This driver uses read_relaxed and writel_relaxed to read, write to IO
memory. the config defines COMPILE_TEST so gets compiled on different archs.
This causes issue as few archs like x86 etc don't define it.
So use readl/writel which is defined in all archs
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

drivers/dma/at_xdmac.c:702:3-4: Unneeded semicolon

 Removes unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

New atmel DMA controller known as XDMAC, introduced with SAMA5D4
devices.
Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

since users have been move to fsl_dma_external_start() API, so remove this
now
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The freescale driver uses custom device control FSLDMA_EXTERNAL_START to
put the controller in external start mode.
Since we are planning to deprecate the device control, move this to exported
API. Subsequent patches will remove the FSLDMA_EXTERNAL_START
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The drivers should use dmaengine_terminate_all() API instead of accessing
the device_control which will be deprecated soon
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

I added book keeping of whether or not the 8250-dma driver has an RX
transfer pending or not so we don't BUG here if it calls
dmaengine_pause() on a channel which has not a pending transfer. Guess
what, this is not enough.
The following can be triggered with a busy RX channel and hackbench in
background:
- DMA transfer completes. The callback is delayed via
  vchan_cookie_complete() into a tasklet so it das not happen asap.
- hackbench keeps the system busy so the tasklet does not run "soon".
- the UART collected enough data and generates an "timeout"-interrupt.
  Since 8250-dma *thinks* the DMA-transfer is still pending it tries to
  cancel it via invoking dmaengine_pause() first. This causes the segfault
  because echan->edesc is NULL now that the transfer completed (however
  the callback did not run yet).

With this patch we don't BUG in the scenario described.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The driver library functions can be used directly by the compound devices such
as ADSP or serial driver where DesignWare DMA IP is privately attached to the
main hardware.

Instead of creating a new platform device leaf they may call dw_dma_probe()
with given struct dw_dma_chip directly and make sure that the main device is
DMA capable.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Enable controller automatically whenever first user requires for a channel and
disable it when the last user gone.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Instead of conditional exporing of dw_dma_suspend() / dw_dma_resume() let's
export dw_dma_disable() / dw_dma_enable(). Since dw_dma_shutdown() repeats
dw_dma_disable() we may safely remove it at all.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

