- 24 3月, 2019 40 次提交
-
-
由 Jianchao Wang 提交于
[ Upstream commit aef1897cd36dcf5e296f1d2bae7e0d268561b685 ] When requeue, if RQF_DONTPREP, rq has contained some driver specific data, so insert it to hctx dispatch list to avoid any merge. Take scsi as example, here is the trace event log (no io scheduler, because RQF_STARTED would prevent merging), kworker/0:1H-339 [000] ...1 2037.209289: block_rq_insert: 8,0 R 4096 () 32768 + 8 [kworker/0:1H] scsi_inert_test-1987 [000] .... 2037.220465: block_bio_queue: 8,0 R 32776 + 8 [scsi_inert_test] scsi_inert_test-1987 [000] ...2 2037.220466: block_bio_backmerge: 8,0 R 32776 + 8 [scsi_inert_test] kworker/0:1H-339 [000] .... 2047.220913: block_rq_issue: 8,0 R 8192 () 32768 + 16 [kworker/0:1H] scsi_inert_test-1996 [000] ..s1 2047.221007: block_rq_complete: 8,0 R () 32768 + 8 [0] scsi_inert_test-1996 [000] .Ns1 2047.221045: block_rq_requeue: 8,0 R () 32776 + 8 [0] kworker/0:1H-339 [000] ...1 2047.221054: block_rq_insert: 8,0 R 4096 () 32776 + 8 [kworker/0:1H] kworker/0:1H-339 [000] ...1 2047.221056: block_rq_issue: 8,0 R 4096 () 32776 + 8 [kworker/0:1H] scsi_inert_test-1986 [000] ..s1 2047.221119: block_rq_complete: 8,0 R () 32776 + 8 [0] (32768 + 8) was requeued by scsi_queue_insert and had RQF_DONTPREP. Then it was merged with (32776 + 8) and issued. Due to RQF_DONTPREP, the sdb only contained the part of (32768 + 8), then only that part was completed. The lucky thing was that scsi_io_completion detected it and requeued the remaining part. So we didn't get corrupted data. However, the requeue of (32776 + 8) is not expected. Suggested-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NJianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Francesco Ruggeri 提交于
[ Upstream commit 8d29d16d21342a0c86405d46de0c4ac5daf1760f ] If a non zero value happens to be in xt[NFPROTO_BRIDGE].cur at init time, the following panic can be caused by running % ebtables -t broute -F BROUTING from a 32-bit user level on a 64-bit kernel. This patch replaces kmalloc_array with kcalloc when allocating xt. [ 474.680846] BUG: unable to handle kernel paging request at 0000000009600920 [ 474.687869] PGD 2037006067 P4D 2037006067 PUD 2038938067 PMD 0 [ 474.693838] Oops: 0000 [#1] SMP [ 474.697055] CPU: 9 PID: 4662 Comm: ebtables Kdump: loaded Not tainted 4.19.17-11302235.AroraKernelnext.fc18.x86_64 #1 [ 474.707721] Hardware name: Supermicro X9DRT/X9DRT, BIOS 3.0 06/28/2013 [ 474.714313] RIP: 0010:xt_compat_calc_jump+0x2f/0x63 [x_tables] [ 474.720201] Code: 40 0f b6 ff 55 31 c0 48 6b ff 70 48 03 3d dc 45 00 00 48 89 e5 8b 4f 6c 4c 8b 47 60 ff c9 39 c8 7f 2f 8d 14 08 d1 fa 48 63 fa <41> 39 34 f8 4c 8d 0c fd 00 00 00 00 73 05 8d 42 01 eb e1 76 05 8d [ 474.739023] RSP: 0018:ffffc9000943fc58 EFLAGS: 00010207 [ 474.744296] RAX: 0000000000000000 RBX: ffffc90006465000 RCX: 0000000002580249 [ 474.751485] RDX: 00000000012c0124 RSI: fffffffff7be17e9 RDI: 00000000012c0124 [ 474.758670] RBP: ffffc9000943fc58 R08: 0000000000000000 R09: ffffffff8117cf8f [ 474.765855] R10: ffffc90006477000 R11: 0000000000000000 R12: 0000000000000001 [ 474.773048] R13: 0000000000000000 R14: ffffc9000943fcb8 R15: ffffc9000943fcb8 [ 474.780234] FS: 0000000000000000(0000) GS:ffff88a03f840000(0063) knlGS:00000000f7ac7700 [ 474.788612] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 474.794632] CR2: 0000000009600920 CR3: 0000002037422006 CR4: 00000000000606e0 [ 474.802052] Call Trace: [ 474.804789] compat_do_replace+0x1fb/0x2a3 [ebtables] [ 474.810105] compat_do_ebt_set_ctl+0x69/0xe6 [ebtables] [ 474.815605] ? try_module_get+0x37/0x42 [ 474.819716] compat_nf_setsockopt+0x4f/0x6d [ 474.824172] compat_ip_setsockopt+0x7e/0x8c [ 474.828641] compat_raw_setsockopt+0x16/0x3a [ 474.833220] compat_sock_common_setsockopt+0x1d/0x24 [ 474.838458] __compat_sys_setsockopt+0x17e/0x1b1 [ 474.843343] ? __check_object_size+0x76/0x19a [ 474.847960] __ia32_compat_sys_socketcall+0x1cb/0x25b [ 474.853276] do_fast_syscall_32+0xaf/0xf6 [ 474.857548] entry_SYSENTER_compat+0x6b/0x7a Signed-off-by: NFrancesco Ruggeri <fruggeri@arista.com> Acked-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Ilan Peer 提交于
[ Upstream commit 6157ca0d6bfe437691b1e98a62e2efe12b6714da ] When mac80211 requests the low level driver to stop an ongoing Tx aggregation, the low level driver is expected to call ieee80211_stop_tx_ba_cb_irqsafe() to indicate that it is ready to stop the session. The callback in turn schedules a worker to complete the session tear down, which in turn also handles the relevant state for the intermediate Tx queue. However, as this flow in asynchronous, the intermediate queue should be stopped and not continue servicing frames, as in such a case frames that are dequeued would be marked as part of an aggregation, although the aggregation is already been stopped. Fix this by stopping the intermediate Tx queue, before calling the low level driver to stop the Tx aggregation. Signed-off-by: NIlan Peer <ilan.peer@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Johannes Berg 提交于
