This reverts commit 102aefdd.

Tom London reports that it causes sync() to hang on Fedora rawhide:

  https://bugzilla.redhat.com/show_bug.cgi?id=1033965

and Josh Boyer bisected it down to this commit.  Reverting the commit in
the rawhide kernel fixes the problem.

Eric Paris root-caused it to incorrect subtype matching in that commit
breaking fuse, and has a tentative patch, but by now we're better off
retrying this in 3.14 rather than playing with it any more.
Reported-by: NTom London <selinux@gmail.com>
Bisected-by: NJosh Boyer <jwboyer@fedoraproject.org>
Acked-by: NEric Paris <eparis@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Anand Avati <avati@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull EDAC fix from Borislav Petkov:
 "Silence a compiler warning in sb_edac"

* tag 'edac_fixes_for_3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  sb_edac: Shut up compiler warning when EDAC_DEBUG is enabled

Pull ARM fixes from Russell King:
 "This resolves some further issues with the dma mask changes on ARM
  which have been found by TI and others, and also some corner cases
  with the updates to the virtual to physical address translations.

  Konstantin also found some problems with the unwinder, which now
  performs tighter verification that the stack is valid while unwinding"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: fix asm/memory.h build error
  ARM: 7917/1: cacheflush: correctly limit range of memory region being flushed
  ARM: 7913/1: fix framepointer check in unwind_frame
  ARM: 7912/1: check stack pointer in get_wchan
  ARM: 7909/1: mm: Call setup_dma_zone() post early_paging_init()
  ARM: 7908/1: mm: Fix the arm_dma_limit calculation
  ARM: another fix for the DMA mapping checks

Pull ARC fixes from Vineet Gupta:
 "These are couple of weeks old already, but I just couldn't get them to
  you earlier.

   - couple of fixes for recently added perf code
   - build time extable sort"

* tag 'arc-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: [perf] Fix a few thinkos
  ARC: Add guard macro to uapi/asm/unistd.h
  ARC: extable: Enable sorting at build time

Pull device mapper fixes from Mike Snitzer:
 "A set of device-mapper fixes for 3.13.

  A fix for possible memory corruption during DM table load, fix a
  possible leak of snapshot space in case of a crash, fix a possible
  deadlock due to a shared workqueue in the delay target, fix to
  initialize read-only module parameters that are used to export metrics
  for dm stats and dm bufio.

  Quite a few stable fixes were identified for both the thin-
  provisioning and caching targets as a result of increased regression
  testing using the device-mapper-test-suite (dmts).  The most notable
  of these are the reference counting fixes for the space map btree that
  is used by the dm-array interface -- without these the dm-cache
  metadata will leak, resulting in dm-cache devices running out of
  metadata blocks.  Also, some important fixes related to the
  thin-provisioning target's transition to read-only mode on error"

* tag 'dm-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm array: fix a reference counting bug in shadow_ablock
  dm space map: disallow decrementing a reference count below zero
  dm stats: initialize read-only module parameter
  dm bufio: initialize read-only module parameters
  dm cache: actually resize cache
  dm cache: update Documentation for invalidate_cblocks's range syntax
  dm cache policy mq: fix promotions to occur as expected
  dm thin: allow pool in read-only mode to transition to read-write mode
  dm thin: re-establish read-only state when switching to fail mode
  dm thin: always fallback the pool mode if commit fails
  dm thin: switch to read-only mode if metadata space is exhausted
  dm thin: switch to read only mode if a mapping insert fails
  dm space map metadata: return on failure in sm_metadata_new_block
  dm table: fail dm_table_create on dm_round_up overflow
  dm snapshot: avoid snapshot space leak on crash
  dm delay: fix a possible deadlock due to shared workqueue

Pull HID fixes from Jiri Kosina:

 - Genius Gx Imperator Keyboard regression fix (missing break in case),
   by Ben Hutchings

 - duplicate sysfs entry error fix for hid-sensor-hub driver, by
   Srinivas Pandruvada

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: hid-sensor-hub: fix duplicate sysfs entry error
  HID: kye: Fix missing break in kye_report_fixup()

Jason Gunthorpe reports a build failure when ARM_PATCH_PHYS_VIRT is
not defined:

