- 23 11月, 2009 2 次提交
-
-
由 Jan Kara 提交于
When an error happened in ext4_splice_branch we failed to notice that in ext4_ind_get_blocks and mapped the buffer anyway. Fix the problem by checking for error properly. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
由 Theodore Ts'o 提交于
We don't to issue an I/O barrier on an error or if we force commit because we are doing data journaling. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: Jan Kara <jack@suse.cz> Cc: stable@kernel.org
-
- 16 11月, 2009 1 次提交
-
-
由 Theodore Ts'o 提交于
The block validity checks used by ext4_data_block_valid() wasn't correctly written to check file systems with the meta_bg feature. Fix this. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
- 23 11月, 2009 2 次提交
-
-
由 Theodore Ts'o 提交于
The number of old-style block group descriptor blocks is s_meta_first_bg when the meta_bg feature flag is set. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
由 Theodore Ts'o 提交于
commit a71ce8c6 updated ext4_statfs() to update the on-disk superblock counters, but modified this buffer directly without any journaling of the change. This is one of the accesses that was causing the crc errors in journal replay as seen in kernel.org bugzilla #14354. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
- 16 11月, 2009 2 次提交
-
-
由 Eric Sandeen 提交于
ext4_xattr_set_handle() was zeroing out an inode outside of journaling constraints; this is one of the accesses that was causing the crc errors in journal replay as seen in kernel.org bugzilla #14354. Reviewed-by: NAndreas Dilger <adilger@sun.com> Signed-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
由 Julia Lawall 提交于
We need to be testing the i_flags field in the ext4 specific portion of the inode, instead of the (confusingly aliased) i_flags field in the generic struct inode. Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
- 23 11月, 2009 3 次提交
-
-
由 Theodore Ts'o 提交于
When an inode gets unlinked, the functions ext4_clear_blocks() and ext4_remove_blocks() call ext4_forget() for all the buffer heads corresponding to the deleted inode's data blocks. If the inode is a directory or a symlink, the is_metadata parameter must be non-zero so ext4_forget() will revoke them via jbd2_journal_revoke(). Otherwise, if these blocks are reused for a data file, and the system crashes before a journal checkpoint, the journal replay could end up corrupting these data blocks. Thanks to Curt Wohlgemuth for pointing out potential problems in this area. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
由 Theodore Ts'o 提交于
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
Now that we are checking for failed journal checksums in the jbd2 layer, we don't need to check in the ext4 mount path --- since a checksum fail will result in ext4_load_journal() returning an error, causing the file system to refuse to be mounted until e2fsck can deal with the problem. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 16 11月, 2009 1 次提交
-
-
由 Theodore Ts'o 提交于
If there is a failed journal checksum, don't reset the journal. This allows for userspace programs to decide how to recover from this situation. It may be that ignoring the journal checksum failure might be a better way of recovering the file system. Once we add per-block checksums, we can definitely do better. Until then, a system administrator can try backing up the file system image (or taking a snapshot) and and trying to determine experimentally whether ignoring the checksum failure or aborting the journal replay results in less data loss. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
- 14 11月, 2009 1 次提交
-
-
由 Theodore Ts'o 提交于
One of the invalid error paths in ext4_iget() forgot to brelse() the inode buffer head. Fix it by adding a brelse() in the common error return path, which also simplifies function. Thanks to Andi Kleen <ak@linux.intel.com> reporting the problem. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 23 11月, 2009 6 次提交
-
-
由 Akira Fujita 提交于
Fix a few spelling typos in move_extent.c Signed-off-by: NAkira Fujita <a-fujita@rs.jp.nec.co.jp> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Akira Fujita 提交于
If CONFIG_PROVE_LOCKING is enabled, the double_down_write_data_sem() will trigger a false-positive warning of a recursive lock. Since we take i_data_sem for the two inodes ordered by their inode numbers, this isn't a problem. Use of down_write_nested() will notify the lock dependency checker machinery that there is no problem here. This problem was reported by Brian Rogers: http://marc.info/?l=linux-ext4&m=125115356928011&w=1Reported-by: NBrian Rogers <brian@xyzw.org> Signed-off-by: NAkira Fujita <a-fujita@rs.jp.nec.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Akira Fujita 提交于
