- 24 2月, 2016 3 次提交
-
-
由 Sumit Saxena 提交于
Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Sumit Saxena 提交于
This patch will do proper error handling for DCMD timeout failure cases for Fusion adapters: 1. For MFI adapters, in case of DCMD timeout (DCMD which must return SUCCESS) driver will call kill adapter. 2. What action needs to be taken in case of DCMD timeout is decided by function dcmd_timeout_ocr_possible(). DCMD timeout causing OCR is applicable to the following commands: MR_DCMD_PD_LIST_QUERY MR_DCMD_LD_GET_LIST MR_DCMD_LD_LIST_QUERY MR_DCMD_CTRL_SET_CRASH_DUMP_PARAMS MR_DCMD_SYSTEM_PD_MAP_GET_INFO MR_DCMD_LD_MAP_GET_INFO 3. If DCMD fails from driver init path there are certain DCMDs which must return SUCCESS. If those DCMDs fail, driver bails out. For optional DCMDs like pd_info etc., driver continues without executing certain functionality. Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Sumit Saxena 提交于
This patch will do synhronization between OCR function and AEN function using "reset_mutex" lock. reset_mutex will be acquired only in the first half of the AEN function which issues a DCMD. Second half of the function which calls SCSI API (scsi_add_device/scsi_remove_device) should be out of reset_mutex to avoid deadlock between scsi_eh thread and driver. During chip reset (inside OCR function), there should not be any PCI access and AEN function (which is called in delayed context) may be firing DCMDs (doing PCI writes) when chip reset is happening in parallel which will cause FW fault. This patch will solve the problem by making AEN thread and OCR thread mutually exclusive. Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 09 1月, 2016 1 次提交
-
-
由 Nicholas Krause 提交于
This adds the needed check after the call to the function mraid_mm_alloc_kioc in order to make sure that this function has not returned NULL and therefore makes sure we do not deference a NULL pointer if one is returned by mraid_mm_alloc_kioc. Further more add needed comments explaining that this function call can return NULL if the list head is empty for the pointer passed in order to allow furture users to understand this required pointer check. Signed-off-by: NNicholas Krause <xerofoify@gmail.com> Acked-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 10 11月, 2015 3 次提交
-
-
由 Christoph Hellwig 提交于
This patch changes the !blk-mq path to the same defaults as the blk-mq I/O path by always enabling block tagging, and always using host wide tags. We've had blk-mq available for a few releases so bugs with this mode should have been ironed out, and this ensures we get better coverage of over tagging setup over different configs. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NJens Axboe <axboe@kernel.dk> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
由 Sumit Saxena 提交于
Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Sumit Saxena 提交于
The DELL PERC5 controller firmware does not list tape drives in response to MR_DCMD_PD_LIST_QUERY. This causes tape drives not be exposed to the OS when connected to a PERC5 controller. This patch permits detection of tape drives connected to a PERC5 controller by exposing non-TYPE_DISK devices unconditionally. Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 03 11月, 2015 3 次提交
-
-
Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
This is an issue on SMAP enabled CPUs and 32 bit apps running on 64 bit OS. Do not access user memory from kernel code. The SMAP bit restricts accessing user memory from kernel code. Cc: <stable@vger.kernel.org> Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 29 10月, 2015 19 次提交
-
-
Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
It may happen (kdump), that an interrupt is invoked just after the setup_irqs function was called but before the tasklet was initialised. At this phase the hw ints should have been disabled, but for unknown reason this mechanism seems to not work properly. From: Tomas Henzl <thenzl@redhat.com> Signed-off-by: NTomas Henzl <thenzl@redhat.com> Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
Do not use PAGE_SIZE marco to calculate max_sectors per I/O request. Driver code assumes PAGE_SIZE will be always 4096 which can lead to wrongly calculated value if PAGE_SIZE is not 4096. This issue was reported in Ubuntu Bugzilla Bug #1475166. Cc: <stable@vger.kernel.org> Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
Remove PCI id based checks and use instance->ctrl_context to decide whether controller is MFI-based or a Fusion adapter. Additionally, Fusion adapters are divided into two categories: Thunderbolt and Invader. Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
Expose non-disk (TAPE drive, CD-ROM) unconditionally. Cc: <stable@vger.kernel.org> Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
Some of these code changes were proposed by David Binderman. Removed redudant check of requestorId. Redundant condition: instance.requestorId. Check for plasma firmware 1.11 are now restructured to support only specific device id. Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
Syncro firmware supports round robin I/O switching on dual path. Driver uses validHandles to check for dual path. However, it is supposed to check for values > 1 (not > 2). Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
Print firmware events in human-readable form. This will help users track any critical firmware events without special application support. Sample syslogd output: megaraid_sas 0000:02:00.0: 8619 (491648347s/0x0020/WARN) - Controller temperature threshold exceeded. This may indicate inadequate system cooling. Switching to low performance mode. The format of logged events is: "<pci_dev_id>: <sequence_number> (<timestamp>/<locale>/<class>) - <description>" Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