[ Upstream commit 4926b51bfaa6d36bd6f398fb7698679d3962e19d ] If a driver does any significant activity in its ibss_join method, then it will very well expect that to be called during restart, before any stations are added. Do that. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Dmitry Torokhov 提交于
[ Upstream commit a342083abe576db43594a32d458a61fa81f7cb32 ] We should be using flush_delayed_work() instead of flush_work() in matrix_keypad_stop() to ensure that we are not missing work that is scheduled but not yet put in the workqueue (i.e. its delay timer has not expired yet). Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Dmitry Torokhov 提交于
[ Upstream commit 33a841ce5cef4ca6c18ad333248b6d273f54c839 ] To ensure that TX work is not running after serio port has been torn down, let's flush it when closing the port. Reported-by: NSven Van Asbroeck <thesven73@gmail.com> Acked-by: NDanilo Krummrich <danilokrummrich@dk-develop.de> Reviewed-by: NSven Van Asbroeck <TheSven73@gmail.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Dmitry Torokhov 提交于
[ Upstream commit 628442880af8c201d307a45f3862a7a17df8a189 ] Updating LED state requires access to regmap and therefore we may sleep, so we could not do that directly form set_brightness() method. Historically we used private work to adjust the brightness, but with the introduction of set_brightness_blocking() we no longer need it. As a bonus, not having our own work item means we do not have use-after-free issue as we neglected to cancel outstanding work on driver unbind. Reported-by: NSven Van Asbroeck <thesven73@gmail.com> Reviewed-by: NSven Van Asbroeck <TheSven73@googlemail.com> Acked-by: NJacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Russell King 提交于
[ Upstream commit 50d6b3cf9403879911e06d69c7ef41e43f8f7b4b ] If we have a kernel configured for periodic timer interrupts, and we have cpuidle enabled, then we end up with CPU1 losing timer interupts after a hotplug. This can manifest itself in RCU stall warnings, or userspace becoming unresponsive. The problem is that the kernel initially wants to use the TWD timer for interrupts, but the TWD loses context when we enter the C3 cpuidle state. Nothing reprograms the TWD after idle. We have solved this in the past by switching to broadcast timer ticks, and cpuidle44xx switches to that mode at boot time. However, there is nothing to switch from periodic mode local timers after a hotplug operation. We call tick_broadcast_enter() in omap_enter_idle_coupled(), which one would expect would take care of the issue, but internally this only deals with one-shot local timers - tick_broadcast_enable() on the other hand only deals with periodic local timers. So, we need to call both. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk> [tony@atomide.com: just standardized the subject line] Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Sylwester Nawrocki 提交于
[ Upstream commit 860b454c2c0cbda6892954f5cdbbb48931b3c8db ] This patch moves clk_get_rate() call from trigger() to hw_params() callback to avoid calling sleeping clk API from atomic context and prevent deadlock as indicated below. Before this change clk_get_rate() was being called with same spinlock held as the one passed to the clk API when registering clocks exposed by the I2S driver. [ 82.109780] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908 [ 82.117009] in_atomic(): 1, irqs_disabled(): 128, pid: 1554, name: speaker-test [ 82.124235] 3 locks held by speaker-test/1554: [ 82.128653] #0: cc8c5328 (snd_pcm_link_rwlock){...-}, at: snd_pcm_stream_lock_irq+0x20/0x38 [ 82.137058] #1: ec9eda17 (&(&substream->self_group.lock)->rlock){..-.}, at: snd_pcm_ioctl+0x900/0x1268 [ 82.146417] #2: 6ac279bf (&(&pri_dai->spinlock)->rlock){..-.}, at: i2s_trigger+0x64/0x6d4 [ 82.154650] irq event stamp: 8144 [ 82.157949] hardirqs last enabled at (8143): [<c0a0f574>] _raw_read_unlock_irq+0x24/0x5c [ 82.166089] hardirqs last disabled at (8144): [<c0a0f6a8>] _raw_read_lock_irq+0x18/0x58 [ 82.174063] softirqs last enabled at (8004): [<c01024e4>] __do_softirq+0x3a4/0x66c [ 82.181688] softirqs last disabled at (7997): [<c012d730>] irq_exit+0x140/0x168 [ 82.188964] Preemption disabled at: [ 82.188967] [<00000000>] (null) [ 82.195728] CPU: 6 PID: 1554 Comm: speaker-test Not tainted 5.0.0-rc5-00192-ga6e6caca8f03 #191 [ 82.204302] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 82.210376] [<c0111a54>] (unwind_backtrace) from [<c010d8f4>] (show_stack+0x10/0x14) [ 82.218084] [<c010d8f4>] (show_stack) from [<c09ef004>] (dump_stack+0x90/0xc8) [ 82.225278] [<c09ef004>] (dump_stack) from [<c0152980>] (___might_sleep+0x22c/0x2c8) [ 82.232990] [<c0152980>] (___might_sleep) from [<c0a0a2e4>] (__mutex_lock+0x28/0xa3c) [ 82.240788] [<c0a0a2e4>] (__mutex_lock) from [<c0a0ad80>] (mutex_lock_nested+0x1c/0x24) [ 82.248763] [<c0a0ad80>] (mutex_lock_nested) from [<c04923dc>] (clk_prepare_lock+0x78/0xec) [ 82.257079] [<c04923dc>] (clk_prepare_lock) from [<c049538c>] (clk_core_get_rate+0xc/0x5c) [ 82.265309] [<c049538c>] (clk_core_get_rate) from [<c0766b18>] (i2s_trigger+0x490/0x6d4) [ 82.273369] [<c0766b18>] (i2s_trigger) from [<c074fec4>] (soc_pcm_trigger+0x100/0x140) [ 82.281254] [<c074fec4>] (soc_pcm_trigger) from [<c07378a0>] (snd_pcm_do_start+0x2c/0x30) [ 82.289400] [<c07378a0>] (snd_pcm_do_start) from [<c07376cc>] (snd_pcm_action_single+0x38/0x78) [ 82.298065] [<c07376cc>] (snd_pcm_action_single) from [<c073a450>] (snd_pcm_ioctl+0x910/0x1268) [ 82.306734] [<c073a450>] (snd_pcm_ioctl) from [<c0292344>] (do_vfs_ioctl+0x90/0x9ec) [ 82.314443] [<c0292344>] (do_vfs_ioctl) from [<c0292cd4>] (ksys_ioctl+0x34/0x60) [ 82.321808] [<c0292cd4>] (ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x28) [ 82.329431] Exception stack(0xeb875fa8 to 0xeb875ff0) [ 82.334459] 5fa0: 00033c18 b6e31000 00000004 00004142 00033d80 00033d80 [ 82.342605] 5fc0: 00033c18 b6e31000 00008000 00000036 00008000 00000000 beea38a8 00008000 [ 82.350748] 5fe0: b6e3142c beea384c b6da9a30 b6c9212c [ 82.355789] [ 82.357245] ====================================================== [ 82.363397] WARNING: possible circular locking dependency detected [ 82.369551] 5.0.0-rc5-00192-ga6e6caca8f03 #191 Tainted: G W [ 82.376395] ------------------------------------------------------ [ 82.382548] speaker-test/1554 is trying to acquire lock: [ 82.387834] 6d2007f4 (prepare_lock){+.+.}, at: clk_prepare_lock+0x78/0xec [ 82.394593] [ 82.394593] but task is already holding lock: [ 82.400398] 6ac279bf (&(&pri_dai->spinlock)->rlock){..-.}, at: i2s_trigger+0x64/0x6d4 [ 82.408197] [ 82.408197] which lock already depends on the new lock. [ 82.416343] [ 82.416343] the existing dependency chain (in reverse order) is: [ 82.423795] [ 82.423795] -> #1 (&(&pri_dai->spinlock)->rlock){..-.}: [ 82.430472] clk_mux_set_parent+0x34/0xb8 [ 82.434975] clk_core_set_parent_nolock+0x1c4/0x52c [ 82.440347] clk_set_parent+0x38/0x6c [ 82.444509] of_clk_set_defaults+0xc8/0x308 [ 82.449186] of_clk_add_provider+0x84/0xd0 [ 82.453779] samsung_i2s_probe+0x408/0x5f8 [ 82.458376] platform_drv_probe+0x48/0x98 [ 82.462879] really_probe+0x224/0x3f4 [ 82.467037] driver_probe_device+0x70/0x1c4 [ 82.471716] bus_for_each_drv+0x44/0x8c [ 82.476049] __device_attach+0xa0/0x138 [ 82.480382] bus_probe_device+0x88/0x90 [ 82.484715] deferred_probe_work_func+0x6c/0xbc [ 82.489741] process_one_work+0x200/0x740 [ 82.494246] worker_thread+0x2c/0x4c8 [ 82.498408] kthread+0x128/0x164 [ 82.502131] ret_from_fork+0x14/0x20 [ 82.506204] (null) [ 82.508976] [ 82.508976] -> #0 (prepare_lock){+.+.}: [ 82.514264] __mutex_lock+0x60/0xa3c [ 82.518336] mutex_lock_nested+0x1c/0x24 [ 82.522756] clk_prepare_lock+0x78/0xec [ 82.527088] clk_core_get_rate+0xc/0x5c [ 82.531421] i2s_trigger+0x490/0x6d4 [ 82.535494] soc_pcm_trigger+0x100/0x140 [ 82.539913] snd_pcm_do_start+0x2c/0x30 [ 82.544246] snd_pcm_action_single+0x38/0x78 [ 82.549012] snd_pcm_ioctl+0x910/0x1268 [ 82.553345] do_vfs_ioctl+0x90/0x9ec [ 82.557417] ksys_ioctl+0x34/0x60 [ 82.561229] ret_fast_syscall+0x0/0x28 [ 82.565477] 0xbeea384c [ 82.568421] [ 82.568421] other info that might help us debug this: [ 82.568421] [ 82.576394] Possible unsafe locking scenario: [ 82.576394] [ 82.582285] CPU0 CPU1 [ 82.586792] ---- ---- [ 82.591297] lock(&(&pri_dai->spinlock)->rlock); [ 82.595977] lock(prepare_lock); [ 82.601782] lock(&(&pri_dai->spinlock)->rlock); [ 82.608975] lock(prepare_lock); [ 82.612268] [ 82.612268] *** DEADLOCK *** Fixes: 647d04f8 ("ASoC: samsung: i2s: Ensure the RCLK rate is properly determined") Reported-by: NKrzysztof Kozłowski <krzk@kernel.org> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMark Brown <broonie@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 James Morse 提交于
