the platform device name.
The omap-ehci module should now autoload correctly.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not request any gpios so don't free them.
Fixes L3 bus error on multiple modprobe/rmmod of ehci_hcd
with ehci-omap in use.

Without this patch, EHCI will break on repeated insmod/rmmod
of ehci_hcd for all OMAP2+ platforms that use EHCI and
set 'phy_reset = true' in usbhs_omap_board_data.
i.e.

board-3430sdp.c:	.phy_reset  = true,
board-3630sdp.c:	.phy_reset  = true,
board-am3517crane.c:	.phy_reset  = true,
board-am3517evm.c:	.phy_reset  = true,
board-cm-t3517.c:	.phy_reset  = true,
board-cm-t35.c:	.phy_reset  = true,
board-devkit8000.c:	.phy_reset  = true,
board-igep0020.c:	.phy_reset = true,
board-igep0020.c:	.phy_reset = true,
board-omap3beagle.c:	.phy_reset  = true,
board-omap3evm.c:	.phy_reset  = true,
board-omap3pandora.c:	.phy_reset  = true,
board-omap3stalker.c:	.phy_reset = true,
board-omap3touchbook.c:	.phy_reset  = true,
board-omap4panda.c:	.phy_reset  = false,
board-overo.c:	.phy_reset  = true,
board-zoom.c:	.phy_reset		= true,

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The USB device descriptor of one identity presented by a few
Huawei morphing devices have serial functions with class codes
02/02/ff, indicating CDC ACM with a vendor specific protocol. This
combination is often used for MSFT RNDIS functions, and the CDC
ACM class driver will therefore ignore such functions.

The CDC ACM class driver cannot support functions with only 2
endpoints.  The underlying serial functions of these modems are
also believed to be the same as for alternate device identities
already supported by the option driver. Letting the same driver
handle these functions independently of the current identity
ensures consistent handling and user experience.

There is no need to blacklist these devices in the rndis_host
driver. Huawei serial functions will either have only 2 endpoints
or a CDC ACM functional descriptor with bmCapabilities != 0, making
them correctly ignored as "non RNDIS" by that driver.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Make sure serial-driver dtr_rts is called with disc_mutex held after
checking the disconnected flag.

Due to a bug in the tty layer, dtr_rts may get called after a device has
been disconnected and the tty-device unregistered. Some drivers have had
individual checks for disconnect to make sure the disconnected interface
was not accessed, but this should really be handled in usb-serial core
(at least until the long-standing tty-bug has been fixed).

Note that the problem has been made more acute with commit 0998d063
("device-core: Ensure drvdata = NULL when no driver is bound") as the
port data is now also NULL when dtr_rts is called resulting in further
oopses.
Reported-by: NChris Ruehl <chris.ruehl@gtsys.com.hk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Interface layout:

 00 CD-ROM
 01 debug COM port
 02 AP control port
 03 modem
 04 usb-ethernet

Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0408 ProdID=ea42 Rev= 0.00
S:  Manufacturer=Qualcomm, Incorporated
S:  Product=Qualcomm CDMA Technologies MSM
S:  SerialNumber=353568051xxxxxx
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=84(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=86(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Let's have a single platform data structure for the OMAP's High-Speed
USB host subsystem instead of having 3 separate ones i.e. one for
board data, one for USB Host (UHH) module and one for USB-TLL module.

This makes the code much simpler and avoids creating multiple copies of
platform data.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
For the ehci-omap.c part:
Acked-by: NAlan Stern <stern@rowland.harvard.edu>

Add a couple of missing GENERIC_HARDIRQS dependencies to fix link
errors like below on s390:

ERROR: "devm_request_threaded_irq" [drivers/usb/gadget/mv_udc.ko] undefined!
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

1. The idProduct is little endian, so make sure its value to be
compatible with the current CPU. Make no break on big endian processors.
Signed-off-by: Nfangxiaozhi <huananhu@huawei.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

that driver hasn't been maintained for quite
some time, at least since e0830004 (ARM:
imx: dynamically allocate imx_udc device).

