Select sp804 timer for ARCH_HISI, which is used as broadcast timer.
Signed-off-by: NLeo Yan <leo.yan@linaro.org>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

As a interrupt controller used on some of hisilicon SOCs(660,1610 etc.),
mbigen driver should be enabled when CONFIG_ARCH_HISI is enabled.
Signed-off-by: NMa Jun <majun258@huawei.com>
Cc: mark.rutland@arm.com
Cc: jason@lakedaemon.net
Cc: marc.zyngier@arm.com
Cc: Catalin.Marinas@arm.com
Cc: guohanjun@huawei.com
Cc: Will.Deacon@arm.com
Cc: huxinwei@huawei.com
Cc: lizefan@huawei.com
Cc: dingtianhong@huawei.com
Cc: zhaojunhua@hisilicon.com
Cc: liguozhu@hisilicon.com
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1458723993-21044-2-git-send-email-majun258@huawei.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Provide the ARCH_MESON Kconfig symbol to allow enabling existing serial
and i2c drivers.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NCarlo Caione <carlo@endlessm.com>

Select the Alpine MSI controller driver when using an Alpine platform.
Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: NTsahee Zidenberg <tsahee@annapurnalabs.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

This patch introduces ARCH_ALPINE to add the support of the Alpine SoC
family for the arm64 architecture.
Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

The ARMv8 Exynos family SoCs in Linux kernel are currently:
 - Exynos5433 (controlled by ARCH_EXYNOS),
 - Exynos7 (controlled by ARCH_EXYNOS7).

It duplicates Kconfig symbols unnecessarily, so consolidate them into
one ARCH_EXYNOS. Future SoCs could fall also under the ARCH_EXYNOS
symbol.

The commit should not bring any visible functional change.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: NChanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: NPankaj Dubey <pankaj.dubey@samsung.com>
Tested-by: NAlim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: NTomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: NAndi Shyti <andi.shyti@samsung.com>

Add a configuration option and a device tree for Broadcom's Vulcan
ARM64 processor. vulcan.dtsi has the on-chip blocks like the PCIe
controller, GICv3 with ITS, PMU, system timer and the pl011 UART.
vulcan-eval.dts has definitions for a basic evaluation board.

Vulcan's processor cores support the ARMv8.1 instruction set and
will use "brcm,vulcan" as the compatible property. The firmware
has PSCI 0.2 support for cpu wakeup.
Signed-off-by: NZi Shen Lim <zlim@broadcom.com>
[ updated and split dts - jchandra@broadcom.com ]
Signed-off-by: NJayachandran C <jchandra@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

This commit updates the ARCH_MVEBU Kconfig option introduced for
Armada 3700 to also be used for the Armada 7K and 8K platforms, by:

 - Selecting the appropriate clock and irqchip drivers
 - Updating the help text to mention Armada 7K and 8K
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>

All supported Renesas ARM64 SoCs have clock and power domains. To ensure
proper operation of on-SoC modules, module clocks must be ungated, and
power domains must be powered up when needed.

Currently the user can choose to build a kernel with power management
enabled or disabled:
  - If CONFIG_PM=y, power domains and/or module clocks are handled
    dynamically by Runtime PM and the generic power domain.
  - If CONFIG_PM=n, power domains are assumed to be powered up by reset
    state or by the boot loader, and module clocks are handled by the
    legacy clock domain on driver (un)bind.
    The latter is implemented using a platform bus notifier, which
    applies not only to all on-SoC devices, but to all platform devices
    present in the system.

To remove the dependency on implicit assumptions, and to get rid of the
peculiarities of the legacy clock domain, enable CONFIG_PM and
CONFIG_PM_GENERIC_DOMAINS unconditionally.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Select RENESAS_IRQC for Arm64 SoCs from Renesas to enable
build of drivers/irqchip/irq-renesas-irqc.c.
Signed-off-by: NMagnus Damm <damm+renesas@opensource.se>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

The Armada 3700 is an mvebu ARM64 SoC using one or two Cortex-A53 cores
depending of the variant.
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>

We select COMMON_CLK_IPROC, PINCTRL, and GPIOLIB in arm64 Kconfig
for ARCH_BCM_IPROC so that we can use COMMON_CLK, PINCTRL and GPIOLIB
with iProc SoC drivers.
Signed-off-by: NAnup Patel <anup.patel@broadcom.com>
Signed-off-by: NRay Jui <rjui@broadcom.com>
Signed-off-by: NYendapally Reddy Dhananjaya Reddy <yrdreddy@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

To prepare for supporting the Allwinner A64 SoC, introduce a config
option to allow compiling Allwinner (aka. sunxi) specific drivers
for ARM64.
This patch just defines the ARCH_SUNXI symbol to allow Allwinner
specific drivers to be selected during kernel configuration.
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

On the RK3368 SoC, support the APB timers for rockchip platform.
Signed-off-by: NCaesar Wang <wxt@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Enable MTK_TIMER for MediaTek plaform, which will be used as
tick broadcast device and schedule clock.
Signed-off-by: NYingjoe Chen <yingjoe.chen@mediatek.com>
Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>

Add the ARM64 Linux support for Socionext UniPhier SoCs.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Move per-SoC generation Kconfig symbols to drivers/soc/tegra/Kconfig to
gather them all in a single place. This directory is a natural location
for these options since it already contains the drivers that are shared
across 32-bit and 64-bit ARM architectures.
Signed-off-by: NThierry Reding <treding@nvidia.com>

This is to add the pinctrl dependency for Marvell Berlin SoCs.
Signed-off-by: NJisheng Zhang <jszhang@marvell.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NAntoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

Initial version of Renesas R-Car H3 support (V10)
Signed-off-by: NGaku Inami <gaku.inami.xw@bp.renesas.com>
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMagnus Damm <damm+renesas@opensource.se>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>

Freescale will be a spinning-out a set of ARMv8 based SoCs which
will be based on a similar overall SoC architecture. So, this patch
converts the existing infrastructure in the arm64/dts, arm64/Kconfig
and arm64/configs to use the generic convention ARCH_LAYERSCAPE
in place of the more specific FSL_LS2085A, to save code duplication
later-on.
Signed-off-by: NBhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Add the base DTS for Altera's SoCFPGA Stratix 10 platform.
Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com>
---
v4: Add a non-zero ranges property for /soc node
v3: change #address-cells and #size-cells to <2>
    change the GIC address to 0xfffc1000
    update the GIC virtual CPU reg length to 0x2000
v2: use interrupt-affinity for pmu node

All berlin SoCs have GPIOs driven by the dwapb GPIO driver. Add GPIOLIB
as a dependency to be able to support them.
Signed-off-by: NJisheng Zhang <jszhang@marvell.com>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

This patch introduces ARCH_BERLIN to enable Marvell Berlin SoC family in
Kconfig.
Signed-off-by: NJisheng Zhang <jszhang@marvell.com>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This patch adds support to Broadcom's iProc family of arm64 based SoCs
in the arm64 Kconfig and defconfig files
Signed-off-by: NRay Jui <rjui@broadcom.com>
Reviewed-by: NScott Branden <sbranden@broadcom.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

The rk3368 is Rockchip's first ARM64 soc, build around 8 Cortex-A53 cores.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Let's move out the platform Kconfig entries to a separate file, since these
changes usually get moved through arm-soc instead of the arm64 arch tree, and
this will lead to fewer conflicts
Signed-off-by: NOlof Johansson <olof@lixom.net>
Acked-by: NWill Deacon <will.deacon@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>