Architectures should fully validate whether kexec is possible as part of
machine_kexec_prepare(), so that user-space's kexec_load() operation can
report any problems. Performing validation in machine_kexec() itself is
too late, since it is not allowed to return.

Prior to this patch, ARM's machine_kexec() was testing after-the-fact
whether machine_kexec_prepare() was able to disable all but one CPU.
Instead, modify machine_kexec_prepare() to validate all conditions
necessary for machine_kexec_prepare()'s to succeed. BUG if the validation
succeeded, yet disabling the CPUs didn't actually work.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Commit 15e7e5c1 ("ARM: 7749/1: spinlock: retry trylock operation if
strex fails on free lock") modifying our arch_spin_trylock to retry the
acquisition if the lock appeared uncontended, but the strex failed.

This patch does the same for rwlocks, which were missed by the original
patch.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The res variable is written before we've finished with the input
operands (namely the lock address), so ensure that we mark it as `early
clobber' to avoid unintended register sharing.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Vince Weaver reports an oops in the ARM perf event code while
running his perf_fuzzer tool on a pandaboard running v3.11-rc4.

Unable to handle kernel paging request at virtual address 73fd14cc
pgd = eca6c000
[73fd14cc] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in: snd_soc_omap_hdmi omapdss snd_soc_omap_abe_twl6040 snd_soc_twl6040 snd_soc_omap snd_soc_omap_hdmi_card snd_soc_omap_mcpdm snd_soc_omap_mcbsp snd_soc_core snd_compress regmap_spi snd_pcm snd_page_alloc snd_timer snd soundcore
CPU: 1 PID: 2790 Comm: perf_fuzzer Not tainted 3.11.0-rc4 #6
task: eddcab80 ti: ed892000 task.ti: ed892000
PC is at armpmu_map_event+0x20/0x88
LR is at armpmu_event_init+0x38/0x280
pc : [<c001c3e4>]    lr : [<c001c17c>]    psr: 60000013
sp : ed893e40  ip : ecececec  fp : edfaec00
r10: 00000000  r9 : 00000000  r8 : ed8c3ac0
r7 : ed8c3b5c  r6 : edfaec00  r5 : 00000000  r4 : 00000000
r3 : 000000ff  r2 : c0496144  r1 : c049611c  r0 : edfaec00
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 10c5387d  Table: aca6c04a  DAC: 00000015
Process perf_fuzzer (pid: 2790, stack limit = 0xed892240)
Stack: (0xed893e40 to 0xed894000)
3e40: 00000800 c001c17c 00000002 c008a748 00000001 00000000 00000000 c00bf078
3e60: 00000000 edfaee50 00000000 00000000 00000000 edfaec00 ed8c3ac0 edfaec00
3e80: 00000000 c073ffac ed893f20 c00bf180 00000001 00000000 c00bf078 ed893f20
3ea0: 00000000 ed8c3ac0 00000000 00000000 00000000 c0cb0818 eddcab80 c00bf440
3ec0: ed893f20 00000000 eddcab80 eca76800 00000000 eca76800 00000000 00000000
3ee0: 00000000 ec984c80 eddcab80 c00bfe68 00000000 00000000 00000000 00000080
3f00: 00000000 ed892000 00000000 ed892030 00000004 ecc7e3c8 ecc7e3c8 00000000
3f20: 00000000 00000048 ecececec 00000000 00000000 00000000 00000000 00000000
3f40: 00000000 00000000 00297810 00000000 00000000 00000000 00000000 00000000
3f60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
3f80: 00000002 00000002 000103a4 00000002 0000016c c00128e8 ed892000 00000000
3fa0: 00090998 c0012700 00000002 000103a4 00090ab8 00000000 00000000 0000000f
3fc0: 00000002 000103a4 00000002 0000016c 00090ab0 00090ab8 000107a0 00090998
3fe0: bed92be0 bed92bd0 0000b785 b6e8f6d0 40000010 00090ab8 00000000 00000000
[<c001c3e4>] (armpmu_map_event+0x20/0x88) from [<c001c17c>] (armpmu_event_init+0x38/0x280)
[<c001c17c>] (armpmu_event_init+0x38/0x280) from [<c00bf180>] (perf_init_event+0x108/0x180)
[<c00bf180>] (perf_init_event+0x108/0x180) from [<c00bf440>] (perf_event_alloc+0x248/0x40c)
[<c00bf440>] (perf_event_alloc+0x248/0x40c) from [<c00bfe68>] (SyS_perf_event_open+0x4f4/0x8fc)
[<c00bfe68>] (SyS_perf_event_open+0x4f4/0x8fc) from [<c0012700>] (ret_fast_syscall+0x0/0x48)
Code: 0a000005 e3540004 0a000016 e3540000 (0791010c)