In file included from arch/arm/include/asm/page.h:163:0,
                 from include/linux/mm_types.h:16,
                 from include/linux/sched.h:24,
                 from arch/arm/kernel/asm-offsets.c:13:
arch/arm/include/asm/memory.h: In function '__virt_to_phys':
arch/arm/include/asm/memory.h:244:40: error: 'PHYS_OFFSET' undeclared (first use in this function)
arch/arm/include/asm/memory.h:244:40: note: each undeclared identifier is reported only once for each function it appears in
arch/arm/include/asm/memory.h: In function '__phys_to_virt':
arch/arm/include/asm/memory.h:249:13: error: 'PHYS_OFFSET' undeclared (first use in this function)

Fixes: ca5a45c0 ("ARM: mm: use phys_addr_t appropriately in p2v and v2p conversions")
Tested-By: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Pull regulator fixes from Mark Brown:
 "A small set of driver fixes plus one larger core change which changes
  the way we check to see if we're using DT so that there aren't any
  races between deciding we're using DT and the regulator subsystem
  noticing.

  This makes the new support for substituting a dummy regulator and
  optional regulators work a lot better on DT systems since it ensures
  that we don't trigger probe deferral when we shouldn't which was
  causing bugs in clients"

* tag 'regulator-v3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: pfuze100: allow misprogrammed ID
  regulator: pfuze100: Fix address of FABID
  regulator: as3722: set the correct current limit
  regulator: core: Check for DT every time we check full constraints
  regulator: core: Replace checks of have_full_constraints with a function

Pull regmap fixes from Mark Brown:
 "Two small changes to fix some error handling and checking (both of
  which would be quite serious if the errors trigger) plus a trivial
  documentation fix"

* tag 'regmap-v3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: use IS_ERR() to check clk_get() results
  regmap: make sure we unlock on failure in regmap_bulk_write
  regmap: trivial comment fix (copy'n'paste error)

Pull i2c fixes from Wolfram Sang:
 "Here are two simple but wanted fixes for the i2c subsystem"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: imx: Check the return value from clk_prepare_enable()
  i2c: mux: Inherit retry count and timeout from parent for muxed bus

Pull MTD fixes from Brian Norris:
 "Two MTD fixes, for the pxa3xx-nand driver:

   - This driver was not ready to fully Armada 370 NAND, with
     particularly notable problems seen on flash with 2KB page sizes.
     This "compatible" entry really should have been held back until
     3.14 or later.

   - Fix a bug seen in rare cases on the error path of a failed probe
     attempt, where we free unallocated DMA resources"

* tag 'for-linus-20131212' of git://git.infradead.org/linux-mtd:
  mtd: nand: pxa3xx: Use info->use_dma to release DMA resources
  Partially revert "mtd: nand: pxa3xx: Introduce 'marvell,armada370-nand' compatible string"

Pull slave-dmaengine fixes from Vinod Koul:
 "Here is the common fixes PULL for dmaengine.

  Dan has been working on fixing the build issues in bunch of drivers.
  Here we have one fixing s3c24xx-dma, along with fix from Russell on
  pl08x.  Also we have Kuninori rcar dma fixes.  The s3c24xx-dma which
  was added in last merge window missed updates to usage of DMA_COMPLETE
  so converting the last driver"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dma: fix build breakage in s3c24xx-dma
  Fix pl08x warnings
  rcar-hpbdma: initialise plane information when halted
  rcar-hpbdma: fixup channel busy check for double plane
  rcar-hpbdma: add max transfer size
  dma: mmp_pdma: add missing platform_set_drvdata() in mmp_pdma_probe()
  dmaengine: s3c24xx-dma: use DMA_COMPLETE for dma completion status

An old array block could have its reference count decremented below
zero when it is being replaced in the btree by a new array block.

The fix is to increment the old ablock's reference count just before
inserting a new ablock into the btree.
Signed-off-by: NJoe Thornber <ejt@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.9+

The old behaviour, returning -EINVAL if a ref_count of 0 would be
decremented, was removed in commit f722063e ("dm space map: optimise
sm_ll_dec and sm_ll_inc").  To fix this regression we return an error
code from the mutator function pointer passed to sm_ll_mutate() and have
dec_ref_count() return -EINVAL if the old ref_count is 0.

