- 03 10月, 2018 3 次提交
-
-
由 Jakub Kicinski 提交于
When FW floods the driver with control messages try to exit the cmsg processing loop every now and then to avoid soft lockups. Cmsg processing is generally very lightweight so 512 seems like a reasonable budget, which should not be exceeded under normal conditions. Fixes: 77ece8d5 ("nfp: add control vNIC datapath") Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NSimon Horman <simon.horman@netronome.com> Tested-by: NPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maciej W. Rozycki 提交于
Fix a commit 4bcc595c ("printk: reinstate KERN_CONT for printing continuation lines") regression with the `declance' driver, which caused the adapter identification message to be split between two lines, e.g.: declance.c: v0.011 by Linux MIPS DECstation task force tc6: PMAD-AA , addr = 08:00:2b:1b:2a:6a, irq = 14 tc6: registered as eth0. Address that properly, by printing identification with a single call, making the messages now look like: declance.c: v0.011 by Linux MIPS DECstation task force tc6: PMAD-AA, addr = 08:00:2b:1b:2a:6a, irq = 14 tc6: registered as eth0. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Fixes: 4bcc595c ("printk: reinstate KERN_CONT for printing continuation lines") Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rickard x Andersson 提交于
During certain heavy network loads TX could time out with TX ring dump. TX is sometimes never restarted after reaching "tx_stop_threshold" because function "fec_enet_tx_queue" only tests the first queue. In addition the TX timeout callback function failed to recover because it also operated only on the first queue. Signed-off-by: NRickard x Andersson <rickaran@axis.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 10月, 2018 4 次提交
-
-
由 Heiner Kallweit 提交于
Some of the chip-specific hw_start functions set bit TXCFG_AUTO_FIFO in register TxConfig. The original patch changed the order of some calls resulting in these changes being overwritten by rtl_set_tx_config_registers() in rtl_hw_start(). This eventually resulted in network stalls especially under high load. Analyzing the chip-specific hw_start functions all chip version from 34, with the exception of version 39, need this bit set. This patch moves setting this bit to rtl_set_tx_config_registers(). Fixes: 4fd48c4a ("r8169: move common initializations to tp->hw_start") Reported-by: NOrtwin Glück <odi@odi.ch> Reported-by: NDavid Arendt <admin@prnet.org> Root-caused-by: NMaciej S. Szmigiero <mail@maciej.szmigiero.name> Tested-by: NTony Atkinson <tatkinson@linux.com> Tested-by: NDavid Arendt <admin@prnet.org> Tested-by: NOrtwin Glück <odi@odi.ch> Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Since tun->flags might be shared by multiple tfile structures, it is better to make sure tun_get_user() is using the flags for the current tfile. Presence of the READ_ONCE() in tun_napi_frags_enabled() gave a hint of what could happen, but we need something stronger to please syzbot. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 13647 Comm: syz-executor5 Not tainted 4.19.0-rc5+ #59 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:dev_gro_receive+0x132/0x2720 net/core/dev.c:5427 Code: 48 c1 ea 03 80 3c 02 00 0f 85 6e 20 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 6e 10 49 8d bd d0 00 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 59 20 00 00 4d 8b a5 d0 00 00 00 31 ff 41 81 e4 RSP: 0018:ffff8801c400f410 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff8618d325 RDX: 000000000000001a RSI: ffffffff86189f97 RDI: 00000000000000d0 RBP: ffff8801c400f608 R08: ffff8801c8fb4300 R09: 0000000000000000 R10: ffffed0038801ed7 R11: 0000000000000003 R12: ffff8801d327d358 R13: 0000000000000000 R14: ffff8801c16dd8c0 R15: 0000000000000004 FS: 00007fe003615700(0000) GS:ffff8801dac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe1f3c43db8 CR3: 00000001bebb2000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: napi_gro_frags+0x3f4/0xc90 net/core/dev.c:5715 tun_get_user+0x31d5/0x42a0 drivers/net/tun.c:1922 tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:1967 call_write_iter include/linux/fs.h:1808 [inline] new_sync_write fs/read_write.c:474 [inline] __vfs_write+0x6b8/0x9f0 fs/read_write.c:487 vfs_write+0x1fc/0x560 fs/read_write.c:549 ksys_write+0x101/0x260 fs/read_write.c:598 __do_sys_write fs/read_write.c:610 [inline] __se_sys_write fs/read_write.c:607 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:607 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457579 Code: 1d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fe003614c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457579 RDX: 0000000000000012 RSI: 0000000020000000 RDI: 000000000000000a RBP: 000000000072c040 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0036156d4 R13: 00000000004c5574 R14: 00000000004d8e98 R15: 00000000ffffffff Modules linked in: RIP: 0010:dev_gro_receive+0x132/0x2720 