This is because event->attr.config in armpmu_event_init()
contains a very large number copied directly from userspace and
is never checked against the size of the array indexed in
armpmu_map_hw_event(). Fix the problem by checking the value of
config before indexing the array and rejecting invalid config
values.
Reported-by: NVince Weaver <vincent.weaver@maine.edu>
Tested-by: NVince Weaver <vincent.weaver@maine.edu>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

It is possible to construct an event group with a software event as a
group leader and then subsequently add a hardware event to the group.
This results in the event group being validated by adding all members
of the group to a fake PMU and attempting to allocate each event on
their respective PMU.

Unfortunately, for software events wthout a corresponding arm_pmu, this
results in a kernel crash attempting to dereference the ->get_event_idx
function pointer.

This patch fixes the problem by checking explicitly for software events
and ignoring those in event validation (since they can always be
scheduled). We will probably want to revisit this for 3.12, since the
validation checks don't appear to work correctly when dealing with
multiple hardware PMUs anyway.

Cc: <stable@vger.kernel.org>
Reported-by: NVince Weaver <vincent.weaver@maine.edu>
Tested-by: NVince Weaver <vincent.weaver@maine.edu>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Aaro Koskinen reports the following oops:
Installing fiq handler from c001b110, length 0x164
Unable to handle kernel paging request at virtual address ffff1224
pgd = c0004000
[ffff1224] *pgd=00000000, *pte=11fff0cb, *ppte=11fff00a
...
[<c0013154>] (set_fiq_handler+0x0/0x6c) from [<c0365d38>] (ams_delta_init_fiq+0xa8/0x160)
 r6:00000164 r5:c001b110 r4:00000000 r3:fefecb4c
[<c0365c90>] (ams_delta_init_fiq+0x0/0x160) from [<c0365b14>] (ams_delta_init+0xd4/0x114)
 r6:00000000 r5:fffece10 r4:c037a9e0
[<c0365a40>] (ams_delta_init+0x0/0x114) from [<c03613b4>] (customize_machine+0x24/0x30)

This is because the vectors page is now write-protected, and to change
code in there we must write to its original alias.  Make that change,
and adjust the cache flushing such that the code will become visible
to the instruction stream on VIVT CPUs.
Reported-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Fix yet another build failure caused by a weird set of configuration
settings:

  LD      init/built-in.o
arch/arm/kernel/built-in.o: In function `__dabt_usr':
/home/tom3q/kernel/arch/arm/kernel/entry-armv.S:377: undefined reference to `kuser_cmpxchg64_fixup'
arch/arm/kernel/built-in.o: In function `__irq_usr':
/home/tom3q/kernel/arch/arm/kernel/entry-armv.S:387: undefined reference to `kuser_cmpxchg64_fixup'

caused by:
CONFIG_KUSER_HELPERS=n
CONFIG_CPU_32v6K=n
CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG=n
Reported-by: NTomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Olof reports that noMMU builds error out with:

arch/arm/kernel/signal.c: In function 'setup_return':
arch/arm/kernel/signal.c:413:25: error: 'mm_context_t' has no member named 'sigpage'

This shows one of the evilnesses of IS_ENABLED().  Get rid of it here
and replace it with #ifdef's - and as no noMMU platform can make use
of sigpage, depend on CONIFG_MMU not CONFIG_ARM_MPU.
Reported-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Unfortunately, I never committed the fix to a nasty oops which can
occur as a result of that commit:

------------[ cut here ]------------
kernel BUG at /home/olof/work/batch/include/linux/mm.h:414!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 490 Comm: killall5 Not tainted 3.11.0-rc3-00288-gabe03080 #53
task: e90acac0 ti: e9be8000 task.ti: e9be8000
PC is at special_mapping_fault+0xa4/0xc4
LR is at __do_fault+0x68/0x48c

This doesn't show up unless you do quite a bit of testing; a simple
boot test does not do this, so all my nightly tests were passing fine.