[ Upstream commit 7d82602909ed9c73b34ad26f05d10db4850a4f8c ] On systems with VHE the kernel and KVM's world-switch code run at the same exception level. Code that is only used on a VHE system does not need to be annotated as __hyp_text as it can reside anywhere in the kernel text. __hyp_text was also used to prevent kprobes from patching breakpoint instructions into this region, as this code runs at a different exception level. While this is no longer true with VHE, KVM still switches VBAR_EL1, meaning a kprobe's breakpoint executed in the world-switch code will cause a hyp-panic. echo "p:weasel sysreg_save_guest_state_vhe" > /sys/kernel/debug/tracing/kprobe_events echo 1 > /sys/kernel/debug/tracing/events/kprobes/weasel/enable lkvm run -k /boot/Image --console serial -p "console=ttyS0 earlycon=uart,mmio,0x3f8" # lkvm run -k /boot/Image -m 384 -c 3 --name guest-1474 Info: Placing fdt at 0x8fe00000 - 0x8fffffff Info: virtio-mmio.devices=0x200@0x10000:36 Info: virtio-mmio.devices=0x200@0x10200:37 Info: virtio-mmio.devices=0x200@0x10400:38 [ 614.178186] Kernel panic - not syncing: HYP panic: [ 614.178186] PS:404003c9 PC:ffff0000100d70e0 ESR:f2000004 [ 614.178186] FAR:0000000080080000 HPFAR:0000000000800800 PAR:1d00007edbadc0de [ 614.178186] VCPU:00000000f8de32f1 [ 614.178383] CPU: 2 PID: 1482 Comm: kvm-vcpu-0 Not tainted 5.0.0-rc2 #10799 [ 614.178446] Call trace: [ 614.178480] dump_backtrace+0x0/0x148 [ 614.178567] show_stack+0x24/0x30 [ 614.178658] dump_stack+0x90/0xb4 [ 614.178710] panic+0x13c/0x2d8 [ 614.178793] hyp_panic+0xac/0xd8 [ 614.178880] kvm_vcpu_run_vhe+0x9c/0xe0 [ 614.178958] kvm_arch_vcpu_ioctl_run+0x454/0x798 [ 614.179038] kvm_vcpu_ioctl+0x360/0x898 [ 614.179087] do_vfs_ioctl+0xc4/0x858 [ 614.179174] ksys_ioctl+0x84/0xb8 [ 614.179261] __arm64_sys_ioctl+0x28/0x38 [ 614.179348] el0_svc_common+0x94/0x108 [ 614.179401] el0_svc_handler+0x38/0x78 [ 614.179487] el0_svc+0x8/0xc [ 614.179558] SMP: stopping secondary CPUs [ 614.179661] Kernel Offset: disabled [ 614.179695] CPU features: 0x003,2a80aa38 [ 614.179758] Memory Limit: none [ 614.179858] ---[ end Kernel panic - not syncing: HYP panic: [ 614.179858] PS:404003c9 PC:ffff0000100d70e0 ESR:f2000004 [ 614.179858] FAR:0000000080080000 HPFAR:0000000000800800 PAR:1d00007edbadc0de [ 614.179858] VCPU:00000000f8de32f1 ]--- Annotate the VHE world-switch functions that aren't marked __hyp_text using NOKPROBE_SYMBOL(). Signed-off-by: NJames Morse <james.morse@arm.com> Fixes: 3f5c90b8 ("KVM: arm64: Introduce VHE-specific kvm_vcpu_run") Acked-by: NMasami Hiramatsu <mhiramat@kernel.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Christoffer Dall 提交于
[ Upstream commit ab2d5eb03dbb7b37a1c6356686fb48626ab0c93e ] We currently initialize the group of private IRQs during kvm_vgic_vcpu_init, and the value of the group depends on the GIC model we are emulating. However, CPUs created before creating (and initializing) the VGIC might end up with the wrong group if the VGIC is created as GICv3 later. Since we have no enforced ordering of creating the VGIC and creating VCPUs, we can end up with part the VCPUs being properly intialized and the remaining incorrectly initialized. That also means that we have no single place to do the per-cpu data structure initialization which depends on knowing the emulated GIC model (which is only the group field). This patch removes the incorrect comment from kvm_vgic_vcpu_init and initializes the group of all previously created VCPUs's private interrupts in vgic_init in addition to the existing initialization in kvm_vgic_vcpu_init. Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Marc Zyngier 提交于
[ Upstream commit 20589c8cc47dce5854c8bf1b44a9fc63d798d26d ] Failing to properly reset system registers is pretty bad. But not quite as bad as bringing the whole machine down... So warn loudly, but slightly more gracefully. Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Acked-by: NChristoffer Dall <christoffer.dall@arm.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Marc Zyngier 提交于
[ Upstream commit 358b28f09f0ab074d781df72b8a671edb1547789 ] The current kvm_psci_vcpu_on implementation will directly try to manipulate the state of the VCPU to reset it. However, since this is not done on the thread that runs the VCPU, we can end up in a strangely corrupted state when the source and target VCPUs are running at the same time. Fix this by factoring out all reset logic from the PSCI implementation and forwarding the required information along with a request to the target VCPU. Reviewed-by: NAndrew Jones <drjones@redhat.com> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Christoffer Dall 提交于
[ Upstream commit e761a927bc9a7ee6ceb7c4f63d5922dbced87f0d ] We have two ways to reset a vcpu: - either through VCPU_INIT - or through a PSCI_ON call The first one is easy to reason about. The second one is implemented in a more bizarre way, as it is the vcpu that handles PSCI_ON that resets the vcpu that is being powered-on. As we need to turn the logic around and have the target vcpu to reset itself, we must take some preliminary steps. Resetting the VCPU state modifies the system register state in memory, but this may interact with vcpu_load/vcpu_put if running with preemption disabled, which in turn may lead to corrupted system register state. Address this by disabling preemption and doing put/load if required around the reset logic. Reviewed-by: NAndrew Jones <drjones@redhat.com> Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Kuninori Morimoto 提交于
