The existing code adjusted it based on the worst case scenario for the returned
bitmap and the best case scenario for the supported attrs attribute.
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
[bfields@redhat.com: removed likely/unlikely's]
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

There are two calls that operate on ip_map_cache and are
directly called from the nfsd code. Other places will be
handled in a different way.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Note with "first" always 0, and "lastflags" initially 0, we always dump
a spurious set of 0 flags at the start, among other problems.

Fix.  And attempt to make the code a little more obvious.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

The git://linux-nfs.org/~bfields/linux.git nfsd-next branch doesn't
compile when nfsd is a module with the following error:

   ERROR: "get_task_comm" [fs/nfsd/nfsd.ko] undefined!

Replace the get_task_comm call with direct comm access, which is
safe for current.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Add CONFIG_NFSD_DEPRECATED, default to y.
Only include deprecated interface if this is defined.
This allows distros to remove this interface before the official
removal, and allows developers to test without it.
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

The syscall interface is has been replaced by a more flexible
interface since 2.6.0.  It is time to work towards discarding
the old interface.

So add a entry in feature-removal-schedule.txt and print a warning
when the interface is used.
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

This patch removes all but one call to lock_kernel() from the server.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

The idmap code manages request deferal by waiting for a reply from
userspace rather than putting the NFS request on a queue to be retried
from the start.
Now that the common deferal code does this there is no need for the
special code in idmap.
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Now that a slight delay in getting a reply to an upcall doesn't
require deferring of requests, request deferral for all NFSv4
requests - the concept doesn't really fit with the v4 model.
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

The NFSv4 client's callback server calls svc_gss_principal(), which
is defined in the auth_rpcgss.ko

The NFSv4 server has the same dependency, and in addition calls
svcauth_gss_flavor(), gss_mech_get_by_pseudoflavor(),
gss_pseudoflavor_to_service() and gss_mech_put() from the same module.

The module auth_rpcgss itself has no dependencies aside from sunrpc,
so we only need to select RPCSEC_GSS.
Reported-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Hi,

An NFS client executes a statfs("file", &buff) call.
"file" exists / existed, the client has read / written it,
but it has already closed it.

user_path(pathname, &path) looks up "file" successfully in the
directory-cache  and restarts the aging timer of the directory-entry.
Even if "file" has already been removed from the server, because the
lookupcache=positive option I use, keeps the entries valid for a while.

nfs_statfs() returns ESTALE if "file" has already been removed from the
server.

If the user application repeats the statfs("file", &buff) call, we
are stuck: "file" remains young forever in the directory-cache.
Signed-off-by: NZoltan Menyhart  <Zoltan.Menyhart@bull.net>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org

Reported-by: NBen Greear <greearb@candelatech.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org

The do_vfs_lock function on fs/nfs/file.c is only called if NLM is
not being used, via the -onolock mount option. Therefore it cannot
really be "out of sync with lock manager" when the local locking
function called returns an error, as there will be no corresponding
call to the NLM. For details, simply check the if/else on do_setlk
and do_unlk on fs/nfs/file.c.
Signed-Off-By: NFabio Olive Leite <fleite@redhat.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The workqueue implementation in 2.6.36-rcX has changed, resulting
in the workqueues no longer having dedicated threads for work
processing. This has caused severe livelocks under heavy parallel
create workloads because the log IO completions have been getting
held up behind metadata IO completions.  Hence log commits would
stall, memory allocation would stall because pages could not be
cleaned, and lock contention on the AIL during inode IO completion
processing was being seen to slow everything down even further.

By making the log Io completion workqueue a high priority workqueue,
they are queued ahead of all data/metadata IO completions and
processed before the data/metadata completions. Hence the log never
gets stalled, and operations needed to clean memory can continue as
quickly as possible. This avoids the livelock conditions and allos
the system to keep running under heavy load as per normal.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

An execve with a very large total of argument/environment strings
can take a really long time in the execve system call.  It runs
uninterruptibly to count and copy all the strings.  This change
makes it abort the exec quickly if sent a SIGKILL.