The reason for this is that install_special_mapping() expects the
page array to stick around, and as this was only inserting one page
which was stored on the kernel stack, that's why this was blowing up.
Reported-by: NOlof Johansson <olof@lixom.net>
Tested-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Commit 8bd26e3a (arm: delete __cpuinit/__CPUINIT usage from all ARM
users) caused some code to leak into sections which are discarded
through the removal of __CPUINIT annotations.  Add appropriate .text
annotations to bring these back into the kernel text.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

If one process calls sys_reboot and that process then stops other
CPUs while those CPUs are within a spin_lock() region we can
potentially encounter a deadlock scenario like below.

CPU 0                   CPU 1
-----                   -----
                        spin_lock(my_lock)
smp_send_stop()
 <send IPI>             handle_IPI()
                         disable_preemption/irqs
                          while(1);
 <PREEMPT>
spin_lock(my_lock) <--- Waits forever

We shouldn't attempt to run any other tasks after we send a stop
IPI to a CPU so disable preemption so that this task runs to
completion. We use local_irq_disable() here for cross-arch
consistency with x86.
Reported-by: NSundarajan Srinivasan <sundaraj@codeaurora.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

If kuser helpers are not provided by the kernel, disable user access to
the vectors page.  With the kuser helpers gone, there is no reason for
this page to be visible to userspace.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Move the signal handlers into a VDSO page rather than keeping them in
the vectors page.  This allows us to place them randomly within this
page, and also map the page at a random location within userspace
further protecting these code fragments from ROP attacks.  The new
VDSO page is also poisoned in the same way as the vector page.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Provide a kernel configuration option to allow the kernel user helpers
to be removed from the vector page, thereby preventing their use with
ROP (return orientated programming) attacks.  This option is only
visible for CPU architectures which natively support all the operations
which kernel user helpers would normally provide, and must be enabled
with caution.

Cc: <stable@vger.kernel.org>
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

FIQ should no longer copy the FIQ code into the user visible vector
page.  Instead, it should use the hidden page.  This change makes
that happen.

Cc: <stable@vger.kernel.org>
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Use linker magic to create the vectors and vector stubs: we can tell the
linker to place them at an appropriate VMA, but keep the LMA within the
kernel.  This gets rid of some unnecessary symbol manipulation, and
have the linker calculate the relocations appropriately.

Cc: <stable@vger.kernel.org>
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Move the machine vector stubs into the page above the vector page,
which we can prevent from being visible to userspace.  Also move
the reset stub, and place the swi vector at a location that the
'ldr' can get to it.

This hides pointers into the kernel which could give valuable
information to attackers, and reduces the number of exploitable
instructions at a fixed address.

Cc: <stable@vger.kernel.org>
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Poison the memory between each kuser helper.  This ensures that any
branch between the kuser helpers will be appropriately trapped.

Cc: <stable@vger.kernel.org>
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Fill the empty regions of the vectors page with an exception generating
instruction.  This ensures that any inappropriate branch to the vector
page is appropriately trapped, rather than just encountering some code
to execute.  (The vectors page was filled with zero before, which
corresponds with the "andeq r0, r0, r0" instruction - a no-op.)

Cc: <stable@vger.kernel.org>
Acked-by Nicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Commit 621a0147 ("ARM: 7757/1: mm:
don't flush icache in switch_mm with hardware broadcasting") breaks
the boot on OMAP2430SDP with omap2plus_defconfig.  Tracked to an
undefined instruction abort from the CP15 read in
cache_ops_need_broadcast().  It turns out that gcc 4.5 reorders the
extended CP15 read above the is_smp() test.  This breaks ARM1136 r0
cores, since they don't support several CP15 registers that later ARM
cores do.  ARM1136JF-S TRM section 3.2.1 "Register allocation" has the
details.

So mark the extended CP15 read as clobbering memory, which prevents
the compiler from reordering it before the is_smp() test.  Russell
states that the code generated from this approach is preferable to
marking the inline asm as volatile.  Remove the existing condition
code clobber as it's obsolete, per Nico's post:

    http://www.spinics.net/lists/arm-kernel/msg261208.html

This patch is a collaboration with Will Deacon and Russell King.

