Added the suspend/resume support to ctxfi driver.

The team tested on the following seems ok:
  AMD Athlon 64 3500+ / ASUS A8N-E / 512MB DDR ATI / Radeon X1300
  20k1 & 20k2 cards
Signed-off-by: NWai Yew CHAY <wychay@ctl.creative.com>
Singed-off-by: NRyan RICHARDS <ryan_richards@creativelabs.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Allow unknown PCI SSIDs for emu20k1 and emu20k2 as "unknown" model.
Also, add a black-list check in case any device has to be listed
as "unsupported".  It has a negative value in the pci quirk entry.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The PCM x-fi native update routine can cause deadlocks when the
trigger(START) is called while the stream is running.

This patch fixes the deadlock by just postponing the pcm period update
to the next possible wake-up.  Also it adds the flip of ti->running
flag (just to be sure as now).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The spinlock in atc can cause a sleep in lock:

Kernel failure message 1:
BUG: sleeping function called from invalid context at mm/slub.c:1599
in_atomic(): 0, irqs_disabled(): 1, pid: 2537, name: gstreamer-prope
Pid: 2537, comm: gstreamer-prope Tainted: P
2.6.29.4-167.fc11.x86_64 #1
Call Trace:
  [<ffffffff8103ff0f>] __might_sleep+0x10b/0x110
  [<ffffffff810cd734>] __kmalloc+0x73/0x130
  [<ffffffffa0b4b142>] ? daio_rsc_init+0xaa/0x125 [snd_ctxfi]
  [<ffffffffa0b4b212>] dao_rsc_init+0x55/0x1c0 [snd_ctxfi]
  [<ffffffffa0b4b3d2>] dao_rsc_reinit+0x55/0x5d [snd_ctxfi]
  [<ffffffff813abd6c>] ? _spin_lock_irqsave+0x32/0x3b
  [<ffffffffa0b454fe>] atc_spdif_out_passthru+0x92/0x136 [snd_ctxfi]
  ...

Since the lock path is no critical path, it can be gracefully
replaced with a mutex.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Currently the PCM resources are allocated only once and ever in prepare
callback, assuming that the PCM parameters are never changed.  But it's
not true.

This patch adds the call of atc->pcm_release_resources() at hw_params
and hw_free callbacks to assure that the PCM setup is done correctly
for each h/w parameter changes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The SRC instances may not exist when PCM pointer callback is called at
the state before initialization is finished.  Add the NULL check just
to be sure.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added use_system_timer module option to force to use the system timer
instead of emu20k1 timer irq for debugging.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

CTUAA should be checked instead of CTHENDRIX.  The latter is for 20k2 chip.
Also, fixed the detection of UAA/HENDRIX models by fixing the mask bits.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Clean up probe routines and model detection routines so that the driver
won't call and check the PCI subsystem id at each time.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

- Clean up Hungarian coding style
- Don't use static variables for I2C information; this unables to use
  multiple instances.  Now they are stored in struct hw20k2 fields.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix possible buffer pointer overruns.  Back to zero when it's equal
or over the buffer size.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remove useless variable initializations and cast at the beginning of
functions.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Allow 64bit DMA mask for emu20k2 chip, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Change the volume control to dB scale (as the raw data seems so).
Also added the TLV dB-scale information.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Optimize the timer update routine to look up wall clock once instead of
checking the position of each stream at each timer update.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Mixer control elements are usually assigned to device 0.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

- Use static tables instead of assigining each funciton pointer
- Add __devinit* to appropriate places; pcm, mixer and timer cannot be
  marked because they are kept in the function table that lives long
- Move create_alsa_devs function out of struct ct_atc to mark it
  __devinit
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Set 2 to minimal periods of playback pcm setups, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

emu20k1 has a native timer interrupt based on the audio clock, which
is more accurate than the system timer (from the synchronization POV).
This patch adds the code to handle this with multiple streams.

The system timer is still used on emu20k2, and can be used also for
emu20k1 easily by changing USE_SYSTEM_TIMER to 1 in cttimer.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remove unneeded substitution to 32bit int to make it really working.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The UAA-mode check in hwct20k1.c is implemented with the endian-dependent
codes.  Fix to be more portable (and readable).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

emu20kx chips support 64bit address PTE.  Allow the DMA bit mask to
accept 64bit address, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use SG-buffers instead of contiguous pages.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remove the limitation of PAGE_SIZE to be 4k by defining the own
page size and macros for 4k.  8kb page size could be natively supported,
but it's disabled right now for simplicity.

Also, clean up using upper_32_bits() macro.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The device seems supporting only U8, S16, S24_3LE, S32.  Other linear
formats result in bad outputs.

