- 19 5月, 2010 1 次提交
-
-
由 Alex Deucher 提交于
Some LVDS connectors don't have a ddc bus, so reset the ddc bus to invalid before parsing the next connector to avoid using stale ddc bus data. Should fix fdo bug 28164. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 18 5月, 2010 6 次提交
-
-
由 Alex Deucher 提交于
The lowest power states often cause display problems, so only enable them when all displays are off. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
- remove non_clock_info struct - track power state misc flags Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Hook the atom table parsing up to module loading, so we can automatically load the appropriate hwmon drivers. Based on initial patch for r6xx from Matthew Garrett Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
This also simplifies the code and enables reclocking with multiple heads active by tracking whether the power states are single or multi-head capable. Eventually, we will want to select a power state based on external factors (AC/DC state, user selection, etc.). (v2) Update for evergreen Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
On pre-r6xx, the power mode array is usually ordered: low ... high default On r6xx+: default low ... high Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Fixes LVDS issues on some laptops; notably laptops with 2048x1536 panels. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 28 4月, 2010 1 次提交
-
-
由 Dan Carpenter 提交于
This change makes the array larger, "MAX_SUPPORTED_TV_TIMING_V1_2" is 3 and the original size "MAX_SUPPORTED_TV_TIMING" is 2. Also there were checks that were off by one. Signed-off-by: NDan Carpenter <error27@gmail.com> Acked-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 09 4月, 2010 1 次提交
-
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 06 4月, 2010 1 次提交
-
-
由 Alex Deucher 提交于
The GPIO_I2C_INFO table does not always have ATOM_MAX_SUPPORTED_DEVICE entries. Limit the number of indices to the size of the table. Should fix Novell bug 589022. v2: fix typo Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: Stable <stable@kernel.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 31 3月, 2010 5 次提交
-
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Check that atom cmd and data tables are valid before using them. (v2) - fix some whitespace errors noticed by Rafał Miłecki - check a few more cases Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
- no longer needed with the latest new pll algo fixes. - also don't use lcd pll limits. They don't seem to work well for all systems. If we have a case where they are useful, we can set the flag for that case. fixes fdo bug 27083 Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Look up i2c bus in the power table and expose it. You'll need to load a hwmon driver for any chips on the bus, this patch just exposes the bus. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
-
- 15 3月, 2010 1 次提交
-
-
由 Alex Deucher 提交于
The bios has alternate pll output limits for LCD panels. If available, use these for pll divider calculations. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 25 2月, 2010 1 次提交
-
-
由 Alex Deucher 提交于
- add support for pre-avivo chips - add support for fixed post/ref dividers - add support for non-fractional fb dividers By default avivo chips use the new algo and pre-avivo chips use the old algo. Use the "new_pll" module option to toggle between them. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 23 2月, 2010 1 次提交
-
-
由 Rafał Miłecki 提交于
We kept pointers to requested and current clock modes in every power state. That was useless, more /global/ pointers in power struct are enough. Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Reviewed-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 20 2月, 2010 1 次提交
-
-
由 Alex Deucher 提交于
rs600 board lists DVI port as HDMI. Fixes fdo bug 26605 Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 18 2月, 2010 2 次提交
-
-
由 Alex Deucher 提交于
fixes fdo bug 26358 Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Rafał Miłecki 提交于
Fixes fdo bug #26329 Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Tested-by: NTobias Jakobi <liquid.acid@gmx.net> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 09 2月, 2010 8 次提交
-
-
由 Alex Deucher 提交于
This adds initial Evergreen KMS support, it doesn't include any acceleration features or interrupt handling yet. Major changes are DCE4 handling for PLLs for the > 2 crtcs. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
- only r4xx/r5xx/rs6xx/rs740 have clock gating atom table, so disable it on r6xx. it's already disabled on r7xx - check to make sure the clock_gating hook exists before calling it. This avoids a segfault on asics without that function. - remove unused static power management function. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
The idea is to flag a power state with a certain type and use that type to decide on what state to select. On r6xx+, we select a state and then transition between clock modes in that state. On pre-r6xx, we transition between states directly. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Rafał Miłecki 提交于
Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
The general idea is to validate the current hw state against the set of power states and select a power state based on that. This patch just pulls the power states from the bios and prints the information. It is not currently hooked up in the actual power management code. Hooking it up will require reworking the the current power state selection code and will be handled in a future patch. Additionally, we'd need to decide on some default lower power states for cards without power tables. v2 - increment state_index after checking for default state v3 - fix typo in pm init on pre-atom cards, handle pre-atom cards without x86 bioses Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
The panel on the Toshiba A300-1BU laptop does not like the PLL dividers selected by the avivo pll algo, but works fine using the older method. Add a quirk to handle it. Should fix fdo bug 26358. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
-
由 Alex Deucher 提交于
Rework the pll algo selection so that the pll algo in use can be selected more easily. This allows us to select different pll divider selection algos for specific monitors that work better with one algo or the other. This is needed for the next patch which adds an LVDS pll quirk for a specific notebook. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Reported on irc by nirbheek. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 08 1月, 2010 2 次提交
-
-
由 Alex Deucher 提交于
This detects if the sideport memory is enabled and if it is VRAM is evicted on suspend/resume. This should fix s/r issues on some IGPs. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
This is displayport used for internal connections such as laptop panels and systems with integrated monitors. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 06 1月, 2010 1 次提交
-
-
由 Alex Deucher 提交于
Should fix fdo bug 25741 Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 23 12月, 2009 2 次提交
-
-
由 Alex Deucher 提交于
When linking multiple encoders to a connector, make sure to not link LVDS with another connector. Some bioses have the same i2c line for LVDS and VGA. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
we were just using 1 before. reported on irc by soreau Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 10 12月, 2009 1 次提交
-
-
由 Alex Deucher 提交于
Supported on all AVIVO-based asics. Can be disabled via the new_pll module parameter: new_pll=0 - disable new_pll=1 - enable enabled by default [airlied: fixed to use do_div] Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
- 09 12月, 2009 2 次提交
-
-
由 Alex Deucher 提交于
Entries in the i2c table aren't always ordered by id. This allows us to remove some quirks that are no longer needed. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
entries in the ss table aren't always ordered by id. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 08 12月, 2009 3 次提交
-
-
由 Alex Deucher 提交于
This populates the connectors with HPD (Hot Plug Detect) information. This will be used in subsequent patches for automatic digital monitor connect/disconnect handling. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
- keep the atom i2c id in the i2c rec - fix gpio regs for GPIO and MDGPIO on pre-avivo chips - track whether the i2c line is hw capable - track whether the i2c line uses the multimedia i2c block Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
This is enough to retrieve EDID and DPCP. Signed-off-by: NDave Airlie <airlied@redhat.com>
-