Comments from Paul Walmsley:

 Russell, if you accept this one, might you also add Will's ack from the lists:

Comments from Paul Walmsley:

 I'd also be obliged if you could add a Cc: line for Jonathan Austin, since he helped test:
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Tony Lindgren <tony@atomide.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Cc: Jonathan Austin <jonathan.austin@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The name changed in response to review comments for the nvic irqchip
driver when the original name was already accepted into Russell King's
tree.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

So, there's a comment I put at the top of this, which people seem to
fail to read.  So let's fix it for them instead.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

a.out support on ARM requires that argc, argv and envp are passed in
r0-r2 respectively, which requires hacking load_aout_binary to
prevent argc being clobbered by the return code. Whilst mainline kernels
do set the registers up in start_thread, the aout loader has never
carried the hack in mainline.

Initialising the registers in this way actually goes against the libc
expectations for ELF binaries, where argc, argv and envp are passed on
the stack, with r0 being used to hold a pointer to an exit function for
cleaning up after the dynamic linker if required. If the pointer is
NULL, then it is ignored. When execing an ELF binary, Linux currently
zeroes r0, then sets it to argc and then finally clobbers it with the
return value of the execve syscall, so we actually end up with:

	r0 = 0
	stack[0] = argc
	r1 = stack[1] = argv
	r2 = stack[2] = envp

libc treats r1 and r2 as undefined. The clobbering of r0 by sys_execve
works for user-spawned threads, but when executing an ELF binary from a
kernel thread (via call_usermodehelper), the execve is performed on the
ret_from_fork path, which restores r0 from the saved pt_regs, resulting
in argc being presented to the C library. This has horrible consequences
when the application exits, since we have an exit function registered
using argc, resulting in a jump to hyperspace.

This patch solves the problem by removing the partial a.out support from
arch/arm/ altogether.

Cc: <stable@vger.kernel.org>
Cc: Ashish Sangwan <ashishsangwan2@gmail.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

As of commit b9d4d42a (ARM: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW on
pre-ARMv6 CPUs), the mm switching on VIVT processors is done in the
finish_arch_post_lock_switch() function to avoid whole cache flushing
with interrupts disabled. The need for deferred mm switch is stored as a
thread flag (TIF_SWITCH_MM). However, with preemption enabled, we can
have another thread switch before finish_arch_post_lock_switch(). If the
new thread has the same mm as the previous 'next' thread, the scheduler
will not call switch_mm() and the TIF_SWITCH_MM flag won't be set for
the new thread.

This patch moves the switch pending flag to the mm_context_t structure
since this is specific to the mm rather than thread.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Reported-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Tested-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Cc: <stable@vger.kernel.org> # 3.5+
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Commit 93dc6887 (ARM: 7684/1: errata: Workaround for Cortex-A15 erratum 798181 (TLBI/DSB operations)) causes the following undefined instruction error on a mx53 (Cortex-A8):

Internal error: Oops - undefined instruction: 0 [#1] SMP ARM
CPU: 0 PID: 275 Comm: modprobe Not tainted 3.11.0-rc2-next-20130722-00009-g9b0f371 #881
task: df46cc00 ti: df48e000 task.ti: df48e000
PC is at check_and_switch_context+0x17c/0x4d0
LR is at check_and_switch_context+0xdc/0x4d0

This problem happens because check_and_switch_context() calls dummy_flush_tlb_a15_erratum() without checking if we are really running on a Cortex-A15 or not.

To avoid this issue, only call dummy_flush_tlb_a15_erratum() inside
check_and_switch_context() if erratum_a15_798181() returns true, which means that we are really running on a Cortex-A15.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Secondary CPUs write to __boot_cpu_mode with caches disabled, and thus a
cached value of __boot_cpu_mode may be incoherent with that in memory.
This could lead to a failure to detect mismatched boot modes.