[ Upstream commit d9111d36024de07784f2e1ba2ccf70b16035f378 ] commit 4d230d12 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic") added new rsnd_ssi_prepare() and moved rsnd_ssi_master_clk_start() to .prepare. But, ssi user count (= ssi->usrcnt) is incremented at .init (= rsnd_ssi_init()). Because of these timing exchange, ssi->usrcnt check at rsnd_ssi_master_clk_start() should be adjusted. Otherwise, 2nd master clock setup will be no check. This patch fixup this issue. Fixes: commit 4d230d12 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic") Reported-by: NYusuke Goda <yusuke.goda.sx@renesas.com> Reported-by: NValentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: NYusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Pierre-Louis Bossart 提交于
[ Upstream commit c16e12010060c6c7a31f08b4a99513064cb53b7d ] KASAN reports and additional traces point to out-of-bounds accesses to the dapm_up_seq and dapm_down_seq lookup tables. The indices used are larger than the array definition. Fix by adding missing entries for the new widget types in these two lookup tables, and align them with PGA values. Also the sequences for the following widgets were not defined. Since their values defaulted to zero, assign them explicitly snd_soc_dapm_input snd_soc_dapm_output snd_soc_dapm_vmid snd_soc_dapm_siggen snd_soc_dapm_sink Fixes: 8a70b454 ('ASoC: dapm: Add new widget type for constructing DAPM graphs on DSPs.'). Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: NMark Brown <broonie@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Yizhuo 提交于
[ Upstream commit dc30e70391376ba3987aeb856ae6d9c0706534f1 ] In function omap4_dsi_mux_pads(), local variable "reg" could be uninitialized if function regmap_read() returns -EINVAL. However, it will be used directly in the later context, which is potentially unsafe. Signed-off-by: NYizhuo <yzhai003@ucr.edu> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Tony Lindgren 提交于
[ Upstream commit 0840242e887586268f665bf58d5e1a7d6ebf35ed ] Commit 84badc5e ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc") moved some omap4 timers to probe with ti-sysc interconnect target module. Turns out this broke pwm-omap-dmtimer for reparenting of the timer clock. With ti-sysc, we can now configure the clock sources in the dts with assigned-clocks and assigned-clock-parents. Fixes: 84badc5e ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc") Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Reported-by: NH. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Paweł Chmiel 提交于
[ Upstream commit 94803aef3533676194c772383472636c453e3147 ] This patch fixes order of disable calls in pwm_vibrator_stop. Currently when starting device, we first enable vcc regulator and then setup and enable pwm. When stopping, we should do this in oposite order, so first disable pwm and then disable regulator. Previously order was the same as in start. Signed-off-by: NPaweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Jonathan Bakker 提交于
[ Upstream commit 3ca232df9921f083c3b37ba5fbc76f4d9046268b ] pwm_vibrator_stop disables the regulator, but it can be called from multiple places, even when the regulator is already disabled. Fix this by using regulator_is_enabled check when starting and stopping device. Signed-off-by: NJonathan Bakker <xc-racer2@live.ca> Signed-off-by: NPaweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Stefan Haberland 提交于
[ Upstream commit 4a8ef6999bce998fa5813023a9a6b56eea329dba ] Dan Carpenter reported the following: The patch 52898025: "[S390] dasd: security and PSF update patch for EMC CKD ioctl" from Mar 8, 2010, leads to the following static checker warning: drivers/s390/block/dasd_eckd.c:4486 dasd_symm_io() error: using offset into zero size array 'psf_data[]' drivers/s390/block/dasd_eckd.c 4458 /* Copy parms from caller */ 4459 rc = -EFAULT; 4460 if (copy_from_user(&usrparm, argp, sizeof(usrparm))) ^^^^^^^ The user can specify any "usrparm.psf_data_len". They choose zero by mistake. 4461 goto out; 4462 if (is_compat_task()) { 4463 /* Make sure pointers are sane even on 31 bit. */ 4464 rc = -EINVAL; 4465 if ((usrparm.psf_data >> 32) != 0) 4466 goto out; 4467 if ((usrparm.rssd_result >> 32) != 0) 4468 goto out; 4469 usrparm.psf_data &= 0x7fffffffULL; 4470 usrparm.rssd_result &= 0x7fffffffULL; 4471 } 4472 /* alloc I/O data area */ 4473 psf_data = kzalloc(usrparm.psf_data_len, GFP_KERNEL | GFP_DMA); 4474 rssd_result = kzalloc(usrparm.rssd_result_len, GFP_KERNEL | GFP_DMA); 4475 if (!psf_data || !rssd_result) { kzalloc() returns a ZERO_SIZE_PTR (0x16). 4476 rc = -ENOMEM; 4477 goto out_free; 4478 } 4479 4480 /* get syscall header from user space */ 4481 rc = -EFAULT; 4482 if (copy_from_user(psf_data, 4483 (void __user *)(unsigned long) usrparm.psf_data, 4484 usrparm.psf_data_len)) That all works great. 4485 goto out_free; 4486 psf0 = psf_data[0]; 4487 psf1 = psf_data[1]; But now we're assuming that "->psf_data_len" was at least 2 bytes. Fix this by checking the user specified length psf_data_len. Fixes: 52898025 ("[S390] dasd: security and PSF update patch for EMC CKD ioctl") Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NStefan Haberland <sth@linux.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Enric Balletbo i Serra 提交于