Because of that, and because driver doesn't
even compile with allyesconfig and allmodconfig,
we're making it depend on BROKEN.
Reported-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

1) It didn't free xfer->seg[0] so there was a leak.
2) xfer->seg[cnt] can be NULL.
3) Use usb_free_urb() for ->dto_urb instead of kfree().
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

  for NUL terminated string, better notice '\0' in the end.
Signed-off-by: NChen Gang <gang.chen@asianux.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

  for NUL terminated string, better notice '\0' in the end.
Signed-off-by: NChen Gang <gang.chen@asianux.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

1. Optimize the match rules with new macro for Huawei USB storage devices,
   to avoid to load USB storage driver for the modem interface
   with Huawei devices.
2. Add to support new switch command for new Huawei USB dongles.
Signed-off-by: Nfangxiaozhi <huananhu@huawei.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

1. Define a new macro for USB storage match rules:
    matching with Vendor ID and interface descriptors.
Signed-off-by: Nfangxiaozhi <huananhu@huawei.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add support for Zolix Omni 1509 monochromator custom USB-RS232 converter.
Signed-off-by: NPetr Kubánek <petr@kubanek.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

New device with 3 serial interfaces:

 If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend) Sub=ff Prot=ff
 If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend) Sub=ff Prot=ff
 If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend) Sub=ff Prot=ff
 If#= 3 Alt= 0 #EPs= 2 Cls=08(stor) Sub=06 Prot=50

Cc: <stable@vger.kernel.org>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add PID/VID entries for ELV WS 300 PC II weather station
Signed-off-by: NSven Killig <sven@killig.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This adds support for the OWL CM-160 electricity monitor to the cp210x
driver.
Signed-off-by: NLuis Llorente <luisllorente@luisllorente.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch (as1654) fixes a very old bug in ehci-hcd, connected with
scheduling of periodic split transfers.  The calculations for
full/low-speed bus usage are all carried out after the correction for
bit-stuffing has been applied, but the values in the max_tt_usecs
array assume it hasn't been.  The array should allow for allocation of
up to 90% of the bus capacity, which is 900 us, not 780 us.

The symptom caused by this bug is that any isochronous transfer to a
full-speed device with a maxpacket size larger than about 980 bytes is
always rejected with a -ENOSPC error.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch (as1653) fixes a bug in ehci-hcd.  Unlike iTD entries, an
siTD entry in the periodic schedule may not complete until the frame
after the one it belongs to.  Consequently, when scanning the periodic
schedule it is necessary to start with the frame _preceding_ the one
where the previous scan ended.

Not doing this properly can result in memory leaks and failures to
complete isochronous URBs.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Reported-by: NAndy Leiserson <andy@leiserson.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch (as1656) adds a module parameter to the net2280 UDC driver
to force full-speed operation.  It is intended for testing purposes,
where one wants to check how well a full-speed device performs when
attached to a high-speed bus.  Without this parameter it would be
necessary to interpose a full-speed hub; otherwise the net2280 would
connect at high speed.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The usbtest driver includes some rather simple-minded logic for
selecting an altsetting to test.  It doesn't work well for the g_zero
gadget, because it selects altsetting 0 (which doesn't have
isochronous endpoints) rather than altsetting 1 (which does have them,
if the gadget's hardware supports them).  This prevents usbtest's
isochronous tests (15, 16, 22, and 23) from working with g_zero.

Since g_zero is one of the most common gadget drivers used for USB
testing, usbtest should do a better job of supporting it.  But since
some programs may rely on the current scheme for selecting
altsettings, I didn't want to change it.

Instead, this patch (as1655) adds a module parameter to usbtest, which
can be used to override the default altsetting.  Since usbtest is
never used by normal users (most distributions probably don't even
build it), the new module parameter won't inconvenience anybody.  In
any case, it is entirely optional -- leaving it unset preserves the
existing behavior.

The patch also fixes a related bug in usbtest: After selecting an
altsetting, the driver neglects to store its selection.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add PID and special handling for Telit LE920
Signed-off-by: NDaniele Palmas <dnlplm@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add VID and PID for Telit Gobi QDL device
Signed-off-by: NDaniele Palmas <dnlplm@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the following sparse warning:

drivers/usb/chipidea/ci13xxx_imx.h:22:25: error: dubious one-bit signed bitfield
drivers/usb/chipidea/ci13xxx_imx.h:22:25: error: dubious one-bit signed bitfield
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix two problems detected by the sparse code analyser:

|drivers/usb/host/isp1760-hcd.c:935:6: warning: symbol 'schedule_ptds' was not declared. Should it be static?
|drivers/usb/host/isp1760-hcd.c:1288:6: warning: symbol 'errata2_function' was not declared. Should it be static?
Signed-off-by: NArvid Brodin <arvid.brodin@xdin.com>
Signed-off-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Recent commits introduced the following
Kconfig warning:

warning: (USB_MUSB_HDRC && OMAP_USB3) selects \
	OMAP_CONTROL_USB which has unmet direct \
	dependencies (USB_SUPPORT && ARCH_OMAP2PLUS)

This patch just fixes it, by removing the
unnecessary OMAP dependency.
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>