This patch adds flushing to ensure that writes by secondaries to
__boot_cpu_mode are made visible before we test against it.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: NDave Martin <Dave.Martin@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <cdall@cs.columbia.edu>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Commit a469abd0 ("ARM: elf: add new hwcap for identifying atomic
ldrd/strd instructions") added a new hwcap to identify LPAE on CPUs
which support it. Whilst the hwcap data is correct, the string reported
in /proc/cpuinfo actually matches on HWCAP_VFPD32, which was missing
an entry in the string table.

This patch fixes this problem by adding a "vfpd32" string at the correct
offset, preventing us from falsely advertising LPAE on CPUs which do not
support it.

[will: added commit message]
Acked-by: NWill Deacon <will.deacon@arm.com>
Tested-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NTetsuyuki Kobayashi <koba@kmckk.co.jp>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Currently, compare_cpu_mode_with_primary uses a mixture of macro
arguments and hardcoded registers, and does so incorrectly, as it
stores (__boot_cpu_mode_offset | BOOT_CPU_MODE_MISMATCH) to
(__boot_cpu_mode + &__boot_cpu_mode_offset), which could corrupt an
arbitrary portion of memory.

This patch fixes up compare_cpu_mode_with_primary to use the macro
arguments, correctly updating __boot_cpu_mode.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: NDave Martin <Dave.Martin@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <cdall@cs.columbia.edu>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

When map_lowmem() runs, and processes a memory bank whose start or end
is not section-aligned, memory must be allocated to store the 2nd-level
page tables. Those allocations are made by calling memblock_alloc().

At this point, the only memory that is free *and* mapped is memory which
has already been mapped by map_lowmem() itself. For this reason, we must
calculate the first point at which map_lowmem() will need to allocate
memory, and set the memblock allocation limit to a lower address, so that
memblock_alloc() is guaranteed to return memory that is already mapped.

This patch enhances sanity_check_meminfo() to calculate that memory
address, and pass it to memblock_set_current_limit(), rather than just
assuming the limit is arm_lowmem_limit.

The algorithm applied is:

* Default memblock_limit to arm_lowmem_limit in the absence of any other
  limit; arm_lowmem_limit is the highest memory that is mapped by
  map_lowmem().

* While walking the list of memblocks, if the start of a block is not
  aligned, 2nd-level page tables will need to be allocated to map the
  first few pages of the block. Hence, the memblock_limit must be before
  the start of the block.

* Similarly, if the end of any block is not aligned, 2nd-level page
  tables will need to be allocated to map the last few pages of the
  block. Hence, the memblock_limit must point at the end of the block,
  rounded down to section-alignment.

* The memory blocks are assumed to be sorted in address order, so the
  first unaligned block start or end is used to set the limit.

With this algorithm, the start or end of almost any bank can be non-
section-aligned. The only exception is that the start of bank 0 must
be section-aligned, since otherwise memory would need to be allocated
when mapping the start of bank 0, which occurs before any free memory
is mapped.

[swarren, wrote commit description, rewrote calculation of memblock_limit]
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Commit ae8a8b95 ("ARM: 7691/1: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE
and use ALT_SMP instead") added early function returns for page table
cache flushing operations on ARMv7 SMP CPUs.

Unfortunately, when targetting Thumb-2, these `mov pc, lr' sequences
assemble to 2 bytes which can lead to corruption of the instruction
stream after code patching.

This patch fixes the alternates to use wide (32-bit) instructions for
Thumb-2, therefore ensuring that the patching code works correctly.

Cc: <stable@vger.kernel.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This non-user visible option lacked any kind of documentation.  This
is quite common for non-user visible options; certian people can't
understand the point of documenting such options with help text.

However, here we have a case in point: developers don't understand the
option either, as they were thinking that when the option is not set,
the decompressor should produce no output what so ever.  This is
incorrect, as the purpose of this option is to control whether a
multiplatform kernel uses the kernel debugging macros to produce
output or not.

So let's document this via help rather than commentry to prevent others
falling into this misunderstanding.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Pull ACPI video support fixes from Rafael Wysocki:
 "I'm sending a separate pull request for this as it may be somewhat
  controversial.  The breakage addressed here is not really new and the
  fixes may not satisfy all users of the affected systems, but we've had
  so much back and forth dance in this area over the last several weeks
  that I think it's time to actually make some progress.