As an opposite to dw_dma_off() let's introduce dw_dma_on() helper. It will be
useful later as well.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The introduced include/linux/dma/dw.h is going to contain the private
extensions and structures which are shared for dw_dmac users in the kernel.
Meanwhile include/linux/platform_data/dma-dw.h keeps only platform related data
types and definitions.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Since we don't allow user to set registers directly through private slave
configuration we may move definitions to the regs.h because they are not used
anywhere except core.c part.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This change uses managed resource APIs to allocate resources such as,
mem, irq in order to simplify the driver unload or failure cases
Signed-off-by: NKiran Padwal <kiran.padwal@smartplayin.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Fix a NULL pointer dereference after unbinding the driver, if channel
resources were not yet allocated (no call to
pl330_alloc_chan_resources()):
$ echo 12850000.mdma > /sys/bus/amba/drivers/dma-pl330/unbind
[   13.606533] DMA pl330_control: removing pch: eeab6800, chan: eeab6814, thread:   (null)
[   13.614472] Unable to handle kernel NULL pointer dereference at virtual address 0000000c
[   13.622537] pgd = ee284000
[   13.625228] [0000000c] *pgd=6e1e4831, *pte=00000000, *ppte=00000000
[   13.631482] Internal error: Oops: 17 [#1] PREEMPT SMP ARM
[   13.636859] Modules linked in:
[   13.639903] CPU: 0 PID: 1 Comm: sh Not tainted 3.17.0-rc3-next-20140904-00004-g7020ffc33ca3-dirty #420
[   13.649187] task: ee80a800 ti: ee888000 task.ti: ee888000
[   13.654589] PC is at _stop+0x8/0x2c8
[   13.658131] LR is at pl330_control+0x70/0x2e8
[   13.662468] pc : [<c0206028>]    lr : [<c020649c>]    psr: 60000093
[   13.662468] sp : ee889e58  ip : 00000001  fp : 000bab70
[   13.673922] r10: eeab6814  r9 : ee16debc  r8 : 00000000
[   13.679131] r7 : eeab685c  r6 : 60000013  r5 : ee16de10  r4 : eeab6800
[   13.685641] r3 : 00000002  r2 : 00000000  r1 : 00010000  r0 : 00000000
[   13.692153] Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
[   13.699357] Control: 10c5387d  Table: 6e28404a  DAC: 00000015
[   13.705085] Process sh (pid: 1, stack limit = 0xee888240)
[   13.710466] Stack: (0xee889e58 to 0xee88a000)
[   13.714808] 9e40:                                                       00000002 eeab6800
[   13.722969] 9e60: ee16de10 eeab6800 ee16de10 60000013 eeab685c c020649c 00000000 c040280c
[   13.731128] 9e80: ee889e80 ee889e80 ee16de18 ee16de10 eeab6880 eeab6814 00200200 eeab68a8
[   13.739287] 9ea0: 00100100 c0208048 00000000 c0409fc4 eea80800 eea808f8 c0605c44 0000000e
[   13.747446] 9ec0: 0000000e eeb3960c eeb39600 c0203c48 eea80800 c0605c44 c0605a8c c023f694
[   13.755605] 9ee0: ee80a800 eea80834 eea80800 c023f704 ee80a800 eea80800 c0605c44 c023e8ec
[   13.763764] 9f00: 0000000e ee149780 ee29e580 ee889f80 ee29e580 c023e19c 0000000e c01167e4
[   13.771923] 9f20: c01167a0 00000000 00000000 c0115e88 00000000 00000000 ee0b1a00 0000000e
[   13.780082] 9f40: b6f48000 ee889f80 0000000e ee888000 b6f48000 c00bfadc 00000000 00000003
[   13.788241] 9f60: 00000000 00000000 00000000 ee0b1a00 ee0b1a00 0000000e b6f48000 c00bfdf4
[   13.796401] 9f80: 00000000 00000000 ffffffff 0000000e b6f48000 b6edc5d0 00000004 c000e7a4
[   13.804560] 9fa0: 00000000 c000e620 0000000e b6f48000 00000001 b6f48000 0000000e 00000000
[   13.812719] 9fc0: 0000000e b6f48000 b6edc5d0 00000004 0000000e b6f4c8c0 000c3470 000bab70
[   13.820879] 9fe0: 00000000 bed2aa50 b6e18bdc b6e6b52c 60000010 00000001 c0c0c0c0 c0c0c0c0
[   13.829058] [<c0206028>] (_stop) from [<c020649c>] (pl330_control+0x70/0x2e8)
[   13.836165] [<c020649c>] (pl330_control) from [<c0208048>] (pl330_remove+0xb0/0xdc)
[   13.843800] [<c0208048>] (pl330_remove) from [<c0203c48>] (amba_remove+0x24/0xc0)
[   13.851272] [<c0203c48>] (amba_remove) from [<c023f694>] (__device_release_driver+0x70/0xc4)
[   13.859685] [<c023f694>] (__device_release_driver) from [<c023f704>] (device_release_driver+0x1c/0x28)
[   13.868971] [<c023f704>] (device_release_driver) from [<c023e8ec>] (unbind_store+0x58/0x90)
[   13.877303] [<c023e8ec>] (unbind_store) from [<c023e19c>] (drv_attr_store+0x20/0x2c)
[   13.885036] [<c023e19c>] (drv_attr_store) from [<c01167e4>] (sysfs_kf_write+0x44/0x48)
[   13.892928] [<c01167e4>] (sysfs_kf_write) from [<c0115e88>] (kernfs_fop_write+0xc0/0x17c)
[   13.901090] [<c0115e88>] (kernfs_fop_write) from [<c00bfadc>] (vfs_write+0xa0/0x1a8)
[   13.908812] [<c00bfadc>] (vfs_write) from [<c00bfdf4>] (SyS_write+0x40/0x8c)
[   13.915850] [<c00bfdf4>] (SyS_write) from [<c000e620>] (ret_fast_syscall+0x0/0x30)
[   13.923392] Code: e5813010 e12fff1e e92d40f0 e24dd00c (e590200c)
[   13.929467] ---[ end trace 10064e15a5929cf8 ]---