ext4_move_extents() checks the logical block contiguousness of original file with ext4_find_extent() and mext_next_extent(). Therefore the extent which ext4_ext_path structure indicates must not be changed between above functions. But in current implementation, there is no i_data_sem protection between ext4_ext_find_extent() and mext_next_extent(). So the extent which ext4_ext_path structure indicates may be overwritten by delalloc. As a result, ext4_move_extents() will exchange wrong blocks between original and donor files. I change the place where acquire/release i_data_sem to solve this problem. Moreover, I changed move_extent_per_page() to start transaction first, and then acquire i_data_sem. Without this change, there is a possibility of the deadlock between mmap() and ext4_move_extents(): * NOTE: "A", "B" and "C" mean different processes A-1: ext4_ext_move_extents() acquires i_data_sem of two inodes. B: do_page_fault() starts the transaction (T), and then tries to acquire i_data_sem. But process "A" is already holding it, so it is kept waiting. C: While "A" and "B" running, kjournald2 tries to commit transaction (T) but it is under updating, so kjournald2 waits for it. A-2: Call ext4_journal_start with holding i_data_sem, but transaction (T) is locked. Signed-off-by: NAkira Fujita <a-fujita@rs.jp.nec.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Akira Fujita 提交于
If the EXT4_IOC_MOVE_EXT ioctl fails, the number of blocks that were exchanged before the failure should be returned to the userspace caller. Unfortunately, currently if the block size is not the same as the page size, the returned block count that is returned is the page-aligned block count instead of the actual block count. This commit addresses this bug. Signed-off-by: NAkira Fujita <a-fujita@rs.jp.nec.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
If s_log_groups_per_flex is greater than 31, then groups_per_flex will will overflow and cause a divide by zero error. This can cause kernel BUG if such a file system is mounted. Thanks to Nageswara R Sastry for analyzing the failure and providing an initial patch. http://bugzilla.kernel.org/show_bug.cgi?id=14287Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
由 Theodore Ts'o 提交于
Previously add_dirent_to_buf() did not free its passed-in buffer head in the case of ENOSPC, since in some cases the caller still needed it. However, this led to potential buffer head leaks since not all callers dealt with this correctly. Fix this by making simplifying the freeing convention; now add_dirent_to_buf() *never* frees the passed-in buffer head, and leaves that to the responsibility of its caller. This makes things cleaner and easier to prove that the code is neither leaking buffer heads or calling brelse() one time too many. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: Curt Wohlgemuth <curtw@google.com> Cc: stable@kernel.org
-
- 13 11月, 2009 2 次提交
-
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap3: Decrease cpufreq transition latency omap3: update Pandora defconfig omap3: 3430sdp: Enable Linux Regulator framework omap3: beagle: Fix USB host port power control omap3: pandora: Fix keypad keymap omap1: Amstrad Delta defconfig fixes omap: Fix omapfb/lcdc on OMAP1510 broken when PM set omap: Use resource_size omap: Fix race condition in omap dma driver
-
- 12 11月, 2009 20 次提交
-
-
由 Mike Hommey 提交于
Because of an integer overflow on start_blk, various kind of wrong results would be returned by the generic_block_fiemap() handler, such as no extents when there is a 4GB+ hole at the beginning of the file, or wrong fe_logical when an extent starts after the first 4GB. Signed-off-by: NMike Hommey <mh@glandium.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Eric Sandeen <sandeen@sgi.com> Cc: Josef Bacik <jbacik@redhat.com> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rodolfo Giometti 提交于
PPS events must be recorded according to PPS's mode settings. If a process asks for (i.e.) capture-assert events only, when the PPS client calls the pps_event() function to save the current PPS event, we should verify the event type and then discard unwanted ones. Also, without this patch userland processes waiting for a specific PPS event (assert or clear but not both) may be awakened at wrong time. Signed-off-by: NRodolfo Giometti <giometti@linux.it> Tested-by: NWilliam S. Brasher <billb958@door.net> Tested-by: NReg Clemens <clemens@dwf.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rodolfo Giometti 提交于
Userland programs may read/write PPS parameters at same time and these operations may corrupt PPS data. Signed-off-by: NRodolfo Giometti <giometti@linux.it> Tested-by: NReg Clemens <clemens@dwf.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pavel Machek 提交于
TASK_INTERRUPTIBLE and friends are now only available after including <linux/sched.h>, so include it when needed. bus_id is no longer available/necessary, so remove that. Android pmem driver is not available in mainline, so remove its hooks from drivers/video. Signed-off-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sergei Shtylyov 提交于
In case of failure, device_create() returns not NULL but the error code. The current code checks for non-NULL though which causes kernel oops in sysfs_create_group() when device_create() fails. Check for error using IS_ERR() and propagate the error value using PTR_ERR() instead of fixed -ENODEV code returned now... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Scott Valentine 提交于
v3020_mmio_read_bit() always returns 0 when left_shift > 7. v3020_mmio_read_bit()'s return type is (unsigned char). The code returns a value masked by (1 << left_shift) that is casted to the return type. If left_shift is larger than 7, the cast will always result in a 0 return value. The problem was discovered with left_shift = 16, and the included patch corrects the problem. The bug was introduced in the last (Apr 3 2009) commit of the file, kernel versions 2.6.30 and later. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Raphael Assenat <raph@8d.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yoichi Yuasa 提交于
