Add the missing destroy_workqueue() before return from
qlcnic_probe() in the error handling case.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fix the error handling in moxart_mac_probe():
 - return -ENOMEM in some memory alloc fail cases
 - add missing free_netdev() in the error handling case
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes the calculation of the nlmsg size, by adding the missing
nla_total_size().

Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TCA_FQ_INITIAL_QUANTUM should set q->initial_quantum
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Unlike ipv4, the struct member hlen holds the length of the GRE and ipv6
headers. This length is also counted in dev->hard_header_len.
Perhaps, it's more clean to modify the hlen to count only the GRE header
without ipv6 header as the variable name suggest, but the simple way to fix
this without regression risk is simply modify the calculation of the limit
in ip6gre_tunnel_change_mtu function.
Verified in kernel version v3.11.
Signed-off-by: NOussama Ghorbel <ou.ghorbel@gmail.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If a guest is destroyed without transitioning its frontend to CLOSED,
the domain becomes a zombie as netback was not grant unmapping the
shared rings.

When removing a VIF, transition the backend to CLOSED so the VIF is
disconnected if necessary (which will unmap the shared rings etc).

This fixes a regression introduced by
279f438e (xen-netback: Don't destroy
the netdev until the vif is shut down).
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Paul Durrant <Paul.Durrant@citrix.com>
Acked-by: NWei Liu <wei.liu2@citrix.com>
Reviewed-by: NPaul Durrant <paul.durrant@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Amir Vadai says:

====================
net/mlx4_en: Fix pages never dma unmapped on rx

This patchset fixes a bug introduced by commit 51151a16 (mlx4: allow order-0
memory allocations in RX path). Where dma_unmap_page wasn't called.

Changes from V0:
- Added "Rename name of mlx4_en_rx_alloc members". Old names were confusing.
- Last frag in page calculation was wrong. Since all frags in page are of the
  same size, need to add this frag_stride to end of frag offset, and not the
  size of next frag in skb.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes a bug introduced by commit 51151a16 (mlx4: allow
order-0 memory allocations in RX path).

dma_unmap_page never reached because condition to detect last fragment
in page is wrong. offset+frag_stride can't be greater than size, need to
make sure no additional frag will fit in page => compare offset +
frag_stride + next_frag_size instead.
next_frag_size is the same as the current one, since page is shared only
with frags of the same size.

CC: Eric Dumazet <edumazet@google.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add page prefix to page related members: @size and @offset into
@page_size and @page_offset

CC: Eric Dumazet <edumazet@google.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch will fix RX packets errors when receiving big size
of data by set bit RNC = 1.

RNC - Receive Enable Control

0: Upon completion of reception of one frame, the E-DMAC writes
the receive status to the descriptor and clears the RR bit in
EDRRR to 0.

1: Upon completion of reception of one frame, the E-DMAC writes
(writes back) the receive status to the descriptor. In addition,
the E-DMAC reads the next descriptor and prepares for reception
of the next frame.

In addition, for get more stable when receiving packets, I set
maximum size for the transmit/receive FIFO and inserts padding
in receive data.
Signed-off-by: NNguyen Hong Ky <nh-ky@jinso.co.jp>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

net/l2tp/l2tp_core.c: In function ‘l2tp_verify_udp_checksum’:
net/l2tp/l2tp_core.c:499:22: warning: unused variable ‘tunnel’ [-Wunused-variable]

Create a helper "l2tp_tunnel()" to facilitate this, and as a side
effect get rid of a bunch of unnecessary void pointer casts.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We play with a wait queue even if socket is
non blocking. This is an obvious waste.
Besides, it will prevent calling the non blocking
variant when current is not valid.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alan Ott says:

====================
Fix race conditions in mrf24j40 interrupts

After testing with the betas of this patchset, it's been rebased and is
ready for inclusion.