Terminate the thread and free channel resource only if channel resources
were allocated (thread is not NULL).
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: <stable@vger.kernel.org>
Fixes: b3040e40 ("DMA: PL330: Add dma api driver")
Reviewed-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

If dma_async_device_register() returns error and probe should clean up
and return error, a NULL pointer exception happens because of
dereference of not allocated channel thread:

Dmesg log (from early printk):
dma-pl330 12680000.pdma: unable to register DMAC
DMA pl330_control: removing pch: eeac4000, chan: eeac4014, thread:   (null)
Unable to handle kernel NULL pointer dereference at virtual address 0000000c
pgd = c0004000
[0000000c] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 3.17.0-rc3-next-20140904-00005-g6cc4c1937d90-dirty #427
task: ee80a800 ti: ee888000 task.ti: ee888000
PC is at _stop+0x8/0x2c8
LR is at pl330_control+0x70/0x2e8
pc : [<c0205dc8>]    lr : [<c020623c>]    psr: 60000193
sp : ee889df8  ip : 00000002  fp : 00000000
r10: eeac4014  r9 : ee0e62bc  r8 : 00000000
r7 : eeac405c  r6 : 60000113  r5 : ee0e6210  r4 : eeac4000
r3 : 00000002  r2 : 00000002  r1 : 00010000  r0 : 00000000
Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c5387d  Table: 4000404a  DAC: 00000015
Process swapper/0 (pid: 1, stack limit = 0xee888240)
Stack: (0xee889df8 to 0xee88a000)
9de0:                                                       00000002 eeac4000
9e00: ee0e6210 eeac4000 ee0e6210 60000113 eeac405c c020623c 00000000 c020725c
9e20: ee889e20 ee889e20 ee0e6210 eeac4080 00200200 00100100 eeac4014 00000020
9e40: ee0e6218 c0208374 00000000 ee9bb340 ee0e6210 00000000 00000000 c0605cd8
9e60: ee970000 c0605c84 ee9700f8 00000000 c05c4270 00000000 00000000 c0203b3c
9e80: ee970000 c06624a8 00000000 c0605c84 00000000 c023f890 ee970000 c0605c84
9ea0: ee970034 00000000 c05b23d0 c023fa3c 00000000 c0605c84 c023f9b0 c023e0d4
9ec0: ee947e78 ee9b9440 c0605c84 eea1e780 c0605acc c023f094 c0513b50 c0605c84
9ee0: c05ecbd8 c0605c84 c05ecbd8 ee11ba40 c0626500 c0240064 00000000 c05ecbd8
9f00: c05ecbd8 c0008964 c040f13c 0000009f c0626500 c057465c ee80a800 60000113
9f20: 00000000 c05efdb0 60000113 00000000 ef7fc89d c0421168 0000008f c003787c
9f40: c0573d6c 00000006 ef7fc8bb 00000006 c05efd50 ef7fc800 c05dfbc4 00000006
9f60: c05c4264 c0626500 0000008f c05c4270 c059b518 c059bcb4 00000006 00000006
9f80: c059b518 c003c08c 00000000 c040091c 00000000 00000000 00000000 00000000
9fa0: 00000000 c0400924 00000000 c000e7b8 00000000 00000000 00000000 00000000
9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 c0c0c0c0 c0c0c0c0
[<c0205dc8>] (_stop) from [<c020623c>] (pl330_control+0x70/0x2e8)
[<c020623c>] (pl330_control) from [<c0208374>] (pl330_probe+0x594/0x75c)
[<c0208374>] (pl330_probe) from [<c0203b3c>] (amba_probe+0xb8/0x120)
[<c0203b3c>] (amba_probe) from [<c023f890>] (driver_probe_device+0x10c/0x22c)
[<c023f890>] (driver_probe_device) from [<c023fa3c>] (__driver_attach+0x8c/0x90)
[<c023fa3c>] (__driver_attach) from [<c023e0d4>] (bus_for_each_dev+0x54/0x88)
[<c023e0d4>] (bus_for_each_dev) from [<c023f094>] (bus_add_driver+0xd4/0x1d0)
[<c023f094>] (bus_add_driver) from [<c0240064>] (driver_register+0x78/0xf4)
[<c0240064>] (driver_register) from [<c0008964>] (do_one_initcall+0x80/0x1d0)
[<c0008964>] (do_one_initcall) from [<c059bcb4>] (kernel_init_freeable+0x108/0x1d4)
[<c059bcb4>] (kernel_init_freeable) from [<c0400924>] (kernel_init+0x8/0xec)
[<c0400924>] (kernel_init) from [<c000e7b8>] (ret_from_fork+0x14/0x3c)
Code: e5813010 e12fff1e e92d40f0 e24dd00c (e590200c)
---[ end trace c94b2f4f38dff3bf ]---