[ Upstream commit 26cd8657c7e745686a4c54a5cccf721ede208a25 ] Ports are described by child 'port' nodes contained in the device node. 'ports' is optional and is used to group all 'port' nodes which is not the case here. This patch fixes the following warnings: arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts:25.9-29.5: Warning (graph_port): /edp-panel/ports: graph port node name should be 'port' arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts:46.9-50.5: Warningi (graph_port): /edp-panel/ports: graph port node name should be 'port' arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts:94.9-98.5: Warning (graph_port): /edp-panel/ports: graph port node name should be 'port' Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Julien Thierry 提交于
[ Upstream commit fc3bc475231e12e9c0142f60100cf84d077c79e1 ] vgic_dist->lpi_list_lock must always be taken with interrupts disabled as it is used in interrupt context. For configurations such as PREEMPT_RT_FULL, this means that it should be a raw_spinlock since RT spinlocks are interruptible. Signed-off-by: NJulien Thierry <julien.thierry@arm.com> Acked-by: NChristoffer Dall <christoffer.dall@arm.com> Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Tony Lindgren 提交于
[ Upstream commit 983a5a43ec254cd5ddf3254db80ca96e8f8bb2a4 ] Commit 84badc5e ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc") moved some omap4 timers to probe with ti-sysc interconnect target module. Turns out this broke pwm-omap-dmtimer where we now try to reparent the clock to itself with the following: omap_dm_timer_of_set_source: failed to set parent With ti-sysc, we can now configure the clock sources in the dts with assigned-clocks and assigned-clock-parents. So we should be able to remove omap_dm_timer_of_set_source with clean-up patches later on. But for now, let's just fix it first by checking if parent and fck are the same and bail out of so. Fixes: 84badc5e ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc") Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Reported-by: NH. Nikolaus Schaller <hns@goldelico.com> Tested-By: NAndreas Kemnade <andreas@kemnade.info> Tested-By: NH. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Shuming Fan 提交于
[ Upstream commit 8077ec011b1ea26abb7ca786f28ecccfb352717f ] AD/DA ASRC function control two ASRC clock sources separately. Whether AD/DA filter select which clock source, we enable AD/DA ASRC function for all cases. Signed-off-by: NShuming Fan <shumingf@realtek.com> Signed-off-by: NMark Brown <broonie@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Steve Longerbeam 提交于
[ Upstream commit bb867d219fda7fbaabea3314702474c4eac2b91d ] The CSI offsets are wrong for both CSI0 and CSI1. They are at physical address 0x1e030000 and 0x1e038000 respectively. Fixes: 2ffd48f2 ("gpu: ipu-v3: Add Camera Sensor Interface unit") Signed-off-by: NSteve Longerbeam <slongerbeam@gmail.com> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Julia Lawall 提交于
[ Upstream commit aa3312012f103f91f123600bbf768b11c8f431bc ] The device node iterators perform an of_node_get on each iteration, so a jump out of the loop requires an of_node_put. Move the initialization channel->child = child; down to just before the call to imx_ldb_register so that intervening failures don't need to clear it. Add a label at the end of the function to do all the of_node_puts. The semantic patch that finds part of this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; iterator name for_each_child_of_node; @@ for_each_child_of_node(root, child) { ... when != of_node_put(child) when != e = child ( return child; | * return ...; ) ... } // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Alexander Shiyan 提交于
[ Upstream commit 2c0408dd0d8906b26fe8023889af7adf5e68b2c2 ] The CSI0/CSI1 registers offset is at +0xe030000/+0xe038000 relative to the control module registers on IPUv3EX. This patch fixes wrong values for i.MX51 CSI0/CSI1. Fixes: 2ffd48f2 ("gpu: ipu-v3: Add Camera Sensor Interface unit") Signed-off-by: NAlexander Shiyan <shc_work@mail.ru> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Philipp Zabel 提交于
