I'm no longer with Imagination Technologies. I am still interested in
maintaining or reviewing DTS patches for Ci40 if any. Update email-id
to an active one.
Signed-off-by: NRahul Bedarkar <rahulbedarkar89@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15990/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Separate out kernfs from driver core and add myself as a
co-maintainer.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Andrew has been contributing a lot to PHYLIB over the past months and
his feedback on patches is more than welcome.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Acked-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add Julian Wiedmann as additional maintainer for drivers/s390/net
and net/iucv.
Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

update enic maintainers
Signed-off-by: NGovindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Initial target for this driver is the Intel Apollo Lake platform and
Denverton micro-server, they use the same internal memory controller IP
called Pondicherry2.

Memory controller registers are not in PCI config space like earlier
Intel memory controllers. For Apollo Lake platform they are accessed via
a "side-band" interface, for Denverton micro-server they are access via
PCI config space and memory map I/O. This driver is for Apollo Lake and
Denverton, but only the Denverton is fully enabled while we wait for the
sideband driver.

Apollo lake driver and initial cut at Denverton driver by Tony Luck.
Extensive cleanup, refactoring and basic verification by Qiuxu Zhuo.
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NQiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170308174539.14432-1-qiuxu.zhuo@intel.comSigned-off-by: NBorislav Petkov <bp@suse.de>

Ganapathi & Xinming are starting to take a more active role in the
mwifiex driver maintainership here onwards on account of organizational
changes.

CC: Xinming Hu <huxm@marvell.com>
CC: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com>
Signed-off-by: NNishant Sarmukadam <nishants@marvell.com>
Signed-off-by: NCathy Luo <cluo@marvell.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

macvlan.c file seems to be both in VLAN and MACVLAN DRIVER, so remove
the MACVLAN DRIVER since this is redundant.

I propose with this patch to remove the VLAN (802.1Q) entry so this just
falls into the NETWORKING [GENERAL].
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It has been difficult lately for Michal to work on Kbuild on his
regular basis.  We discussed the maintainership of Kbuild, and I
decided to be a co-maintainer.

Add myself to the maintainer field, and replace the repository with
my own.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NMichal Marek <mmarek@suse.com>

The platform_data header file was dropped in the merged version of the
USB251xB driver. Therefore remove its reference from the MAINTAINERS file.
Signed-off-by: NRichard Leitner <richard.leitner@skidata.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The email address of Jan Dumon bounces, and there is not relevant information
in the linked website.
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Due to personal reasons I'm unable to continue as fbtft maintainer.
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Often all is needed is these small helpers, instead of compiler.h or a
full kprobes.h.  This is important for asm helpers, in fact even some
asm/kprobes.h make use of these helpers...  instead just keep a generic
asm file with helpers useful for asm code with the least amount of
clutter as possible.

Likewise we need now to also address what to do about this file for both
when architectures have CONFIG_HAVE_KPROBES, and when they do not.  Then
for when architectures have CONFIG_HAVE_KPROBES but have disabled
CONFIG_KPROBES.

Right now most asm/kprobes.h do not have guards against CONFIG_KPROBES,
this means most architecture code cannot include asm/kprobes.h safely.
Correct this and add guards for architectures missing them.
Additionally provide architectures that not have kprobes support with
the default asm-generic solution.  This lets us force asm/kprobes.h on
the header include/linux/kprobes.h always, but most importantly we can
now safely include just asm/kprobes.h on architecture code without
bringing the full kitchen sink of header files.

Two architectures already provided a guard against CONFIG_KPROBES on its
kprobes.h: sh, arch.  The rest of the architectures needed gaurds added.
We avoid including any not-needed headers on asm/kprobes.h unless
kprobes have been enabled.

In a subsequent atomic change we can try now to remove compiler.h from
include/linux/kprobes.h.

During this sweep I've also identified a few architectures defining a
common macro needed for both kprobes and ftrace, that of the definition
of the breakput instruction up.  Some refer to this as
BREAKPOINT_INSTRUCTION.  This must be kept outside of the #ifdef
CONFIG_KPROBES guard.

