1. 20 7月, 2012 1 次提交
  2. 17 7月, 2012 3 次提交
  3. 16 7月, 2012 3 次提交
  4. 28 6月, 2012 1 次提交
  5. 14 6月, 2012 1 次提交
    • H
      s390/smp: make absolute lowcore / cpu restart parameter accesses more robust · fbe76568
      Heiko Carstens 提交于
      Setting the cpu restart parameters is done in three different fashions:
      - directly setting the four parameters individually
      - copying the four parameters with memcpy (using 4 * sizeof(long))
      - copying the four parameters using a private structure
      
      In addition code in entry*.S relies on a certain order of the restart
      members of struct _lowcore.
      
      Make all of this more robust to future changes by adding a
      mem_absolute_assign(dest, val) define, which assigns val to dest
      using absolute addressing mode. Also the load multiple instructions
      in entry*.S have been split into separate load instruction so the
      order of the struct _lowcore members doesn't matter anymore.
      
      In addition move the prototypes of memcpy_real/absolute from uaccess.h
      to processor.h. These memcpy* variants are not related to uaccess at all.
      string.h doesn't seem to match as well, so lets use processor.h.
      
      Also replace the eight byte array in struct _lowcore which represents a
      misaliged u64 with a u64. The compiler will always create code that
      handles the misaligned u64 correctly.
      Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
      Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      fbe76568
  6. 05 6月, 2012 17 次提交
  7. 04 6月, 2012 5 次提交
  8. 03 6月, 2012 9 次提交
    • L
      Linux 3.5-rc1 · f8f5701b
      Linus Torvalds 提交于
      f8f5701b
    • L
      Merge tag 'dm-3.5-changes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm · 912afc36
      Linus Torvalds 提交于
      Pull device-mapper updates from Alasdair G Kergon:
       "Improve multipath's retrying mechanism in some defined circumstances
        and provide a simple reserve/release mechanism for userspace tools to
        access thin provisioning metadata while the pool is in use."
      
      * tag 'dm-3.5-changes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
        dm thin: provide userspace access to pool metadata
        dm thin: use slab mempools
        dm mpath: allow ioctls to trigger pg init
        dm mpath: delay retry of bypassed pg
        dm mpath: reduce size of struct multipath
      912afc36
    • J
      dm thin: provide userspace access to pool metadata · cc8394d8
      Joe Thornber 提交于
      This patch implements two new messages that can be sent to the thin
      pool target allowing it to take a snapshot of the _metadata_.  This,
      read-only snapshot can be accessed by userland, concurrently with the
      live target.
      
      Only one metadata snapshot can be held at a time.  The pool's status
      line will give the block location for the current msnap.
      
      Since version 0.1.5 of the userland thin provisioning tools, the
      thin_dump program displays the msnap as follows:
      
          thin_dump -m <msnap root> <metadata dev>
      
      Available here: https://github.com/jthornber/thin-provisioning-tools
      
      Now that userland can access the metadata we can do various things
      that have traditionally been kernel side tasks:
      
           i) Incremental backups.
      
           By using metadata snapshots we can work out what blocks have
           changed over time.  Combined with data snapshots we can ensure
           the data doesn't change while we back it up.
      
           A short proof of concept script can be found here:
      
           https://github.com/jthornber/thinp-test-suite/blob/master/incremental_backup_example.rb
      
           ii) Migration of thin devices from one pool to another.
      
           iii) Merging snapshots back into an external origin.
      
           iv) Asyncronous replication.
      Signed-off-by: NJoe Thornber <ejt@redhat.com>
      Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      cc8394d8
    • M
      dm thin: use slab mempools · a24c2569
      Mike Snitzer 提交于
      Use dedicated caches prefixed with a "dm_" name rather than relying on
      kmalloc mempools backed by generic slab caches so the memory usage of
      thin provisioning (and any leaks) can be accounted for independently.
      Signed-off-by: NMike Snitzer <snitzer@redhat.com>
      Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      a24c2569
    • M
      dm mpath: allow ioctls to trigger pg init · 35991652
      Mikulas Patocka 提交于
      After the failure of a group of paths, any alternative paths that
      need initialising do not become available until further I/O is sent to
      the device.  Until this has happened, ioctls return -EAGAIN.
      
      With this patch, new paths are made available in response to an ioctl
      too.  The processing of the ioctl gets delayed until this has happened.
      
      Instead of returning an error, we submit a work item to kmultipathd
      (that will potentially activate the new path) and retry in ten
      milliseconds.
      
      Note that the patch doesn't retry an ioctl if the ioctl itself fails due
      to a path failure.  Such retries should be handled intelligently by the
      code that generated the ioctl in the first place, noting that some SCSI
      commands should not be retried because they are not idempotent (XOR write
      commands).  For commands that could be retried, there is a danger that
      if the device rejected the SCSI command, the path could be errorneously
      marked as failed, and the request would be retried on another path which
      might fail too.  It can be determined if the failure happens on the
      device or on the SCSI controller, but there is no guarantee that all
      SCSI drivers set these flags correctly.
      Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
      Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      35991652
    • M
      dm mpath: delay retry of bypassed pg · f220fd4e
      Mike Christie 提交于
      If I/O needs retrying and only bypassed priority groups are available,
      set the pg_init_delay_retry flag to wait before retrying.
      
