Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 25 1月, 2013 19 次提交
  3. 24 1月, 2013 16 次提交
  5. 23 1月, 2013 5 次提交
    • T
      ALSA: hda - Fix inconsistent pin states after resume · 31614bb8
      由 Takashi Iwai 提交于 
      The commit [26a6cb6c: ALSA: hda - Implement a poll loop for jacks as a
module parameter] introduced the polling jack detection code, but it
also moved the call of snd_hda_jack_set_dirty_all() in the resume path
after resume/init ops call.  This caused a regression when the jack
state has been changed during power-down (e.g. in the power save
mode).  Since the driver doesn't probe the new jack state but keeps
using the cached value due to no dirty flag, the pin state remains
also as if the jack is still plugged.

The fix is simply moving snd_hda_jack_set_dirty_all() to the original
position.
Reported-by: NManolo Díaz <diaz.manolo@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      31614bb8
    • S
      ring-buffer: Remove trace.h from ring_buffer.c · 0b07436d
      由 Steven Rostedt 提交于 
      ring_buffer.c use to require declarations from trace.h, but
these have moved to the generic header files. There's nothing
in trace.h that ring_buffer.c requires.

There's some headers that trace.h included that ring_buffer.c
needs, but it's best that it includes them directly, and not
include trace.h.

Also, some things may use ring_buffer.c without having tracing
configured. This removes the dependency that may come in the
future.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      0b07436d
    • S
      ring-buffer: User context bit recursion checking · 567cd4da
      由 Steven Rostedt 提交于 
      Using context bit recursion checking, we can help increase the
performance of the ring buffer.

Before this patch:

 # echo function > /debug/tracing/current_tracer
 # for i in `seq 10`; do ./hackbench 50; done
Time: 10.285
Time: 10.407
Time: 10.243
Time: 10.372
Time: 10.380
Time: 10.198
Time: 10.272
Time: 10.354
Time: 10.248
Time: 10.253

(average: 10.3012)

Now we have:

 # echo function > /debug/tracing/current_tracer
 # for i in `seq 10`; do ./hackbench 50; done
Time: 9.712
Time: 9.824
Time: 9.861
Time: 9.827
Time: 9.962
Time: 9.905
Time: 9.886
Time: 10.088
Time: 9.861
Time: 9.834

(average: 9.876)

 a 4% savings!
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      567cd4da
    • S
      ftrace: Use only the preempt version of function tracing · 897f68a4
      由 Steven Rostedt 提交于 
      The function tracer had two different versions of function tracing.

The disabling of irqs version and the preempt disable version.

As function tracing in very intrusive and can cause nasty recursion
issues, it has its own recursion protection. But the old method to
do this was a flat layer. If it detected that a recursion was happening
then it would just return without recording.

This made the preempt version (much faster than the irq disabling one)
not very useful, because if an interrupt were to occur after the
recursion flag was set, the interrupt would not be traced at all,
because every function that was traced would think it recursed on
itself (due to the context it preempted setting the recursive flag).

Now that we have a recursion flag for every context level, we
no longer need to worry about that. We can disable preemption,
set the current context recursion check bit, and go on. If an
interrupt were to come along, it would check its own context bit
and happily continue to trace.

As the preempt version is faster than the irq disable version,
there's no more reason to keep the preempt version around.
And the irq disable version still had an issue with missing
out on tracing NMI code.

Remove the irq disable function tracer version and have the
preempt disable version be the default (and only version).

Before this patch we had from running:

 # echo function > /debug/tracing/current_tracer
 # for i in `seq 10`; do ./hackbench 50; done
Time: 12.028
Time: 11.945
Time: 11.925
Time: 11.964
Time: 12.002
Time: 11.910
Time: 11.944
Time: 11.929
Time: 11.941
Time: 11.924

(average: 11.9512)

Now we have:

 # echo function > /debug/tracing/current_tracer
 # for i in `seq 10`; do ./hackbench 50; done
Time: 10.285
Time: 10.407
Time: 10.243
Time: 10.372
Time: 10.380
Time: 10.198
Time: 10.272
Time: 10.354
Time: 10.248
Time: 10.253

(average: 10.3012)

 a 13.8% savings!
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      897f68a4
    • S
      tracing: Avoid unnecessary multiple recursion checks · edc15caf
      由 Steven Rostedt 提交于 
      When function tracing occurs, the following steps are made:
  If arch does not support a ftrace feature:
   call internal function (uses INTERNAL bits) which calls...
  If callback is registered to the "global" list, the list
   function is called and recursion checks the GLOBAL bits.
   then this function calls...
  The function callback, which can use the FTRACE bits to
   check for recursion.

Now if the arch does not suppport a feature, and it calls
the global list function which calls the ftrace callback
all three of these steps will do a recursion protection.
There's no reason to do one if the previous caller already
did. The recursion that we are protecting against will
go through the same steps again.

To prevent the multiple recursion checks, if a recursion
bit is set that is higher than the MAX bit of the current
check, then we know that the check was made by the previous
caller, and we can skip the current check.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      edc15caf