Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 170
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 01 6月, 2013 1 次提交
    • M
      powerpc/tm: Fix userspace stack corruption on signal delivery for active transactions · 2b3f8e87
      由 Michael Neuling 提交于 
      When in an active transaction that takes a signal, we need to be careful with
the stack.  It's possible that the stack has moved back up after the tbegin.
The obvious case here is when the tbegin is called inside a function that
returns before a tend.  In this case, the stack is part of the checkpointed
transactional memory state.  If we write over this non transactionally or in
suspend, we are in trouble because if we get a tm abort, the program counter
and stack pointer will be back at the tbegin but our in memory stack won't be
valid anymore.

To avoid this, when taking a signal in an active transaction, we need to use
the stack pointer from the checkpointed state, rather than the speculated
state.  This ensures that the signal context (written tm suspended) will be
written below the stack required for the rollback.  The transaction is aborted
becuase of the treclaim, so any memory written between the tbegin and the
signal will be rolled back anyway.

For signals taken in non-TM or suspended mode, we use the
normal/non-checkpointed stack pointer.

Tested with 64 and 32 bit signals
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Cc: <stable@vger.kernel.org> # v3.9
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      2b3f8e87
  3. 14 5月, 2013 2 次提交
  5. 04 2月, 2013 1 次提交
  7. 16 1月, 2013 1 次提交
  9. 10 1月, 2013 1 次提交
  11. 04 11月, 2012 1 次提交
  13. 10 9月, 2012 1 次提交
  15. 05 9月, 2012 1 次提交
    • A
      powerpc: Uprobes port to powerpc · 8b7b80b9
      由 Ananth N Mavinakayanahalli 提交于 
      This is the port of uprobes to powerpc. Usage is similar to x86.

[root@xxxx ~]# ./bin/perf probe -x /lib64/libc.so.6 malloc
Added new event:
  probe_libc:malloc    (on 0xb4860)

You can now use it in all perf tools, such as:

	perf record -e probe_libc:malloc -aR sleep 1

[root@xxxx ~]# ./bin/perf record -e probe_libc:malloc -aR sleep 20
[ perf record: Woken up 22 times to write data ]
[ perf record: Captured and wrote 5.843 MB perf.data (~255302 samples) ]
[root@xxxx ~]# ./bin/perf report --stdio
...

    69.05%           tar  libc-2.12.so   [.] malloc
    28.57%            rm  libc-2.12.so   [.] malloc
     1.32%  avahi-daemon  libc-2.12.so   [.] malloc
     0.58%          bash  libc-2.12.so   [.] malloc
     0.28%          sshd  libc-2.12.so   [.] malloc
     0.08%    irqbalance  libc-2.12.so   [.] malloc
     0.05%         bzip2  libc-2.12.so   [.] malloc
     0.04%         sleep  libc-2.12.so   [.] malloc
     0.03%    multipathd  libc-2.12.so   [.] malloc
     0.01%      sendmail  libc-2.12.so   [.] malloc
     0.01%     automount  libc-2.12.so   [.] malloc

The trap_nr addition patch is a prereq.
Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      8b7b80b9
  17. 02 6月, 2012 6 次提交
  19. 24 5月, 2012 1 次提交
  21. 29 3月, 2012 1 次提交
  23. 07 3月, 2012 1 次提交
    • M
      powerpc: Use set_current_blocked() and block_sigmask() · a2007ce8
      由 Matt Fleming 提交于 
      As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block
is pending in the shared queue.

Also, use the new helper function introduced in commit 5e6292c0
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures. In the past some architectures got this
code wrong, so using this helper function should stop that from
happening again.

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      a2007ce8
  25. 22 2月, 2012 1 次提交
    • B
      powerpc: Fix various issues with return to userspace · 18b246fa
      由 Benjamin Herrenschmidt 提交于 
      We have a few problems when returning to userspace. This is a
quick set of fixes for 3.3, I'll look into a more comprehensive
rework for 3.4. This fixes:

 - We kept interrupts soft-disabled when schedule'ing or calling
do_signal when returning to userspace as a result of a hardware
interrupt.

 - Rename do_signal to do_notify_resume like all other archs (and
do_signal_pending back to do_signal, which it was before Roland
changed it).