[mcgrof@kernel.org: fix arm64 build]
  Link: http://lkml.kernel.org/r/CAB=NE6X1WMByuARS4mZ1g9+W=LuVBnMDnh_5zyN0CLADaVh=Jw@mail.gmail.com
[sfr@canb.auug.org.au: fixup for kprobes declarations moving]
  Link: http://lkml.kernel.org/r/20170214165933.13ebd4f4@canb.auug.org.au
Link: http://lkml.kernel.org/r/20170203233139.32682-1-mcgrof@kernel.orgSigned-off-by: NLuis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NMasami Hiramatsu <mhiramat@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The openrisc official repository and patch work happens currently on
github. Add the repo for reference.
Signed-off-by: NStafford Horne <shorne@gmail.com>

Add the new include/trace/events/fs_dax.h tracepoint header, the existing
include/linux/dax.h header, update Matthew's email address and add myself
as a maintainer for filesystem DAX.

Link: http://lkml.kernel.org/r/1484085142-2297-4-git-send-email-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: NMatthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The QLogic FastLinQ Driver for FCoE (qedf) is the FCoE specific module
for 41000 Series Converged Network Adapters by QLogic. This patch
consists of following changes:

- MAINTAINERS Makefile and Kconfig changes for qedf
- PCI driver registration
- libfc/fcoe host level initialization
- SCSI host template initialization and callbacks
- Debugfs and log level infrastructure
- Link handling
- Firmware interface structures
- QED core module initialization
- Light L2 interface callbacks
- I/O request initialization
- Firmware I/O completion handling
- Firmware ELS request/response handling
- FIP request/response handled by the driver itself
Signed-off-by: NNilesh Javali <nilesh.javali@cavium.com>
Signed-off-by: NManish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: NSaurav Kashyap <saurav.kashyap@cavium.com>
Signed-off-by: NArun Easi <arun.easi@cavium.com>
Signed-off-by: NChad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Group all the PCI drivers that use DesignWare core in dwc directory.
dwc IP is capable of operating in both host mode and device mode and
keeping it inside the *host* directory is misleading.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NJingoo Han <jingoohan1@gmail.com>
Acked-By: NJoao Pinto <jpinto@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Minghuan Lian <minghuan.Lian@freescale.com>
Cc: Mingkai Hu <mingkai.hu@freescale.com>
Cc: Roy Zang <tie-fei.zang@freescale.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Pratyush Anand <pratyush.anand@gmail.com>
Cc: Niklas Cassel <niklas.cassel@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Cc: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Cc: Stanimir Varbanov <svarbanov@mm-sol.com>

Add git tree url for modules.
Signed-off-by: NJessica Yu <jeyu@redhat.com>

Add driver to support the Multi-Inno MI0283QT display panel.
It has an ILI9341 MIPI DBI compatible display controller.
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NThierry Reding <treding@nvidia.com>

Add maintainer information for bmips-cpufreq.c.
Signed-off-by: NMarkus Mayer <mmayer@broadcom.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The block guys have merged a new driver called "sed-opal", which is
getting caught by our pattern match on "opal".

So drop our "opal" pattern and replace it with matches against the
specific paths for our drivers. We should try and remember to add new
drivers as they're added in future.
Suggested-by: NJon Derrick <jonathan.derrick@intel.com>
Signed-off-by: NStewart Smith <stewart@linux.vnet.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
[mpe: Fix ic2/i2c typo, write change log]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Signed-off-by: NScott Bauer <scott.bauer@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

This patch adds a driver for configuration of the Microchip USB251xB/xBi
USB 2.0 hub controller series with USB 2.0 upstream connectivity, SMBus
configuration interface and two to four USB 2.0 downstream ports.

Furthermore add myself as a maintainer for this driver.

The datasheet can be found at the manufacturers website, see [1]. All
device-tree exposed configuration features have been tested on a i.MX6
platform with a USB2512B hub.

[1] http://ww1.microchip.com/downloads/en/DeviceDoc/00001692C.pdfSigned-off-by: NRichard Leitner <richard.leitner@skidata.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Makefile and Kconfig changes for enabling bnxt_re compilation
Signed-off-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NSomnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: NSriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

On ACPI based tablets, the ACPI touchscreen node only contains info on
the gpio and the irq, and is missing any info on the axis. This info is
expected to be built into the tablet model specific version of the driver
shipped with the os-image for the device.