  The source of the problem is that about a year ago we started to tell
  BIOSes that we're compatible with Windows 8, which we really need to
  do, because some systems shipping with Windows 8 are tested with it
  and nothing else, so if we tell their BIOSes that we aren't compatible
  with Windows 8, we expose our users to untested BIOS/AML code paths.

  However, as it turns out, some Windows 8-specific AML code paths are
  not tested either, because Windows 8 actually doesn't use the ACPI
  methods containing them, so if we declare Windows 8 compatibility and
  attempt to use those ACPI methods, things break.  That occurs mostly
  in the backlight support area where in particular the _BCM and _BQC
  methods are plain unusable on some systems if the OS declares Windows
  8 compatibility.

  [ The additional twist is that they actually become usable if the OS
    says it is not compatible with Windows 8, but that may cause
    problems to show up elsewhere ]

  Investigation carried out by Matthew Garrett indicates that what
  Windows 8 does about backlight is to leave backlight control up to
  individual graphics drivers.  At least there's evidence that it does
  that if the Intel graphics driver is used, so we've decided to follow
  Windows 8 in that respect and allow i915 to control backlight (Daniel
  likes that part).

  The first commit from Aaron Lu makes ACPICA export the variable from
  which we can infer whether or not the BIOS believes that we are
  compatible with Windows 8.

  The second commit from Matthew Garrett prepares the ACPI video driver
  by making it initialize the ACPI backlight even if it is not going to
  be used afterward (that is needed for backlight control to work on
  Thinkpads).

  The third commit implements the actual workaround making i915 take
  over backlight control if the firmware thinks it's dealing with
  Windows 8 and is based on the work of multiple developers, including
  Matthew Garrett, Chun-Yi Lee, Seth Forshee, and Aaron Lu.

  The final commit from Aaron Lu makes us follow Windows 8 by informing
  the firmware through the _DOS method that it should not carry out
  automatic brightness changes, so that brightness can be controlled by
  GUI.

  Hopefully, this approach will allow us to avoid using blacklists of
  systems that should not declare Windows 8 compatibility just to avoid
  backlight control problems in the future.

   - Change from Aaron Lu makes ACPICA export a variable which can be
     used by driver code to determine whether or not the BIOS believes
     that we are compatible with Windows 8.

   - Change from Matthew Garrett makes the ACPI video driver initialize
     the ACPI backlight even if it is not going to be used afterward
     (that is needed for backlight control to work on Thinkpads).

   - Fix from Rafael J Wysocki implements Windows 8 backlight support
     workaround making i915 take over bakclight control if the firmware
     thinks it's dealing with Windows 8.  Based on the work of multiple
     developers including Matthew Garrett, Chun-Yi Lee, Seth Forshee,
     and Aaron Lu.

   - Fix from Aaron Lu makes the kernel follow Windows 8 by informing
     the firmware through the _DOS method that it should not carry out
     automatic brightness changes, so that brightness can be controlled
     by GUI"

* tag 'acpi-video-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / video: no automatic brightness changes by win8-compatible firmware
  ACPI / video / i915: No ACPI backlight if firmware expects Windows 8
  ACPI / video: Always call acpi_video_init_brightness() on init
  ACPICA: expose OSI version

Pull ext[34] tmpfile bugfix from Ted Ts'o:
 "Fix regression caused by commit af51a2ac which added ->tmpfile()
  support (along with a similar fix for ext3)"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext3: fix a BUG when opening a file with O_TMPFILE flag
  ext4: fix a BUG when opening a file with O_TMPFILE flag

When we try to open a file with O_TMPFILE flag, we will trigger a bug.
The root cause is that in ext4_orphan_add() we check ->i_nlink == 0 and
this check always fails because we set ->i_nlink = 1 in
inode_init_always().  We can use the following program to trigger it:

int main(int argc, char *argv[])
{
	int fd;

	fd = open(argv[1], O_TMPFILE, 0666);
	if (fd < 0) {
		perror("open ");
		return -1;
	}
	close(fd);
	return 0;
}