net/core/dev.c:5427 Code: 48 c1 ea 03 80 3c 02 00 0f 85 6e 20 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 6e 10 49 8d bd d0 00 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 59 20 00 00 4d 8b a5 d0 00 00 00 31 ff 41 81 e4 RSP: 0018:ffff8801c400f410 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff8618d325 RDX: 000000000000001a RSI: ffffffff86189f97 RDI: 00000000000000d0 RBP: ffff8801c400f608 R08: ffff8801c8fb4300 R09: 0000000000000000 R10: ffffed0038801ed7 R11: 0000000000000003 R12: ffff8801d327d358 R13: 0000000000000000 R14: ffff8801c16dd8c0 R15: 0000000000000004 FS: 00007fe003615700(0000) GS:ffff8801dac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe1f3c43db8 CR3: 00000001bebb2000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 90e33d45 ("tun: enable napi_gro_frags() for TUN/TAP driver") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: Nsyzbot <syzkaller@googlegroups.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
This is the first part to fix following syzbot report : console output: https://syzkaller.appspot.com/x/log.txt?x=145378e6400000 kernel config: https://syzkaller.appspot.com/x/.config?x=443816db871edd66 dashboard link: https://syzkaller.appspot.com/bug?extid=e662df0ac1d753b57e80 Following patch is fixing the race condition, but it seems safer to initialize this mutex at tfile creation anyway. Fixes: 90e33d45 ("tun: enable napi_gro_frags() for TUN/TAP driver") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: syzbot+e662df0ac1d753b57e80@syzkaller.appspotmail.com Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
tun_napi_disable() and tun_napi_del() do not need a pointer to the tun_struct Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 9月, 2018 9 次提交
-
-
由 Hans de Goede 提交于
Disable the clk during suspend to save power. Note that tp->clk may be NULL, the clk core functions handle this without problems. Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: NCarlo Caione <carlo@endlessm.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
In regular NIC transmission flow, driver always configures MAC using Tx queue zero descriptor as a part of MAC learning flow. But with multi Tx queue supported NIC, regular transmission can occur on any non-zero Tx queue and from that context it uses Tx queue zero descriptor to configure MAC, at the same time TX queue zero could be used by another CPU for regular transmission which could lead to Tx queue zero descriptor corruption and cause FW abort. This patch fixes this in such a way that driver always configures learned MAC address from the same Tx queue which is used for regular transmission. Fixes: 7e2cf4fe ("qlcnic: change driver hardware interface mechanism") Signed-off-by: NShahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
The driver does not check for Wake-on-LAN modes specified by an user, but will conditionally set the device as wake-up enabled or not based on that, which could be a very confusing user experience. Fixes: e0e474a8 ("smsc95xx: add wol magic packet support") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
The driver does not check for Wake-on-LAN modes specified by an user, but will conditionally set the device as wake-up enabled or not based on that, which could be a very confusing user experience. Fixes: 6c636503 ("smsc75xx: add wol magic packet support") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
The driver does not check for Wake-on-LAN modes specified by an user, but will conditionally set the device as wake-up enabled or not based on that, which could be a very confusing user experience. Fixes: 21ff2e89 ("r8152: support WOL") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
The driver currently silently accepts unsupported Wake-on-LAN modes (other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user, which is confusing. Fixes: 19a38d8e ("USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
The driver supports a fair amount of Wake-on-LAN modes, but is not checking that the user specified one that is supported. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NWoojung Huh <Woojung.Huh@Microchip.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
The driver currently silently accepts unsupported Wake-on-LAN modes (other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user, which is confusing. Fixes: e2ca90c2 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
The driver currently silently accepts unsupported Wake-on-LAN modes (other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user, which is confusing. Fixes: 2e55cc72 ("[PATCH] USB: usbnet (3/9) module for ASIX Ethernet adapters") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 9月, 2018 13 次提交
-
-
由 Eric Dumazet 提交于
