If the server sends us an RST error while we're in the TCP_ESTABLISHED
state, then that will not result in a state change, and so the RPC client
ends up hanging forever (see
http://bugzilla.kernel.org/show_bug.cgi?id=11154)

We can intercept the reset by setting up an sk->sk_error_report callback,
which will then allow us to initiate a proper shutdown and retry...

We also make sure that if the send request receives an ECONNRESET, then we
shutdown too...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits)
  ftrace: fix current_tracer error return
  tracing: fix a build error on alpha
  ftrace: use a real variable for ftrace_nop in x86
  tracing/ftrace: make boot tracer select the sched_switch tracer
  tracepoint: check if the probe has been registered
  asm-generic: define DIE_OOPS in asm-generic
  trace: fix printk warning for u64
  ftrace: warning in kernel/trace/ftrace.c
  ftrace: fix build failure
  ftrace, powerpc, sparc64, x86: remove notrace from arch ftrace file
  ftrace: remove ftrace hash
  ftrace: remove mcount set
  ftrace: remove daemon
  ftrace: disable dynamic ftrace for all archs that use daemon
  ftrace: add ftrace warn on to disable ftrace
  ftrace: only have ftrace_kill atomic
  ftrace: use probe_kernel
  ftrace: comment arch ftrace code
  ftrace: return error on failed modified text.
  ftrace: dynamic ftrace process only text section
  ...

* 'kvm-updates/2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
  KVM: ia64: Makefile fix for forcing to re-generate asm-offsets.h
  KVM: Future-proof device assignment ABI
  KVM: ia64: Fix halt emulation logic
  KVM: Fix guest shared interrupt with in-kernel irqchip
  KVM: MMU: sync root on paravirt TLB flush

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  lockdep: fix irqs on/off ip tracing
  lockdep: minor fix for debug_show_all_locks()
  x86: restore the old swiotlb alloc_coherent behavior
  x86: use GFP_DMA for 24bit coherent_dma_mask
  swiotlb: remove panic for alloc_coherent failure
  xen: compilation fix of drivers/xen/events.c on IA64
  xen: portability clean up and some minor clean up for xencomm.c
  xen: don't reload cr3 on suspend
  kernel/resource: fix reserve_region_with_split() section mismatch
  printk: remove unused code from kernel/printk.c

Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  irq: make variable static

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: fix documentation reference for sched_min_granularity_ns
  sched: virtual time buddy preemption
  sched: re-instate vruntime based wakeup preemption
  sched: weaken sync hint
  sched: more accurate min_vruntime accounting
  sched: fix a find_busiest_group buglet
  sched: add CONFIG_SMP consistency

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, memory hotplug: remove wrong -1 in calling init_memory_mapping()
  x86: keep the /proc/meminfo page count correct
  x86/uv: memory allocation at initialization
  xen: fix Xen domU boot with batched mprotect

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] s390: Fix build for !CONFIG_S390_GUEST + CONFIG_VIRTIO_CONSOLE
  [S390] No more 4kb stacks.
  [S390] Change default IPL method to IPL_VM.
  [S390] tape: disable interrupts in tape_open and tape_release
  [S390] appldata: unsigned ops->size cannot be negative
  [S390] tape block: complete request with correct locking
  [S390] Fix sysdev class file creation.
  [S390] pgtables: Fix race in enable_sie vs. page table ops
  [S390] qdio: remove incorrect memset
  [S390] qdio: prevent double qdio shutdown in case of I/O errors

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: ahci enclosure management bit mask
  libata: ahci enclosure management led sync
  pata_ninja32: suspend/resume support
  libata: Fix LBA48 on pata_it821x RAID volumes.
  libata: clear saved xfer_mode and ncq_enabled on device detach
  sata_sil24: configure max read request size to 4k
  libata: add missing kernel-doc
  libata: fix device iteration bugs
  ahci: Add support for Promise PDC42819
  ata: Switch all my stuff to a common address

The commit (in linux-tip) c2931e05
 ( ftrace: return an error when setting a nonexistent tracer )
added useful code that would error when a bad tracer was written into
the current_tracer file.