David Hauweele noticed that the mrf24j40 would hang arbitrarily after some
period of heavy traffic.  Two race conditions were discovered, and the
driver was changed to use threaded interrupts, since the enable/disable of
interrupts in the driver has recently been a lighning rod whenever issues
arise related to interrupts (costing engineering time), and since threaded
interrupts are the right way to do it.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The mrf24j40 generates level interrupts. There are rare cases where it
appears that the interrupt line never gets de-asserted between interrupts,
causing interrupts to be lost, and causing a hung device from the driver's
perspective.  Switching the driver to interpret these interrupts as
level-triggered fixes this issue.
Signed-off-by: NAlan Ott <alan@signal11.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eliminate all the workqueue and interrupt enable/disable.
Signed-off-by: NAlan Ott <alan@signal11.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This avoids a race condition where complete(tx_complete) could be called
before tx_complete is initialized.
Signed-off-by: NAlan Ott <alan@signal11.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alan Ott says:

====================
Alexander Aring suggested that devices desired to be linked to 6lowpan
be checked for actually being of type IEEE802154, since IEEE802154 devices
are all that are supported by 6lowpan at present.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a lowpan link to a wpan device is created, set the hardware address
of the lowpan link to that of the wpan device.
Signed-off-by: NAlan Ott <alan@signal11.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Refuse to create 6lowpan links if the actual hardware interface is
of any type other than ARPHRD_IEEE802154.
Signed-off-by: NAlan Ott <alan@signal11.us>
Suggested-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On Tue, 20 Aug 2013 11:40:04 -0500 Eric Sandeen <sandeen@redhat.com> wrote:
> This was brought up in a Red Hat bug (which may be marked private, I'm sorry):
>
> Bug 987055 - open O_WRONLY succeeds on some root owned files in /proc for process running with unprivileged EUID
>
> "On RHEL7 some of the files in /proc can be opened for writing by an unprivileged EUID."
>
> The flaw existed upstream as well last I checked.
>
> This commit in kernel v3.8 caused the regression:
>
> commit cff10976
> Author: Eric W. Biederman <ebiederm@xmission.com>
> Date:   Fri Nov 16 03:03:01 2012 +0000
>
>     net: Update the per network namespace sysctls to be available to the network namespace owner
>
>     - Allow anyone with CAP_NET_ADMIN rights in the user namespace of the
>       the netowrk namespace to change sysctls.
>     - Allow anyone the uid of the user namespace root the same
>       permissions over the network namespace sysctls as the global root.
>     - Allow anyone with gid of the user namespace root group the same
>       permissions over the network namespace sysctl as the global root group.
>
>     Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
>     Signed-off-by: David S. Miller <davem@davemloft.net>
>
> because it changed /sys/net's special permission handler to test current_uid, not
> current_euid; same for current_gid/current_egid.
>
> So in this case, root cannot drop privs via set[ug]id, and retains all privs
> in this codepath.

Modify the code to use current_euid(), and in_egroup_p, as in done
in fs/proc/proc_sysctl.c:test_perm()

Cc: stable@vger.kernel.org
Reviewed-by: NEric Sandeen <sandeen@redhat.com>
Reported-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes the calculation of the nlmsg size, by adding the missing
nla_total_size().
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When sending out multicast messages, the source address in inet->mc_addr is
ignored and rewritten by an autoselected one. This is caused by a typo in
commit 813b3b5d ("ipv4: Use caller's on-stack flowi as-is in output
route lookups").
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Acked-by: NMugunthan V N <mugunthanvnm@ti.com>
Acked-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current implementation searches the whole DT for nodes named
"slave".

This patch changes it to search only child nodes for slaves.
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Acked-by: NMugunthan V N <mugunthanvnm@ti.com>
Acked-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

on x86 system with net.core.bpf_jit_enable = 1

sudo tcpdump -i eth1 'tcp port 22'