The oops message looks like this:

kernel: kernel BUG at fs/ext3/namei.c:1992!
kernel: invalid opcode: 0000 [#1] SMP
kernel: Modules linked in: ext4 jbd2 crc16 cpufreq_ondemand ipv6 dm_mirror dm_region_hash dm_log dm_mod parport_pc parport serio_raw sg dcdbas pcspkr i2c_i801 ehci_pci ehci_hcd button acpi_cpufreq mperf e1000e ptp pps_core ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core ext3 jbd sd_mod ahci libahci libata scsi_mod uhci_hcd
kernel: CPU: 0 PID: 2882 Comm: tst_tmpfile Not tainted 3.11.0-rc1+ #4
kernel: Hardware name: Dell Inc. OptiPlex 780 /0V4W66, BIOS A05 08/11/2010
kernel: task: ffff880112d30050 ti: ffff8801124d4000 task.ti: ffff8801124d4000
kernel: RIP: 0010:[<ffffffffa00db5ae>] [<ffffffffa00db5ae>] ext3_orphan_add+0x6a/0x1eb [ext3]
kernel: RSP: 0018:ffff8801124d5cc8  EFLAGS: 00010202
kernel: RAX: 0000000000000000 RBX: ffff880111510128 RCX: ffff8801114683a0
kernel: RDX: 0000000000000000 RSI: ffff880111510128 RDI: ffff88010fcf65a8
kernel: RBP: ffff8801124d5d18 R08: 0080000000000000 R09: ffffffffa00d3b7f
kernel: R10: ffff8801114683a0 R11: ffff8801032a2558 R12: 0000000000000000
kernel: R13: ffff88010fcf6800 R14: ffff8801032a2558 R15: ffff8801115100d8
kernel: FS:  00007f5d172b5700(0000) GS:ffff880117c00000(0000) knlGS:0000000000000000
kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
kernel: CR2: 00007f5d16df15d0 CR3: 0000000110b1d000 CR4: 00000000000407f0
kernel: Stack:
kernel: 000000000000000c ffff8801048a7dc8 ffff8801114685a8 ffffffffa00b80d7
kernel: ffff8801124d5e38 ffff8801032a2558 ffff88010ce24d68 0000000000000000
kernel: ffff88011146b300 ffff8801124d5d44 ffff8801124d5d78 ffffffffa00db7e1
kernel: Call Trace:
kernel: [<ffffffffa00b80d7>] ? journal_start+0x8c/0xbd [jbd]
kernel: [<ffffffffa00db7e1>] ext3_tmpfile+0xb2/0x13b [ext3]
kernel: [<ffffffff821076f8>] path_openat+0x11f/0x5e7
kernel: [<ffffffff821c86b4>] ? list_del+0x11/0x30
kernel: [<ffffffff82065fa2>] ?  __dequeue_entity+0x33/0x38
kernel: [<ffffffff82107cd5>] do_filp_open+0x3f/0x8d
kernel: [<ffffffff82112532>] ? __alloc_fd+0x50/0x102
kernel: [<ffffffff820f9296>] do_sys_open+0x13b/0x1cd
kernel: [<ffffffff820f935c>] SyS_open+0x1e/0x20
kernel: [<ffffffff82398c02>] system_call_fastpath+0x16/0x1b
kernel: Code: 39 c7 0f 85 67 01 00 00 0f b7 03 25 00 f0 00 00 3d 00 40 00 00 74 18 3d 00 80 00 00 74 11 3d 00 a0 00 00 74 0a 83 7b 48 00 74 04 <0f> 0b eb fe 49 8b 85 50 03 00 00 4c 89 f6 48 c7 c7 c0 99 0e a0
kernel: RIP  [<ffffffffa00db5ae>] ext3_orphan_add+0x6a/0x1eb [ext3]
kernel: RSP <ffff8801124d5cc8>

Here we couldn't call clear_nlink() directly because in d_tmpfile() we
will call inode_dec_link_count() to decrease ->i_nlink.  So this commit
tries to call d_tmpfile() before ext4_orphan_add() to fix this problem.
Signed-off-by: NZheng Liu <wenqing.lz@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>

When we try to open a file with O_TMPFILE flag, we will trigger a bug.
The root cause is that in ext4_orphan_add() we check ->i_nlink == 0 and
this check always fails because we set ->i_nlink = 1 in
inode_init_always().  We can use the following program to trigger it:

int main(int argc, char *argv[])
{
	int fd;

	fd = open(argv[1], O_TMPFILE, 0666);
	if (fd < 0) {
		perror("open ");
		return -1;
	}
	close(fd);
	return 0;
}