But this had a bug if the amount written was more than the amount read by
that code. The first iteration would set the tracer correctly, but since
it did not consume the rest of what was written (usually whitespace), the
userspace utility would continue to write what was not consumed. This
second iteration would fail to find a tracer and return -EINVAL. Funny
thing is that the tracer would have already been set.

This patch just consumes all the data that is written to the file.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

To avoid using stale asm-offsets.h.
Signed-off-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Reserve some space so we can add more data.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Common halt logic was changed by x86 and did not update ia64.  This patch
updates halt for ia64.

Fixes a regression causing guests to hang with more than 2 vcpus.
Signed-off-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Every call of kvm_set_irq() should offer an irq_source_id, which is
allocated by kvm_request_irq_source_id(). Based on irq_source_id, we
identify the irq source and implement logical OR for shared level
interrupts.

The allocated irq_source_id can be freed by kvm_free_irq_source_id().

Currently, we support at most sizeof(unsigned long) different irq sources.

[Amit: - rebase to kvm.git HEAD
       - move definition of KVM_USERSPACE_IRQ_SOURCE_ID to common file
       - move kvm_request_irq_source_id to the update_irq ioctl]

[Xiantao: - Add kvm/ia64 stuff and make it work for kvm/ia64 guests]
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The pvmmu TLB flush handler should request a root sync, similarly to
a native read-write CR3.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Impact: fix lockdep lock-api-caller output when irqsoff tracing is enabled

81d68a96 "ftrace: trace irq disabled critical timings" added wrappers around
trace_hardirqs_on/off_caller. However these functions use
__builtin_return_address(0) to figure out which function actually disabled
or enabled irqs. The result is that we save the ips of trace_hardirqs_on/off
instead of the real caller. Not very helpful.

However since the patch from Steven the ip already gets passed. So use that
and get rid of __builtin_return_address(0) in these two functions.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The s390 kernel does not compile if virtio console is enabled, but guest
support is disabled:

  LD      .tmp_vmlinux1
arch/s390/kernel/built-in.o: In function `setup_arch':
/space/linux-2.5/arch/s390/kernel/setup.c:773: undefined reference to
`s390_virtio_console_init'

The fix is related to
commit 99e65c92
Author: Christian Borntraeger <borntraeger@de.ibm.com>
Date:   Fri Jul 25 15:50:04 2008 +0200
    KVM: s390: Fix guest kconfig

Which changed the build process to build kvm_virtio.c only if CONFIG_S390_GUEST
is set. We must ifdef the prototype in the header file accordingly.
Reported-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

We got a stack overflow with a small stack configuration on a 32 bit
system. It just looks like as 4kb isn't enough and too dangerous.
So lets get rid of 4kb stacks on 32 bit.

But one thing I completely dislike about the call trace below is that
just for debugging or tracing purposes sprintf gets called (cio_start_key):

	/* process condition code */
	sprintf(dbf_txt, "ccode:%d", ccode);
	CIO_TRACE_EVENT(4, dbf_txt);

But maybe its just me who thinks that this could be done better.

    <4>Kernel stack overflow.
    <4>Modules linked in: dm_multipath sunrpc bonding qeth_l2 dm_mod qeth ccwgroup vmur
    <4>CPU: 1 Not tainted 2.6.27-30.x.20081015-s390default #1
    <4>Process httpd (pid: 3807, task: 20ae2df8, ksp: 1666fb78)
    <4>Krnl PSW : 040c0000 8027098a (number+0xe/0x348)
    <4>           R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:0 CC:0 PM:0
    <4>Krnl GPRS: 00d43318 0027097c 1666f277 9666f270
    <4>           00000000 00000000 0000000a ffffffff
    <4>           9666f270 1666f228 1666f277 1666f098
    <4>           00000002 80270982 80271016 1666f098
    <4>Krnl Code: 8027097e: f0340dd0a7f1	srp	3536(4,%r0),2033(%r10),4
    <4>           80270984: 0f00		clcl	%r0,%r0
    <4>           80270986: a7840001		brc	8,80270988
    <4>          >8027098a: 18ef		lr	%r14,%r15
    <4>           8027098c: a7faff68		ahi	%r15,-152
    <4>           80270990: 18bf		lr	%r11,%r15
    <4>           80270992: 18a2		lr	%r10,%r2
    <4>           80270994: 1893		lr	%r9,%r3