causes the warning:
[   56.766097]  Possible unsafe locking scenario:
[   56.766097]
[   56.780146]        CPU0
[   56.786807]        ----
[   56.793188]   lock(&(&vb->lock)->rlock);
[   56.799593]   <Interrupt>
[   56.805889]     lock(&(&vb->lock)->rlock);
[   56.812266]
[   56.812266]  *** DEADLOCK ***
[   56.812266]
[   56.830670] 1 lock held by ksoftirqd/1/13:
[   56.836838]  #0:  (rcu_read_lock){.+.+..}, at: [<ffffffff8118f44c>] vm_unmap_aliases+0x8c/0x380
[   56.849757]
[   56.849757] stack backtrace:
[   56.862194] CPU: 1 PID: 13 Comm: ksoftirqd/1 Not tainted 3.12.0-rc3+ #45
[   56.868721] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012
[   56.882004]  ffffffff821944c0 ffff88080bbdb8c8 ffffffff8175a145 0000000000000007
[   56.895630]  ffff88080bbd5f40 ffff88080bbdb928 ffffffff81755b14 0000000000000001
[   56.909313]  ffff880800000001 ffff880800000000 ffffffff8101178f 0000000000000001
[   56.923006] Call Trace:
[   56.929532]  [<ffffffff8175a145>] dump_stack+0x55/0x76
[   56.936067]  [<ffffffff81755b14>] print_usage_bug+0x1f7/0x208
[   56.942445]  [<ffffffff8101178f>] ? save_stack_trace+0x2f/0x50
[   56.948932]  [<ffffffff810cc0a0>] ? check_usage_backwards+0x150/0x150
[   56.955470]  [<ffffffff810ccb52>] mark_lock+0x282/0x2c0
[   56.961945]  [<ffffffff810ccfed>] __lock_acquire+0x45d/0x1d50
[   56.968474]  [<ffffffff810cce6e>] ? __lock_acquire+0x2de/0x1d50
[   56.975140]  [<ffffffff81393bf5>] ? cpumask_next_and+0x55/0x90
[   56.981942]  [<ffffffff810cef72>] lock_acquire+0x92/0x1d0
[   56.988745]  [<ffffffff8118f52a>] ? vm_unmap_aliases+0x16a/0x380
[   56.995619]  [<ffffffff817628f1>] _raw_spin_lock+0x41/0x50
[   57.002493]  [<ffffffff8118f52a>] ? vm_unmap_aliases+0x16a/0x380
[   57.009447]  [<ffffffff8118f52a>] vm_unmap_aliases+0x16a/0x380
[   57.016477]  [<ffffffff8118f44c>] ? vm_unmap_aliases+0x8c/0x380
[   57.023607]  [<ffffffff810436b0>] change_page_attr_set_clr+0xc0/0x460
[   57.030818]  [<ffffffff810cfb8d>] ? trace_hardirqs_on+0xd/0x10
[   57.037896]  [<ffffffff811a8330>] ? kmem_cache_free+0xb0/0x2b0
[   57.044789]  [<ffffffff811b59c3>] ? free_object_rcu+0x93/0xa0
[   57.051720]  [<ffffffff81043d9f>] set_memory_rw+0x2f/0x40
[   57.058727]  [<ffffffff8104e17c>] bpf_jit_free+0x2c/0x40
[   57.065577]  [<ffffffff81642cba>] sk_filter_release_rcu+0x1a/0x30
[   57.072338]  [<ffffffff811108e2>] rcu_process_callbacks+0x202/0x7c0
[   57.078962]  [<ffffffff81057f17>] __do_softirq+0xf7/0x3f0
[   57.085373]  [<ffffffff81058245>] run_ksoftirqd+0x35/0x70

cannot reuse jited filter memory, since it's readonly,
so use original bpf insns memory to hold work_struct

defer kfree of sk_filter until jit completed freeing

tested on x86_64 and i386
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The (inner) MTU of a ipip6 (IPv4-in-IPv6) tunnel cannot be set below 1280, which is the minimum MTU in IPv6.
However, there should be no IPv6 on the tunnel interface at all, so the IPv6 rules should not apply.
More info at https://bugzilla.kernel.org/show_bug.cgi?id=15530

This patch allows to check the minimum MTU for ipv6 tunnel according to these rules:
-In case the tunnel is configured with ipip6 mode the minimum MTU is 68.
-In case the tunnel is configured with ip6ip6 or any mode the minimum MTU is 1280.
Signed-off-by: NOussama Ghorbel <ou.ghorbel@gmail.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

virtio wants to pass in cpumask_of(cpu), make parameter
const to avoid build warnings.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Yuchung found following problem :

 There are bugs in the SACK processing code, merging part in
 tcp_shift_skb_data(), that incorrectly resets or ignores the sacked
 skbs FIN flag. When a receiver first SACK the FIN sequence, and later
 throw away ofo queue (e.g., sack-reneging), the sender will stop
 retransmitting the FIN flag, and hangs forever.

Following packetdrill test can be used to reproduce the bug.