Note that this is the conservative change, to interrupt only for
SIGKILL, by using fatal_signal_pending().  It would be perfectly
correct semantics to let any signal interrupt the string-copying in
execve, i.e. use signal_pending() instead of fatal_signal_pending().
We'll save that change for later, since it could have user-visible
consequences, such as having a timer set too quickly make it so that
an execve can never complete, though it always happened to work before.
Signed-off-by: NRoland McGrath <roland@redhat.com>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This adds a preemption point during the copying of the argument and
environment strings for execve, in copy_strings().  There is already
a preemption point in the count() loop, so this doesn't add any new
points in the abstract sense.

When the total argument+environment strings are very large, the time
spent copying them can be much more than a normal user time slice.
So this change improves the interactivity of the rest of the system
when one process is doing an execve with very large arguments.
Signed-off-by: NRoland McGrath <roland@redhat.com>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The CONFIG_STACK_GROWSDOWN variant of setup_arg_pages() does not
check the size of the argument/environment area on the stack.
When it is unworkably large, shift_arg_pages() hits its BUG_ON.
This is exploitable with a very large RLIMIT_STACK limit, to
create a crash pretty easily.

Check that the initial stack is not too large to make it possible
to map in any executable.  We're not checking that the actual
executable (or intepreter, for binfmt_elf) will fit.  So those
mappings might clobber part of the initial stack mapping.  But
that is just userland lossage that userland made happen, not a
kernel problem.
Signed-off-by: NRoland McGrath <roland@redhat.com>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The XFS_IOC_FSGETXATTR ioctl allows unprivileged users to read 12
bytes of uninitialized stack memory, because the fsxattr struct
declared on the stack in xfs_ioc_fsgetxattr() does not alter (or zero)
the 12-byte fsx_pad member before copying it back to the user.  This
patch takes care of it.
Signed-off-by: NDan Rosenberg <dan.j.rosenberg@gmail.com>
Reviewed-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Commit 9eed1fb7 ("minix: replace inode uid,gid,mode init with helper")
broke directory creation on minix filesystems.

Fix it by passing the needed mode flag to inode init helper.
Signed-off-by: NJorge Boncompte [DTI2] <jorge@dti2.net>
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@kernel.org>		[2.6.35.x]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

O_NONBLOCK on parisc has a dual value:

#define O_NONBLOCK	000200004 /* HPUX has separate NDELAY & NONBLOCK */

It is caught by the O_* bits uniqueness check and leads to a parisc
compile error.  The fix would be to take O_NONBLOCK out.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
Cc: Jamie Lokier <jamie@shareable.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 74641f58 ("alpha: binfmt_aout fix") (May 2009) introduced a
regression - binfmt_misc is now consulted after binfmt_elf, which will
unfortunately break ia32el.  ia32 ELF binaries on ia64 used to be matched
using binfmt_misc and executed using wrapper.  As 32bit binaries are now
matched by binfmt_elf before bindmt_misc kicks in, the wrapper is ignored.

The fix increases precedence of binfmt_misc to the original state.
Signed-off-by: NJan Sembera <jsembera@suse.cz>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Richard Henderson <rth@twiddle.net
Cc: <stable@kernel.org>		[2.6.everything.x]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the left-over old ifdef for PG_uncached in /proc/kpageflags.  Now it's
used by x86, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

commit c2c6ca41 (direct-io: do not merge logically non-contiguous requests)
introduced a bug whereby all O_DIRECT I/Os were submitted a page at a time
to the block layer.  The problem is that the code expected
dio->block_in_file to correspond to the current page in the dio.  In fact,
it corresponds to the previous page submitted via submit_page_section.
This was purely an oversight, as the dio->cur_page_fs_offset field was
introduced for just this purpose.  This patch simply uses the correct
variable when calculating whether there is a mismatch between contiguous
logical blocks and contiguous physical blocks (as described in the
comments).