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ibmvnic uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. ibmvnic_netpoll_controller() was completely wrong anyway, as it was scheduling NAPI to service RX queues (instead of TX), so I doubt netpoll ever worked on this driver. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Cc: John Allen <jallen@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. sfc-falcon uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com> Cc: Edward Cree <ecree@solarflare.com> Cc: Bert Kenward <bkenward@solarflare.com> Acked-By: NBert Kenward <bkenward@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. sfc uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Edward Cree <ecree@solarflare.com> Cc: Bert Kenward <bkenward@solarflare.com> Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com> Acked-By: NBert Kenward <bkenward@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ena uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Netanel Belgazal <netanel@amazon.com> Cc: Saeed Bishara <saeedb@amazon.com> Cc: Zorik Machulsky <zorik@amazon.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. netxen uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Manish Chopra <manish.chopra@cavium.com> Cc: Rahul Verma <rahul.verma@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. qlcnic uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Harish Patil <harish.patil@cavium.com> Cc: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. virto_net uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. hns uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Cc: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ehea uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Douglas Miller <dougmill@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. hinic uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Note that hinic_netpoll() was incorrectly scheduling NAPI on both RX and TX queues. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sudarsana Reddy Kalluru 提交于
The structure shared between driver and the management FW (mfw) differ in sizes. This would lead to issues when driver try to access the structure members which are not-aligned with the mfw copy e.g., data_ptr usage in the case of mfw_tlv request. Align the driver structure with mfw copy, add reserved field(s) to driver structure for the members not used by the driver. Fixes: dd006921 ("qed: Add MFW interfaces for TLV request support.) Signed-off-by: NSudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: NMichal Kalderon <Michal.Kalderon@cavium.com>
-
由 Jean Delvare 提交于
Functions qeth_get_ipa_msg and qeth_get_ipa_cmd_name are modifying the last member of global arrays without any locking that I can see. If two instances of either function are running at the same time, it could cause a race ultimately leading to an array overrun (the contents of the last entry of the array is the only guarantee that the loop will ever stop). Performing the lookups without modifying the arrays is admittedly slower (two comparisons per iteration instead of one) but these are operations which are rare (should only be needed in error cases or when debugging, not during successful operation) and it seems still less costly than introducing a mutex to protect the arrays in question. As a side bonus, it allows us to declare both arrays as const data. Signed-off-by: NJean Delvare <jdelvare@suse.de> Cc: Julian Wiedmann <jwi@linux.ibm.com> Cc: Ursula Braun <ubraun@linux.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 zhong jiang 提交于
Use the common code ARRAY_SIZE macro instead of a private implementation. Reviewed-by: NJean Delvare <jdelvare@suse.de> Signed-off-by: Nzhong jiang <zhongjiang@huawei.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 9月, 2018 11 次提交
-
-
由 Xue Liu 提交于
The combination of defined constants are used to present the state of IRQ so the magic numbers has been replaced. This is a simple coding style change which should have no impact on runtime code execution. Signed-off-by: NXue Liu <liuxuenetmail@gmail.com> Signed-off-by: NStefan Schmidt <stefan@datenfreihafen.org>
-
由 zhong jiang 提交于
debugfs_remove has taken the IS_ERR into account. Just remove the unnecessary condition. Signed-off-by: Nzhong jiang <zhongjiang@huawei.com> Signed-off-by: NStefan Schmidt <stefan@datenfreihafen.org>
-
由 Michael Chan 提交于
The current netpoll implementation in the bnxt_en driver has problems that may miss TX completion events. bnxt_poll_work() in effect is only handling at most 1 TX packet before exiting. In addition, there may be in flight TX completions that ->poll() may miss even after we fix bnxt_poll_work() to handle all visible TX completions. netpoll may not call ->poll() again and HW may not generate IRQ because the driver does not ARM the IRQ when the budget (0 for netpoll) is reached. We fix it by handling all TX completions and to always ARM the IRQ when we exit ->poll() with 0 budget. Also, the logic to ACK the completion ring in case it is almost filled with TX completions need to be adjusted to take care of the 0 budget case, as discussed with Eric Dumazet <edumazet@google.com> Reported-by: NSong Liu <songliubraving@fb.com> Reviewed-by: NSong Liu <songliubraving@fb.com> Tested-by: NSong Liu <songliubraving@fb.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hangbin Liu 提交于
