- 18 2月, 2008 4 次提交
-
-
由 Hermann Pitton 提交于
Thanks to Angelo Lisco for his initial patch we missed and to Ahmet Dogan Ugurel confirming such a device functional. Signed-off-by: NHermann Pitton <hermann-pitton@arcor.de> Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hermann Pitton 提交于
This adds support for analog inputs and DVB-T. Good sensitivity for DVB-T currently needs to use analog TV first. DVB-S support is not yet completed, but is on the way. Signed-off-by: NHermann Pitton <hermann-pitton@arcor.de> Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hermann Pitton 提交于
It also enumerates now the separate composite input at first and adds mute ability to radio and external audio-in. Many thanks to Daftcho Tabakov for reporting the flaws and testing. Signed-off-by: NHermann Pitton <hermann-pitton@arcor.de> Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hermann Pitton 提交于
S-Video is unconfirmed, but likely correct. The remote is not yet investigated. Thanks go to Sioux for providing code and asking to fix the auto detection. Signed-off-by: Nsioux <sioux_it@libero.it> Signed-off-by: NHermann Pitton <hermann-pitton@arcor.de> Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 26 1月, 2008 10 次提交
-
-
由 Hermann Pitton 提交于
Thanks go to Mark Schultz for the initial contribution and to Dean Hilkewich for testing it again. Signed-off-by: NHermann Pitton <hermann-pitton@arcor.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hermann Pitton 提交于
saa7134: remove the Avermedia Super 007 from eeprom detection The card made it into the Philips' Tigers eeprom detection and falls through. Since it has attracted already others to follow, which are wrongly identified as TIGER_S then, move it to the usual analog initialization. Signed-off-by: NHermann Pitton <hermann-pitton@arcor.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 hermann pitton 提交于
As in the past, we should not allow to auto detect like this, since all saa7130 and saa7134 cards without eeprom will be detected as such Beholder cards then. Signed-off-by: NHermann Pitton <hermann-pitton@arcor.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Acked-by: NAndrey J. Melnikov <temnota@kmv.ru> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
This patch updates cardlist for Beholder TV tuners: old models (with GPIO ir) 401, 403, 405, 407, 409, 505, 507 and add support for 607, 609, M6 cards with new i2c-ir. Signed-off-by: NIgor Kuznetsov <igk72@yandex.ru> Signed-off-by: NAndrey J. Melnikov <temnota@kmv.ru> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Albert Graham 提交于
This patch enabled the IR remote control for the Avermedia M102 (card=110), which appears to be the same IR as the already supported device on the Avermedia AVerTV GO 007 FM (card=57) model, the code is two one liners which enable the IR for this device (subsystem: 1461:f31e) Signed-off-by: NAlbert Graham <agraham@g-b.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hermann Pitton 提交于
Currently the saa7134 chips only have mute support for the TV input. Cards with mute from external audio muxes are already fine on the other inputs and some recent tuners mute at least the radio on exit. But these mostly hybrid tuners are not fully backward compatible, since they must power down and mute regardless. For some included above, the MD7134 knows several, to switch on mute/automute to the TV input is functional and backward compatible for the applications, except that the tuners with tda9887 always mute on exit. Signed-off-by: NHermann Pitton <hermann-pitton@arcor.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Increased size of dev->eedata from 128 to 256, since the Hauppauge data begins at byte 128. This has been tested on boards with smaller eeproms, and caused no problems. Added comments to distinguish between the various versions of the HVR1110. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Currently, the only tuner-specific device that allows special configurations is tda9887. However, tea5767 also may require some special configurations (for example, to specify a different Xtal freq). This patch replaces TDA9887_SET_CONFIG by a more generic internal ioctl (TUNER_SET_CONFIG). The newer one allows specifying what tuner is appliable to a configuration set, and allows an arbitrary configuration struct. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 14 12月, 2007 1 次提交
-
-
由 Michael Krufky 提交于
Thanks to Hermann Pitton for noticing that this was missing. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Cc: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 12 12月, 2007 1 次提交
-
-
由 Hermann Pitton 提交于
The vmux for composite over s-video input was wrong. Signed-off-by: NHermann Pitton <hermann-pitton@arcor.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 05 11月, 2007 1 次提交
-
-
由 hermann pitton 提交于
saa7134: fix analog audio in on medion md8800 quadro, aka CTX944 Signed-off-by: NHermann Pitton <hermann-pitton@arcor.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 10 10月, 2007 5 次提交
-
-
由 Eric Sandeen 提交于
Recognize the KWorld ATSC115 PCI ID as a hardware clone of the ATSC110. Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
This is a Lifeview hybrid OEM board. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Stas Sergeev 提交于
AverTV Studio 307 has only one composite input. Signed-off-by: NStas Sergeev <stsp@aknet.ru> Acked-by: NNickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Simon Farnsworth 提交于