I also switched the if conditional following this check to an else if, to
ensure that we never call dio_bio_submit twice for the same dio (in
theory, this should not happen, anyway).

I've tested this by running blktrace and verifying that a 64KB I/O was
submitted as a single I/O.  I also ran the patched kernel through
xfstests' aio tests using xfs, ext4 (with 1k and 4k block sizes) and btrfs
and verified that there were no regressions as compared to an unpatched
kernel.
Signed-off-by: NJeff Moyer <jmoyer@redhat.com>
Acked-by: NJosef Bacik <jbacik@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: <stable@kernel.org>		[2.6.35.x]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

So it can be used by all that need to check for that.
Signed-off-by: NStefan Bader <stefan.bader@canonical.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ocfs2_create_inode_in_orphan() is used by reflink to create the newly
reflinked inode simultaneously in the orphan dir. This allows us to easily
handle partially-reflinked files during recovery cleanup.

We have a problem though - the orphan dir stringifies inode # to determine
a unique name under which the orphan entry dirent can be created. Since
ocfs2_create_inode_in_orphan() needs the space allocated in the orphan dir
before it can allocate the inode, we currently call into the orphan code:

       /*
        * We give the orphan dir the root blkno to fake an orphan name,
        * and allocate enough space for our insertion.
        */
       status = ocfs2_prepare_orphan_dir(osb, &orphan_dir,
                                         osb->root_blkno,
                                         orphan_name, &orphan_insert);

Using osb->root_blkno might work fine on unindexed directories, but the
orphan dir can have an index.  When it has that index, the above code fails
to allocate the proper index entry.  Later, when we try to remove the file
from the orphan dir (using the actual inode #), the reflink operation will
fail.

To fix this, I created a function ocfs2_alloc_orphaned_file() which uses the
newly split out orphan and inode alloc code to figure out what the inode
block number will be (once allocated) and then prepare the orphan dir from
that data.
Signed-off-by: NMark Fasheh <mfasheh@suse.com>
Signed-off-by: NTao Ma <tao.ma@oracle.com>

We do this because ocfs2_create_inode_in_orphan() wants to order locking of
the orphan dir with respect to locking of the inode allocator *before*
making any changes to the directory.
Signed-off-by: NMark Fasheh <mfasheh@suse.com>
Signed-off-by: NTao Ma <tao.ma@oracle.com>

This allows code which needs to know the eventual block number of an inode
but can't allocate it yet due to transaction or lock ordering. For example,
ocfs2_create_inode_in_orphan() currently gives a junk blkno for preparation
of the orphan dir because it can't yet know where the actual inode is placed
- that code is actually in ocfs2_mknod_locked. This is a problem when the
orphan dirs are indexed as the junk inode number will create an index entry
which goes unused (and fails the later removal from the orphan dir).  Now
with these interfaces, ocfs2_create_inode_in_orphan() can run the block
group search (and get back the inode block number) *before* any actual
allocation occurs.
Signed-off-by: NMark Fasheh <mfasheh@suse.com>
Signed-off-by: NTao Ma <tao.ma@oracle.com>

ocfs2_search_chain() makes the same updates as
ocfs2_alloc_dinode_update_counts to the alloc inode. Instead of open coding
the bitmap update, use our helper function.
Signed-off-by: NMark Fasheh <mfasheh@suse.com>
Signed-off-by: NTao Ma <tao.ma@oracle.com>

Do this by splitting the bulk of the function away from the inode allocation
code at the very tom of ocfs2_mknod_locked(). Existing callers don't need to
change and won't see any difference. The new function created,
__ocfs2_mknod_locked() will be used shortly.
Signed-off-by: NMark Fasheh <mfasheh@suse.com>
Signed-off-by: NTao Ma <tao.ma@oracle.com>

The patch is to fix the regression bug brought from commit 6b933c8e...( 'ocfs2:
Avoid direct write if we fall back to buffered I/O'):

http://oss.oracle.com/bugzilla/show_bug.cgi?id=1285

The commit 6b933c8e changed __generic_file_aio_write
to generic_file_buffered_write, which didn't call filemap_{write,wait}_range to  flush
the pagecaches when we were falling O_DIRECT writes back to buffered ones. it did hurt
the O_DIRECT semantics somehow in extented odirect writes.