Add a DMERR to reflect the potential seriousness of this error.

Also, add missing dm_tm_unlock() to sm_ll_mutate()'s error path.

With this fix the following dmts regression test now passes:
 dmtest run --suite cache -n /metadata_use_kernel/

The next patch fixes the higher-level dm-array code that exposed this
regression.
Signed-off-by: NJoe Thornber <ejt@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.12+

Merge patches from Andrew Morton:
  "13 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: memcg: do not allow task about to OOM kill to bypass the limit
  mm: memcg: fix race condition between memcg teardown and swapin
  thp: move preallocated PTE page table on move_huge_pmd()
  mfd/rtc: s5m: fix register updating by adding regmap for RTC
  rtc: s5m: enable IRQ wake during suspend
  rtc: s5m: limit endless loop waiting for register update
  rtc: s5m: fix unsuccesful IRQ request during probe
  drivers/rtc/rtc-s5m.c: fix info->rtc assignment
  include/linux/kernel.h: make might_fault() a nop for !MMU
  drivers/rtc/rtc-at91rm9200.c: correct alarm over day/month wrap
  procfs: also fix proc_reg_get_unmapped_area() for !MMU case
  mm: memcg: do not declare OOM from __GFP_NOFAIL allocations
  include/linux/hugetlb.h: make isolate_huge_page() an inline

Commit 49426420 ("mm: memcg: handle non-error OOM situations more
gracefully") allowed tasks that already entered a memcg OOM condition to
bypass the memcg limit on subsequent allocation attempts hoping this
would expedite finishing the page fault and executing the kill.

David Rientjes is worried that this breaks memcg isolation guarantees
and since there is no evidence that the bypass actually speeds up fault
processing just change it so that these subsequent charge attempts fail
outright.  The notable exception being __GFP_NOFAIL charges which are
required to bypass the limit regardless.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reported-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Acked-bt: David Rientjes <rientjes@google.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is a race condition between a memcg being torn down and a swapin
triggered from a different memcg of a page that was recorded to belong
to the exiting memcg on swapout (with CONFIG_MEMCG_SWAP extension).  The
result is unreclaimable pages pointing to dead memcgs, which can lead to
anything from endless loops in later memcg teardown (the page is charged
to all hierarchical parents but is not on any LRU list) or crashes from
following the dangling memcg pointer.

Memcgs with tasks in them can not be torn down and usually charges don't
show up in memcgs without tasks.  Swapin with the CONFIG_MEMCG_SWAP
extension is the notable exception because it charges the cgroup that
was recorded as owner during swapout, which may be empty and in the
process of being torn down when a task in another memcg triggers the
swapin:

  teardown:                 swapin:

                            lookup_swap_cgroup_id()
                            rcu_read_lock()
                            mem_cgroup_lookup()
                            css_tryget()
                            rcu_read_unlock()
  disable css_tryget()
  call_rcu()
    offline_css()
      reparent_charges()
                            res_counter_charge() (hierarchical!)
                            css_put()
                              css_free()
                            pc->mem_cgroup = dead memcg
                            add page to dead lru

Add a final reparenting step into css_free() to make sure any such raced
charges are moved out of the memcg before it's finally freed.

In the longer term it would be cleaner to have the css_tryget() and the
res_counter charge under the same RCU lock section so that the charge
reparenting is deferred until the last charge whose tryget succeeded is
visible.  But this will require more invasive changes that will be
harder to evaluate and backport into stable, so better defer them to a
separate change set.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Andrey Wagin reported crash on VM_BUG_ON() in pgtable_pmd_page_dtor() with
fallowing backtrace:

  free_pgd_range+0x2bf/0x410
  free_pgtables+0xce/0x120
  unmap_region+0xe0/0x120
  do_munmap+0x249/0x360
  move_vma+0x144/0x270
  SyS_mremap+0x3b9/0x510
  system_call_fastpath+0x16/0x1b

The crash can be reproduce with this test case:

  #define _GNU_SOURCE
  #include <sys/mman.h>
  #include <stdio.h>
  #include <unistd.h>

