Splitting the steps involved in the configuration of a tracer.
The first part is generic and can be reused for both sysFS and
Perf methods.

The second part pertains to the configuration of filters
themselves where the source of the information used to
configure the filters will vary depending on the access
methods.
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

With this commit [1] address range filter information is now found
in the struct hw_perf_event::addr_filters.  As such pass the event
itself to the coresight_source::enable/disable() functions so that
both event attribute and filter can be accessible for configuration.

[1] 'commit 375637bc ("perf/core: Introduce address range filtering")'
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The Coresight ETMv4 architecture provides a way to request to keep the
power to the trace unit. This might help to collect the traces without
the need to disable the CPU power management(entering/exiting deeper
idle states).

Trace PowerDown Control Register provides powerup request bit which when
set requests the system to retain power to the trace unit and emulate
the powerdown request.

Typically, a trace unit drives a signal to the power controller to
request that the trace unit core power domain is powered up. However,
if the trace unit and the CPU are in the same power domain then the
implementation might combine the trace unit power up status with a
signal from the CPU.

This patch requests to retain power to the trace unit when active and
to remove when inactive. Note this change will only request but the
behaviour depends on the implementation. However, it matches the
exact behaviour expected when the external debugger is connected with
respect to CPU power states.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NSudeep Holla <sudeep.holla@arm.com>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove duplicated include.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Each coresight device prepares a description for coresight_register()
in struct coresight_desc. Once we register the device, the description is
useless and can be freed. The coresight_desc is small enough (48bytes on
64bit)i to be allocated on the stack. Hence use an automatic variable to
avoid a needless dynamic allocation and wasting the memory(which will only
be free'd when the device is destroyed).

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When we encounter a timeout waiting for a status change via
coresight_timeout, the caller always print the offset which
was tried. This is pretty much useless as it doesn't specify
the bit position we wait for. Also, one needs to lookup the
TRM to figure out, what was wrong. This patch changes all
such error messages to print something more meaningful.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch cleans up the peripheral id table for different ETMv4
implementations.

As per Cortex-A53 TRM, the ETM has following id values:

Peripheral ID0	0x5D	0xFE0
Peripheral ID1	0xB9	0xFE4
Peripheral ID2	0x4B	0xFE8
Peripheral ID3	0x00	0xFEC

where, PID2: has the following format:

[7:4]   Revision
[3]     JEDEC   0b1     res1. Indicates a JEP106 identity code is used
[2:0]   DES_1   0b011   ARM Limited. This is bits[6:4] of JEP106 ID code

The existing table entry checks only the bits [1:0], which is not
sufficient enough. Fix it to match bits [3:0], just like the other
entries do. While at it, correct the comment for A57 and the A53 entry.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

etm4_trace_id is not guaranteed to be executed on the CPU whose ETM is
being accessed. This leads to exception similar to below one if the
CPU whose ETM is being accessed is in deeper idle states. So it must
be executed on the CPU whose ETM is being accessed.

Unhandled fault: synchronous external abort (0x96000210) at 0xffff000008db4040
Internal error: : 96000210 [#1] PREEMPT SMP
Modules linked in:
CPU: 5 PID: 5979 Comm: etm.sh Not tainted 4.7.0-rc3 #159
Hardware name: ARM Juno development board (r2) (DT)
task: ffff80096dd34b00 ti: ffff80096dfe4000 task.ti: ffff80096dfe4000
PC is at etm4_trace_id+0x5c/0x90
LR is at etm4_trace_id+0x3c/0x90
Call trace:
 etm4_trace_id+0x5c/0x90
 coresight_id_match+0x78/0xa8
 bus_for_each_dev+0x60/0xa0
 coresight_enable+0xc0/0x1b8
 enable_source_store+0x3c/0x70
 dev_attr_store+0x18/0x28
 sysfs_kf_write+0x48/0x58
 kernfs_fop_write+0x14c/0x1e0
 __vfs_write+0x1c/0x100
 vfs_write+0xa0/0x1b8
 SyS_write+0x44/0xa0
 el0_svc_naked+0x24/0x28

However, TRCTRACEIDR is not guaranteed to hold the previous programmed
trace id if it enters deeper idle states. Further, the trace id that is
computed in etm4_init_trace_id is programmed into TRCTRACEIDR only in
etm4_enable_hw which happens much later in the sequence after
coresight_id_match is executed from enable_source_store.

