This patch removes uses of hcd->state and replaces hcd->state with
ohci->rh_state field.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds support for standby/S2R/hibernate for ehci-spear driver.
Signed-off-by: NDeepak Sikri <deepak.sikri@st.com>
Signed-off-by: NPratyush Anand <pratyush.anand@st.com>
Signed-off-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

__do_config_autodelink passes the data variable to the transport function.
If the calling functions pass a stack variable, this will eventually trigger
a DMA-API debug backtrace for mapping stack memory in the DMA buffer.  Fix
this by calling kmemdup for the passed data instead.
Signed-off-by: NJosh Boyer <jwboyer@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If USB UTMI PHY is not enable, writing to portsc register will lead to
kernel hang during boot up.
Signed-off-by: NShengzhou Liu <Shengzhou.Liu@freescale.com>
Reported-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When build i.mx platform with imx_v6_v7_defconfig, and after adding
USB Gadget support, it has below build error:

CC      drivers/usb/host/fsl-mph-dr-of.o
drivers/usb/host/fsl-mph-dr-of.c: In function 'fsl_usb2_device_register':
drivers/usb/host/fsl-mph-dr-of.c:97: error: 'struct pdev_archdata'
has no member named 'dma_mask'

It has discussed at: http://www.spinics.net/lists/linux-usb/msg57302.html

For PowerPC, there is dma_mask at struct pdev_archdata, but there is
no dma_mask at struct pdev_archdata for ARM. The pdev_archdata is
related to specific platform, it should NOT be accessed by
cross platform drivers, like USB.

The code for pdev_archdata should be useless, as for PowerPC,
it has already gotten the value for pdev->dev.dma_mask at function
arch_setup_pdev_archdata of arch/powerpc/kernel/setup-common.c.
Tested-by: NRamneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: NPeter Chen <peter.chen@freescale.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct spelling "peridic" to "periodic" in
drivers/usb/host/ehci-dbg.c
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the usb_disabled() check to the probe function and get rid of the
rather pointless message on module load.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Acked-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We had a user report that running setserial on /dev/ttyACM0 didn't work.
He pointed at an old patch by Oliver Neukum from 2008 that never went anywhere..
http://permalink.gmane.org/gmane.linux.usb.general/9236

I made some minor changes to get it to apply again, and got the user to retest on 3.1,
and he reported it worked for him. https://bugzilla.redhat.com/show_bug.cgi?id=787607

The diff below is against 3.3rc. The only difference between this and
the version the user tested is the removal of the if (!ACM_READY) test
Havard removed ACM_READY in 99823f45
I'm unclear if there's need for a different test in its place.

From: Oliver Neukum <oliver@neukum.org>
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If a MPC8xxx was being used, 'have_sysif_regs' should be set and
it should setup cache snooping for all the 4GB space on both PPC32
and PPC64.
Signed-off-by: NPan Jiafei <Jiafei.Pan@freescale.com>
Acked-by: NLi Yang <leoli@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The WDM_READ flag is cleared later iff desc->length is reduced to 0.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Tested-by: NBjørn Mork <bjorn@mork.no>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Since ehci-mv.c can cover Marvell PXA and MMP series including PXA168,
so this driver seems redundant now.
Signed-off-by: NNeil Zhang <zhangwm@marvell.com>
Cc: <tanmay.upadhyay@einfochips.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We must not allow the input buffer length to change while we're
shuffling the buffer contents.  We also mustn't clear the WDM_READ
flag after more data might have arrived.  Therefore move both of these
into the spinlocked region at the bottom of wdm_read().

When reading desc->length without holding the iuspin lock, use
ACCESS_ONCE() to ensure the compiler doesn't re-read it with
inconsistent results.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Tested-by: NBjørn Mork <bjorn@mork.no>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Gobi 1000 devices have a different port layout, which wasn't respected
by the current driver, and thus it grabbed the QMI/net port.  In the
near future we'll be attaching another driver to the QMI/net port for
these devices (cdc-wdm and qmi_wwan) so make sure the qcserial driver
doesn't claim them.  This patch also prevents qcserial from binding to
interfaces 0 and 1 on 1K devices because those interfaces do not
respond.
Signed-off-by: NDan Williams <dcbw@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

No one uses them anymore, they should be using the safer
usb_serial_register_drivers() and usb_serial_deregister_drivers()
functions instead.

Thanks to Alan Stern for writing these functions and porting all
in-kernel users to them.

Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This was missed in Alan's last round of conversions.

Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch (as1530) modifies the following usb-serial drivers from
drivers/staging to utilize the new usb_serial_{de}register_drivers()
routines:

	quatech_usb2 and serqt_usb2.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch (as1529) modifies the following usb-serial drivers to
utilize the new usb_serial_{de}register_drivers() routines:

	ti_usb_3410_5052, usb_debug, visor, vivopay-serial,
	whiteheat, and zio.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch (as1528) modifies the following usb-serial drivers to
utilize the new usb_serial_{de}register_drivers() routines:

	qcaux, qcserial, safe_serial, siemens_mpi, sierra,
	spcp8x5, ssu100, and symbolserial.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch (as1527) modifies the following usb-serial drivers to
utilize the new usb_serial_{de}register_drivers() routines:

	navman, omninet, opticon, option, oti6858, and pl2303.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch (as1526) modifies the following usb-serial drivers to
utilize the new usb_serial_{de}register_drivers() routines:

	keyspan, kl5kusb105, kobil_sct, mct_u232, mos7720,
	mos7840, and moto_modem.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch (as1525) modifies the following usb-serial drivers to
utilize the new usb_serial_{de}register_drivers() routines:

	io_edgeport, io_ti, ipaq, ipw, ir-usb, and iuu_phoenix.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch (as1524) modifies the following usb-serial drivers to
utilize the new usb_serial_{de}register_drivers() routines:

	digi_acceleport, empeg, ftdi_sio, funsoft, garmin_gps,
	and hp4x.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch (as1523) modifies the following usb-serial drivers to
utilize the new usb_serial_{de}register_drivers() routines:

	aircable, ark3116, belkin_sa, ch341, cp210x, cyberjack,
	and cypress_m8.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch (as1522) adds two new routines to the usb-serial core, for
registering and unregistering serial drivers.  Instead of registering
the usb_driver and usb_serial_drivers separately, with error checking
for each one, the drivers can all be registered and unregistered by a
single function call.  This reduces duplicated code.

More importantly, the new core routines change the order in which the
drivers are registered.  Currently the usb-serial drivers are all
registered first and the usb_driver is done last, which leaves a
window for problems.  A udev script may quickly add a new dynamic-ID
for a usb-serial driver, causing the corresponding usb_driver to be
probed.  If the usb_driver hasn't been registered yet then an oops
will occur.

The new routine prevents such problems by registering the usb_driver
first.  To insure that it gets probed properly for already-attached
serial devices, we call driver_attach() after all the usb-serial
drivers have been registered.

Along with adding the new routines, the patch modifies the "generic"
serial driver to use them.  Further patches will similarly modify all
the other in-tree USB serial drivers.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This is to pull in the xhci changes and the other fixes and device id
updates that were done in Linus's tree.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

USB bugfixes for 3.3-rc4

A number of new device ids, and a cleanup/fix for some of the option
device ids that shouldn't have been added in the first place.

There's also a few USB 3 fixes for problems that people have reported,
and a usb-storage bugfix to round it out.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

* tag 'usb-3.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: Added Kamstrup VID/PIDs to cp210x serial driver.
  USB: Serial: ti_usb_3410_5052: Add Abbot Diabetes Care cable id
  usb-storage: fix freezing of the scanning thread
  xhci: Fix encoding for HS bulk/control NAK rate.
  USB: Set hub depth after USB3 hub reset
  USB: Fix handoff when BIOS disables host PCI device.
  USB: option: cleanup zte 3g-dongle's pid in option.c
  USB: Don't fail USB3 probe on missing legacy PCI IRQ.
  xhci: Fix oops caused by more USB2 ports than USB3 ports.
  USB: Remove duplicate USB 3.0 hub feature #defines.

Intel, radeon, exynos fixes.

Intel: fixes a few Ivybridge hangs, along with fixing RC6 on SNB (still
not on, but at least allows for distros to patch it on easily).

radeon: oops reading some files in debugfs that weren't meant to appear,
a fix that touches a lot of files, so looks worse than it is, it fixes
an oops if a GPU reset fails and userspace keeps submitting more data,
along with a minor BIOS fix for newer boards.

exynos: a group of fixes for exynos, they've sent me a few more but
these were all I got through, and its no hw vanilla kernel users see a
lot off yet.

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon/kms/atom: dpms bios scratch reg updates
  drm/radeon/kms: properly set accel working flag and bailout when false
  drm/radeon: Only create additional ring debugfs files on Cayman or newer.
  drm/exynos: added postclose to release resource.
  drm/exynos: removed exynos_drm_fbdev_recreate function.
  drm/exynos: fixed page flip issue.
  drm/exynos: added possible_clones setup function.
  drm/exynos: removed pageflip_event_list init code when closed.
  drm/exynos: changed priority of mixer layers.
  drm/exynos: Fix typo in exynos_mixer.c
  drm/i915: do not enable RC6p on Sandy Bridge
  drm/i915: gen7: Disable the RHWO optimization as it can cause GPU hangs.
  drm/i915: gen7: work around a system hang on IVB
  drm/i915: gen7: Implement an L3 caching workaround.
  drm/i915: gen7: implement rczunit workaround

It contains 3 important fixes for ColdFire based machines:
 - fix processes getting stuck when running from strace
 - fix kernel vmalloced pages not being visible in all kernel contexts
 - fix shared user pages sometimes being visible in another process
   context

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: Do not set global share for non-kernel shared pages
  m68k: Add shared bit to Coldfire kernel page entries
  m68knommu: fix syscall tracing stuck process

Bugfixes for the NFS client.

Fix a nasty Oops in the NFSv4 getacl code, another source of infinite
loops in the NFSv4 state recovery code, and a regression in NFSv4.1
session initialisation.