This happens because the necessary resources were not yet allocated - no
call to pl330_alloc_chan_resources().

Terminate the thread and free channel resource only if channel thread is not NULL.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: <stable@vger.kernel.org>
Fixes: 0b94c577 ("DMA: PL330: Add check if device tree compatible")
Reviewed-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The 'void __iomem *regs' is not used in pl330_submit_req() function.
Remove it.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The pl330_submit_req() checked supplied 'struct pl330_thread thrd' and
'struct dma_pl330_desc desc' parameters for non-NULL. However these
checks are useless because supplied arguments won't be NULL.

The pl330_submit_req() is called in only one place and:
1. 'desc' is already dereferenced in fill_queue() before calling
   pl330_submit_req().
2. 'thrd' is always dereferenced after calling
   fill_queue()->pl330_submit_req().

Removing the checks for non-NULL values fixes following warning:
drivers/dma/pl330.c:1376 pl330_submit_req() warn: variable dereferenced before check 'thrd' (see line 1367)
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

In e34b731f ("dma: imx-sdma: Remove spurious __init annotation on
sdma_probe()"), Mark found an extraneous __init label and fixed it.

However, he missed another one, because now we get this other warning:

WARNING: drivers/dma/imx-sdma.o(.text+0x3bb4): Section mismatch in reference from the function sdma_probe() to the function .init.text:sdma_get_firmware()
The function sdma_probe() references
the function __init sdma_get_firmware().

Same reasoning as the last time, the function may get called at
runtime, so it can't be __init.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Per commit "77873803 net_dma: mark broken" net_dma is no longer used
and there is no plan to fix it.

This is the mechanical removal of bits in CONFIG_NET_DMA ifdef guards.
Reverting the remainder of the net_dma induced changes is deferred to
subsequent patches.

Marked for stable due to Roman's report of a memory leak in
dma_pin_iovec_pages():

    https://lkml.org/lkml/2014/9/3/177

Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: David Whipple <whipple@securedatainnovations.ch>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: <stable@vger.kernel.org>
Reported-by: NRoman Gushchin <klamm@yandex-team.ru>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

The sun6i DMA controller requires the AHB1 bus clock to be
clocked from PLL6. This was originally done by the dmaengine
driver during probe time. The AHB1 clock driver has since been
unified, so the original code does not work.

Remove the clk muxing code, and replace it with DT clk default
properties.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

MX6 processors also use the IMX_SDMA driver, so include it in the help text.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

When we fail to allocate memory for thread->srcs or thread->dsts and src_cnt or
dst_cnt great than 1 we leak memory on error path. This patch fixes the issue.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The driver is capable of supporting DMA_INTERRUPT by issuing a dummy 128-byte
transfer. This helps removing a poll in the async_tx stack, replacing it with
a completion interrupt.
Signed-off-by: NLior Amsalem <alior@marvell.com>
Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The driver currently defines the USE_TIMER macro, but the timer-feature
is never used in the code. The XOR and CRC32 results are never used.

The 'unmap_xxx' fields are no longer needed, they were made obsolete
in commit: 54f8d501 dmaengine: remove DMA unmap from drivers.