The oops message looks like this:

kernel BUG at fs/ext4/namei.c:2572!
invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Modules linked in: dlci bridge stp hidp cmtp kernelcapi l2tp_ppp l2tp_netlink l2tp_core sctp libcrc32c rfcomm tun fuse nfnetli
nk can_raw ipt_ULOG can_bcm x25 scsi_transport_iscsi ipx p8023 p8022 appletalk phonet psnap vmw_vsock_vmci_transport af_key vmw_vmci rose vsock atm can netrom ax25 af_rxrpc ir
da pppoe pppox ppp_generic slhc bluetooth nfc rfkill rds caif_socket caif crc_ccitt af_802154 llc2 llc snd_hda_codec_realtek snd_hda_intel snd_hda_codec serio_raw snd_pcm pcsp
kr edac_core snd_page_alloc snd_timer snd soundcore r8169 mii sr_mod cdrom pata_atiixp radeon backlight drm_kms_helper ttm
CPU: 1 PID: 1812571 Comm: trinity-child2 Not tainted 3.11.0-rc1+ #12
Hardware name: Gigabyte Technology Co., Ltd. GA-MA78GM-S2H/GA-MA78GM-S2H, BIOS F12a 04/23/2010
task: ffff88007dfe69a0 ti: ffff88010f7b6000 task.ti: ffff88010f7b6000
RIP: 0010:[<ffffffff8125ce69>]  [<ffffffff8125ce69>] ext4_orphan_add+0x299/0x2b0
RSP: 0018:ffff88010f7b7cf8  EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff8800966d3020 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff88007dfe70b8 RDI: 0000000000000001
RBP: ffff88010f7b7d40 R08: ffff880126a3c4e0 R09: ffff88010f7b7ca0
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801271fd668
R13: ffff8800966d2f78 R14: ffff88011d7089f0 R15: ffff88007dfe69a0
FS:  00007f70441a3740(0000) GS:ffff88012a800000(0000) knlGS:00000000f77c96c0
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000002834000 CR3: 0000000107964000 CR4: 00000000000007e0
DR0: 0000000000780000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
Stack:
 0000000000002000 00000020810b6dde 0000000000000000 ffff88011d46db00
 ffff8800966d3020 ffff88011d7089f0 ffff88009c7f4c10 ffff88010f7b7f2c
 ffff88007dfe69a0 ffff88010f7b7da8 ffffffff8125cfac ffff880100000004
Call Trace:
 [<ffffffff8125cfac>] ext4_tmpfile+0x12c/0x180
 [<ffffffff811cba78>] path_openat+0x238/0x700
 [<ffffffff8100afc4>] ? native_sched_clock+0x24/0x80
 [<ffffffff811cc647>] do_filp_open+0x47/0xa0
 [<ffffffff811db73f>] ? __alloc_fd+0xaf/0x200
 [<ffffffff811ba2e4>] do_sys_open+0x124/0x210
 [<ffffffff81010725>] ? syscall_trace_enter+0x25/0x290
 [<ffffffff811ba3ee>] SyS_open+0x1e/0x20
 [<ffffffff816ca8d4>] tracesys+0xdd/0xe2
 [<ffffffff81001001>] ? start_thread_common.constprop.6+0x1/0xa0
Code: 04 00 00 00 89 04 24 31 c0 e8 c4 77 04 00 e9 43 fe ff ff 66 25 00 d0 66 3d 00 80 0f 84 0e fe ff ff 83 7b 48 00 0f 84 04 fe ff ff <0f> 0b 49 8b 8c 24 50 07 00 00 e9 88 fe ff ff 0f 1f 84 00 00 00

Here we couldn't call clear_nlink() directly because in d_tmpfile() we
will call inode_dec_link_count() to decrease ->i_nlink.  So this commit
tries to call d_tmpfile() before ext4_orphan_add() to fix this problem.
Reported-by: NDave Jones <davej@redhat.com>
Signed-off-by: NZheng Liu <wenqing.lz@taobao.com>
Tested-by: NDarrick J. Wong <darrick.wong@oracle.com>
Tested-by: NDave Jones <davej@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Acked-by: NAl Viro <viro@zeniv.linux.org.uk>