Btrfs does bio submissions from a worker thread, and each device
has a list of high priority bios and regular priority bios.

Synchronous writes go to the high priority thread while async writes
go to regular list.  This commit brings back an explicit unplug
any time we switch from high to regular priority, which makes it
easier for the block layer to give us low latencies.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

When doing a writepage we call writepages to try and write out any other dirty
pages in the area.  This could cause problems where we commit a transaction and
then have somebody else dirtying metadata in the area as we could end up writing
out a lot more than we care about, which could cause latency on anybody who is
waiting for the transaction to completely finish committing.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The variable 'last_index' is calculated in the __btrfs_buffered_write
function and passed as a parameter to the prepare_pages function,
but is not used anywhere in the prepare_pages function.

Remove instances of 'last_index' in these functions.
Signed-off-by: NMitch Harder <mitch.harder@sabayonlinux.org>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

find_first_extent_bit() and find_first_extent_bit_state() share
most of the code, and we can just make the former call the latter.
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

We can just use cond_resched_lock().
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Don't duplicate set_state_bits().
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

These members are not used at all.
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

unpin_extent_cache() and add_extent_mapping() shares the same code
that merges extent maps.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

lookup_extent_map() and search_extent_map() can share most of code.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

rb_node returned by __tree_search() can be a valid pointer or NULL,
but won't be some errno.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

When we search a dir item with a specific hash code, we can
just return NULL without further checking if btrfs_search_slot()
returns 1.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

So there's no overhead for something we don't use.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Since commit f2a97a9d
("btrfs: remove all unused functions"), there's no extern functions
at all in ref-cache.c, so just remove the remaining dead code.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

wait_for_commit() always returns 0.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Use wait_event() when possible to avoid code duplication.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

If mounting with nodatasum option, we won't csum file data for
general write or direct-io write, and this rule should also be
applied when writing compressed files.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Memory areas [ptr, ptr+total_len] and [name, name+total_len]
may overlap, so it's wrong to use memcpy().
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

In __btrfs_free_extent we will print the leaf if we fail to find the extent we
wanted, but the problem is if we get an error we won't have a leaf so often this
leads to a NULL pointer dereference and we lose the error that actually
occurred.  So only print the leaf if ret > 0, which means we didn't find the
item we were looking for but we didn't error either.  This way the error is
preserved.
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This is fairly trivial - btrfs_set_root_node() - always returns zero so we
can just make it void.  All callers ignore the return code now anyway.  I
also made sure to check that none of the functions that
btrfs_set_root_node() calls returns an error that we might have needed to
catch and pass back.
Signed-off-by: NMark Fasheh <mfasheh@suse.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Here I have a two SSD-partitions btrfs, and they are defaultly set to
"data=raid0, metadata=raid1", then I try to fill my btrfs partition
till "No space left on device", via "dd if=/dev/zero of=/mnt/btrfs/tmp".

I get an oops panic from kernel BUG at fs/btrfs/extent-tree.c:5199!, which
refers to find_free_extent's
BUG_ON(index != get_block_group_index(block_group));

In SSD mode, in order to find enough space to alloc, we may check the
block_group cache which has been checked sometime before, but the index is not
updated, where it hits the BUG_ON.
Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com>
Acked-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The access for ro in btrfs_block_group_cache should be protected
because of the racy lock in relocation.
Signed-off-by: NWu Bo <wu.bo@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The set/clear bit and the extent split/merge hooks only ever return 0.

 Changing them to return void simplifies the error handling cases later.

 This patch changes the hook prototypes, the single implementation of each,
 and the functions that call them to return void instead.

 Since all four of these hooks execute under a spinlock, they're necessarily
 simple.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

We passed the wrong value to btrfs_force_ra(). Fix this by changing
the argument of btrfs_force_ra() from last_index to nr_page.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

When btrfs_unlink_inode() and btrfs_orphan_add() in btrfs_unlink()
are error, the error code is returned to the caller instead of
BUG_ON().
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Don't need to check the return value of __btrfs_add_inode_defrag(),
since it will always return 0.
Signed-off-by: NWanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Merge branch 'alloc_path' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/btrfs-error-handling into for-linus

The btrfs transaction code will return any errors that come from
reserve_metadata_bytes.  We need to make sure we don't return funny
things like 1 or EAGAIN.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Now that we are using regular file crcs for the free space cache,
we can deadlock if we try to read the free_space_inode while we are
updating the crc tree.