This patch tries to guarantee O_DIRECT writes of 'fall back to buffered' to be correctly
flushed.
Signed-off-by: NTristan Ye <tristan.ye@oracle.com>
Signed-off-by: NTao Ma <tao.ma@oracle.com>

We cannot call grab_cache_page() when holding filesystem locks or with
a transaction started as grab_cache_page() calls page allocation with
GFP_KERNEL flag and thus page reclaim can recurse back into the filesystem
causing deadlocks or various assertion failures. We have to use
find_or_create_page() instead and pass it GFP_NOFS as we do with other
allocations.
Acked-by: NMark Fasheh <mfasheh@suse.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTao Ma <tao.ma@oracle.com>

We were setting ac->ac_last_group in ocfs2_claim_suballoc_bits from
res->sr_bg_blkno.  Unfortunately, res->sr_bg_blkno is going to be zero under
normal (non-fragmented) circumstances. The discontig block group patches
effectively turned off that feature. Fix this by correctly calculating what
the next group hint should be.
Acked-by: NTao Ma <tao.ma@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>
Tested-by: NGoldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: NTao Ma <tao.ma@oracle.com>

We have added discontig block group now, and now an inode
can be allocated in an discontig block group. So get
it in ocfs2_get_suballoc_slot_bit.

The old ocfs2_test_suballoc_bit gets group block no
from the allocation inode which is wrong. Fix it by
passing the right group.
Acked-by: NMark Fasheh <mfasheh@suse.com>
Signed-off-by: NTao Ma <tao.ma@oracle.com>

When 'barrier' mount option is specified, we have to issue a cache flush
during fdatasync(2). We have to do this even if inode doesn't have
I_DIRTY_DATASYNC set because we still have to get written *data* to disk so
that they are not lost in case of crash.
Acked-by: NTao Ma <tao.ma@oracle.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Singed-off-by: NTao Ma <tao.ma@oracle.com>

__ocfs2_page_mkwrite now is broken in handling file end.
1. the last page should be the page contains i_size - 1.
2. the len in the last page is also calculated wrong.
So change them accordingly.
Acked-by: NMark Fasheh <mfasheh@suse.com>
Signed-off-by: NTao Ma <tao.ma@oracle.com>

For local mounts, ocfs2_read_locked_inode() calls ocfs2_read_blocks_sync() to
read the inode off the disk. The latter first checks to see if that block is
cached in the journal, and, if so, returns that block. That is ok.

But ocfs2_read_locked_inode() goes wrong when it tries to validate the checksum
of such blocks. Blocks that are cached in the journal may not have had their
checksum computed as yet. We should not validate the checksums of such blocks.

Fixes ossbz#1282
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1282Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Cc: stable@kernel.org
Singed-off-by: NTao Ma <tao.ma@oracle.com>

Like tools, the checksum validate function now prints the values in hex.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Singed-off-by: NTao Ma <tao.ma@oracle.com>

This protects us from confusion when the wallclock time changes.

We convert to and from wallclock when  setting or reading expiry
times.

Also use seconds since boot for last_clost time.
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Rather can duplicating this idiom twice, put it in an inline function.
This reduces the usage of 'expiry_time' out side the sunrpc/cache.c
code and thus the impact of a change that is about to be made to that
field.
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Use NFS4_STATEID_SIZE from include/linux/nfs4
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>