This patch simplifies etm4_trace_id by returning the stashed trace id
value similar to etm4_cpu_id.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NSudeep Holla <sudeep.holla@arm.com>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver has an asymmetry of ONLINE code without any corresponding tear
down code. Otherwise, this is a straightforward conversion.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NAnna-Maria Gleixner <anna-maria@linutronix.de>
Acked-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160713153337.228918408@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch adds a cellID for the ETMv4 tracer found on
HiSillicon's A72 Maia processor.
Signed-off-by: NLi Pengcheng <lipengcheng8@huawei.com>
Signed-off-by: NLi Zhong <lizhong11@hisilicon.com>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Adding a set of API allowing the Perf core to treat ETMv4
tracers like other PMUs.
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Adding new mode to limit tracing to kernel or user space.
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Similarly to ETMv3, moving etmv4_drvdata::enable to an atomic
type that gives the 'mode' of a tracer and prevents multiple,
simultanious access by different subsystems.
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

As with the ETMv3.x driver, calling 'smp_call_function_single()'
twice in a row is highly ineffective.  As such moving function
'etm4_os_unlock()' before the default initialisation takes
place, which results in the same outcome.
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Splitting and updating the default initialisation for each etmv4
configuration so that it can be called at the beginning of each
session rather than initialisation time only.

Since the trace ID isn't expected to change with every session,
moving it with the default tracer initialisation.
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Similar to what was done on etm3x, splitting driver structure
etmv4_drvdata in two.  One half is concerned with the HW
characteristics that are generally static in nature.  The other
half deals with user configuration and will change from one
trace session to another.

No gain/loss of functionality is incurred from this patch.
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

As with the etm3x driver, sysFS entries are big enough to justify
their own file. As such moving all sysFS related declarations to
a dedicated location.

No gain/loss of functionality is incurred from this patch.
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

None of the Kconfig currently controlling compilation of any of
the files here are tristate, meaning that none of it currently
is being built as a module by anyone.

We need not be concerned about .remove functions and blocking the
unbind sysfs operations, since that was already done in a recent
commit.

Lets remove any remaining modular references, so that when reading the
drivers there is no doubt they are builtin-only.

All drivers get mostly the same changes, so they are handled in batch.
Changes are (1) convert to builtin_amba_driver, (2) delete module.h
include where unused, and (3) relocate the description into the
comments so we don't need MODULE_DESCRIPTION and associated tags.

The etm3x and etm4x use module_param_named, and have been adjusted
to just include moduleparam.h for that purpose.

In commit f309d444 ("platform_device:
better support builtin boilerplate avoidance") we introduced the
builtin_driver macro.

Here we use that support and extend it to amba driver registration,
so where a driver is clearly non-modular and builtin-only, we can
update with the simple mapping of

     module_amba_driver(...)  ---> builtin_amba_driver(...)

Since module_amba_driver() uses the same init level priority as
builtin_amba_driver() the init ordering remains unchanged with
this commit.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

That way traces can be enabled and disabled automatically
from the Perf subystem using the PMU abstraction.
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Adding a new mode to source API enable() in order to
distinguish where the request comes from.  That way it is
possible to perform different operations based on where
the request was issued from.

The ETM4x driver is also modified to keep in sync with the
new interface.
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Moving PM runtime operations in Coresight devices enable() and
disable() API to the framework core when a path is setup.  That
way the runtime core doesn't have to be involved everytime a
path is enabled.  It also avoids calling runtime PM operations
in IRQ context.
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

"DEVICE_ATTR_RO(name)" should be defined as static. And
there is an unnecessary space at the front of the code.

The sparse tool output logs as the following:
coresight-etm4x.c:2224:1: warning: symbol 'dev_attr_trcoslsr' was
not declared. Should it be static?
coresight-etm4x.c:2225:1: warning: symbol 'dev_attr_trcpdcr' was
not declared. Should it be static?
coresight-etm4x.c:2226:1: warning: symbol 'dev_attr_trcpdsr' was
not declared. Should it be static?
And the smatch tool output logs as the following:
of_coresight.c:89 of_coresight_alloc_memory() warn:
inconsistent indenting
Signed-off-by: NEric Long <eric.long@linaro.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Other than plainly parsing the device tree there is no way to
know which CPU a tracer is affined to.  As such adding an
interface to lookup the CPU field enclosed in the etm_drvdata
structure that was initialised at boot time.
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The coresight drivers have absolutely no control over bind and unbind
operations triggered from sysfs. The operations simply can't be
cancelled or denied event when one or several tracing sessions are
under way.  Since the memory associated to individual device is
invariably freed, the end result is a kernel crash when the path from
source to sink is travelled again as demonstrated here[1].

One solution could be to keep track of all the path (i.e tracing
session) that get created and iterate through the elements of those path
looking for the coresight device that is being removed.  This proposition
doesn't scale well since there is no upper bound on the amount of
concurrent trace session that can be created.

With the above in mind, this patch prevent devices from being unbounded
from their driver by using the driver->suppress_bind_attr option.  That way
trace sessions can be managed without fearing to loose devices.

