- 07 9月, 2016 1 次提交
-
-
由 Martin Blumenstingl 提交于
sd_emmc_a is used a controller for the SDIO modules. This adds the pin configuration for the SDIO controller. Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 06 9月, 2016 3 次提交
-
-
由 Daniel Glöckner 提交于
It contains pin 50 instead of pin 40. Signed-off-by: NDaniel Glöckner <dg@emlix.com> Reviewed-by: NSören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Linus Walleij 提交于
Merge tag 'sh-pfc-for-v4.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Add support for R-Car M3-W Add initial support for the Pin Function Controller on the Renesas R-Car M3-W SoC: - Basic definitions, - SCIF (serial) pins, groups and functions, - SDHI pins, groups and functions.
-
由 Vladimir Zapolskiy 提交于
cat /sys/kernel/debug/pinctrl/${pinctrl}/pinconf-groups output is hardly readable, if a pin group contains more than one pin the output is glued and looks like this: MX6Q_PAD_SD1_DAT0: 0x17071MX6Q_PAD_SD1_CMD: 0x17071MX6Q_PAD_SD1_CLK: 0x17071 Add two space indentation and a new line separator to improve readability of the output. Signed-off-by: NVladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Acked-by: NShawn Guo <shawnguo@kernel.org> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 27 8月, 2016 6 次提交
-
-
由 Paul Gortmaker 提交于
The Makefile currently controlling compilation of this code is: drivers/pinctrl/sirf/pinctrl-sirf.o --> drivers/pinctrl/sirf/Makefile:obj-y += pinctrl-sirf.o ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Rongjun Ying <rongjun.ying@csr.com> Cc: Yuping Luo <yuping.luo@csr.com> Cc: Barry Song <baohua@kernel.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Paul Gortmaker 提交于
The Makefile currently controlling compilation of this code is: drivers/pinctrl/sirf/pinctrl-atlas7.o ---> drivers/pinctrl/sirf/Makefile:obj-y += pinctrl-atlas7.o ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Barry Song <baohua@kernel.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Paul Gortmaker 提交于
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/Kconfig:config PINCTRL_ROCKCHIP drivers/pinctrl/Kconfig: bool ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. Note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-gpio@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Paul Gortmaker 提交于
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/nomadik/Kconfig:config PINCTRL_NOMADIK drivers/pinctrl/nomadik/Kconfig: bool "Nomadik pin controller driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alessandro Rubini <rubini@unipv.it> Cc: linux-gpio@vger.kernel.org Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Paul Gortmaker 提交于
The Kconfig currently controlling compilation of this code is: config PINCTRL_ABX500 bool "ST-Ericsson ABx500 family Mixed Signal Circuit gpio functions" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. Note that MODULE_ALIAS is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alessandro Rubini <rubini@unipv.it> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Paul Gortmaker 提交于
The Makefile currently controlling compilation of this code is: drivers/pinctrl/mediatek/pinctrl-mtk-common.o ---> drivers/pinctrl/mediatek/Makefile:obj-y += pinctrl-mtk-common.o ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. We don't replace module.h with init.h since the file doesn't need that. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Hongzhou Yang <hongzhou.yang@mediatek.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 24 8月, 2016 1 次提交
-
-
由 Neil Armstrong 提交于
Add support for PWM pins, for EE and AO domains. Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 22 8月, 2016 5 次提交
-
-
由 Linus Walleij 提交于
Merge tag 'sh-pfc-for-v4.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v4.9 - Bias and DU support for R-Car H3, - Basic R-Car V2H support, - Cleanups and fixes.
-
由 Martin Blumenstingl 提交于
This adds the IR remote receiver to the AO domain devices. Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: NKevin Hilman <khilman@baylibre.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 LABBE Corentin 提交于
of_match_device could return NULL, and so cause a NULL pointer dereference later at line 1009: pinctrl_data = match->data; For fixing this problem, we use of_device_get_match_data(), this will simplify the code a little by using a standard function for getting the match data. Reported-by: coverity (CID 1324136) Signed-off-by: NLABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 perr perr 提交于
Because chained_irq_enter() has already called chip->irq_mask() and chip->irq_ack(), also chained_irq_exit() will call chip->irq_unmask(), so it's not necessary to call chip->irq_*() here. Signed-off-by: NPerr Zhang <strongbox8@zoho.com> Acked-by: NTomasz Figa <tomasz.figa@gmail.com> Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> [Hand-edited from whitespace damaged patch] Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Beniamino Galvani 提交于
The driver originally supported more domains (register ranges) per pinctrl device, but since commit 9dab1868 ("pinctrl: amlogic: Make driver independent from two-domain configuration") each device gets assigned a single domain and we instantiate multiple pinctrl devices in the DT. Therefore, now the 'meson_domain' and 'meson_domain_data' structures don't have any reason to exist and can be removed to make the model simpler to understand. This commit doesn't change behavior. Tested on a Odroid-C2. Signed-off-by: NBeniamino Galvani <b.galvani@gmail.com> Acked-by: NKevin Hilman <khilman@baylibre.com> Tested-by: NKevin Hilman <khilman@baylibre.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 19 8月, 2016 3 次提交
-
-
由 Takeshi Kihara 提交于
This patch adds SDHI pins, groups and functions to R8A7796 SoC. Signed-off-by: NTakeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
由 Takeshi Kihara 提交于
This patch adds SCIF{0,1,2,3,4,5} pins, groups and functions to R8A7796 SoC. Signed-off-by: NTakeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
由 Takeshi Kihara 提交于
This patch adds initial pinctrl driver to support for the R8A7796 SoC. Signed-off-by: NTakeshi Kihara <takeshi.kihara.df@renesas.com> [uli: rebased on top of renesas-drivers] Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