Let's remove all this dead code.
Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This commit unmasks the end-of-chain interrupt and removes the
end-of-descriptor command setting on all transactions, except those
explicitly flagged with DMA_PREP_INTERRUPT.

This allows to raise an interrupt only on chain completion, instead of
on each descriptor completion, which reduces interrupt count.
Signed-off-by: NLior Amsalem <alior@marvell.com>
Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This commit replaces the current magic numbers in the interrupt handling
with proper macros, which makes more readable and self-documenting.

While here replace the BUG() with a noisy WARN_ON(). There's no reason
to tear down the entire system for an DMA IRQ error.
Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Although the driver supported multiple-slot allocation, only one slot was
ever allocated for each transaction. So, given we have no users of the
multi-slot support, we can remove it and greatly simplify the code.
Signed-off-by: NLior Amsalem <alior@marvell.com>
Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

A memory copy operation can be expressed as an XOR operation with one
source. This commit removes code duplication in the driver by reusing
the XOR operation for the MEMCPY.

As an added benefit, we can now put MEMCPY and XOR descriptors on the
same chain, which improves performance.
Signed-off-by: NLior Amsalem <alior@marvell.com>
Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This commit replaces a printk(KERN_INFO ...) call with a dev_info() call,
which is prefered for drivers.
Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

When the audio stream is paused or suspended we stop the sDMA and when it
is unpaused/resumed we start the channel without reconfiguring it.
The omap_dma_stop() clears the link configuration when we pause the dma, but
it is not setting it back on start. This will result only one audio buffer
to be played back and the DMA will stop, since the linking is disabled.
We need to restore the CLINK_CTRL register in case of resume.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Add mb() call to resume path to ensure the necessary barrier.
Resume can happen after waking up from suspend for example.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Braswell SoC has two DMA controllers for LPSS. This patch adds them to
supported list in the PCI driver.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

On BayTrail platform DMA is not functional in the PCI mode, whereby it always
failed and exit at the point when it tries to get a clock. It causes the PCI
mode probe to exit with the error message:
	dw_dmac_pci: probe of 0000:00:1e.0 failed with error -2

This patch moves clock operations to where it belongs to. Thus, the clock is
provided only in ACPI / non-PCI cases.
Reported-by: NChew, Chiau Ee <chiau.ee.chew@intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The introduced filter function would be reused in the ACPI and DT cases since
in those cases we have to apply mandatory data to the requested channel. Thus,
patch moves platform driver to use it in that case.

The function unlikely can't be used by users of the driver due to an implicit
dependency to the dw_dmac_core module.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Instead of one request line member let's use both source and destination ones.
Usually we have no such hardware except Atmel MMC controller found on AVR32
platform (see arch/avr32/mach-at32ap/at32ap700x.c and
drivers/mmc/host/atmel-mci.c).

This patch removes slave_id usage since it'll be removed from the generic
structure in later. This breaks the non-ACPI / non-DT cases for the users of
the driver, i.e. SPI and HSUART. However, these cases mean only PCI enumerated
devices for now, which is anyway broken (considering more than one DMA
controller in the system) and this patch series is intended to fix that
eventually.

The ACPI and DT cases shall be aware of the channel direction when setting
request lines, but this is a minor problem that would be addressed in future.
Suggested-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Instead of exposing the possibility to set DMA registers CFG_HI and CFG_LO
strict user to provide handshake interfaces explicitly.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NHans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

There is a common storage for platform data related structures and definitions
inside kernel source tree. The patch moves file from include/linux to
include/linux/platform_data and renames it acoordingly. The users are also
updated.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
[For the arch/avr32/.* and .*sound/atmel.*]
Acked-by: NHans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

We need to make sure to deqeueue the descriptor from the active list before
we call vchan_cookie_complete(). Also we need obviously only set chan->desc
to NULL after we stopped using it.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

add DMA_PREP_INTERRUPT flag to support no_period_wakeup, in which
user space app doesn't want audio interrupt to wake up audio threads.
Signed-off-by: NQiao Zhou <zhouqiao@marvell.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>