  #define MB (1024 * 1024UL)
  #define GB (1024 * MB)

  int main(int argc, char **argv)
  {
	char *p;
	int i;

	p = mmap((void *) GB, 10 * MB, PROT_READ | PROT_WRITE,
			MAP_PRIVATE | MAP_ANONYMOUS | MAP_FIXED, -1, 0);
	for (i = 0; i < 10 * MB; i += 4096)
		p[i] = 1;
	mremap(p, 10 * MB, 10 * MB, MREMAP_FIXED | MREMAP_MAYMOVE, 2 * GB);
	return 0;
  }

Due to split PMD lock, we now store preallocated PTE tables for THP
pages per-PMD table.  It means we need to move them to other PMD table
if huge PMD moved there.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: NAndrey Vagin <avagin@openvz.org>
Tested-by: NAndrey Vagin <avagin@openvz.org>
Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Rename old regmap field of "struct sec_pmic_dev" to "regmap_pmic" and
add new regmap for RTC.

On S5M8767A registers were not properly updated and read due to usage of
the same regmap as the PMIC.  This could be observed in various hangs,
e.g.  in infinite loop during waiting for UDR field change.

On this chip family the RTC has different I2C address than PMIC so
additional regmap is needed.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NMark Brown <broonie@linaro.org>
Acked-by: NSangbeom Kim <sbkim73@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add PM suspend/resume ops to rtc-s5m driver and enable IRQ wake during
suspend so the RTC would act like a wake up source.  This allows waking
up from suspend to RAM on RTC alarm interrupt.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Cc: Mark Brown <broonie@linaro.org>
Acked-by: NSangbeom Kim <sbkim73@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After setting alarm or time the driver is waiting for UDR register to be
cleared indicating that registers data have been transferred.

Limit the endless loop to only 5 retries.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NMark Brown <broonie@linaro.org>
Acked-by: NSangbeom Kim <sbkim73@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Probe failed for rtc-s5m:

	s5m-rtc s5m-rtc: Failed to request alarm IRQ: 12: -22
	s5m-rtc: probe of s5m-rtc failed with error -22

Fix rtc-s5m interrupt request by using regmap_irq_get_virq() for mapping
the IRQ.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NMark Brown <broonie@linaro.org>
Acked-by: NSangbeom Kim <sbkim73@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix this warning:

  drivers/rtc/rtc-s5m.c: In function `s5m_rtc_probe':
  drivers/rtc/rtc-s5m.c:545: warning: assignment from incompatible pointer type

struct s5m_rtc_info.rtc has type "struct regmap *", while
struct sec_pmic_dev.rtc has type "struct i2c_client *".

Probably the author wanted to assign "struct sec_pmic_dev.regmap", which
has the correct type.

Also, as "rtc" doesn't make much sense as a name for a regmap, rename it
to "regmap".
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Sachin Kamat <sachin.kamat@linaro.org>
Tested-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The machine cannot fault if !MUU, so make might_fault() a nop for !MMU.

This fixes below build error if
!CONFIG_MMU && (CONFIG_PROVE_LOCKING=y || CONFIG_DEBUG_ATOMIC_SLEEP=y):

  arch/arm/kernel/built-in.o: In function `arch_ptrace':
  arch/arm/kernel/ptrace.c:852: undefined reference to `might_fault'
  arch/arm/kernel/built-in.o: In function `restore_sigframe':
  arch/arm/kernel/signal.c:173: undefined reference to `might_fault'
  ...
  arch/arm/kernel/built-in.o:arch/arm/kernel/signal.c:177: more undefined references to `might_fault' follow
  make: *** [vmlinux] Error 1
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update month and day of month to the alarm month/day instead of current
day/month when setting the RTC alarm mask.
Signed-off-by: NLinus Pizunski <linus@narrativeteam.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit fad1a86e ("procfs: call default get_unmapped_area on
MMU-present architectures"), as its title says, took care of only the
MMU case, leaving the !MMU side still in the regressed state (returning
-EIO in all cases where pde->proc_fops->get_unmapped_area is NULL).