drivers/rtc/rtc-vr41xx.c: In function 'vr41xx_rtc_irq_set_freq': drivers/rtc/rtc-vr41xx.c:217: warning: comparison of distinct pointer types lacks a cast drivers/rtc/rtc-vr41xx.c:217: warning: right shift count >= width of type drivers/rtc/rtc-vr41xx.c:217: warning: passing argument 1 of '__div64_32' from incompatible pointer type include/asm-generic/div64.h:35: note: expected 'uint64_t *' but argument is of type 'long unsigned int *' Signed-off-by: NYoichi Yuasa <yuasa@linux-mips.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Anton Blanchard 提交于
In setup_arg_pages we work hard to assign a value to ret, but on exit we always return 0. Also remove a now duplicated exit path and branch to out_unlock instead. Signed-off-by: NAnton Blanchard <anton@samba.org> Acked-by: NSerge Hallyn <serue@us.ibm.com> Reviewed-by: NWANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Guennadi Liakhovetski 提交于
The config FB_PRE_INIT_FB entry in drivers/video/Kconfig pushes all entries below it out of the menuconfig selection. Fix this. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Use git.kernel.org not www.kernel.org Signed-off-by: NJoe Perches <joe@perches.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ladislav Michl 提交于
Free IRQ on remove. Signed-off-by: NLadislav Michl <ladis@linux-mips.org> Acked-by: NTony Lindgren <tony@atomide.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lennert Buytenhek 提交于
This seems to be a different model (with a different PCI ID) than the "Quatro" card that is also in the list. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lennert Buytenhek 提交于
struct uart_port::iobase is unsigned long, so use %lx as printk format specifier. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Werner Almesberger 提交于
According to Documentation/rtc.txt, RTC_WKALM_SET sets the alarm time and enables/disables the alarm. We implement RTC_WKALM_SET through pcf50633_rtc_set_alarm. The enabling/disabling part was missing. Signed-off-by: NWerner Almesberger <werner@openmoko.org> Reported-by: NMichael 'Mickey' Lauer <mickey@openmoko.org> Signed-off-by: NPaul Fertser <fercerpav@gmail.com> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Balaji Rao <balajirrao@openmoko.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rask Ingemann Lambertsen 提交于
The PCF50633 stores a month value of 1-12, but the kernel wants 0-11. Signed-off-by: NRask Ingemann Lambertsen <rask@sygehus.dk> Signed-off-by: NPaul Fertser <fercerpav@gmail.com> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Balaji Rao <balajirrao@openmoko.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nicolas Ferre 提交于
at91sam9g45 non ES lots have an alternate pixel clock calculation formula. Introduce this one with condition on the cpu_is_xxxxx() macros. Newer 9g45 SOC will not have good pixel clock calculation without this fix. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Heiko Carstens 提交于
For FS_IOC_RESVSP and FS_IOC_RESVSP64 compat_sys_ioctl() uses its arg argument as a pointer to userspace. However it is missing a a call to compat_ptr() which will do a proper pointer conversion. This was introduced with 3e63cbb1 "fs: Add new pre-allocation ioctls to vfs for compatibility with legacy xfs ioctls". Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Cc: Ankit Jain <me@ankitjain.org> Acked-by: NChristoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: NArnd Bergmann <arndbergmann@googlemail.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Cc: <stable@kernel.org> [2.6.31.x] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sukadev Bhattiprolu 提交于
Daniel Lezcano reported a leak in 'struct pid' and 'struct pid_namespace' that is discussed in: http://lkml.org/lkml/2009/10/2/159. To summarize the thread, when container-init is terminated, it sets the PF_EXITING flag, zaps other processes in the container and waits to reap them. As a part of reaping, the container-init should flush any /proc dentries associated with the processes. But because the container-init is itself exiting and the following PF_EXITING check, the dentries are not flushed, resulting in leak in /proc inodes and dentries. This fix reverts the commit 7766755a ("Fix /proc dcache deadlock in do_exit") which introduced the check for PF_EXITING. At the time of the commit, shrink_dcache_parent() flushed dentries from other filesystems also and could have caused a deadlock which the commit fixed. But as pointed out by Eric Biederman, after commit 0feae5c4, shrink_dcache_parent() no longer affects other filesystems. So reverting the commit is now safe. As pointed out by Jan Kara, the leak is not as critical since the unclaimed space will be reclaimed under memory pressure or by: echo 3 > /proc/sys/vm/drop_caches But since this check is no longer required, its best to remove it. Signed-off-by: NSukadev Bhattiprolu <sukadev@us.ibm.com> Reported-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Acked-by: NEric W. Biederman <ebiederm@xmission.com> Acked-by: NJan Kara <jack@ucw.cz> Cc: Andrea Arcangeli <andrea@cpushare.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-