Also deal with an NFSv4.1 memory leak.

* tag 'nfs-for-3.3-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv4: fix server_scope memory leak
  NFSv4.1: Fix a NFSv4.1 session initialisation regression
  NFSv4: Ensure we throw out bad delegation stateids on NFS4ERR_BAD_STATEID
  NFSv4: Fix an Oops in the NFSv4 getacl code

dpms bits not used on DCE4+
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If accel is not working many subsystem such as the ib pool might not be
initialized properly that can lead to segfault inside kernel when cs
ioctl is call with non working acceleration. To avoid this make sure
the accel working flag is false when an error in GPU startup happen and
return EBUSY from cs ioctl if accel is not working.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=46274

Tested with a Cayman card in a Llano system: The additional files are created
and working for the Cayman card but not created for the CPU's built-in GPU.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Merge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel into drm-fixes

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel:
  drm/i915: do not enable RC6p on Sandy Bridge
  drm/i915: gen7: Disable the RHWO optimization as it can cause GPU hangs.
  drm/i915: gen7: work around a system hang on IVB
  drm/i915: gen7: Implement an L3 caching workaround.
  drm/i915: gen7: implement rczunit workaround

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  maintainers: update my email address

A few more things this time around.  The only thing warranting some
commentry is the modpost change, which allows folk building a Thumb2
enabled kernel to see section mismatch warnings.  This is why many
weren't noticed with OMAP.

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM/audit: include audit header and fix audit arch
  ARM: OMAP: fix voltage domain build errors with PM_OPP disabled
  ARM/PCI: Remove ARM's duplicate definition of 'pcibios_max_latency'
  ARM: 7336/1: smp_twd: Don't register CPUFREQ notifiers if local timers are not initialised
  ARM: 7327/1: need to include asm/system.h in asm/processor.h
  ARM: 7326/2: PL330: fix null pointer dereference in pl330_chan_ctrl()
  ARM: 7164/3: PL330: Fix the size of the dst_cache_ctrl field
  ARM: 7325/1: fix v7 boot with lockdep enabled
  ARM: 7324/1: modpost: Fix section warnings for ARM for many compilers
  ARM: 7323/1: Do not allow ARM_LPAE on pre-ARMv7 architectures

Update my email address.
Signed-off-by: NJames Morris <james.l.morris@oracle.com>

The 'poll()' system call timeout parameter is supposed to be 'int', not
'long'.

Now, the reason this matters is that right now 32-bit compat mode is
broken on at least x86-64, because the 32-bit code just calls
'sys_poll()' directly on x86-64, and the 32-bit argument will have been
zero-extended, turning a signed 'int' into a large unsigned 'long'
value.

We could just introduce a 'compat_sys_poll()' function for this, and
that may eventually be what we have to do, but since the actual standard
poll() semantics is *supposed* to be 'int', and since at least on x86-64
glibc sign-extends the argument before invocing the system call (so
nobody can actually use a 64-bit timeout value in user space _anyway_,
even in 64-bit binaries), the simpler solution would seem to be to just
fix the definition of the system call to match what it should have been
from the very start.

If it turns out that somebody somehow circumvents the user-level libc
64-bit sign extension and actually uses a large unsigned 64-bit timeout
despite that not being how poll() is supposed to work, we will need to
do the compat_sys_poll() approach.
Reported-by: NThomas Meyer <thomas@m3y3r.de>
Acked-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This provides unified readq()/writeq() helper functions for 32-bit
drivers.

For some cases, readq/writeq without atomicity is harmful, and order of
io access has to be specified explicitly.  So in this patch, new two
header files which contain non-atomic readq/writeq are added.

 - <asm-generic/io-64-nonatomic-lo-hi.h> provides non-atomic readq/
   writeq with the order of lower address -> higher address

 - <asm-generic/io-64-nonatomic-hi-lo.h> provides non-atomic readq/
   writeq with reversed order

This allows us to remove some readq()s that were added drivers when the
default non-atomic ones were removed in commit dbee8a0a ("x86:
remove 32-bit versions of readq()/writeq()")

The drivers which need readq/writeq but can do with the non-atomic ones
must add the line:

  #include <asm-generic/io-64-nonatomic-lo-hi.h> /* or hi-lo.h */

But this will be nop in 64-bit environments, and no other #ifdefs are
required.  So I believe that this patch can solve the problem of
 1. driver-specific readq/writeq
 2. atomicity and order of io access

This patch is tested with building allyesconfig and allmodconfig as
ARCH=x86 and ARCH=i386 on top of tip/master.

Cc: Kashyap Desai <Kashyap.Desai@lsi.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Ravi Anand <ravi.anand@qlogic.com>
Cc: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: James Bottomley <James.Bottomley@parallels.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Roland Dreier <roland@purestorage.com>
Cc: James Bottomley <jbottomley@parallels.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NHitoshi Mitake <h.mitake@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NBruno Thomsen <bruno.thomsen@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This USB-serial cable with mini stereo jack enumerates as:
Bus 001 Device 004: ID 1a61:3410 Abbott Diabetes Care

It is a TI3410 inside.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>