Modified calltrace with annotated stackframe size of each function:

stackframe size
    |
 0 304 vsnprintf+850 [0x271016]
 1  72 sprintf+74 [0x271522]
 2  56 cio_start_key+262 [0x2d4c16]
 3  56 ccw_device_start_key+222 [0x2dfe92]
 4  56 ccw_device_start+40 [0x2dff28]
 5  48 raw3215_start_io+104 [0x30b0f8]
 6  56 raw3215_write+494 [0x30ba0a]
 7  40 con3215_write+68 [0x30bafc]
 8  40 __call_console_drivers+146 [0x12b0fa]
 9  32 _call_console_drivers+102 [0x12b192]
10  64 release_console_sem+268 [0x12b614]
11 168 vprintk+462 [0x12bca6]
12  72 printk+68 [0x12bfd0]
13 256 __print_symbol+50 [0x15a882]
14  56 __show_trace+162 [0x103d06]
15  32 show_trace+224 [0x103e70]
16  48 show_stack+152 [0x103f20]
17  56 dump_stack+126 [0x104612]
18  96 __alloc_pages_internal+592 [0x175004]
19  80 cache_alloc_refill+776 [0x196f3c]
20  40 __kmalloc+258 [0x1972ae]
21  40 __alloc_skb+94 [0x328086]
22  32 pskb_copy+50 [0x328252]
23  32 skb_realloc_headroom+110 [0x328a72]
24 104 qeth_l2_hard_start_xmit+378 [0x7803bfde]
25  56 dev_hard_start_xmit+450 [0x32ef6e]
26  56 __qdisc_run+390 [0x3425d6]
27  48 dev_queue_xmit+410 [0x331e06]
28  40 ip_finish_output+308 [0x354ac8]
29  56 ip_output+218 [0x355b6e]
30  24 ip_local_out+56 [0x354584]
31 120 ip_queue_xmit+300 [0x355cec]
32  96 tcp_transmit_skb+812 [0x367da8]
33  40 tcp_push_one+158 [0x369fda]
34 112 tcp_sendmsg+852 [0x35d5a0]
35 240 sock_sendmsg+164 [0x32035c]
36  56 kernel_sendmsg+86 [0x32064a]
37  88 sock_no_sendpage+98 [0x322b22]
38 104 tcp_sendpage+70 [0x35cc1e]
39  48 sock_sendpage+74 [0x31eb66]
40  64 pipe_to_sendpage+102 [0x1c4b2e]
41  64 __splice_from_pipe+120 [0x1c5340]
42  72 splice_from_pipe+90 [0x1c57e6]
43  56 generic_splice_sendpage+38 [0x1c5832]
44  48 do_splice_from+104 [0x1c4c38]
45  48 direct_splice_actor+52 [0x1c4c88]
46  80 splice_direct_to_actor+180 [0x1c4f80]
47  72 do_splice_direct+70 [0x1c5112]
48  64 do_sendfile+360 [0x19de18]
49  72 sys_sendfile64+126 [0x19df32]
50 336 sysc_do_restart+18 [0x111a1a]
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

allyesconfig and allmodconfig built kernels have a tape IPL record.
A the vmreader record makes much more sense, since hardly anybody will
ever IPL a kernel from tape. So change the default.
As I side effect I can test these kernels without fiddling around with
the kernel config ;)
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Get tape device lock with interrupts disabled. Otherwise lockdep will issue a
warning similar to:

