Move the _if_ outside the verbatim string.

Make key ring name as a verbatim string.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Commit d3bfe841 changed the name but did
not update the documentation.

Fixes: d3bfe841Signed-off-by: NPhilipp Hahn <hahn@univention.de>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

So once upon a time I set out to fix the problem reported by Tobin wherein
a literal block within a kerneldoc comment would be corrupted in
processing.  On the way, though, I got annoyed at the way I have to learn
how kernel-doc works from the beginning every time I tear into it.

As a result, seven of the following eight patches just get rid of some dead
code and reorganize the rest - mostly turning the 500-line process_file()
function into something a bit more rational.  Sphinx output is unchanged
after these are applied.  Then, at the end, there's a tweak to stop messing
with literal blocks.

If anybody was unaware that I've not done any serious Perl since the
1990's, they will certainly understand that fact now.

Add the SPDX header while I'm in the neighborhood.  The source itself just
says "GNU General Public License", but it also refers people to the COPYING
file for further information.  Since COPYING says 2.0-only, that is what I
have put into the header.
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

This patch fixes a warning during "make xmldocs"

Documentation/driver-api/slimbus.rst:93:
WARNING: Title underline too short.
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Without this patch, the points 1-9 in the list are rendered as an HTML
blockquote containing a list, causing them to be indented further than
the rest of the list.

While at it, also fix the quotation marks around G and P.
Signed-off-by: NJonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

It helps to give some examples about how to use in-line
comments also when nested union/structs are present. So add it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

The parser at kernel-doc rejects names with dots in the middle.
Fix it, in order to support nested structs/unions.
Tested-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

We want to give some examples about how to do in-line comments
for nested structs. So, move it to be after nested structs/unions
chapter.

The section content was not changed on this patch.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Without ending with a ";", kernel-doc doesn't recognize it
as an struct, and it fails to parse the example.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

There's a missing */ at the end of Kernel docs example.
Even adding it, it will still produce 3 warnings:

	example:33: warning: Function parameter or member 'bar' not described in 'nested_foobar'
	example:33: warning: Function parameter or member 'bar.st1' not described in 'nested_foobar'
	example:33: warning: Function parameter or member 'bar.st2' not described in 'nested_foobar'

So, make the example more complete and add the missing end
of comment there.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

The mailing list archives[1,2] show no activity since September 2011.

[1]: https://lists.linuxfoundation.org/pipermail/bugme-new/
[2]: https://lists.linuxfoundation.org/pipermail/bugme-janitors/Signed-off-by: NJonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

When function description includes brackets after the function name as
suggested by Documentation/doc-guide/kernel-doc, the kernel-doc script
omits the function name from "Scanning doc for" report.
Extending match for identifier name with optional brackets fixes this
issue.
Signed-off-by: NMike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Delete reference to the kernel-mentors mailing list because the mailing list no longer exists
Signed-off-by: NMinghui Liu <minghui.liu.95@gmail.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

It can be useful to put code snippets into kerneldoc comments; that can be
done with the "::" operator at the end of a line like this::

   if (desperate)
       run_in_circles();

The ".. code-block::" directive can also be used to this end.  kernel-doc
currently fails to understand these literal blocks and applies its normal
markup to them, which is then treated as literal by sphinx.  The result is
unsightly markup instead of a useful code snippet.

Apply a hack to the output code to recognize literal blocks and avoid
performing any special markup on them.  It's ugly, but that means it fits
in well with the rest of the script.
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Move STATE_INLINE and STATE_DOCBLOCK code out of process_file(), which now
actually fits on a single screen.  Delete an unused variable and add a
couple of comments while I'm at it.
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Move the top-level prototype-processing code out of process_file().
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Also group the pseudo-global $leading_space variable with its peers.
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Move this code out of process_file() in the name of readability and
maintainability.
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Begin the process of splitting up the nearly 500-line process_file()
function by moving STATE_NORMAL processing to a separate function.
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

STATE_FIELD describes a parser state that can handle any part of a
kerneldoc comment body; rename it to STATE_BODY to reflect that.