Fix the issue reported at: http://marc.info/?l=linux-scsi&m=143694494104544&w=2 Try to do chip reset at driver load time. If firmware fails to reach ready state, try chip reset using adp_reset() callback. For Fusion adapters the call back was previously void. Provide a suitable reset function. Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
Driver will expose max sge = 256 (earlier it was 64) if firmware supports extended IO size (1M). Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: NMartin Petersen <martin.petersen@oracle.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: NMartin Petersen <martin.petersen@oracle.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: NMartin Petersen <martin.petersen@oracle.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: NMartin Petersen <martin.petersen@oracle.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: NMartin Petersen <martin.petersen@oracle.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 26 8月, 2015 2 次提交
-
-
由 Bjorn Helgaas 提交于
Fix whitespace and indentation errors. No code change. [jejb: checkpatch fixes] Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Reviewed-by: NHannes Reinecke <hare@suse.de> Acked-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
由 Bjorn Helgaas 提交于
Use dev_printk() when possible to make messages more useful. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Reviewed-by: NHannes Reinecke <hare@suse.de> Acked-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
- 15 6月, 2015 1 次提交
-
-
由 Suthikulpanit, Suravee 提交于
Signed-off-by: NSuravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Kashyap Desai <kashyap.desai@avagotech.com> Cc: Sumit Saxena <sumit.saxena@avagotech.com> Cc: Uday Lingala <uday.lingala@avagotech.com> Acked-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 13 6月, 2015 1 次提交
-
-
由 Tomas Henzl 提交于
This fixes a regression caused by commit d3557fc8 megaraid_sas : Add separate function for setting up IRQs This makes boot end with 'root does not exist' message on certain adapters. The bug is that the driver does not setup ints for cards without msi-x support. This patch fixes it, in addition to that it moves tasklet initialisation before enable_intr, otherwise a kernel panic may occur, when an interrupt arrives before the tasklet is ready. Signed-off-by: NTomas Henzl <thenzl@redhat.com> Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
- 01 6月, 2015 1 次提交
-
-
megaraid_sas : Modify return value of megasas_issue_blocked_cmd() and wait_and_poll() to consider command status returned by firmware This patch is rebased on top of recently sent 18 patches(submitted by me) for megaraid_sas driver. Change the return value of wait_and_poll() and megsas_issue_blocked_cmd() based on MFI_STAT returned by firmware for that command. Earlier driver always send return type based on command completion (but never check MFI_STAT_OK for that command), so even if command is failed by firmware still driver will return SUCCESS status from these functions wait_and_poll() and megsas_issue_blocked_cmd() and if caller of these functions does not check command status (MFI_STAT), then it may endup using invalid data returned in DMA buffers(one of the example is megasas_ld_list_query DCMD). Best thing to avoid this type of issue is do error handling and set proper return type from caller function wait_and_poll() and megsas_issue_blocked_cmd(). The change proposed in this patch will fix the regression introduced in patch- "90dc9d98 megaraid_sas : MFI MPT linked list corruption fix" inside function megasas_ld_list_query(). Prior to this MFI MPT linked list corruption fix patch, megasas_ld_list_query() function used to check DCMD status(returned by firmware) but with this linked list corruption fix patch, DCMD status will not be checked inside function megasas_ld_list_query() and introduced this issue of wrong data being used by function megasas_ld_list_query(). Cc: <stable@vger.kernel.org> Signed-off-by: NKashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
- 26 5月, 2015 1 次提交
-
-
由 Geert Uytterhoeven 提交于
Fix typo in kerneldoc identifier. Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: NSumit Saxena <sumit.saxena@lsi.com> Cc: James E.J. Bottomley <JBottomley@parallels.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 25 5月, 2015 5 次提交
-
-
由 Christoph Hellwig 提交于
Swap the whole 32 bits we read from the hardware instead of swapping just the 16bits we care about in place later. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: NHannes Reinecke <hare@suse.de> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
由 Christoph Hellwig 提交于
The fusion HBAs don't really use the instance template like the other variants, as it branches off at a much higher level. So instead of trying to squeeze megasas_fire_cmd_fusion into the wrong calling convention call it locally with argument data types that match what is passed. [jejb: fix up 32 bit compile failure] Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: NHannes Reinecke <hare@suse.de> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: NHannes Reinecke <hare@suse.de> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: NHannes Reinecke <hare@suse.de> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
由 Christoph Hellwig 提交于
Converting structure fields in place is always a bad idea, and in this case by moving it into the only caller we also only have to do a single byte swap as most fields of this structure are never used. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NSumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: NHannes Reinecke <hare@suse.de> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-