When add vxlan ttl inherit support, I forgot to fill it when dump vlxan info. Fix it now. Fixes: 72f6d71e ("vxlan: add ttl inherit support") Signed-off-by: NHangbin Liu <liuhangbin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Lunn 提交于
A HWMON device is only registered is the SFP module supports the diagnostic page and is complient to SFF8472. Don't unconditionally unregister the hwmon device when the SFP module is remove, otherwise we access data structures which don't exist. Reported-by: NFlorian Fainelli <f.fainelli@gmail.com> Fixes: 1323061a ("net: phy: sfp: Add HWMON support for module sensors") Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Tested-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nathan Chancellor 提交于
Clang warns when one enumerated type is implicitly converted to another. drivers/net/ethernet/qlogic/qed/qed_iwarp.c:1713:25: warning: implicit conversion from enumeration type 'enum tcp_ip_version' to different enumeration type 'enum qed_tcp_ip_version' [-Wenum-conversion] cm_info->ip_version = TCP_IPV4; ~ ^~~~~~~~ drivers/net/ethernet/qlogic/qed/qed_iwarp.c:1733:25: warning: implicit conversion from enumeration type 'enum tcp_ip_version' to different enumeration type 'enum qed_tcp_ip_version' [-Wenum-conversion] cm_info->ip_version = TCP_IPV6; ~ ^~~~~~~~ 2 warnings generated. Use the appropriate values from the expected type, qed_tcp_ip_version: TCP_IPV4 = QED_TCP_IPV4 = 0 TCP_IPV6 = QED_TCP_IPV6 = 1 Link: https://github.com/ClangBuiltLinux/linux/issues/125Signed-off-by: NNathan Chancellor <natechancellor@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nathan Chancellor 提交于
Clang warns when a constant is used in a boolean context as it thinks a bitwise operation may have been intended. drivers/net/ethernet/qlogic/qed/qed_vf.c:415:27: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand] if (!p_iov->b_pre_fp_hsi && ^ drivers/net/ethernet/qlogic/qed/qed_vf.c:415:27: note: use '&' for a bitwise operation if (!p_iov->b_pre_fp_hsi && ^~ & drivers/net/ethernet/qlogic/qed/qed_vf.c:415:27: note: remove constant to silence this warning if (!p_iov->b_pre_fp_hsi && ~^~ 1 warning generated. This has been here since commit 1fe614d1 ("qed: Relax VF firmware requirements") and I am not entirely sure why since 0 isn't a special case. Just remove the statement causing Clang to warn since it isn't required. Link: https://github.com/ClangBuiltLinux/linux/issues/126Signed-off-by: NNathan Chancellor <natechancellor@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mahesh Bandewar 提交于
Syzkaller reported this on a slightly older kernel but it's still applicable to the current kernel - ====================================================== WARNING: possible circular locking dependency detected 4.18.0-next-20180823+ #46 Not tainted ------------------------------------------------------ syz-executor4/26841 is trying to acquire lock: 00000000dd41ef48 ((wq_completion)bond_dev->name){+.+.}, at: flush_workqueue+0x2db/0x1e10 kernel/workqueue.c:2652 but task is already holding lock: 00000000768ab431 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:77 [inline] 00000000768ab431 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x412/0xc30 net/core/rtnetlink.c:4708 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (rtnl_mutex){+.+.}: __mutex_lock_common kernel/locking/mutex.c:925 [inline] __mutex_lock+0x171/0x1700 kernel/locking/mutex.c:1073 mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1088 rtnl_lock+0x17/0x20 net/core/rtnetlink.c:77 bond_netdev_notify drivers/net/bonding/bond_main.c:1310 [inline] bond_netdev_notify_work+0x44/0xd0 drivers/net/bonding/bond_main.c:1320 process_one_work+0xc73/0x1aa0 kernel/workqueue.c:2153 worker_thread+0x189/0x13c0 kernel/workqueue.c:2296 kthread+0x35a/0x420 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 -> #1 ((work_completion)(&(&nnw->work)->work)){+.+.}: process_one_work+0xc0b/0x1aa0 kernel/workqueue.c:2129 worker_thread+0x189/0x13c0 kernel/workqueue.c:2296 kthread+0x35a/0x420 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 -> #0 ((wq_completion)bond_dev->name){+.+.