Add support for getting the missing info from a table built into the
driver, using dmi data to identify which entry of the table to use and
add info for the CUBE iwork8 Air and Jumper EZpad mini3 tablets on which
this code was tested / developed.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=187531Signed-off-by: NHans de Goede <hdegoede@redhat.com>
[dmitry.torokhov@gmail.com: Move to platform/x86]
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
[andy: fixed merge conflict]
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>

My opensource.altera.com email will be going away soon. Switch to new
email address (linux.intel.com).
Signed-off-by: NThor Thayer <thor.thayer@linux.intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1487014241-3771-1-git-send-email-thor.thayer@linux.intel.comSigned-off-by: NBorislav Petkov <bp@suse.de>

The tree used for staging pstore changes has moved to my repo. The -next
tree already pulls from here, so update MAINTAINERS to reflect reality.
While at it, add some more pstore-related files to track.
Signed-off-by: NKees Cook <keescook@chromium.org>

The ghostprotocols.net domain is not working, remove it from CREDITS and
MAINTAINERS, and change the status to "Odd fixes", and since I haven't
been maintaining those, remove my address from there.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are currently no external users of the public dw_mmc header file,
except the dw_mmc driver itself. Therefore let's move the definitions from
the public dw_mmc header file into the existing private dw_mmc header file
and then remove the public one.
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>

Acked-by: NPeter Griffin <peter.griffin@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

It's been a while since Patrick has been suspended as coreteam member [1].
Update this file to remove him.

While at this, remove references to all foo-tables variants, given the
project hosts more than just that, eg. ipset, conntrack, ...

[1] https://marc.info/?l=netfilter-devel&m=146887464512702Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Add the CPT options in crypto Kconfig and update the
crypto Makefile

Update the MAINTAINERS file too.
Signed-off-by: NGeorge Cherian <george.cherian@cavium.com>
Reviewed-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch updates the LM90's devicetree definition to
include the #thermal-sensor-cells property as well as
the sensor constants in include/dt-bindings/thermal/lm90.h.

Cc: Wei Ni <wni@nvidia.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NChristian Lamparter <chunkeey@googlemail.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Add maintainers for this tunnel driver. Include main osmocom.org mailist
list too.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add Laurentiu Tudor as a second maintainer and update Stuart Yoder's
email address.
Signed-off-by: NStuart Yoder <stuart.yoder@nxp.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add maintainer information for Cavium ThunderX2 ARM64 processor
family.
Signed-off-by: NJayachandran C <jnair@caviumnetworks.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Update MAINTAINERS file with cpufreq's selftest directory.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

- Add Daniel Thompson as Maintainer.
- Add new files
- Shift Jingoo down the list due to a lack of time.
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Add entry for the STMicroelectronics DELTA driver.
Acked-by: NPeter Griffin <peter.griffin@linaro.org>
Signed-off-by: NHugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

I and Sergey would like to volunteer as printk code maintainers.
It is a code that everyone is using, various people fix bugs or
even add features but there is nobody really interested into
maintaining it.

I and Sergey have put a lot of effort into understanding the code
and related problems. We are working on solutions for some long
term problems. There is a nice summary from the Kernel Summit
presentation, see https://lwn.net/Articles/705938/

We have already started to use the gained knowledge and comment
on other printk-related patches. The official role should help
us to do it more effectively.

Our priorities are:

    + prevent deadlocks (printk_safe patchset, console locks)
    + prevent softlocks (async printk, console_sem and flushing)
    + handle other bugs/fixes/features as they come

with this in mind:

    + printk is used in different context
    + need special care in some modes, e.g. oops, panic, suspend
    + do best effort to store/show messages
    + the code is already pretty complicated and twisted;
      support clean ups; always think hard if a feature/fix
      is worth any complication

Of course, it still will be much appreciated if other people review
printk patches.

Regarding the workflow. It will be highly appreciated if the patches
might still go via Andrew's -mm tree at least for 4.10. In the long
term, we would like to make Andrew's life easier and handle printk
patches in an own git tree. But we first need to set it up and get
familiar with the processes.

Link: http://lkml.kernel.org/r/1481798878-31898-1-git-send-email-pmladek@suse.com
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NPetr Mladek <pmladek@suse.com>
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>