      If, for example, the reason for the bypass is that the controller is
      getting reset or there is a firmware upgrade happening, retrying right
      away would cause a flood of log messages and retries for what could be a
      few seconds or even several minutes.
      Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
      Acked-by: NMike Snitzer <snitzer@redhat.com>
      Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      f220fd4e
    • M
      dm mpath: reduce size of struct multipath · 1fbdd2b3
      Mike Snitzer 提交于
      Move multipath structure's 'lock' and 'queue_size' members to eliminate
      two 4-byte holes.  Also use a bit within a single unsigned int for each
      existing flag (saves 8-bytes).  This allows future flags to be added
      without each consuming an unsigned int.
      Signed-off-by: NMike Snitzer <snitzer@redhat.com>
      Acked-by: NHannes Reinecke <hare@suse.de>
      Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      1fbdd2b3
    • L
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 4fc3acf2
      Linus Torvalds 提交于
      Pull networking updates from David Miller:
      
       1) Make syn floods consume significantly less resources by
      
          a) Not pre-COW'ing routing metrics for SYN/ACKs
          b) Mirroring the device queue mapping of the SYN for the SYN/ACK
             reply.
      
          Both from Eric Dumazet.
      
       2) Fix calculation errors in Byte Queue Limiting, from Hiroaki SHIMODA.
      
       3) Validate the length requested when building a paged SKB for a
          socket, so we don't overrun the page vector accidently.  From Jason
          Wang.
      
       4) When netlabel is disabled, we abort all IP option processing when we
          see a CIPSO option.  This isn't the right thing to do, we should
          simply skip over it and continue processing the remaining options
          (if any).  Fix from Paul Moore.
      
       5) SRIOV fixes for the mellanox driver from Jack orgenstein and Marcel
          Apfelbaum.
      
       6) 8139cp enables the receiver before the ring address is properly
          programmed, which potentially lets the device crap over random
          memory.  Fix from Jason Wang.
      
       7) e1000/e1000e fixes for i217 RST handling, and an improper buffer
          address reference in jumbo RX frame processing from Bruce Allan and
          Sebastian Andrzej Siewior, respectively.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
        fec_mpc52xx: fix timestamp filtering
        mcs7830: Implement link state detection
        e1000e: fix Rapid Start Technology support for i217
        e1000: look into the page instead of skb->data for e1000_tbi_adjust_stats()
        r8169: call netif_napi_del at errpaths and at driver unload
        tcp: reflect SYN queue_mapping into SYNACK packets
        tcp: do not create inetpeer on SYNACK message
        8139cp/8139too: terminate the eeprom access with the right opmode
        8139cp: set ring address before enabling receiver
        cipso: handle CIPSO options correctly when NetLabel is disabled
        net: sock: validate data_len before allocating skb in sock_alloc_send_pskb()
        bql: Avoid possible inconsistent calculation.
        bql: Avoid unneeded limit decrement.
        bql: Fix POSDIFF() to integer overflow aware.
        net/mlx4_core: Fix obscure mlx4_cmd_box parameter in QUERY_DEV_CAP
        net/mlx4_core: Check port out-of-range before using in mlx4_slave_cap
        net/mlx4_core: Fixes for VF / Guest startup flow
        net/mlx4_en: Fix improper use of "port" parameter in mlx4_en_event
        net/mlx4_core: Fix number of EQs used in ICM initialisation
        net/mlx4_core: Fix the slave_id out-of-range test in mlx4_eq_int
      4fc3acf2
    • L
      Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 63004afa
      Linus Torvalds 提交于
      Pull straggler x86 fixes from Peter Anvin:
       "Three groups of patches:
      
        - EFI boot stub documentation and the ability to print error messages;
        - Removal for PTRACE_ARCH_PRCTL for x32 (obsolete interface which
          should never have been ported, and the port is broken and
          potentially dangerous.)
        - ftrace stack corruption fixes.  I'm not super-happy about the
          technical implementation, but it is probably the least invasive in
          the short term.  In the future I would like a single method for
          nesting the debug stack, however."
      
      * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        x86, x32, ptrace: Remove PTRACE_ARCH_PRCTL for x32
        x86, efi: Add EFI boot stub documentation
        x86, efi; Add EFI boot stub console support
        x86, efi: Only close open files in error path
        ftrace/x86: Do not change stacks in DEBUG when calling lockdep
        x86: Allow nesting of the debug stack IDT setting
        x86: Reset the debug_stack update counter
        ftrace: Use breakpoint method to update ftrace caller
        ftrace: Synchronize variable setting with breakpoints
      63004afa