}: lock_acquire+0x1e4/0x4f0 kernel/locking/lockdep.c:3901 flush_workqueue+0x30a/0x1e10 kernel/workqueue.c:2655 drain_workqueue+0x2a9/0x640 kernel/workqueue.c:2820 destroy_workqueue+0xc6/0x9d0 kernel/workqueue.c:4155 __alloc_workqueue_key+0xef9/0x1190 kernel/workqueue.c:4138 bond_init+0x269/0x940 drivers/net/bonding/bond_main.c:4734 register_netdevice+0x337/0x1100 net/core/dev.c:8410 bond_newlink+0x49/0xa0 drivers/net/bonding/bond_netlink.c:453 rtnl_newlink+0xef4/0x1d50 net/core/rtnetlink.c:3099 rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4711 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4729 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343 netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:632 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2115 __sys_sendmsg+0x11d/0x290 net/socket.c:2153 __do_sys_sendmsg net/socket.c:2162 [inline] __se_sys_sendmsg net/socket.c:2160 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2160 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Chain exists of: (wq_completion)bond_dev->name --> (work_completion)(&(&nnw->work)->work) --> rtnl_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock((work_completion)(&(&nnw->work)->work)); lock(rtnl_mutex); lock((wq_completion)bond_dev->name); *** DEADLOCK *** 1 lock held by syz-executor4/26841: stack backtrace: CPU: 1 PID: 26841 Comm: syz-executor4 Not tainted 4.18.0-next-20180823+ #46 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 print_circular_bug.isra.34.cold.55+0x1bd/0x27d kernel/locking/lockdep.c:1222 check_prev_add kernel/locking/lockdep.c:1862 [inline] check_prevs_add kernel/locking/lockdep.c:1975 [inline] validate_chain kernel/locking/lockdep.c:2416 [inline] __lock_acquire+0x3449/0x5020 kernel/locking/lockdep.c:3412 lock_acquire+0x1e4/0x4f0 kernel/locking/lockdep.c:3901 flush_workqueue+0x30a/0x1e10 kernel/workqueue.c:2655 drain_workqueue+0x2a9/0x640 kernel/workqueue.c:2820 destroy_workqueue+0xc6/0x9d0 kernel/workqueue.c:4155 __alloc_workqueue_key+0xef9/0x1190 kernel/workqueue.c:4138 bond_init+0x269/0x940 drivers/net/bonding/bond_main.c:4734 register_netdevice+0x337/0x1100 net/core/dev.c:8410 bond_newlink+0x49/0xa0 drivers/net/bonding/bond_netlink.c:453 rtnl_newlink+0xef4/0x1d50 net/core/rtnetlink.c:3099 rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4711 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4729 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343 netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:632 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2115 __sys_sendmsg+0x11d/0x290 net/socket.c:2153 __do_sys_sendmsg net/socket.c:2162 [inline] __se_sys_sendmsg net/socket.c:2160 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2160 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457089 Code: fd b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f2df20a5c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f2df20a66d4 RCX: 0000000000457089 RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003 RBP: 0000000000930140 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000004d40b8 R14: 00000000004c8ad8 R15: 0000000000000001 Signed-off-by: NMahesh Bandewar <maheshb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mahesh Bandewar 提交于
Commit b89f04c6 ("bonding: deliver link-local packets with skb->dev set to link that packets arrived on") changed the behavior of how link-local-multicast packets are processed. The change in the behavior broke some legacy use cases where these packets are expected to arrive on bonding master device also. This patch passes the packet to the stack with the link it arrived on as well as passes to the bonding-master device to preserve the legacy use case. Fixes: b89f04c6 ("bonding: deliver link-local packets with skb->dev set to link that packets arrived on") Reported-by: NMichal Soltys <soltys@ziu.info> Signed-off-by: NMahesh Bandewar <maheshb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nathan Chancellor 提交于
Clang warns when one enumerated type is implicitly converted to another. drivers/net/ethernet/qlogic/qed/qed_roce.c:153:12: warning: implicit conversion from enumeration type 'enum roce_mode' to different enumeration type 'enum roce_flavor' [-Wenum-conversion] flavor = ROCE_V2_IPV6; ~ ^~~~~~~~~~~~ drivers/net/ethernet/qlogic/qed/qed_roce.c:156:12: warning: implicit conversion from enumeration type 'enum roce_mode' to different enumeration type 'enum roce_flavor' [-Wenum-conversion] flavor = MAX_ROCE_MODE; ~ ^~~~~~~~~~~~~ 2 warnings generated. Use the appropriate values from the expected type, roce_flavor: ROCE_V2_IPV6 = RROCE_IPV6 = 2 MAX_ROCE_MODE = MAX_ROCE_FLAVOR = 3 While we're add it, ditch the local variable flavor, we can just return the value directly from the switch statement. Link: https://github.com/ClangBuiltLinux/linux/issues/125Signed-off-by: NNathan Chancellor <natechancellor@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nathan Chancellor 提交于
Clang complains when one enumerated type is implicitly converted to another. drivers/net/ethernet/qlogic/qed/qed_vf.c:686:6: warning: implicit conversion from enumeration type 'enum qed_tunn_mode' to different enumeration type 'enum qed_tunn_clss' [-Wenum-conversion] QED_MODE_L2GENEVE_TUNN, ^~~~~~~~~~~~~~~~~~~~~~ Update mask's parameter to expect qed_tunn_mode, which is what was intended. Link: https://github.com/ClangBuiltLinux/linux/issues/125Signed-off-by: NNathan Chancellor <natechancellor@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-