 - Add the missing call to key_replace_session_keyring() to
do_notify_resume().
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
---
      18b246fa
  27. 23 9月, 2010 1 次提交
  29. 22 6月, 2010 1 次提交
    • K
      powerpc, hw_breakpoint: Enable hw-breakpoints while handling intervening signals · 06532a67
      由 K.Prasad 提交于 
      A signal delivered between a hw_breakpoint_handler() and the
single_step_dabr_instruction() will not have the breakpoint active
while the signal handler is running -- the signal delivery will
set up a new MSR value which will not have MSR_SE set, so we
won't get the signal step interrupt until and unless the signal
handler returns (which it may never do).

To fix this, we restore the breakpoint when delivering a signal --
we clear the MSR_SE bit and set the DABR again.  If the signal
handler returns, the DABR interrupt will occur again when the
instruction that we were originally trying to single-step gets
re-executed.

[Paul Mackerras <paulus@samba.org> pointed out the need to do this.]
Signed-off-by: NK.Prasad <prasad@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
      06532a67
  31. 17 2月, 2010 2 次提交
    • D
      powerpc/booke: Add support for advanced debug registers · 3bffb652
      由 Dave Kleikamp 提交于 
      powerpc/booke: Add support for advanced debug registers

From: Dave Kleikamp <shaggy@linux.vnet.ibm.com>

Based on patches originally written by Torez Smith.

This patch defines context switch and trap related functionality
for BookE specific Debug Registers. It adds support to ptrace()
for setting and getting BookE related Debug Registers
Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Torez Smith  <lnxtorez@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Gibson <dwg@au1.ibm.com>
Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Sergio Durigan Junior <sergiodj@br.ibm.com>
Cc: Thiago Jung Bauermann <bauerman@br.ibm.com>
Cc: linuxppc-dev list <Linuxppc-dev@ozlabs.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      3bffb652
    • D
      powerpc/booke: Introduce new CONFIG options for advanced debug registers · 172ae2e7
      由 Dave Kleikamp 提交于 
      powerpc/booke: Introduce new CONFIG options for advanced debug registers

From: Dave Kleikamp <shaggy@linux.vnet.ibm.com>

Introduce new config options to simplify the ifdefs pertaining to the
advanced debug registers for booke and 40x processors:

CONFIG_PPC_ADV_DEBUG_REGS - boolean: true for dac-based processors
CONFIG_PPC_ADV_DEBUG_IACS - number of IAC registers
CONFIG_PPC_ADV_DEBUG_DACS - number of DAC registers
CONFIG_PPC_ADV_DEBUG_DVCS - number of DVC registers
CONFIG_PPC_ADV_DEBUG_DAC_RANGE - DAC ranges supported

Beginning conservatively, since I only have the facilities to test 440
hardware.  I believe all 40x and booke platforms support at least 2 IAC
and 2 DAC registers.  For 440, 4 IAC and 2 DVC registers are enabled, as
well as the DAC ranges.
Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com>
Acked-by: NDavid Gibson <dwg@au1.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      172ae2e7
  33. 27 3月, 2009 1 次提交
    • J
      powerpc: Sanitize stack pointer in signal handling code · efbda860
      由 Josh Boyer 提交于 
      On powerpc64 machines running 32-bit userspace, we can get garbage bits in the
stack pointer passed into the kernel.  Most places handle this correctly, but
the signal handling code uses the passed value directly for allocating signal
stack frames.

This fixes the issue by introducing a get_clean_sp function that returns a
sanitized stack pointer.  For 32-bit tasks on a 64-bit kernel, the stack
pointer is masked correctly.  In all other cases, the stack pointer is simply
returned.

Additionally, we pass an 'is_32' parameter to get_sigframe now in order to
get the properly sanitized stack.  The callers are know to be 32 or 64-bit
statically.
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      efbda860
  35. 28 7月, 2008 3 次提交
  37. 26 7月, 2008 1 次提交
  39. 25 7月, 2008 1 次提交
  41. 14 5月, 2008 1 次提交
  43. 12 10月, 2007 1 次提交
  45. 14 6月, 2007 8 次提交