From the fad1a86e changelog:

 "Commit c4fe2448 ("sparc: fix PCI device proc file mmap(2)") added
  proc_reg_get_unmapped_area in proc_reg_file_ops and
  proc_reg_file_ops_no_compat, by which now mmap always returns EIO if
  get_unmapped_area method is not defined for the target procfs file, which
  causes regression of mmap on /proc/vmcore.

  To address this issue, like get_unmapped_area(), call default
  current->mm->get_unmapped_area on MMU-present architectures if
  pde->proc_fops->get_unmapped_area, i.e.  the one in actual file operation
  in the procfs file, is not defined"
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: <stable@vger.kernel.org>	[3.12.x]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 84235de3 ("fs: buffer: move allocation failure loop into the
allocator") started recognizing __GFP_NOFAIL in memory cgroups but
forgot to disable the OOM killer.

Any task that does not fail allocation will also not enter the OOM
completion path.  So don't declare an OOM state in this case or it'll be
leaked and the task be able to bypass the limit until the next
userspace-triggered page fault cleans up the OOM state.
Reported-by: NWilliam Dauchy <wdauchy@gmail.com>
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>	[3.12.x]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With CONFIG_HUGETLBFS=n:

  mm/migrate.c: In function `do_move_page_to_node_array':
  include/linux/hugetlb.h:140:33: warning: statement with no effect [-Wunused-value]
   #define isolate_huge_page(p, l) false
                                   ^
  mm/migrate.c:1170:4: note: in expansion of macro `isolate_huge_page'
      isolate_huge_page(page, &pagelist);
Reported-by: NBorislav Petkov <bp@alien8.de>
Tested-by: NBorislav Petkov <bp@alien8.de>
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull kvm fixes from Paolo Bonzini:
 "Four security fixes for KVM on x86.  Thanks to Andrew Honig and Lars
  Bull from Google for reporting them"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: fix guest-initiated crash with x2apic (CVE-2013-6376)
  KVM: x86: Convert vapic synchronization to _cached functions (CVE-2013-6368)
  KVM: x86: Fix potential divide by 0 in lapic (CVE-2013-6367)
  KVM: Improve create VCPU parameter (CVE-2013-4587)

Pull ARM SoC fixes from Olof Johansson:
 "Another week, another batch of fixes.

  Again, OMAP regressions due to move to DT is the bulk of the changes
  here, but this should be the last of it for 3.13.  There are also a
  handful of OMAP hwmod changes (power management, reset handling) for
  USB on OMAP3 that fixes some longish-standing bugs around USB resets.

  There are a couple of other changes that also add up line count a bit:
  One is a long-standing bug with the keyboard layout on one of the PXA
  platforms.  The other is a fix for highbank that moves their
  power-off/reset button handling to be done in-kernel since relying on
  userspace to handle it was fragile and awkward"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: sun6i: dt: Fix interrupt trigger types
  ARM: sun7i: dt: Fix interrupt trigger types
  MAINTAINERS: merge IMX6 entry into IMX
  ARM: tegra: add missing break to fuse initialization code
  ARM: pxa: prevent PXA270 occasional reboot freezes
  ARM: pxa: tosa: fix keys mapping
  ARM: OMAP2+: omap_device: add fail hook for runtime_pm when bad data is detected
  ARM: OMAP2+: hwmod: Fix usage of invalid iclk / oclk when clock node is not present
  ARM: OMAP3: hwmod data: Don't prevent RESET of USB Host module
  ARM: OMAP2+: hwmod: Fix SOFTRESET logic
  ARM: OMAP4+: hwmod data: Don't prevent RESET of USB Host module
  ARM: dts: Fix booting for secure omaps
  ARM: OMAP2+: Fix the machine entry for am3517
  ARM: dts: Fix missing entries for am3517
  ARM: OMAP2+: Fix overwriting hwmod data with data from device tree
  ARM: davinci: Fix McASP mem resource names
  ARM: highbank: handle soft poweroff and reset key events
  ARM: davinci: fix number of resources passed to davinci_gpio_register()
  gpio: davinci: fix check for unbanked gpio