$ cat sack-merge-bug.pkt
`sysctl -q net.ipv4.tcp_fack=0`

// Establish a connection and send 10 MSS.
0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+.000 bind(3, ..., ...) = 0
+.000 listen(3, 1) = 0

+.050 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7>
+.000 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 6>
+.001 < . 1:1(0) ack 1 win 1024
+.000 accept(3, ..., ...) = 4

+.100 write(4, ..., 12000) = 12000
+.000 shutdown(4, SHUT_WR) = 0
+.000 > . 1:10001(10000) ack 1
+.050 < . 1:1(0) ack 2001 win 257
+.000 > FP. 10001:12001(2000) ack 1
+.050 < . 1:1(0) ack 2001 win 257 <sack 10001:11001,nop,nop>
+.050 < . 1:1(0) ack 2001 win 257 <sack 10001:12002,nop,nop>
// SACK reneg
+.050 < . 1:1(0) ack 12001 win 257
+0 %{ print "unacked: ",tcpi_unacked }%
+5 %{ print "" }%

First, a typo inverted left/right of one OR operation, then
code forgot to advance end_seq if the merged skb carried FIN.

Bug was added in 2.6.29 by commit 832d11c5
("tcp: Try to restore large SKBs while SACK processing")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Acked-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

John W. Linville says:

====================
Here is another batch of fixes intended for the 3.12 stream...

For the mac80211 bits, Johannes says:

"This time I have two fixes for IBSS (including one for wext, hah), a fix
for extended rates IEs, an active monitor checking fix and a sysfs
registration race fix."

On top of those...

Amitkumar Karwar brings an mwifiex fix for an interrupt loss issue
w/ SDIO devices.  The problem was due to a command timeout issue
introduced by an earlier patch.

Felix Fietkau a stall in the ath9k driver.  This patch fixes the
regression introduced in the commit "ath9k: use software queues for
un-aggregated data packets".

Stanislaw Gruszka reverts an rt2x00 patch that was found to cause
connection problems with some devices.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to cap ->msg_namelen or it leads to a buffer overflow when we
to the memcpy() in __audit_sockaddr().  It requires CAP_AUDIT_CONTROL to
exploit this bug.

The call tree is:
___sys_recvmsg()
  move_addr_to_user()
    audit_sockaddr()
      __audit_sockaddr()
Reported-by: NJüri Aedla <juri.aedla@gmail.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

Included change:
- fix multi soft-interfaces setups with Network Coding enabled by
  registering the CODED packet type once only (instead of once per soft-if)
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sebastian Hesselbarth says:

====================
This patch set comprises some one-liners to fix issues with repeated
loading and unloading of a modular mv643xx_eth driver.

First two patches take care of the periodic port statistic timer, that
updates statistics by reading port registers using add_timer/mod_timer.

Patch 1 moves timer re-schedule from mib_counters_update to the timer
callback. As mib_counters_update is also called from non-timer context,
this ensures the timer is reactivated from timer context only.

Patch 2 moves initial timer schedule from _probe() time to right before
the port is actually started as the corresponding del_timer_sync is at
_stop() time. This fixes a regression, where unloading the driver from a
non-started eth device can cause the timer to access deallocated mem.

Patch 3 adds an assignment of the ports device_node to the corresponding
self-created platform_device. This is required to allow fixups based on
the device_node's compatible string later. Actually, it is also a potential
regression because we already check compatible string for Kirkwood, but
does not (yet) rely on the fixup.

All patches are based on v3.12-rc3 and have been tested on Kirkwood-based
Seagate Dockstar.

Patches 1 and 2 can also possibly queued up for -stable.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

DT-based mv643xx_eth probes and creates platform_devices for the
port devices on its own. To allow fixups for ports based on the
device_node, we need to set .of_node of the corresponding device
with the correct node.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: NJason Cooper <jason@lakedaemon.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The periodic statistics timer gets started at port _probe() time, but
is stopped on _stop() only. In a modular environment, this can cause
the timer to access already deallocated memory, if the module is unloaded
without starting the eth device. To fix this, we add the timer right
before the port is started, instead of at _probe() time.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: NJason Cooper <jason@lakedaemon.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Each port driver installs a periodic timer to update port statistics
by calling mib_counters_update. As mib_counters_update is also called
from non-timer context, we should not reschedule the timer there but
rather move it to timer-only context.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: NJason Cooper <jason@lakedaemon.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IPv4 mapped addresses cause kernel panic.
The patch juste check whether the IPv6 address is an IPv4 mapped
address. If so, use IPv4 API instead of IPv6.