This commit fixes things by using the commit_root to read the crcs.  This is
safe because we the free space cache file would already be loaded if
that block group had been changed in the current transaction.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

For metadata buffers that don't straddle pages (all of them), btrfs
can safely use the page uptodate bits and extent_buffer uptodate bit
instead of needing to use the extent_state tree.

This greatly reduces contention on the state tree lock.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Before the reader/writer locks, btrfs_next_leaf needed to keep
the path blocking to avoid making lockdep upset.

Now that btrfs_next_leaf only takes read locks, this isn't required.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch was originally from Tejun Heo.  lockdep complains about the btrfs
locking because we sometimes take btree locks from two different trees at the
same time.  The current classes are based only on level in the btree, which
isn't enough information for lockdep to figure out if the lock is safe.

This patch makes a class for each type of tree, and lumps all the FS trees that
actually have files and directories into the same class.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The btrfs metadata btree is the source of significant
lock contention, especially in the root node.   This
commit changes our locking to use a reader/writer
lock.

The lock is built on top of rw spinlocks, and it
extends the lock tracking to remember if we have a
read lock or a write lock when we go to blocking.  Atomics
count the number of blocking readers or writers at any
given time.

It removes all of the adaptive spinning from the old code
and uses only the spinning/blocking hints inside of btrfs
to decide when it should continue spinning.

In read heavy workloads this is dramatically faster.  In write
heavy workloads we're still faster because of less contention
on the root node lock.

We suffer slightly in dbench because we schedule more often
during write locks, but all other benchmarks so far are improved.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Hit this nice little deadlock.  What happens is this

__btrfs_end_transaction with throttle set, --use_count so it equals 0
  btrfs_commit_transaction
    <somebody else actually manages to start the commit>
    btrfs_end_transaction --use_count so now its -1 <== BAD
      we just return and wait on the transaction

This is bad because we just return after our use_count is -1 and don't let go
of our num_writer count on the transaction, so the guy committing the
transaction just sits there forever.  Fix this by inc'ing our use_count if we're
going to call commit_transaction so that if we call btrfs_end_transaction it's
valid.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The extent_buffers have a very complex interface where
we use HIGHMEM for metadata and try to cache a kmap mapping
to access the memory.

The next commit adds reader/writer locks, and concurrent use
of this kmap cache would make it even more complex.

This commit drops the ability to use HIGHMEM with extent buffers,
and rips out all of the related code.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

When we balanced the chunks across the devices, BUG_ON() in
__finish_chunk_alloc() was triggered.