Pull btrfs fixes from Chris Mason:
 "This is a small collection of fixes.  It was rebased this morning, but
  I was just fixing signed-off-by tags with the wrong email"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix access_ok() check in btrfs_ioctl_send()
  Btrfs: make sure we cleanup all reloc roots if error happens
  Btrfs: skip building backref tree for uuid and quota tree when doing balance relocation
  Btrfs: fix an oops when doing balance relocation
  Btrfs: don't miss skinny extent items on delayed ref head contention
  btrfs: call mnt_drop_write after interrupted subvol deletion
  Btrfs: don't clear the default compression type

Pull nfsd reply cache bugfix from Bruce Fields:
 "One bugfix for nfsd crashes"

* 'for-3.13' of git://linux-nfs.org/~bfields/linux:
  nfsd: when reusing an existing repcache entry, unhash it first

In commit:

  commit 62e8b851
  Author: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
  Date:   Fri Oct 4 15:30:38 2013 -0300

  mtd: nand: pxa3xx: Allocate data buffer on detected flash size

the way the buffer is allocated was changed: the first READ_ID is issued
with a small kmalloc'ed buffer. Only once the flash page size is detected
the DMA buffers are allocated, and info->use_dma is set.

Currently, if the device detection fails, the driver checks the 'use_dma'
module parameter and tries to release unallocated DMA resources.

Fix this by checking the proper indicator of the DMA allocation, which
is 'info->use_dma'.
Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>

This partially reverts c0f3b864.

The "armada370-nand" compatible support is not complete, and it was mistake
to add it. Revert it and postpone the support until the infrastructure is
in place.

Cc: <stable@vger.kernel.org> # 3.12
Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: NJason Cooper <jason@lakedaemon.net>
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>

clk_prepare_enable() may fail, so let's check its return value and propagate it
in the case of error.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

A guest can cause a BUG_ON() leading to a host kernel crash.
When the guest writes to the ICR to request an IPI, while in x2apic
mode the following things happen, the destination is read from
ICR2, which is a register that the guest can control.

kvm_irq_delivery_to_apic_fast uses the high 16 bits of ICR2 as the
cluster id.  A BUG_ON is triggered, which is a protection against
accessing map->logical_map with an out-of-bounds access and manages
to avoid that anything really unsafe occurs.

The logic in the code is correct from real HW point of view. The problem
is that KVM supports only one cluster with ID 0 in clustered mode, but
the code that has the bug does not take this into account.
Reported-by: NLars Bull <larsbull@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In kvm_lapic_sync_from_vapic and kvm_lapic_sync_to_vapic there is the
potential to corrupt kernel memory if userspace provides an address that
is at the end of a page.  This patches concerts those functions to use
kvm_write_guest_cached and kvm_read_guest_cached.  It also checks the
vapic_address specified by userspace during ioctl processing and returns
an error to userspace if the address is not a valid GPA.

This is generally not guest triggerable, because the required write is
done by firmware that runs before the guest.  Also, it only affects AMD
processors and oldish Intel that do not have the FlexPriority feature
(unless you disable FlexPriority, of course; then newer processors are
also affected).

Fixes: b93463aa ('KVM: Accelerated apic support')
Reported-by: NAndrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAndrew Honig <ahonig@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Under guest controllable circumstances apic_get_tmcct will execute a
divide by zero and cause a crash.  If the guest cpuid support
tsc deadline timers and performs the following sequence of requests
the host will crash.
- Set the mode to periodic
- Set the TMICT to 0
- Set the mode bits to 11 (neither periodic, nor one shot, nor tsc deadline)
- Set the TMICT to non-zero.
Then the lapic_timer.period will be 0, but the TMICT will not be.  If the
guest then reads from the TMCCT then the host will perform a divide by 0.

This patch ensures that if the lapic_timer.period is 0, then the division
does not occur.
Reported-by: NAndrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAndrew Honig <ahonig@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In multiple functions the vcpu_id is used as an offset into a bitfield.  Ag
malicious user could specify a vcpu_id greater than 255 in order to set or
clear bits in kernel memory.  This could be used to elevate priveges in the
kernel.  This patch verifies that the vcpu_id provided is less than 255.
The api documentation already specifies that the vcpu_id must be less than
max_vcpus, but this is currently not checked.
Reported-by: NAndrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAndrew Honig <ahonig@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>