=================================
[ INFO: inconsistent lock state ]
2.6.27 #1
---------------------------------
inconsistent {in-hardirq-W} -> {hardirq-on-W} usage.
vol_id/2903 [HC0[0]:SC0[0]:HE1:SE1] takes:
 (sch->lock){++..}, at: [<000003e00004c7a2>] tape_open+0x42/0x1a4 [tape]
{in-hardirq-W} state was registered at:
  [<000000000007ce5c>] __lock_acquire+0x894/0xa74
  [<000000000007d0ce>] lock_acquire+0x92/0xb8
  [<0000000000345154>] _spin_lock+0x5c/0x9c
  [<0000000000202264>] do_IRQ+0x124/0x1f0
  [<0000000000026610>] io_return+0x0/0x8

irq event stamp: 847
hardirqs last  enabled at (847): [<000000000007aca6>] trace_hardirqs_on+0x2a/0x38
hardirqs last disabled at (846): [<0000000000076ca2>] trace_hardirqs_off+0x2a/0x38
softirqs last  enabled at (0): [<000000000004909e>] copy_process+0x43e/0x11f4
softirqs last disabled at (0): [<0000000000000000>] 0x0

other info that might help us debug this:
1 lock held by vol_id/2903:
 #0:  (&bdev->bd_mutex){--..}, at: [<000000000010e0f4>] do_open+0x78/0x358

stack backtrace:
CPU: 1 Not tainted 2.6.27 #1},
Process vol_id (pid: 2903, task: 000000003d4c0000, ksp: 000000003d4e3b10)
0400000000000000 000000003d4e3830 0000000000000002 0000000000000000
       000000003d4e38d0 000000003d4e3848 000000003d4e3848 00000000000168a8
       0000000000000000 000000003d4e3b10 0000000000000000 0000000000000000
       000000003d4e3830 000000000000000c 000000003d4e3830 000000003d4e38a0
       000000000034aa98 00000000000168a8 000000003d4e3830 000000003d4e3880
Call Trace:
([<000000000001681c>] show_trace+0x138/0x158)
 [<0000000000016902>] show_stack+0xc6/0xf8
 [<00000000000170d4>] dump_stack+0xb0/0xc0
 [<0000000000078810>] print_usage_bug+0x1e8/0x228
 [<000000000007a71c>] mark_lock+0xb14/0xd24
 [<000000000007cd5a>] __lock_acquire+0x792/0xa74
 [<000000000007d0ce>] lock_acquire+0x92/0xb8
 [<0000000000345154>] _spin_lock+0x5c/0x9c
 [<000003e00004c7a2>] tape_open+0x42/0x1a4 [tape]
 [<000003e00005185c>] tapeblock_open+0x98/0xd0 [tape]
Signed-off-by: NFrank Munzert <munzert@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

unsigned ops->size cannot be negative
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

__blk_end_request must be called with request queue lock held. We need to use
blk_end_request rather than  __blk_end_request.
Signed-off-by: NFrank Munzert <munzert@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Use sysdev_class_create_file() to create create sysdev class attributes
instead of sysfs_create_file(). Using sysfs_create_file() wasn't a very
good idea since the show and store functions have a different amount of
parameters for sysfs files and sysdev class files.
In particular the pointer to the buffer is the last argument and
therefore accesses to random memory regions happened.
Still worked surprisingly well until we got a kernel panic.

Cc: stable@kernel.org
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The current enable_sie code sets the mm->context.pgstes bit to tell
dup_mm that the new mm should have extended page tables. This bit is also
used by the s390 specific page table primitives to decide about the page
table layout - which means context.pgstes has two meanings. This can cause
any kind of bugs. For example  - e.g. shrink_zone can call
ptep_clear_flush_young while enable_sie is running. ptep_clear_flush_young
will test for context.pgstes. Since enable_sie changed that value of the old
struct mm without changing the page table layout ptep_clear_flush_young will
do the wrong thing.
The solution is to split pgstes into two bits
- one for the allocation
- one for the current state
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Remove the memset since zeroing the string is not needed and use
snprintf instead of sprintf.
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