------------[ cut here ]------------
kernel BUG at fs/btrfs/volumes.c:2568!
[SNIP]
Call Trace:
 [<ffffffffa049525e>] btrfs_alloc_chunk+0x8e/0xa0 [btrfs]
 [<ffffffffa04546b0>] do_chunk_alloc+0x330/0x3a0 [btrfs]
 [<ffffffffa045c654>] btrfs_reserve_extent+0xb4/0x1f0 [btrfs]
 [<ffffffffa045c86b>] btrfs_alloc_free_block+0xdb/0x350 [btrfs]
 [<ffffffffa048a8d8>] ? read_extent_buffer+0xd8/0x1d0 [btrfs]
 [<ffffffffa04476fd>] __btrfs_cow_block+0x14d/0x5e0 [btrfs]
 [<ffffffffa044660d>] ? read_block_for_search+0x14d/0x4d0 [btrfs]
 [<ffffffffa0447c9b>] btrfs_cow_block+0x10b/0x240 [btrfs]
 [<ffffffffa044dd5e>] btrfs_search_slot+0x49e/0x7a0 [btrfs]
 [<ffffffffa044f07d>] btrfs_insert_empty_items+0x8d/0xf0 [btrfs]
 [<ffffffffa045e973>] insert_with_overflow+0x43/0x110 [btrfs]
 [<ffffffffa045eb0d>] btrfs_insert_dir_item+0xcd/0x1f0 [btrfs]
 [<ffffffffa0489bd0>] ? map_extent_buffer+0xb0/0xc0 [btrfs]
 [<ffffffff812276ad>] ? rb_insert_color+0x9d/0x160
 [<ffffffffa046cc40>] ? inode_tree_add+0xf0/0x150 [btrfs]
 [<ffffffffa0474801>] btrfs_add_link+0xc1/0x1c0 [btrfs]
 [<ffffffff811dacac>] ? security_inode_init_security+0x1c/0x30
 [<ffffffffa04a28aa>] ? btrfs_init_acl+0x4a/0x180 [btrfs]
 [<ffffffffa047492f>] btrfs_add_nondir+0x2f/0x70 [btrfs]
 [<ffffffffa046af16>] ? btrfs_init_inode_security+0x46/0x60 [btrfs]
 [<ffffffffa0474ac0>] btrfs_create+0x150/0x1d0 [btrfs]
 [<ffffffff81159c63>] ? generic_permission+0x23/0xb0
 [<ffffffff8115b415>] vfs_create+0xa5/0xc0
 [<ffffffff8115ce6e>] do_last+0x5fe/0x880
 [<ffffffff8115dc0d>] path_openat+0xcd/0x3d0
 [<ffffffff8115e029>] do_filp_open+0x49/0xa0
 [<ffffffff8116a965>] ? alloc_fd+0x95/0x160
 [<ffffffff8114f0c7>] do_sys_open+0x107/0x1e0
 [<ffffffff810bcc3f>] ? audit_syscall_entry+0x1bf/0x1f0
 [<ffffffff8114f1e0>] sys_open+0x20/0x30
 [<ffffffff81484ec2>] system_call_fastpath+0x16/0x1b
[SNIP]
RIP  [<ffffffffa049444a>] __finish_chunk_alloc+0x20a/0x220 [btrfs]

The reason is:
Task1					Space balance task
do_chunk_alloc()
  __finish_chunk_alloc()
    update device info
    in the chunk tree
      alloc system metadata block
					relocate system metadata block group
					  set system metadata block group
					  readonly, This block group is the
					  only one that can allocate space. So
					  there is no free space that can be
					  allocated now.
        find no space and don't try
        to alloc new chunk, and then
        return ENOSPC
  BUG_ON() in __finish_chunk_alloc()
  was triggered.

Fix this bug by allocating a new system metadata chunk before relocating the
old one if we find there is no free space which can be allocated after setting
the old block group to be read-only.
Reported-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Tested-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Everybody else does this, we need to do it too.  If we're syncing, we need to
tag the pages we're going to write for writeback so we don't end up writing the
same stuff over and over again if somebody is constantly redirtying our file.
This will keep us from having latencies with heavy sync workloads.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

So I had this brilliant idea to use atomic counters for outstanding and reserved
extents, but this turned out to be a bad idea.  Consider this where we have 1
outstanding extent and 1 reserved extent

Reserver				Releaser
					atomic_dec(outstanding) now 0
atomic_read(outstanding)+1 get 1
atomic_read(reserved) get 1
don't actually reserve anything because
they are the same
					atomic_cmpxchg(reserved, 1, 0)
atomic_inc(outstanding)
atomic_add(0, reserved)
					free reserved space for 1 extent

Then the reserver now has no actual space reserved for it, and when it goes to
finish the ordered IO it won't have enough space to do it's allocation and you
get those lovely warnings.
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Kill the check to see if we have 512mb of reserved space in delalloc and
shrink_delalloc if we do.  This causes unexpected latencies and we have other
logic to see if we need to throttle.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

grab_cache_page will use mapping_gfp_mask(), which for all inodes is set to
GFP_HIGHUSER_MOVABLE.  So instead use find_or_create_page in all cases where we
need GFP_NOFS so we don't deadlock.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>