[ Upstream commit 4fb873c9648e383206e0a91cef9b03aa54066aca ] This patch fixes backtraces like the following when sending SIGKILL to a process with a currently pending plane update: [drm:ipu_plane_atomic_check] CRTC should be enabled [drm:drm_framebuffer_remove] *ERROR* failed to commit ------------[ cut here ]------------ WARNING: CPU: 3 PID: 63 at drivers/gpu/drm/drm_framebuffer.c:926 drm_framebuffer_remove+0x47c/0x498 atomic remove_fb failed with -22 Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Zhang Zhijie 提交于
commit c1c214adcb56d36433480c8fedf772498e7e539c upstream. For chain mode in cipher(eg. AES-CBC/DES-CBC), the iv is continuously updated in the operation. The new iv value should be written to device register by software. Reported-by: NEric Biggers <ebiggers@google.com> Fixes: 433cd2c6 ("crypto: rockchip - add crypto driver for rk3288") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: NZhang Zhijie <zhangzj@rock-chips.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Zhang Zhijie 提交于
commit 4359669a087633132203c52d67dd8c31e09e7b2e upstream. In some cases, the nents of src scatterlist is different from dst scatterlist. So two variables are used to handle the nents of src&dst scatterlist. Reported-by: NEric Biggers <ebiggers@google.com> Fixes: 433cd2c6 ("crypto: rockchip - add crypto driver for rk3288") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: NZhang Zhijie <zhangzj@rock-chips.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Eric Biggers 提交于
commit 77568e535af7c4f97eaef1e555bf0af83772456c upstream. Hash algorithms with an alignmask set, e.g. "xcbc(aes-aesni)" and "michael_mic", fail the improved hash tests because they sometimes produce the wrong digest. The bug is that in the case where a scatterlist element crosses pages, not all the data is actually hashed because the scatterlist walk terminates too early. This happens because the 'nbytes' variable in crypto_hash_walk_done() is assigned the number of bytes remaining in the page, then later interpreted as the number of bytes remaining in the scatterlist element. Fix it. Fixes: 900a081f ("crypto: ahash - Fix early termination in hash walk") Cc: stable@vger.kernel.org Signed-off-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Eric Biggers 提交于
commit 6c2e322b3621dc8be72e5c86d4fdb587434ba625 upstream. The memcpy() in crypto_cfb_decrypt_inplace() uses walk->iv as both the source and destination, which has undefined behavior. It is unneeded because walk->iv is already used to hold the previous ciphertext block; thus, walk->iv is already updated to its final value. So, remove it. Also, note that in-place decryption is the only case where the previous ciphertext block is not directly available. Therefore, as a related cleanup I also updated crypto_cfb_encrypt_segment() to directly use the previous ciphertext block rather than save it into walk->iv. This makes it consistent with in-place encryption and out-of-place decryption; now only in-place decryption is different, because it has to be. Fixes: a7d85e06 ("crypto: cfb - add support for Cipher FeedBack mode") Cc: <stable@vger.kernel.org> # v4.17+ Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Eric Biggers 提交于
commit 394a9e044702e6a8958a5e89d2a291605a587a2a upstream. Like some other block cipher mode implementations, the CFB implementation assumes that while walking through the scatterlist, a partial block does not occur until the end. But the walk is incorrectly being done with a blocksize of 1, as 'cra_blocksize' is set to 1 (since CFB is a stream cipher) but no 'chunksize' is set. This bug causes incorrect encryption/decryption for some scatterlist layouts. Fix it by setting the 'chunksize'. Also extend the CFB test vectors to cover this bug as well as cases where the message length is not a multiple of the block size. Fixes: a7d85e06 ("crypto: cfb - add support for Cipher FeedBack mode") Cc: <stable@vger.kernel.org> # v4.17+ Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gilad Ben-Yossef 提交于
commit 2b5ac17463dcb2411fed506edcf259a89bb538ba upstream. For decryption in CBC mode we need to save the last ciphertext block for use as the next IV. However, we were trying to do this also with zero sized ciphertext resulting in a panic. Fix this by only doing the copy if the ciphertext length is at least of IV size. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Cc: stable@vger.kernel.org Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gilad Ben-Yossef 提交于
commit c139c72e2beb3e3db5148910b3962b7322e24374 upstream. We were copying the last ciphertext block into the IV field for CBC before removing the DMA mapping of the output buffer with the result of the buffer sometime being out-of-sync cache wise and were getting intermittent cases of bad output IV. Fix it by moving the DMA buffer unmapping before the copy. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Fixes: 00904aa0 ("crypto: ccree - fix iv handling") Cc: <stable@vger.kernel.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Hadar Gat 提交于