The $in_purpose variable was a hidden substate of STATE_FIELD; get rid of
it and make a proper state (STATE_BODY_MAYBE) instead.  This will make the
subsequent process_file() splitup easier.
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

XML escaping is a worry that came with DocBook, which we no longer have any
dealings with.  So get rid of the useless xml_escape()/xml_unescape()
functions.  No change to the generated output.
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

I found the layout confusing with multiple introductions to what
kernel-doc is and how to use it.

I made the following changes:
 - Moved the 'Including kernel-doc comments' section to the end of
   the document -- we should explain what it *is* before we explain
   how to integrate it.
 - Moved the 'Recommendations' subsection to the top.  We want people
   to know what to document before telling them how to do it.
 - Rewrite the 'Writing kernel-doc comments' section, integrating
   the 'Recommendations' subsection and a paragraph from 'How to format
   kernel-doc comments'.
 - Remove the paragraph about the kernel-doc script; we're supposed to
   be teaching people how to use punctuation to write pretty documentation,
   not documenting the build tooling.
 - Split the 'Parameters and member arguments' section into 'Function
   parameters' and 'Members'.  Structure members are not commonly
   referred to as arguments.
 - Integrate the 'private:' and 'public:' tag descriptions into the
   'Members' section.
 - Move the 'In-line member documentation comments' subsection up to be
   with the 'Members' section.
Signed-off-by: NMatthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Line up the second line in the way that the example purports to be
showing.
Signed-off-by: NMatthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Instead of asking the user to copy and paste a small perl script from
the documentation, just distribute the perl script in the scripts
directory.
Signed-off-by: NMatthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

The author clearly meant to use the word 'which' here.  Also replace
some tabs with spaces which fixes the syntax highlighting in my editor.
Signed-off-by: NMatthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

This section is mentioned in scripts/kernel-doc, so we should mention it
in doc-guide/kernel-doc.rst.  There are close to 500 comments using the
Context section already, and almost 300 using a Locking section which
fulfills much the same purpose (and should probably be converted for
consistency).
Signed-off-by: NMatthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Up to now, all commit messages have used the "d" in lower case.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

There is no file named 'enabled' in the directory tracing/events. It should
be the file 'enable'.
Signed-off-by: NXiongwei Song <sxwjean@me.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

except, again, POLLFREE and POLL_BUSY_LOOP.

With this, we finally get to the promised end result:

 - POLL{IN,OUT,...} are plain integers and *not* in __poll_t, so any
   stray instances of ->poll() still using those will be caught by
   sparse.

 - eventpoll.c and select.c warning-free wrt __poll_t

 - no more kernel-side definitions of POLL... - userland ones are
   visible through the entire kernel (and used pretty much only for
   mangle/demangle)

 - same behavior as after the first series (i.e. sparc et.al. epoll(2)
   working correctly).
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:

    for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
        L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
        for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
    done

with de-mangling cleanups yet to come.

NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do.  But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.

The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull more poll annotation updates from Al Viro:
 "This is preparation to solving the problems you've mentioned in the
  original poll series.

  After this series, the kernel is ready for running

      for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
            L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
            for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
      done

  as a for bulk search-and-replace.

  After that, the kernel is ready to apply the patch to unify
  {de,}mangle_poll(), and then get rid of kernel-side POLL... uses
  entirely, and we should be all done with that stuff.

  Basically, that's what you suggested wrt KPOLL..., except that we can
  use EPOLL... instead - they already are arch-independent (and equal to
  what is currently kernel-side POLL...).

  After the preparations (in this series) switch to returning EPOLL...
  from ->poll() instances is completely mechanical and kernel-side
  POLL... can go away. The last step (killing kernel-side POLL... and
  unifying {de,}mangle_poll() has to be done after the
  search-and-replace job, since we need userland-side POLL... for
  unified {de,}mangle_poll(), thus the cherry-pick at the last step.