[  940.026915] general protection fault: 0000 [#1]
[  940.026915] Modules linked in: l2tp_ppp l2tp_netlink l2tp_core pppox ppp_generic slhc loop psmouse
[  940.026915] CPU: 0 PID: 3184 Comm: memcheck-amd64- Not tainted 3.11.0+ #1
[  940.026915] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
[  940.026915] task: ffff880007130e20 ti: ffff88000737e000 task.ti: ffff88000737e000
[  940.026915] RIP: 0010:[<ffffffff81333780>]  [<ffffffff81333780>] ip6_xmit+0x276/0x326
[  940.026915] RSP: 0018:ffff88000737fd28  EFLAGS: 00010286
[  940.026915] RAX: c748521a75ceff48 RBX: ffff880000c30800 RCX: 0000000000000000
[  940.026915] RDX: ffff88000075cc4e RSI: 0000000000000028 RDI: ffff8800060e5a40
[  940.026915] RBP: ffff8800060e5a40 R08: 0000000000000000 R09: ffff88000075cc90
[  940.026915] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88000737fda0
[  940.026915] R13: 0000000000000000 R14: 0000000000002000 R15: ffff880005d3b580
[  940.026915] FS:  00007f163dc5e800(0000) GS:ffffffff81623000(0000) knlGS:0000000000000000
[  940.026915] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  940.026915] CR2: 00000004032dc940 CR3: 0000000005c25000 CR4: 00000000000006f0
[  940.026915] Stack:
[  940.026915]  ffff88000075cc4e ffffffff81694e90 ffff880000c30b38 0000000000000020
[  940.026915]  11000000523c4bac ffff88000737fdb4 0000000000000000 ffff880000c30800
[  940.026915]  ffff880005d3b580 ffff880000c30b38 ffff8800060e5a40 0000000000000020
[  940.026915] Call Trace:
[  940.026915]  [<ffffffff81356cc3>] ? inet6_csk_xmit+0xa4/0xc4
[  940.026915]  [<ffffffffa0038535>] ? l2tp_xmit_skb+0x503/0x55a [l2tp_core]
[  940.026915]  [<ffffffff812b8d3b>] ? pskb_expand_head+0x161/0x214
[  940.026915]  [<ffffffffa003e91d>] ? pppol2tp_xmit+0xf2/0x143 [l2tp_ppp]
[  940.026915]  [<ffffffffa00292e0>] ? ppp_channel_push+0x36/0x8b [ppp_generic]
[  940.026915]  [<ffffffffa00293fe>] ? ppp_write+0xaf/0xc5 [ppp_generic]
[  940.026915]  [<ffffffff8110ead4>] ? vfs_write+0xa2/0x106
[  940.026915]  [<ffffffff8110edd6>] ? SyS_write+0x56/0x8a
[  940.026915]  [<ffffffff81378ac0>] ? system_call_fastpath+0x16/0x1b
[  940.026915] Code: 00 49 8b 8f d8 00 00 00 66 83 7c 11 02 00 74 60 49
8b 47 58 48 83 e0 fe 48 8b 80 18 01 00 00 48 85 c0 74 13 48 8b 80 78 02
00 00 <48> ff 40 28 41 8b 57 68 48 01 50 30 48 8b 54 24 08 49 c7 c1 51
[  940.026915] RIP  [<ffffffff81333780>] ip6_xmit+0x276/0x326
[  940.026915]  RSP <ffff88000737fd28>
[  940.057945] ---[ end trace be8aba9a61c8b7f3 ]---
[  940.058583] Kernel panic - not syncing: Fatal exception in interrupt
Signed-off-by: NFrançois CACHEREUL <f.cachereul@alphalink.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit 3ab5aee7 ("net: Convert TCP & DCCP hash tables to use RCU /
hlist_nulls") incorrectly used sock_put() on TIMEWAIT sockets.

We should instead use inet_twsk_put()
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Veaceslav has been doing a significant amount of work on bonding lately and
reached out to me about being a maintainer.  After discussing this with him, I
think he would be a good fit as a bonding maintainer.
Signed-off-by: NAndy Gospodarek <andy@greyhouse.net>
Acked-by: NVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jamal sent patch to add tc user simple actions to iproute2
but required header was not being exported.
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>