- 16 8月, 2016 1 次提交
-
-
由 Laurent Pinchart 提交于
Only the DU parallel RGB output signals are included, HDMI and TCON pins will be added in separate groups. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
- 11 8月, 2016 4 次提交
-
-
由 Patrice Chotard 提交于
This patch allows to use the second parameter of gpio specifier, which is used to specify whether the gpio is active high or low. Simply remove specific of_xlate callback() and of_gpio_n_cells and use default one set by of_gpiochip_add() which allows to use second parameter gpio specifier. Signed-off-by: NMaxime Coquelin <maxime.coquelin@st.com> Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Julia Lawall 提交于
Use of_property_read_bool to check for the existence of a property. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e1,e2,x; @@ - if (of_get_property(e1,e2,NULL)) - x = true; - else - x = false; + x = of_property_read_bool(e1,e2); // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Stephen Boyd 提交于
The drivers don't really need to know which PMIC they're for, so make a generic binding for them. This alleviates us from updating the drivers every time a new PMIC comes out. It's still recommended that we update the binding with new PMIC models and always specify the specific model for the MPPs and gpios before the generic compatible string in devicetree, but this at least cuts down on adding more and more compatible strings to the drivers until we actually need them. Cc: <devicetree@vger.kernel.org> Acked-by: N"Ivan T. Ivanov" <iivanov.xz@gmail.com> Reviewed-by: NBjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Marcus Cooper 提交于
Add the SPDIF mux functionality to the pinctrl for the Allwinner A31 SoC. Signed-off-by: NMarcus Cooper <codekipper@gmail.com> Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 08 8月, 2016 16 次提交
-
-
由 Sergei Shtylyov 提交于
Add DU pin groups to the R8A7792 PFC driver. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
由 Sergei Shtylyov 提交于
Add VIN[0-5] pin groups to the R8A7792 PFC driver. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> [geert: Fix VI1_D14_G6_Y6 and VI1_D15_G7_Y7 pins] Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
由 Geert Uytterhoeven 提交于
This source file handles r8a7795 only, which is not the sole member of the R-Car Gen3 family. Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Sergei Shtylyov 提交于
Add CAN0/1 data/clock pin groups to R8A7792 PFC driver. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
由 Sergei Shtylyov 提交于
Add SDHI0 pin groups to the R8A7792 PFC driver. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
由 Sergei Shtylyov 提交于
Add the EtherAVB pin groups to the R8A7792 PFC driver. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
由 Sergei Shtylyov 提交于
Add the PFC support for the R8A7792 SoC including pin groups for some on-chip devices such as SCIF, INTC, and LBSC... Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> [geert: s/LSBC/LBSC/] Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
由 Sergei Shtylyov 提交于
The PORT_GP_CFG_<n>() macros take up more than 80 columns -- and not for a good reason. Make the header file checkpatch.pl-proof at least in this respect... Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
由 Ulrich Hecht 提交于
Implements pull-up and pull-down. On this SoC there is no simple mapping of GP pins to bias register bits, so we need a table. Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
由 Linus Torvalds 提交于
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull more block fixes from Jens Axboe: "As mentioned in the pull the other day, a few more fixes for this round, all related to the bio op changes in this series. Two fixes, and then a cleanup, renaming bio->bi_rw to bio->bi_opf. I wanted to do that change right after or right before -rc1, so that risk of conflict was reduced. I just rebased the series on top of current master, and no new ->bi_rw usage has snuck in" * 'for-linus' of git://git.kernel.dk/linux-block: block: rename bio bi_rw to bi_opf target: iblock_execute_sync_cache() should use bio_set_op_attrs() mm: make __swap_writepage() use bio_set_op_attrs() block/mm: make bdev_ops->rw_page() take a bool for read/write
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm zpos property support from Dave Airlie: "This tree was waiting on some media stuff I hadn't had time to get a stable branchpoint off, so I just waited until it was all in your tree first. It's been around a bit on the list and shouldn't affect anything outside adding the generic API and moving some ARM drivers to using it" * tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linux: drm: rcar: use generic code for managing zpos plane property drm/exynos: use generic code for managing zpos plane property drm: sti: use generic zpos for plane drm: add generic zpos property
-
由 Jens Axboe 提交于
Since commit 63a4cc24, bio->bi_rw contains flags in the lower portion and the op code in the higher portions. This means that old code that relies on manually setting bi_rw is most likely going to be broken. Instead of letting that brokeness linger, rename the member, to force old and out-of-tree code to break at compile time instead of at runtime. No intended functional changes in this commit. Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Jens Axboe 提交于
The original commit missed this function, it needs to mark it a write flush. Cc: Mike Christie <mchristi@redhat.com> Fixes: e742fc32 ("target: use bio op accessors") Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Jens Axboe 提交于
Cleaner than manipulating bio->bi_rw flags directly. Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Jens Axboe 提交于
Commit abf54548 changed it from an 'rw' flags type to the newer ops based interface, but now we're effectively leaking some bdev internals to the rest of the kernel. Since we only care about whether it's a read or a write at that level, just pass in a bool 'is_write' parameter instead. Then we can also move op_is_write() and friends back under CONFIG_BLOCK protection. Reviewed-by: NMike Christie <mchristi@redhat.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-