  After that we will have:

   - POLL{IN,OUT,...} *not* in __poll_t, so any stray instances of
     ->poll() still using those will be caught by sparse.

   - eventpoll.c and select.c warning-free wrt __poll_t

   - no more kernel-side definitions of POLL... - userland ones are
     visible through the entire kernel (and used pretty much only for
     mangle/demangle)

   - same behavior as after the first series (i.e. sparc et.al. epoll(2)
     working correctly)"

* 'work.poll2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  annotate ep_scan_ready_list()
  ep_send_events_proc(): return result via esed->res
  preparation to switching ->poll() to returning EPOLL...
  add EPOLLNVAL, annotate EPOLL... and event_poll->event
  use linux/poll.h instead of asm/poll.h
  xen: fix poll misannotation
  smc: missing poll annotations

Pull xtense fix from Max Filippov:
 "Build fix for xtensa architecture with KASAN enabled"

* tag 'xtensa-20180211' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: fix build with KASAN

Pull nios2 update from Ley Foon Tan:

 - clean up old Kconfig options from defconfig

 - remove leading 0x and 0s from bindings notation in dts files

* tag 'nios2-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  nios2: defconfig: Cleanup from old Kconfig options
  nios2: dts: Remove leading 0x and 0s from bindings notation

The commit 917538e2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT
usage") removed KASAN_SHADOW_SCALE_SHIFT definition from
include/linux/kasan.h and added it to architecture-specific headers,
except for xtensa. This broke the xtensa build with KASAN enabled.
Define KASAN_SHADOW_SCALE_SHIFT in arch/xtensa/include/asm/kasan.h

Reported by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 917538e2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT usage")
Acked-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

Remove old, dead Kconfig option INET_LRO. It is gone since
commit 7bbf3cae ("ipv4: Remove inet_lro library").
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Acked-by: NLey Foon Tan <ley.foon.tan@intel.com>

Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:

Warning (unit_address_format): Node /XXX unit name should not have leading "0x"

and

Warning (unit_address_format): Node /XXX unit name should not have leading 0s

Converted using the following command:

find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} +

For simplicity, two sed expressions were used to solve each warnings separately.

To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:

https://elinux.org/Device_Tree_Linux#Linux_conventions

This is a follow up to commit 4c9847b7 ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: NDavid Daney <ddaney@caviumnetworks.com>
Suggested-by: NRob Herring <robh@kernel.org>
Signed-off-by: NMathieu Malaterre <malat@debian.org>
Acked-by: NLey Foon Tan <ley.foon.tan@intel.com>

Pull PCI fix from Bjorn Helgaas:
 "Fix a POWER9/powernv INTx regression from the merge window (Alexey
  Kardashevskiy)"

* tag 'pci-v4.16-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  powerpc/pci: Fix broken INTx configuration via OF

Pull block fixes from Jens Axboe:
 "A few fixes to round off the merge window on the block side:

   - a set of bcache fixes by way of Michael Lyle, from the usual bcache
     suspects.

   - add a simple-to-hook-into function for bpf EIO error injection.

   - fix blk-wbt that mischarectized flushes as reads. Improve the logic
     so that flushes and writes are accounted as writes, and only reads
     as reads. From me.

   - fix requeue crash in BFQ, from Paolo"

* tag 'for-linus-20180210' of git://git.kernel.dk/linux-block:
  block, bfq: add requeue-request hook
  bcache: fix for data collapse after re-attaching an attached device
  bcache: return attach error when no cache set exist
  bcache: set writeback_rate_update_seconds in range [1, 60] seconds
  bcache: fix for allocator and register thread race
  bcache: set error_limit correctly
  bcache: properly set task state in bch_writeback_thread()
  bcache: fix high CPU occupancy during journal
  bcache: add journal statistic
  block: Add should_fail_bio() for bpf error injection
  blk-wbt: account flush requests correctly