Since device can't be removed anymore the xyz_remove() functions found in
each driver is also removed.

[1]. http://www.spinics.net/lists/arm-kernel/msg474952.htmlReported-by: NRabin Vincent <rabin@rab.in>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

1. TRCRSCTLRn - Resource Selection Control Registers n=0~1 are reserved,
   we shouldn't access them.
2. The max number of 'n' here is defined in TRCIDR4.NUMRSPAIR whoes value
   indicates the number of resource selection *pairs*, and 0 indicates
   one resource selection pair, 1 indicates two pairs, and so on ...

So, the total number of resource selection control registers which we can
access is (TRCIDR4.NUMRSPAIR * 2)
Signed-off-by: NChunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Like ETTv3, ETMv4 also needs the similar modifications to support Context
ID tracing when PID namespace is enabled.
Signed-off-by: NChunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

'ctxid_val' array was used to store the value of ETM context ID comparator
which actually stores the process ID to be traced, so using 'ctxid_pid' as
its name instead make it easier to understand.

This patch also changes the ABI, it is normally not allowed, but
fortunately it is a testing ABI and very new for now. Nevertheless,
if you don't think it should be changed, we could always add an alias
for userspace.
Signed-off-by: NChunyan Zhang <zhang.chunyan@linaro.org>
Reviewed-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In commit 2e1cdfe1 ("coresight-etm4x:
Adding CoreSight ETM4x driver") this driver was added.

It uses module_amba_driver() to register itself with the system,
which is just an alias for module_driver.  This currently works by
relying on getting that via init.h but we are planning to move that
code[1] to module.h -- at which time this will fail to compile since
it does not include module.h currently, resulting in:

drivers/hwtracing/coresight/coresight-etm4x.c:2701:1: note: in expansion of macro ‘module_amba_driver’
 module_amba_driver(etm4x_driver);
 ^
include/linux/device.h:1296:1: error: type defaults to ‘int’ in declaration of ‘module_init’ [-Werror=implicit-int]
 module_init(__driver##_init); \
 ^

In the future, the amba support may want to create another alias that
uses builtin_driver[2] for cases like this which are using bool Kconfig
triggers, but for now we just fix the implicit include.

[1] https://lkml.kernel.org/r/1433276168-21550-1-git-send-email-paul.gortmaker@windriver.com
[2] https://lkml.kernel.org/r/1431287385-1526-1-git-send-email-paul.gortmaker@windriver.com

Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

ETM ID registers contain valuable information about the capabilities
of the implementation and are very useful when configuring the device for
various trace scenarios.
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Having access to the ETMv4 management registers is very useful as they
give meaningful information on how the IP block has been configured at
synthesis time.
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Adding sysfs entries to access and configure specifics about the
virtual machine ID comparator functions.
Signed-off-by: NPratik Patel <pratikp@codeaurora.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Adding sysfs entries to access and configure specifics about the
context ID comparator functions.
Signed-off-by: NPratik Patel <pratikp@codeaurora.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Adding sysfs entries to control the selection of the resources the
trace unit will use as triggers to perform a trace run.
Signed-off-by: NPratik Patel <pratikp@codeaurora.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Adding sysfs entries related to the counter functionality, more
specifically to set, control and reload the counters.
Signed-off-by: NPratik Patel <pratikp@codeaurora.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Adding sysfs entries to access the sequencers related registers,
more specifically the sequencer state, the sequencer state
transition and the sequencer reset control registers.
Signed-off-by: NPratik Patel <pratikp@codeaurora.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Adding sysfs entries to control the various mode the address comparator
registers can enact, i.e, start/top, single, and range.  Also supplementing
with address comparator types configuration registers access, mandatory
to complete the configuration of the comparator functions.
Signed-off-by: NPratik Patel <pratikp@codeaurora.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Adding sysfs entries to control the ViewInst register's event
selector along with secure and non-secure exception level
instruction tracing.
Signed-off-by: NPratik Patel <pratikp@codeaurora.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Adding sysfs entries to configure:
. global timestamp.
. how often trace synchronisation occur.
. the threashold value for cycle counting.
. branch and broadcasting regions.
Signed-off-by: NPratik Patel <pratikp@codeaurora.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Adding sysfs entries to:
. set the tracing entity with default values.
. set various mode associated to the tracing entity.
. select the processing entity the tracing entity relates to.
. select various events of interest.
Signed-off-by: NPratik Patel <pratikp@codeaurora.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Tracers can be configured with various options at synthesis
time and knowing what resources are available is important for
SW configuration purposes.

As such adding RO sysfs entries for characteristics related to the
tracer implementation.
Signed-off-by: NPratik Patel <pratikp@codeaurora.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>