Some errors during preparation for suspended state can be skipped with a
warning instead of a failure of the whole suspend transition, notably an
error in pci_set_power_state.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Only build IEEE1394 OUI database files if the config option is enabled.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Fix printk format warning:
drivers/ieee1394/nodemgr.c:364: warning: long long unsigned int format, u64 arg (arg 3)
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

 - The list "struct class.children" is supposed to be protected by
   class.sem, not by class.subsys.rwsem.

 - nodemgr_remove_uds() iterated over nodemgr_ud_class.children without
   proper protection.  This was never observed as a bug since the code
   is usually only accessed by knodemgrd.  All knodemgrds are currently
   globally serialized.  But userspace can trigger this code too by
   writing to /sys/bus/ieee1394/destroy_node.

 - Clean up access to the FireWire bus type's subsys.rwsem:  Access it
   uniformly via ieee1394_bus_type.  Shrink rwsem protected regions
   where possible.  Expand them where necessary.  The latter wasn't a
   problem so far because knodemgr is globally serialized.

This should harden the interaction of ieee1394 with sysfs and lay ground
for deserialized operation of multiple knodemgrds and for implementation
of subthreads for parallelized scanning and probing.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Give better names to local variables.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

One hunk in "ieee1394: handle sysfs errors" was wrong.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Purges the one remaining call to lock_kernel() from the 1394 subsystem.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

video1394 does not need to take the BKL. The data structures shared between
file_operations and interrupts are already protected through context-specific
spinlocks.

The only other danger is video1394_release() being called during another
operation, however this cannot happen because release is only ever invoked
when the last thread has closed the fd.
Signed-off-by: NDaniel Drake <ddrake@brontes3d.com>
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Add some GCC branch prediction optimizations to unlikely error/safety
conditions in the ioctl handling code commonly called during an application's
capture loop.
Signed-off-by: NDaniel Drake <ddrake@brontes3d.com>
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Handle driver core errors with as much care as appropriate.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Some 80-columns pedantry, and touch up of a // comment.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

We need the mutex only around the iteration over existing hosts.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Reorder the definitions of ohci1394_pci_suspend and _resume.  Remove
redundant comments.  Beautify return statements.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

I did a quick shot on what I described and the appended patch
does the first thing needed for working suspend/resume
in ohci1394 which is HW de- and re-initialisation.

It works with suspend2disk on my Ricoh R5C552 IEEE 1394 Controller
with the 2.6.17 kernel to the extent that if I call dvgrab --interactive
after suspend2disk without unloading ohci1394, it does not lock up
dvgrab with 100% CPU but properly connects to the camera, given
that I first unplug and plug the camera after coming back from
suspend.

I guess that could be fixed by forcing a bus reset in the resume
function.

I cannot test suspend to RAM here at the moment and should
follow the guidelines in Documentation/power/pci.txt also,
so this is rather a quick report than a finished patch and
there are some rough edges:

However, with this patch, I have to unload at least some in-kernel
users of ohci1394 like dv1394 or video1394 before suspending.

Not doing that caused an Oops and a bad tasklet error, probably from
not handling ISO tasklets during suspend/resume properly.

Maybe these can be temporarily cleared or unregistered and
re-registered for suspend/resume with help from the other
layers or from the highlevel 1394 core, but I do not really
know what these do.

But this patch provides a useful base to start from and is
already of much help for people which do not need dv1394
and video1394 or can unload them at least during suspend.

I cannot test function with sbp2 at the moment, but raw1394
seems to work fine.
Signed-off-by: NBernhard Kaindl <bk@fsfe.org>

Update 1: merge with previous two ohci1394 suspend/resume patches
Update 2: version for application on top of Linux 2.6.19-rc4
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Add a who-is-who about some locks and list heads in raw1394's struct
definitions.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Put the target's fetch agent into reset state before the underlying ORB
DMA is unmapped and the ->done handler is called.  It is highly unlikely
but the target could access that ORB right before sbp2 sends the reset
request.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

struct hpsb_highlevel's struct module *owner is neither used by the IEEE
1394 core nor set by any of the in-tree drivers or the two out-of-tree
highlevel drivers I know about (dfg1394, mem1394) --- nor is this member
documented.  An unscheduled removal seems acceptable.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

This allows workqueue users to run just their own pending work, rather
than wait for the whole workqueue to finish running.  This solves the
deadlock with networking libphy that was due to other workqueue entries
possibly needing a lock that was held by the routine that wanted to
flush its own work.

It's not wonderful: if you absolutely need to synchronize with the work
function having been executed, any user strictly speaking should have
its own completion tracking logic, since when we run things explicitly
by hand, the generic workqueue layer can no longer help us synchronize.

