A few of these managed to sneak back in, get rid of them once
and for all.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Ignore build-time generated files.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Get all of the defconfigs building again.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Some old rtc and io headers were left hanging around, kill them off..
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

CPU sub-types set the pclk default in Kconfig, add one
for SH7705.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Sync up all of the defconfigs, and kill off a few old ones..
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ehca: Tweak trace message format
  IB/ehca: Fix device registration
  IB/ipath: Fix RDMA reads
  RDMA/cma: Optimize error handling
  RDMA/cma: Eliminate unnecessary remove_list
  RDMA/cma: Set status correctly on route resolution error
  RDMA/cma: Fix device removal race
  RDMA/cma: Fix leak of cm_ids in case of failures

Add an extra space to make things more readable.
Signed-off-by: NHoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Move the call to ib_register_device() later, since a device should not
be registered until it is completely read to be used.  This fixes
crashes that occur if an upper-layer driver such as IPoIB is loaded
before the ehca module.
Signed-off-by: NHoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The PSN used to generate the request following a RDMA read was
incorrect and some state booking wasn't maintained correctly.  This
patch fixes that.
Signed-off-by: NRalph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>

Reorganize code relating to cma_get_net_info() and rdam_create_id() to
optimize error case handling (no need to alloc memory/etc. as part of
rdma_create_id() if input parameters are wrong).
Signed-off-by: NKrishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Eliminate remove_list by using list_del_init() instead during device
removal handling.
Signed-off-by: NKrishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

On reporting a route error, also include the status for the error,
rather than indicating a status of 0 when an error has occurred.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The race is as follows:

A process : cma_process_remove() calls cma_remove_id_dev(),
	    which sets id state to CMA_DEVICE_REMOVAL and
	    calls wait_event(dev_remove).

B process : cma_req_handler() had incremented dev_remove,
	    and calls cma_acquire_ib_dev() and on failure
	    calls cma_release_remove(), which does a
	    wake_up of cma_process_remove(). Then
	    cma_req_handler() calls rdma_destroy_id();

A Process : cma_remove_id_dev() gets woken and checks the
	    state of id, and since it is still (wrongly)
	    CMA_DEVICE_REMOVAL, it calls notify_user(id)
	    and if that fails, the caller - cma_process_remove()
	    calls rdma_destroy_id(id). Two processes can
	    call rdma_destroy_id(), resulting in one
	    de-referencing kfreed id_priv.

Fix is for process B to set CMA_DESTROYING in cma_req_handler()
so that process A will return instead of doing a rdma_destroy_id().
Signed-off-by: NKrishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

cma_connect_ib() and cma_connect_iw() leak cm_id's in failure cases.
Signed-off-by: NKrishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] improve machzwd detection
  [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl()
  [WATCHDOG] s3c24XX nowayout
  [WATCHDOG] pnx4008: add cpu_relax()
  [WATCHDOG] pnx4008_wdt.c - spinlock fixes.
  [WATCHDOG] pnx4008_wdt.c - remove patch
  [WATCHDOG] pnx4008_wdt.c - nowayout patch
  [WATCHDOG] pnx4008: add watchdog support
  [WATCHDOG] i8xx_tco remove pci_find_device.
  [WATCHDOG] alim remove pci_find_device

On a machine with no machzwd, loading the module prints out..

machzwd: MachZ ZF-Logic Watchdog driver initializing.
0xffff
machzwd: Watchdog using action = RESET

- the 0xffff printk is unnecessary
- 0xffff seems to be 'hardware not present'
- fix CodingStyle. (This driver could use some more work here)
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

Return ENOTTY instead of ENOIOCTLCMD in user-visible ioctl() results

The watchdog drivers used to return ENOIOCTLCMD for bad ioctl() commands.
ENOIOCTLCMD should not be visible by the user, so use ENOTTY instead.
Signed-off-by: NSamuel Tardieu <sam@rfc1149.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

If the driver is not configured for `no way out`,
then the open method should not automatically allow
the setting of allow_close to CLOSE_STATE_ALLOW.

The setting of allow_close nullifies the use of
the magic close via the write path. It means that
in the default state, the watchdog will shut-down
even if the magic close has not been issued.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Added cpu_relax as suggested by Alan Cox.
Signed-off-by: NVitaly Wool <vitalywool@gmail.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Add io spinlocks to prevent possible race
conditions between start and stop operations
that are issued from different child processes
where the master process opened /dev/watchdog.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Duh.  I screwed up editing David Howells patch in commit
3f2e05e9, and the actual declaration for
the sigset_from_compat() function went missing. My bad.

Olaf Hering saved the day and noticed that I'm a moron.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Change remove code so that we first detach
the driver from userspace, then clean up the
clock and then clean up the memory we allocated.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Change nowayout to: WATCHDOG_NOWAYOUT as defined
in include/linux/watchdog.h .
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Add watchdog support for Philips PNX4008 ARM board inlined.
Signed-off-by: NVitaly Wool <vitalywool@gmail.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use refcounting for pci device obtaining.
Use PCI_DEVICE macro.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Cc: Andrew Morton <akpm@osdl.org>

