- 10 3月, 2007 40 次提交
-
-
由 Kristian Høgsberg 提交于
Without this, pending transactions will dereference freed memory if they complete after the device file has been closed. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
The old async transmit context handling was starting and stopping DMA for every packet transmission. This could cause silently failing packet transmission, if the DMA was reprogrammed too close to being stopped. The general context code keeps DMA running at all times and fixes this problem. It's also a nice cleanup. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Drop the event list semaphore and only use the wait queue and the list to synchronize queue access. Break out of a poll or read whenever the device is disconnected. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
The mod_timer based timing out of orb was a little to agressive and would time out legit, but long-lived scsi cmds. Besides, the scsi stack keeps track of this already. Since we're only timing out management orbs, go back to wait_for_completion_timeout. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
The old mechanism kept a struct cdev for each fw device, but fops->release would reference this struct after the device got freed in some cases. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Repurpose the get_config_rom ioctl to a general get_info ioctl. This ioctl is now used for version negotiation, and optionally returns the config rom, and the current bus info. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Use PREPARE_DELAYED_WORK to just change the function pointer. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
We can't take the klist lock for the child device list in interrupt context. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Some flaky controllers doesn't honor the masterIntEnable bits and can generate bus reset events even if that bit is cleared. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
This lets us break out "Juju" as the model name in the config rom. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Thomas Gleixner 提交于
The obsolete SA_xxx interrupt flags have been used despite the scheduled removal. Fixup the remaining users in -mm. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Remove space before tab and trailing whitespace. Unify indentation of goto target labels. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
We need the channel number as we queue up iso packets for transmission so we can fill out the header correctly. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
When a DMA descriptor is appended to the context we sync it for DMA and the device might potentially read it immediately. So, we can't set the IRQ bits in the descriptor after appending. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
When the DMA is setup to not strip any headers, we need to use the buffer fill descriptor instead of the dual buffer, since the dual buffer descriptor must strip a non-zero number of header quadlets. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
The descriptor circular buffer logic used for iso transmission is useful for async transmit too, so pull the sharable logic out in a few standalone functions. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
This patch splits out the iso buffer so we can initialize it at mmap time with the size provided in the mmap call. Furthermore, allocate the backing pages using alloc_page to avoid setting up kernel side virtual memory mappings for the pages. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
The *Clear registers returns the masked value when read which is what we want. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Pointed out by Pete Zaitcev. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Høgsberg <krh@redhat.com> Use atomic_inc_return. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
This lets the SCSI stack retry the command when a SCSI command is interrupted by a FireWire bus reset. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
This prevents superfluous bus traffic as fw-sbp2 logs in only to get kicked off the device by another bus reset as the driver core does bus management. Scheduling it this way lets the driver core finish bus management before higher level drivers get the update callback. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-