- 29 5月, 2018 40 次提交
-
-
由 Jiri Pirko 提交于
There is an exception in command interface processing in case the MRSR register is written to. The register triggers FW reset and during the reset FW returns an error. So handle this by ignoring this error while writing to MRSR register. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Timur Tabi 提交于
Commit "net: qcom/emac: Encapsulate sgmii ops under one structure" introduced the sgmii_ops structure, but did not correctly initialize it on device tree platforms. This resulted in compiler warnings when ACPI is not enabled. Reported-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NTimur Tabi <timur@codeaurora.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
With CONFIG_TLS=m and MLX5_CORE_EN=y, we get a link failure: drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls_rxtx.o: In function `mlx5e_tls_handle_ooo': tls_rxtx.c:(.text+0x24c): undefined reference to `tls_get_record' drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls_rxtx.o: In function `mlx5e_tls_handle_tx_skb': tls_rxtx.c:(.text+0x9a8): undefined reference to `tls_device_sk_destruct' This narrows down the dependency to only allow the configurations that will actually work. The existing dependency on TLS_DEVICE is not sufficient here since MLX5_EN_TLS is a 'bool' symbol. Fixes: c83294b9 ("net/mlx5e: TLS, Add Innova TLS TX support") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NSaeed Mahameed <saeedm@mellanox.com> Acked-by: NBoris Pismenny <borisp@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YueHaibing 提交于
the message be freed immediately, no need to trim it back to the previous size. Inspired by commit 7a9b3ec1 ("nl80211: remove unnecessary genlmsg_cancel() calls") Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
Fixes the following sparse warnings: net/ipv4/bpfilter/sockopt.c:13:5: warning: symbol 'bpfilter_mbox_request' was not declared. Should it be static? Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jakub Kicinski says: ==================== nfp: abm: RED/MQ qdisc offload This is second batch of advanced buffer management nfp driver changes. This series adds the qdisc offload. Support for a very simple subset of RED qdisc offload is added as needed for DCTCP ECN marking (min and max thresholds set to the same value). The first two patches fix glitches introduced by the previous series. We have to be careful about phys_port_name handling, because VFs share the same code path, and some user space may get confused by the names we chose. Since unlike previous offloads we can report the queue backlog both in bytes and packets we need to adjust how statistics are added up in the core (patch 6). There are some extra statistics we want to expose which don't fit into TC stats, namely counts of packets which have been fast- -forwarded without getting enqueued because there was no contention and number of packets that were ever queued (sum of all momentary backlogs). We expose those through ethtool stats (patches 8 and 9). Remaining 5 patches add MQ offload - to be able to set different configurations on different queues. Representors are made multi- -queue and we add offload support to MQ. MQ stats are added up before calling ->dump qdiscs on the children, and therefore don't include updated offload values. To avoid clearly incorrect stats MQ is made to also request stats update from offloads. This way we can correct the diff at the driver level. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
Report the stat diff to make sure MQ stats add up to child stats. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
MQ doesn't hold any statistics on its own, however, statistic from offloads are requested starting from the root, hence MQ will read the old values for its sums. Call into the drivers, because of the additive nature of the stats drivers are aware of how much "pending updates" they have to children of the MQ. Since MQ reset its stats on every dump we can simply offset the stats, predicting how stats of offloaded children will change. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
Add support for MQ offload and setting RED parameters on queue-by-queue basis. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
mq offload is trivial, we just need to let the device know that the root qdisc is mq. Alternative approach would be to export qdisc_lookup() and make drivers check the root type themselves, but notification via ndo_setup_tc is more in line with other qdiscs. Note that mq doesn't hold any stats on it's own, it just adds up stats of its children. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
Allocate the PF representor as multi-queue to allow setting the configuration per-queue. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
There is a handful of statistics exposing some internal details of the implementation. Expose those via ethtool. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
Allow nfp apps to add extra ethtool stats. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
Report basic and extended RED statistics back to TC. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
AFAICT struct gnet_stats_queue.qlen is not used in Qdiscs. It may, however, be useful for offloads to report HW queue length there. Add that value to the result of qdisc_qlen_sum(). Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
Offload simple RED configurations. For now support only DCTCP like scenarios where min and max are the same. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