Also, added the support for 32bit float format, which wasn't listed
in the original code.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

PCM names for surround streams should be also fixed as well as the mixer
element names.  Also, a bit clean up for PCM name setup.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We usually pick up "Surround" mixer for the rear output, and "Side"
for the extra surround.  Fix the channel mapping to follow it.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The prepare callback can be called multiple times, thus it needs to
release and acquire the resource again by itself at the second or later
call.

Simply add pcm_release_resources() at the beginning of each prepare
callback in ctatc.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A space has to be put between GPL and v2.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Replace a spinlock with a mutex protecting the vm block list at
mmap / munmap calls, which caused Oops like below:

BUG: sleeping function called from invalid context at mm/slub.c:1599
in_atomic(): 0, irqs_disabled(): 1, pid: 32065, name: xine
Pid: 32065, comm: xine Tainted: P           2.6.29.4-75.fc10.x86_64 #1
Call Trace:
  [<ffffffff81040685>] __might_sleep+0x105/0x10a
  [<ffffffff810c9fae>] kmem_cache_alloc+0x32/0xe2
  [<ffffffffa08e3110>] ct_vm_map+0xfa/0x19e [snd_ctxfi]
  [<ffffffffa08e1a07>] ct_map_audio_buffer+0x4c/0x76 [snd_ctxfi]
  [<ffffffffa08e2aa5>] atc_pcm_playback_prepare+0x1d7/0x2a8 [snd_ctxfi]
  [<ffffffff8105ef3f>] ? up_read+0x9/0xb
  [<ffffffff81186b61>] ? __up_read+0x7c/0x87
  [<ffffffffa08e36a6>] ct_pcm_playback_prepare+0x39/0x60 [snd_ctxfi]
  [<ffffffffa0886bcb>] snd_pcm_do_prepare+0x16/0x28 [snd_pcm]
  [<ffffffffa08867c7>] snd_pcm_action_single+0x2d/0x5b [snd_pcm]
  [<ffffffffa08881f3>] snd_pcm_action_nonatomic+0x52/0x6a [snd_pcm]
  [<ffffffffa088a723>] snd_pcm_common_ioctl1+0x404/0xc79 [snd_pcm]
  [<ffffffff810c52c8>] ? alloc_pages_current+0xb9/0xc2
  [<ffffffff810c9402>] ? new_slab+0x1a5/0x1cb
  [<ffffffff810ab9ea>] ? vma_prio_tree_insert+0x23/0xc1
  [<ffffffffa088b411>] snd_pcm_playback_ioctl1+0x213/0x230 [snd_pcm]
  [<ffffffff810b6c20>] ? mmap_region+0x397/0x4c9
  [<ffffffffa088bd9b>] snd_pcm_playback_ioctl+0x2e/0x36 [snd_pcm]
  [<ffffffff810ddc64>] vfs_ioctl+0x2a/0x78
  [<ffffffff810de130>] do_vfs_ioctl+0x462/0x4a2
  [<ffffffff81029cef>] ? default_spin_lock_flags+0x9/0xe
  [<ffffffff81374647>] ? trace_hardirqs_off_thunk+0x3a/0x6c
  [<ffffffff810de1c5>] sys_ioctl+0x55/0x77
  [<ffffffff8101133a>] system_call_fastpath+0x16/0x1b
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added missing module_param*() and MODULE_PARM*().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The ctxfi driver requires explicitly the 4k page size, and gives a
build error on architectures with non-4k pages.
As a workaround, just add the kconfig dependency on X86, which is
the only architecture ever tested.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added ctxfi: prefix to each debug print.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use struct pci subsystem_device and revision fields instead of
unneeded calls of pci_read_config_*().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The Sound Blaster X-Fi driver supports Creative solutions based on
20K1 and 20K2 chipsets.

Supported hardware :

Creative Sound Blaster X-Fi Titanium Fatal1ty® Champion Series
Creative Sound Blaster X-Fi Titanium Fatal1ty Professional Series
Creative Sound Blaster X-Fi Titanium Professional Audio
Creative Sound Blaster X-Fi Titanium
Creative Sound Blaster X-Fi Elite Pro
Creative Sound Blaster X-Fi Platinum
Creative Sound Blaster X-Fi Fatal1ty
Creative Sound Blaster X-Fi XtremeGamer
Creative Sound Blaster X-Fi XtremeMusic

Current release features:

* ALSA PCM Playback
* ALSA Record
* ALSA Mixer

Note:

* External I/O modules detection not included.
Signed-off-by: NWai Yew CHAY <wychay@ctl.creative.com>
Singed-off-by: NRyan RICHARDS <ryan_richards@creativelabs.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>