Also, this is strictly only usable for work that has been scheduled
without any delayed timers.  You can not mix the new interface with
schedule_delayed_work().

But it's better than what we had currently.
Acked-by: NMaciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [PATCH] libata: Incorrect timing computation for PIO5/6
  [PATCH] sata_promise: new EH conversion, take 2
  [PATCH] libata: let ATA_FLAG_PIO_POLLING use polling pio for ATA_PROT_NODATA
  [PATCH] sata_promise: cleanups, take 2

* master.kernel.org:/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (73 commits)
  [DLM] Clean up lowcomms
  [GFS2] Change gfs2_fsync() to use write_inode_now()
  [GFS2] Fix indent in recovery.c
  [GFS2] Don't flush everything on fdatasync
  [GFS2] Add a comment about reading the super block
  [GFS2] Mount problem with the GFS2 code
  [GFS2] Remove gfs2_check_acl()
  [DLM] fix format warnings in rcom.c and recoverd.c
  [GFS2] lock function parameter
  [DLM] don't accept replies to old recovery messages
  [DLM] fix size of STATUS_REPLY message
  [GFS2] fs/gfs2/log.c:log_bmap() fix printk format warning
  [DLM] fix add_requestqueue checking nodes list
  [GFS2] Fix recursive locking in gfs2_getattr
  [GFS2] Fix recursive locking in gfs2_permission
  [GFS2] Reduce number of arguments to meta_io.c:getbuf()
  [GFS2] Move gfs2_meta_syncfs() into log.c
  [GFS2] Fix journal flush problem
  [GFS2] mark_inode_dirty after write to stuffed file
  [GFS2] Fix glock ordering on inode creation
  ...

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (43 commits)
  [wireless] zd1211rw: workqueue-related build fixes
  [netdrvr] netxen: workqueue-related build fixes
  [PATCH] sky2: sparse warnings
  [PATCH] skge: fix sparse warnings
  [PATCH] myri10ge: write as 2 32-byte blocks in myri10ge_submit_8rx
  [PATCH] sky2: receive queue watermark tweak
  [PATCH] sky2: beter ram buffer partitioning
  [PATCH] sky2: add comments to PCI ids
  [PATCH] sky2: add PCI for 88ec033
  [PATCH] AT91RM9200 Ethernet: Use dev_alloc_skb()
  [PATCH] AT91RM9200 Ethernet: Add netpoll / netconsole support
  [PATCH] AT91RM9200 Ethernet: Move check_timer variable and use mod_timer()
  [PATCH] AT91RM9200 Ethernet: Remove 'at91_dev' and use netdev_priv()
  [PATCH] ipw2200: Fix debug output endian issue
  [PATCH] ipw2200: Fix a typo
  [PATCH] ipw2200: Update version stamp to 1.2.0
  [PATCH] ipw2200: Add IEEE80211_RADIOTAP_TSFT for promiscuous mode
  [PATCH] softmac: fix unbalanced mutex_lock/unlock in ieee80211softmac_wx_set_mlme
  [PATCH] softmac: Fixed handling of deassociation from AP
  [PATCH] ipw2200: replace kmalloc+memset with kcalloc
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (48 commits)
  [NETFILTER]: Fix non-ANSI func. decl.
  [TG3]: Identify Serdes devices more clearly.
  [TG3]: Use msleep.
  [TG3]: Use netif_msg_*.
  [TG3]: Allow partial speed advertisement.
  [TG3]: Add TG3_FLG2_IS_NIC flag.
  [TG3]: Add 5787F device ID.
  [TG3]: Fix Phy loopback.
  [WANROUTER]: Kill kmalloc debugging code.
  [TCP] inet_twdr_hangman: Delete unnecessary memory barrier().
  [NET]: Memory barrier cleanups
  [IPSEC]: Fix inetpeer leak in ipv4 xfrm dst entries.
  audit: disable ipsec auditing when CONFIG_AUDITSYSCALL=n
  audit: Add auditing to ipsec
  [IRDA] irlan: Fix compile warning when CONFIG_PROC_FS=n
  [IrDA]: Incorrect TTP header reservation
  [IrDA]: PXA FIR code device model conversion
  [GENETLINK]: Fix misplaced command flags.
  [NETLIK]: Add a pointer to the Generic Netlink wiki page.
  [IPV6] RAW: Don't release unlocked sock.
  ...

* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (156 commits)
  [PATCH] x86-64: Export smp_call_function_single
  [PATCH] i386: Clean up smp_tune_scheduling()
  [PATCH] unwinder: move .eh_frame to RODATA
  [PATCH] unwinder: fully support linker generated .eh_frame_hdr section
  [PATCH] x86-64: don't use set_irq_regs()
  [PATCH] x86-64: check vector in setup_ioapic_dest to verify if need setup_IO_APIC_irq
  [PATCH] x86-64: Make ix86 default to HIGHMEM4G instead of NOHIGHMEM
  [PATCH] i386: replace kmalloc+memset with kzalloc
  [PATCH] x86-64: remove remaining pc98 code
  [PATCH] x86-64: remove unused variable
  [PATCH] x86-64: Fix constraints in atomic_add_return()
  [PATCH] x86-64: fix asm constraints in i386 atomic_add_return
  [PATCH] x86-64: Correct documentation for bzImage protocol v2.05
  [PATCH] x86-64: replace kmalloc+memset with kzalloc in MTRR code
  [PATCH] x86-64: Fix numaq build error
  [PATCH] x86-64: include/asm-x86_64/cpufeature.h isn't a userspace header
  [PATCH] unwinder: Add debugging output to the Dwarf2 unwinder
  [PATCH] x86-64: Clarify error message in GART code
  [PATCH] x86-64: Fix interrupt race in idle callback (3rd try)
  [PATCH] x86-64: Remove unwind stack pointer alignment forcing again
  ...

Fixed conflict in include/linux/uaccess.h manually
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

  In file included from include/asm/patch.h:14,
		 from arch/ia64/kernel/patch.c:10:
  include/linux/elf.h:375: warning: "struct file" declared inside parameter list
  include/linux/elf.h:375: warning: its scope is only this definition or declaration, which is probably not what you want
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When using fake NUMA setup, the number of memory nodes can greatly exceed
the number of CPUs.  So the current limit in cpuset_common_file_write() is
insufficient.
Signed-off-by: NPaul Menage <menage@google.com>
Acked-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Removes all inline keywords, since the compiler will make static functions
inline when it is appropriate.
Signed-off-by: NAvantika Mathur <mathur@us.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Performs kmalloc to kzalloc conversion
Signed-off-by: NAvantika Mathur <mathur@us.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

changes instances of
	if ((lhs = expression)) {

to the preferred coding style

	lhs=expression;
	if (lhs) {
Signed-off-by: NAvantika Mathur <mathur@us.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Port fix to the off-by-one in find_next_usable_block's memscan from ext2 to
ext3; but it didn't cause a serious problem for ext3 because the additional
ext3_test_allocatable check rescued it from the error.
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

ext3_new_blocks has a nice io_error label for setting -EIO, so goto that in
the one place that doesn't already use it.
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The reservations tree is an rb_tree not a list, so it's less confusing to use
rb_entry() than list_entry() - though they're both just container_of().
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

rsv_end is the last block within the reservation, so alloc_new_reservation
should accept start_block == rsv_end as success.
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

grp_goal 0 is a genuine goal (unlike -1), so ext3_try_to_allocate_with_rsv
should treat it as such.
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

ext3_new_blocks should reset the reservation window size to 0 when squeezing
the last blocks out of an almost full filesystem, so the retry doesn't skip
any groups with less than half that free, reporting ENOSPC too soon.
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix build warnings for PROC_FS=n.

  drivers/char/ipmi/ipmi_poweroff.c:707: warning: label 'out_err' defined but not used

  drivers/char/ipmi/ipmi_msghandler.c:1774: warning: 'ipmb_file_read_proc' defined but not used
  drivers/char/ipmi/ipmi_msghandler.c:1790: warning: 'version_file_read_proc' defined but not used
  drivers/char/ipmi/ipmi_msghandler.c:1801: warning: 'stat_file_read_proc' defined but not used
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Corey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Increase the maximum message size a KCS interface supports to the maximum
message size the rest of the driver supports.  Some systems really support
messages this big.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Cc: Patrick Schoeller <Patrick.Schoeller@hp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The IPMI BT subdriver has been patched to survive "long busy" timeouts seen
during firmware upgrades and resets.  The patch never returns the HOSED state,
synthesizes response messages with meaningful completion codes, and recovers
gracefully when the hardware finishes the long busy.  The subdriver now issues
a "Get BT Capabilities" command and properly uses those results.  More
informative completion codes are returned on error from transaction starts;
this logic was propogated to the KCS and SMIC subdrivers.  Finally, indent and
other style quirks were normalized.
Signed-off-by: NRocky Craig <rocky.craig@hp.com>
Signed-off-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Change pci_module_init() to the new interface, and check the return code to
avoid warnings and give the user useful information if this fails.
Signed-off-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

X86 boards generally use ACPI for the power management interactions with the
BMC.  However, non-x86 boards need some help.  This patch adds the help for
the Motorola PigeonPoint-based IPMCs.
Signed-off-by: NJoseph Barnett <jbarnett@motorola.com>
Signed-off-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>