Queue levels for simple ECN marking are stored in _abi_nfd_out_q_lvls_X symbol, where X is the PCIe PF id. Find out the location of that symbol and add helpers for modifying it. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
ABM NIC FW has a cut-through mode where the PCIe queuing is bypassed, thus working like our standard NIC FWs. Use this mode by default and only enable queuing in switchdev mode where users can configure it. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
Some drivers are using a bare number inside phys_port_name as VF id and OpenStack's regexps will pick it up. We can't use a bare number for your vNICs, prefix the names with 'n'. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
After recent change we started returning 0 from ndo_get_phys_port_name for VFs. The name parameter for ndo_get_phys_port_name is not initialized by the stack so this can lead to a crash. We should have kept returning -EOPNOTSUPP in the first place. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux由 David S. Miller 提交于
Saeed Mahameed says: ==================== mlx5e-updates-2018-05-25 This series includes updates for mlx5e netdev driver. 1) Allowr flow based VF vport mirroring under sriov switchdev scheme, added support for offloading the TC mirred mirror sub-action, from Chris Mi. ================= From: Or Gerlitz <ogerlitz@mellanox.com> The user will typically set the actions order such that the mirror port (mirror VF) sees packets as the original port (VF under mirroring) sent them or as it will receive them. In the general case, it means that packets are potentially sent to the mirror port before or after some actions were applied on them. To properly do that, we follow on the exact action order as set for the flow and make sure this will also be the case when we program the HW offload. If all the actions should apply before forwarding to the mirror and dest port, mirroring is just multicasting to the two vports. Otherwise, we split the TC flow to two HW rules, where the 1st applies only the actions needed up to the mirror (if there are such) and the 2nd the rest of the actions plus the forwarding to the dest vport. ================= 2) Move to order-0 only allocations (using fragmented work queues) for all work queues used by the driver, RX and TX descriptor rings (RQs, SQs and Completion Queues (CQs)), from Tariq Toukan. 3) Avoid resetting netdevice statistics on netdevice state changes, from Eran Ben Elisha. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
bpfilter_process_sockopt is a callback that gets called from ip_setsockopt() and ip_getsockopt(). However, when CONFIG_INET is disabled, it never gets called at all, and assigning a function to the callback pointer results in a link failure: net/bpfilter/bpfilter_kern.o: In function `__stop_umh': bpfilter_kern.c:(.text.unlikely+0x3): undefined reference to `bpfilter_process_sockopt' net/bpfilter/bpfilter_kern.o: In function `load_umh': bpfilter_kern.c:(.init.text+0x73): undefined reference to `bpfilter_process_sockopt' Since there is no caller in this configuration, I assume we can simply make the assignment conditional. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Salil Mehta says: ==================== Misc. bug fixes & some minor additions to HNS3 driver This patch-set provides some bug fixes figured out during testing and review. It also provides some additions due to running of the existing code on the new revision of the HNS3 hardware. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lijun Ou 提交于
When register a RoCE client with hnae3vf device, it needs to judge the device whether support RoCE vf function. Otherwise, it will lead to calltrace when RoCE is not support vf function and remove roce device. The calltrace as follows: [ 93.156614] Unable to handle kernel NULL pointer dereference at virtual address 00000015 <SNIP> [ 93.278784] Call trace: [ 93.278788] hnae3_match_n_instantiate+0x24/0xd8 [hnae3] [ 93.278790] hnae3_register_client+0xcc/0x150 [hnae3] [ 93.278801] hns_roce_hw_v2_init+0x18/0x1000 [hns_roce_hw_v2] [ 93.278805] do_one_initcall+0x58/0x160 [ 93.278807] do_init_module+0x64/0x1d8 [ 93.278809] load_module+0x135c/0x15c8 [ 93.278811] SyS_finit_module+0x100/0x118 [ 93.278816] __sys_trace_return+0x0/0x4 [ 93.278827] Code: aa0003f5 12001c56 aa1e03e0 d503201f (b9402660) Fixes: e2cb1dec ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Reported-by: NXinwei Kong <kong.kongxinwei@hisilicon.com> Reported-by: NZhou Wang <wangzhou1@hisilicon.com> Signed-off-by: NLijun Ou <oulijun@huawei.com> Signed-off-by: NZhou Wang <wangzhou1@hisilicon.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jian Shen 提交于
Firmware now supports control of all leds. Existing HNS3 driver code only supported led locate command over SFP Fibre ports. But now it is also supported over copper port. This patch removes existing not needed code for the led locate command and updates the led control command between driver and firmware. Signed-off-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jian Shen 提交于
In the previous implementation of led control for fibre port , parses the port speed configuration, checks the link status and traffic status per second, and updates the blink status of link led, traffic led and speed led. Now, the firmware takes responsibility to handle the led, the dirver just needs to deal with locate command. So the codes for link led, traffic led and speed led are useless now. This patch removes these redundant codes. Signed-off-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fuyun Liang 提交于