Convert pci_find_device to pci_get_device + pci_dev_put
in alim watchdog cards' drivers (refcounting).
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (37 commits)
  [netdrvr] hp100: encapsulate all non-module code
  drivers/net/wireless/{airo,ipw2100}: fix error handling bugs
  [netdrvr] phy: Fix bugs in error handling
  [PATCH] spidernet: Use pci_dma_mapping_error()
  [PATCH] sky2: version 1.9
  [PATCH] sky2: fragmented receive for large MTU
  [PATCH] sky2: use netif_tx_lock instead of LLTX
  [PATCH] sky2: incremental transmit completion
  [PATCH] sky2: name irq after eth for irqbalance
  [PATCH] sky2: workarounds for some 88e806x chips
  [PATCH] sky2: use standard pci register capabilties for error register
  [PATCH] sky2: gigabit full duplex negotiation
  e100, e1000, ixgb: increment version numbers
  ixgb: convert to netdev_priv(netdev)
  ixgb: combine more rx descriptors to improve performance
  e1000: possible memory leak in e1000_set_ringparam
  e1000: Janitor: Use #defined values for literals
  e1000: don't strip vlan ID if 8021q claims it
  e1000: rework polarity, NVM, eeprom code and fixes.
  e1000: driver state fixes (race fix)
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
  JFS: White space cleanup
  [PATCH] JFS: return correct error when i-node allocation failed
  JFS: Remove shadow variable from fs/jfs/jfs_txnmgr.c:xtLog()

* git://git.infradead.org/mtd-2.6:
  [MTD] Cleanup of 'ioremap balanced with iounmap for drivers/mtd subsystem'
  [MTD] fix nftl_write warning
  [MTD] fix printk warning
  [MTD ONENAND] Check OneNAND lock scheme & all block unlock command support
  [MTD ONENAND] Remove unused MTD_ONENAND_SYNC_READ configuration
  [MTD ONENAND] Fix OneNAND probe
  [MTD NAND] Provide prototype for newly-exported nand_wait_ready()
  [MTD] Remove #ifndef __KERNEL__ hack in <mtd/mtd-abi.h>
  [MTD NAND] Allow override of page read and write functions.
  [MTD NAND] Allocate chip->buffers separately to allow it to be overridden
  [MTD NAND] Split nand_scan() into two parts; allow board driver to intervene
  [MTD NAND] Export nand_wait_ready() for use by board drivers

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (35 commits)
  Input: wistron - add support for Acer TravelMate 2424NWXCi
  Input: wistron - fix setting up special buttons
  Input: add KEY_BLUETOOTH and KEY_WLAN definitions
  Input: add new BUS_VIRTUAL bus type
  Input: add driver for stowaway serial keyboards
  Input: make input_register_handler() return error codes
  Input: remove cruft that was needed for transition to sysfs
  Input: fix input module refcounting
  Input: constify input core
  Input: libps2 - rearrange exports
  Input: atkbd - support Microsoft Natural Elite Pro keyboards
  Input: i8042 - disable MUX mode on Toshiba Equium A110
  Input: i8042 - get rid of polling timer
  Input: send key up events at disconnect
  Input: constify psmouse driver
  Input: i8042 - add Amoi to the MUX blacklist
  Input: logips2pp - add sugnature 56 (Cordless MouseMan Wheel), cleanup
  Input: add driver for Touchwin serial touchscreens
  Input: add driver for Touchright serial touchscreens
  Input: add driver for Penmount serial touchscreens
  ...

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Remove unused galileo-boars header files
  [MIPS] Rename SERIAL_PORT_DEFNS for EV64120
  [MIPS] Add UART IRQ number for EV64120
  [MIPS] Remove excite_flash.c
  [MIPS] Update i8259 resources.
  [MIPS] Make unwind_stack() can dig into interrupted context
  [MIPS] Stacktrace build-fix and improvement
  [MIPS] QEMU: Add support for little endian mips
  [MIPS] Remove __flush_icache_page
  [MIPS] lockdep: update defconfigs
  [MIPS] lockdep: Add STACKTRACE_SUPPORT and enable LOCKDEP_SUPPORT
  [MIPS] lockdep: fix TRACE_IRQFLAGS_SUPPORT

Revert Andrew Morton's patch to temporarily hack around the lack of a
declaration of sigset_t in linux/compat.h to make the block-disablement
patches build on IA64.  This got accidentally pushed to Linus and should
be fixed in a different manner.

Also make linux/compat.h #include asm/signal.h to gain a definition of
sigset_t so that it can externally declare sigset_from_compat().

This has been compile-tested for i386, x86_64, ia64, mips, mips64, frv, ppc and
ppc64 and run-tested on frv.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There are a few places in the kernel where the init task is signaled.  The
ctrl+alt+del sequence is one them.  It kills a task, usually init, using a
cached pid (cad_pid).

This patch replaces the pid_t by a struct pid to avoid pid wrap around
problem.  The struct pid is initialized at boot time in init() and can be
modified through systctl with

	/proc/sys/kernel/cad_pid

[ I haven't found any distro using it ? ]

It also introduces a small helper routine kill_cad_pid() which is used
where it seemed ok to use cad_pid instead of pid 1.

[akpm@osdl.org: cleanups, build fix]
Signed-off-by: NCedric Le Goater <clg@fr.ibm.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

proc_pid_make_inode:

	ei->pid = get_pid(task_pid(task));

I think this is not safe.  get_pid() can be preempted after checking "pid
!= NULL".  Then the task exits, does detach_pid(), and RCU frees the pid.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It was pointed out that since I am taking ARRAY_SIZE anyway the trailing empty
entry is silly and just wastes space.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The value doesn't change but this ensures I will have the proper value when
other files are added to proc_base_stuff.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

task_state() needs tasklist_lock to protect ->parent/->real_parent.  However
task->parent points to nowhere only when the actions below happen in order

	1) release_task(task)
	2) release_task(task->parent)
	3) a grace period passed

But 3) implies that the memory ops from 1) should be finished, so pid_alive()
can't be true in such a case.

Otherwise, we don't care if ->parent/->real_parent changes under us.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>