commit a49411959ea6d4915a9fd2a7eb5ba220e6284e9a upstream. In cc_unmap_aead_request(), call dma_pool_free() for mlli buffer only if an item is allocated from the pool and not always if there is a pool allocated. This fixes a kernel panic when trying to free a non-allocated item. Cc: stable@vger.kernel.org Signed-off-by: NHadar Gat <hadar.gat@arm.com> Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Horia Geantă 提交于
commit c19650d6ea99bcd903d3e55dd61860026c701339 upstream. Roland reports the following issue and provides a root cause analysis: "On a v4.19 i.MX6 system with IMA and CONFIG_DMA_API_DEBUG enabled, a warning is generated when accessing files on a filesystem for which IMA measurement is enabled: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at kernel/dma/debug.c:1181 check_for_stack.part.9+0xd0/0x120 caam_jr 2101000.jr0: DMA-API: device driver maps memory from stack [addr=b668049e] Modules linked in: CPU: 0 PID: 1 Comm: switch_root Not tainted 4.19.0-20181214-1 #2 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: [<c010efb8>] (dump_backtrace) from [<c010f2d0>] (show_stack+0x20/0x24) [<c010f2b0>] (show_stack) from [<c08b04f4>] (dump_stack+0xa0/0xcc) [<c08b0454>] (dump_stack) from [<c012b610>] (__warn+0xf0/0x108) [<c012b520>] (__warn) from [<c012b680>] (warn_slowpath_fmt+0x58/0x74) [<c012b62c>] (warn_slowpath_fmt) from [<c0199acc>] (check_for_stack.part.9+0xd0/0x120) [<c01999fc>] (check_for_stack.part.9) from [<c019a040>] (debug_dma_map_page+0x144/0x174) [<c0199efc>] (debug_dma_map_page) from [<c065f7f4>] (ahash_final_ctx+0x5b4/0xcf0) [<c065f240>] (ahash_final_ctx) from [<c065b3c4>] (ahash_final+0x1c/0x20) [<c065b3a8>] (ahash_final) from [<c03fe278>] (crypto_ahash_op+0x38/0x80) [<c03fe240>] (crypto_ahash_op) from [<c03fe2e0>] (crypto_ahash_final+0x20/0x24) [<c03fe2c0>] (crypto_ahash_final) from [<c03f19a8>] (ima_calc_file_hash+0x29c/0xa40) [<c03f170c>] (ima_calc_file_hash) from [<c03f2b24>] (ima_collect_measurement+0x1dc/0x240) [<c03f2948>] (ima_collect_measurement) from [<c03f0a60>] (process_measurement+0x4c4/0x6b8) [<c03f059c>] (process_measurement) from [<c03f0cdc>] (ima_file_check+0x88/0xa4) [<c03f0c54>] (ima_file_check) from [<c02d8adc>] (path_openat+0x5d8/0x1364) [<c02d8504>] (path_openat) from [<c02dad24>] (do_filp_open+0x84/0xf0) [<c02daca0>] (do_filp_open) from [<c02cf50c>] (do_open_execat+0x84/0x1b0) [<c02cf488>] (do_open_execat) from [<c02d1058>] (__do_execve_file+0x43c/0x890) [<c02d0c1c>] (__do_execve_file) from [<c02d1770>] (sys_execve+0x44/0x4c) [<c02d172c>] (sys_execve) from [<c0101000>] (ret_fast_syscall+0x0/0x28) ---[ end trace 3455789a10e3aefd ]--- The cause is that the struct ahash_request *req is created as a stack-local variable up in the stack (presumably somewhere in the IMA implementation), then passed down into the CAAM driver, which tries to dma_single_map the req->result (indirectly via map_seq_out_ptr_result) in order to make that buffer available for the CAAM to store the result of the following hash operation. The calling code doesn't know how req will be used by the CAAM driver, and there could be other such occurrences where stack memory is passed down to the CAAM driver. Therefore we should rather fix this issue in the CAAM driver where the requirements are known." Fix this problem by: -instructing the crypto engine to write the final hash in state->caam_ctx -subsequently memcpy-ing the final hash into req->result Cc: <stable@vger.kernel.org> # v4.19+ Reported-by: NRoland Hieber <rhi@pengutronix.de> Signed-off-by: NHoria Geantă <horia.geanta@nxp.com> Tested-by: NRoland Hieber <rhi@pengutronix.de> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Pankaj Gupta 提交于
commit 42e95d1f10dcf8b18b1d7f52f7068985b3dc5b79 upstream. when the source sg contains more than 1 fragment and destination sg contains 1 fragment, the caam driver mishandle the buffers to be sent to caam. Fixes: f2147b88 ("crypto: caam - Convert GCM to new AEAD interface") Cc: <stable@vger.kernel.org> # 4.2+ Signed-off-by: NPankaj Gupta <pankaj.gupta@nxp.com> Signed-off-by: NArun Pathak <arun.pathak@nxp.com> Reviewed-by: NHoria Geanta <horia.geanta@nxp.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gustavo A. R. Silva 提交于
commit b5be853181a8d4a6e20f2073ccd273d6280cad88 upstream. Add missing break statement in order to prevent the code from falling through to case S_DIN_to_DES. This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: 63ee04c8 ("crypto: ccree - add skcipher support") Cc: stable@vger.kernel.org Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-