Fix SVideo input on KWorld DVB-T 220 boards. Without this patch, the luma pin on the SVideo input is treated as a composite in, and the chroma pin is ignored. Also, fix the radio, and provide a second composite input for people who are used to the existing composite on SVideo connector behaviour. Signed-off-by: NSimon Farnsworth <simon.farnsworth@onelan.co.uk> Reviewed-by: NHermann Pitton <hermann-pitton@arcor.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Edgar Simo 提交于
Add DVB-T support for Avermedia Super 007 Analog television is untested. The device lacks input adapters for radio, svideo & composite -- seems to be a DVB-T ONLY device. Signed-off-by: NEdgar Simo <bobbens@gmail.com> Acked-by: NHermann Pitton <hermann-pitton@arcor.de> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 15 9月, 2007 1 次提交
-
-
由 Stas Sergeev 提交于
Right now the composite sound input doesn't work on AverTV 307 because of the wrong mux setup. The composite sound is routed via an external 4channel multiplexer controlled by GPIO, while the code assumes an internal multiplexer instead. Presumably this was a copy/paste error, and noone have ever tested the functionality. With the attached patch it works properly, which gives me an ability to finally watch the cable TV under linux. Signed-off-by: NStas Sergeev <stsp@aknet.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Acked-by: NNickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 19 7月, 2007 3 次提交
-
-
由 Rafał Bilski 提交于
Sound recording doesn't work for this card because ACNI and ACPF are not set before snd_card_saa7134_capture_prepare(). As a result timeout occurs. These registers aren't poked because thread never gets wake up signal. ACNI initialization is done in the thread. Sound is muted when capture stops. Shouldn't be because it may be used during TV playback. Signed-off-by: NRafal Bilski <rafalbilski@interia.pl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Tony Wan 提交于
Using Encore's key codes, we needn't add any additional key table. Signed-off-by: NTony Wan <wankai@sjtu.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Tony Wan 提交于
Support the 10moons TM300 TV card (so called TV Master 3), which is a 10moons saa7130 based board. Here not include features for the IR-remote. It has been tested using TVTIME. The card was auto-detected and all the input sources worked correct with sound. Signed-off-by: NTony Wan <wankai@sjtu.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 09 5月, 2007 2 次提交
-
-
由 James T Klaas 提交于
Maintainer's notice: I needed to re-number the board, since the board number conflicted with a patch committed previously. Signed-off-by: NJames T Klaas <jklaas@appalachian.dyndns.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Simon Farnsworth 提交于
Add support for the "Elitegroup ECS TVP3XP FM1246", the "KWorld DVB-T 210", and the Animation Technologies LR214 Rev F onwards (SAA7131) to the saa7134 driver. Also rename the LR214WF to the LR214 Rev E or ealier (SAA7135), to match what we've seen on boards in the field. Changed the comment on the Lifeview cards to indicate Rev E and earlier versus Rev F and later, together with a chip indicator, following feedback from Peter Missel <peter.missel@onlinehome.de>. Signed-off-by: NSimon Farnsworth <simon.farnsworth@onelan.co.uk> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 28 4月, 2007 10 次提交
-
-
由 Damian Minkov 提交于
Fix audio input source for capturing(playing) audio on AverTv Go 007 cards. Signed-off-by: NDamian Minkov <damencho@damencho.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
The new name fits to what it is and what is on the box. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
There are 2 new entries for p7131 boards and one correction for a board with LNA. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Peter Missel 提交于
It is a Lifeview Duo with a different ID Signed-off-by: NPeter Missel <peter.missel@onlinehome.de> Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Markus Rechberger 提交于
Signed-off-by: NMarkus Rechberger <mrechberger@gmail.com> Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
This change supplies a more generic version of the tuner callback. The tuner struct now has a function pointer int (*tuner_callback) (void *dev, int command, int arg) additionally to a int config parameter. both can be set through the TUNER_SET_TYPE_ADDR client call. Note that the meaning of the parameters depend on the tuner type. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
The patch moves the tda827x dvb tuning code to a separate module Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Peter Missel 提交于
There are card variants supporting FM radio through tda8275. Signed-off-by: NPeter Missel <peter.missel@onlinehome.de> Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
This patch contains - new tuning code for the tda827xa silicon tuner. - controls the preamplifier of some boards with this tuner. - support for the Philips Tiger S hybrid DVB-T reference design. - reworked the saa7134-dvb modulue to get rid of most of the small board specific functions. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
These entries mainly are to support configurations of the tda827x silicon tuner with a preamplifier. The values can be set throgh the attach inform or through the extended TUNER_SET_TYPE_ADDR client call. The function pointer will only be updated if the parameter is not NULL. Since a typecast is necessary to set the pointer, i added a typedef for this pointer (tuner_gpio_func_t) in tuner.h Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 21 2月, 2007 2 次提交
-
-
由 Michael Krufky 提交于
Add support for Terratec Cinergy HT PCI Signed-off-by: NGiorgio Moscardi <software@sukkology.net> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Juan Pablo Sormani 提交于
Signed-off-by: NJuan Pablo Sormani <sorman@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-