In case of I/O errors on a qdio subchannel qdio_shutdown may be
called twice by the qdio driver and by zfcp. Remove the
superfluous shutdown from qdio and let the upper layer driver
handle the error condition.
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

When we failed to get tasklist_lock eventually (count equals 0),
we should only print " ignoring it.\n", and not print
" locked it.\n" needlessly.
Signed-off-by: NQinghuang Feng <qhfeng.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: build fix on Alpha

When tracing is enabled, some arch have included <linux/irqflags.h>
on their <asm/system.h> but others like alpha or m68k don't.

Build error on alpha:

kernel/trace/trace.c: In function 'tracing_cpumask_write':
kernel/trace/trace.c:2145: error: implicit declaration of function 'raw_local_irq_disable'
kernel/trace/trace.c:2162: error: implicit declaration of function 'raw_local_irq_enable'

Tested on Alpha through a cross-compiler (should correct a similar issue on m68k).
Reported-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix crash with memory hotplug

Shuahua Li found:

| I just did some experiments on a desktop for memory hotplug and this bug
| triggered a crash in my test.
|
| Yinghai's suggestion also fixed the bug.

We don't need to round it, just remove that extra -1
Signed-off-by: NYinghai <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Enclosure management bit mask definitions.
Signed-off-by: NDavid Milburn <dmilburn@redhat.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Synchronize ahci_sw_activity and ahci_sw_activity_blink with ata_port lock.
Signed-off-by: NDavid Milburn <dmilburn@redhat.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

I had assumed that the standard recovery would be sufficient for this
hardware but it isn't. Fix up the other registers on resume as needed. See
bug #11735
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

[http://lkml.org/lkml/2008/10/18/82]
Signed-off-by: NOndrej Zary <linux@rainbow-software.org>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

libata EH saves xfer_mode and ncq_enabled at start to later set
DUBIOUS_XFER flag if it has changed.  These values need to be cleared
on device detach such that hot device swap doesn't accidentally miss
DUBIOUS_XFER.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Due to request posting limitations, bandwidth of sil3132 is limited to
around 120MB/s with the minimum pci-e payload size (128bytes) which is
used by most consumer systems.  However, write throughput can be
slightly (~3%) increased by increasing the max read requeset size.
Configure it to 4k which is the maximum supported.  This optimization
is also done by SIMG's windows driver.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Fix libata missing kernel-doc:

Warning(lin2628-rc2//drivers/ata/libata-core.c:4562): No description
found for parameter 'tag'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

There were several places where only enabled devices should be
iterated over but device enabledness wasn't checked.

* IDENTIFY data 40 wire check in cable_is_40wire()
* xfer_mode/ncq_enabled saving in ata_scsi_error()
* DUBIOUS_XFER handling in ata_set_mode()

While at it, reformat comments in cable_is_40wire().
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Add an appropriate entry for the Promise PDC42819 controller. It has an
AHCI mode and so far works correctly with board_ahci.

This chip is found on Promise's FastTrak TX2650 (2 port) and TX4650 (4 port)
software-based RAID cards (for which there is a binary driver, t3sas) and
can be found on some motherboards, for example the MSI K9A2 Platinum,
which calls the chip a Promise T3 controller.

Although this controller also supports SAS devices, its default bootup mode
is AHCI and the binary driver has to do some magic to get the chip into the
appropriate mode to drive SAS disks.

Seeing as no documentation is provided by Promise, adding this entry to the
ahci driver allows the controller to be useful to people as a SATA
controller (with no ill effects on the system if a SAS disk is connected -
probing of the port just times out with "link online but device
misclassified"), without having to resort to using the binary driver. Users
who require SAS or the proprietary software raid can get this functionality
using the binary driver.
Signed-off-by: NMark Nelson <mdnelson8@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  libata: fix NCQ devices behind port multipliers
  scsi: make sure that scsi_init_shared_tag_map() doesn't overwrite existing map