When we down the port, some packets are left in TX/RX buffer. When we up the port again, these old packets are forwarded to protocol stack or are sent to internet. It will make some problem. TX/RX buffer should be cleared when stopping port. This patch adds some function to ensure the buffer is clean when port is started. We should clear the rings when clients are being un-initialized as well. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: NFuyun Liang <liangfuyun1@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fuyun Liang 提交于
Our code will ensure that hns3_clear_tx_ring is not used to cleared RX rings and hns3_clear_rx_ring is not used to cleared TX rings. So the ring type check is unnecessary. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: NFuyun Liang <liangfuyun1@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fuyun Liang 提交于
RX Buffer Descriptor contains a VALID bit which indicates if the BD is valid and has some data. This field is set by HNS3 hardware to intimate the driver of some valid data present in the BD. nd should be reset by the driver when BD is being used again. In the existing code this bit was not being (re-)initialized properly and hence was causing problems. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: NFuyun Liang <liangfuyun1@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peng Li 提交于
HNAE3 module supports kernel nic driver, user nic driver and roce driver, and there are 3 client types. Driver uses one bit(HNAE3_CLIENT_INITED_B) to indicate the client initialization state, it will cause confusion for 3 client types. This patch fixes it by use 3 bits to indicate the initialization state. Fixes: 38caee9d ("net: hns3: Add support of the HNAE3 framework") Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xi Wang 提交于
Before the firmware updates the crq's tail pointer, if the PF driver reads the data in the crq, the data may be incomplete at this time, which will lead to the driver read an unknown message. This patch fixes it by checking if crq is not empty before reading the message. Fixes: c1a81619 ("net: hns3: Add mailbox interrupt handling to PF driver") Signed-off-by: NXi Wang <wangxi11@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peng Li 提交于
HCLGE_PROMISC_TX_EN_B and HCLGE_PROMISC_RX_EN_B are not supported on pdev revision(0x20), new revision(0x21) supports them. Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peng Li 提交于
Hardware Revision(0x21) Buffer Descriptor adds a field STRP_TAGP for vlan stripped processed indication. STRP_TAGP field has 2 bits, bit 0 is stripped indication of the vlan tag in outer vlan tag field, bit 1 is stripped indication of the vlan tag in inner vlan tag field. For each bit, 0 indicates the tag is not stripped and 1 indicates the tag is stripped. This patch adds STRP_TAGP support for revision(0x21), and does not change the revision(0x20) action. Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peng Li 提交于
HNS3 Hardware can support up to two VLAN tags in transmit leg, the PPP module can handle the packets based on the tag1 and tag2 config. This patch adds support for tag2 config for vlan handling Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peng Li 提交于
In the latest revision of the hardware, if a packet is spanning across multiple BDs then only VLD bit and current data size info is valid in each BD, and rest of the information is only valid in the last BD of the packet. In such case we should make sure we are fetching RX packet size from the first descriptor and information like VLAN should be fetched from last BD. Signed-off-by: NPeng Li <lipeng321@huawei.com> Reviewed-by: NYisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paolo Abeni 提交于
The struct Qdisc has a lot of holes, especially after commit a53851e2 ("net: sched: explicit locking in gso_cpu fallback"), which as a side effect, moved the fields just after 'busylock' on a new cacheline. Since both 'padded' and 'refcnt' are not updated frequently, and there is a hole before 'gso_skb', we can move such fields there, saving a cacheline without any performance side effect. Before this commit: pahole -C Qdisc net/sche/sch_generic.o # ... /* size: 384, cachelines: 6, members: 25 */ /* sum members: 236, holes: 3, sum holes: 92 */ /* padding: 56 */ After this commit: pahole -C Qdisc net/sche/sch_generic.o # ... /* size: 320, cachelines: 5, members: 25 */ /* sum members: 236, holes: 2, sum holes: 28 */ /* padding: 56 */ Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bjørn Mork 提交于
SIMCOM are reusing a single device ID for many (all of their?) different modems, based on different chipsets and firmwares. Newer Qualcomm chipset generations require setting DTR to wake the QMI function. The SIM7600E modem is using such a chipset, making it fail to work with this driver despite the device ID match. Fix by unconditionally enabling the SET_DTR quirk for all SIMCOM modems using this specific device ID. This is similar to what we already have done for another case of device IDs recycled over multiple chipset generations: 14cf4a77 ("drivers: net: usb: qmi_wwan: add QMI_QUIRK_SET_DTR for Telit PID 0x1201") Initial testing on an older SIM7100 modem shows no immediate side effects. Reported-by: NSebastian Sjoholm <sebastian.sjoholm@gmail.com> Cc: Reinhard Speyerer <rspmn@arcor.de> Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Christophe Roullier says: ==================== net: ethernet: stmmac: add support for stm32mp1 Patches to have Ethernet support on stm32mp1 ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christophe Roullier 提交于
This patch describes syscon DT bindings. Signed-off-by: NChristophe Roullier <christophe.roullier@st.com> Reviewed-by: NRob Herring <robh@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-