Reset ssthresh to the correct value (peer's a_rwnd) when restarting
association.
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

br_fdb_get use atomic_inc to increase the refcount of an element found
on a RCU protected list, which can lead to the following race:

CPU0					CPU1

					br_fdb_get:   rcu_read_lock
					__br_fdb_get: find element
fdb_delete:   hlist_del_rcu
	      br_fdb_put
br_fdb_put:   atomic_dec_and_test
	      call_rcu(fdb_rcu_free)	br_fdb_get:   atomic_inc
						      rcu_read_unlock
fdb_rcu_free: kmem_cache_free

Use atomic_inc_not_zero instead.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

fib_rules_dump needs to use list_for_each_entry_rcu to protect against
concurrent changes to the rules list.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a space between printing of the src and dst ipv6 addresses.
Otherwise, audit or other test tools may fail to process the audit
record properly because they cannot find the dst address.
Signed-off-by: NJoy Latten <latten@austin.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes two NULL dereferences spotted by the Coverity checker.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the association has been restarted, we need to reset the
transport congestion variables as well as accumulated error
counts and CACC variables.  If we do not, the association
will use the wrong values and may terminate prematurely.

This was found with a scenario where the peer restarted
the association when lksctp was in the last HB timeout for
its association.  The restart happened, but the error counts
have not been reset and when the timeout occurred, a newly
restarted association was terminated due to excessive
retransmits.
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NSridhar Samudrala <sri@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

2960bis states (Section 8.3):

   D) Request an on-demand HEARTBEAT on a specific destination transport
      address of a given association.

   The endpoint should increment the respective error counter of the
   destination transport address each time a HEARTBEAT is sent to that
   address and not acknowledged within one RTO.
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NSridhar Samudrala <sri@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During association restart we may have stale data sitting
on the ULP queue waiting for ordering or reassembly.  This
data may cause severe problems if not cleaned up.  In particular
stale data pending ordering may cause problems with receive
window exhaustion if our peer has decided to restart the
association.
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NSridhar Samudrala <sri@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to call ppp_unregister_channel() when IrNET disconnects, and this
must be done from a process context.

Bug reported and patch tested by Guennadi Liakhovetski.
Signed-off-by: NSamuel Ortiz <samuel@sortiz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Without this initialization one gets

kernel BUG at kernel/rtmutex_common.h:80!

This patch should also be included in the -stable kernel.
Signed-off-by: NG. Liakhovetski <gl@dsa-ac.de>
Signed-off-by: NSamuel Ortiz <samuel@sortiz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With 42101001.sb firmwares, we need a 10 ms delay between firmware chunks
upload on irda-usb.

Patch from Nigel Williams <nigelw@elder-gods.net>
Signed-off-by: NSamuel Ortiz <samuel@sortiz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: store-init needs trailing membar.

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: new Novatel device ids for option driver
  USB: berry_charge: correct dbg string for second magic command
  usblp: quirk flag and device entry for Seiko Epson M129C printer
  airprime: USB ID for Novatel EV620 mini PCI-E card
  USB: necessary update for mos7720 driver
  USB: RAZR v3i unusual_devs
  USB: two more device ids for dm9601 usbnet driver
  USB: fix usb-serial regression

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Export except_vec_vi_{mori,lui,ori} as text symbols.
  [MIPS] mips-boards: More liberal check for mips-board console
  [MIPS] Misc fixes for plat_irq_dispatch functions
  [MIPS] Qemu: Fix Symmetric Uniprocessor support.
  [MIPS] VI: TRACE_IRQS_OFF clobbers $v0, so save & restore around call.

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  pata_ixp4xx_cf: fix interrupt
  pata_ixp4xx_cf: fix oops on detach
  libata: kernel-doc fix
  sata_inic162x: kill double region requests
  drivers/ata/Kconfig: PATA_SCC depends on wrong platform
  sata_sil24: Add Adaptec 1220SA PCI ID
  libata: don't whine if ->prereset() returns -ENOENT

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 4264/1: ldrex/strex syntax errors with recent compilers
  [ARM] Fix breakage caused by 72486f1f

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] zcrypt: fix possible race when unloading zcrypt driver modules
  [S390] zcrypt: fix possible dead lock in AP bus module
  [S390] Wire up sys_utimes.
  [S390] reboot from and dump to SCSI under z/VM fails.
  [S390] Wire up compat_sys_epoll_pwait.
  [S390] strlcpy is smart enough
  [S390] memory detection: fix off by one bug.
  [S390] cio: qdio slsb setup

This moves all of the Novatel device ids to the option driver, where
they belong.

Thanks to Novatel for providing a list of all supported devices.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The manual says that it is required and we actually have crash reports
where loads see stale data due to not having membars here.

In one case the networking does:

	memset(skb, 0, offsetof(struct sk_buff, truesize));

and then some code later checks skb->nohdr for zero, but it's still
the value that was there before the memset().

Note that arch/sparc64/lib/xor.S already got this right.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Otherwise objdump will screw up disassembly.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Allows overriding the MALTA/ATLAS/etc. default console setting with
non-serial console devices.
Signed-Off-By: NThiemo Seufer <ths@networkno.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 o adds missing ST0_IM masks, which caused the logging of valid interrupts
   as spurious
 o stops pnx8550 to log every interrupt as spurious
 o adds cause register masks for ip22/ip32, which caused handling of masked
   interrupts
 o removes some superfluous parentheses in the SNI interrupt code
Signed-Off-By: NThiemo Seufer <ths@networkno.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Might be useful for SMP debugging.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

[Rewritten Kconfig bits to deal better fit in the usual pattern of doing
things - Ralf]
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

I was testing the berry_charge module with my Blackberry 8700c and had
great success, thanks. Looking at the code for my own learning I noticed
the following cut and paste error... just a nit.
Signed-off-by: NKen L Johnson <ken@novell.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as872) adds a device table entry and a new quirk flag to
the usblp driver for the Seiko Epson Receipt printer.  This printer
returns Vendor-Specific values for bInterfaceClass and
bInterfaceSubClass, but the bInterfaceProtocol value is valid and it
works with usblp.  The new quirks flag tells the driver to ignore the
Class and SubClass values in the interface descriptor.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add an ID to recognise the Novatel EV620 wireless adapter.
http://www.novatelwireless.com/products/expedite/ev620.html

It looks like a mini PCI-Express adapter.  The mPCIE connector includes USB
pins... the card shows up to the system as a USB device, and powers itself
from the PCI bus.

The card I have isn't activated yet, so I can't get a PPP session up yet, but
I have tested basic serial communication successfully in both 2.6.18 and
2.6.20 kernels, once the product ID was added.  (the driver changed quite a
bit between the two revs.)  In both drivers, it responds to AT commands and
such.
Signed-off-by: NMark Glines <mark@glines.org>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

these devices have a shared interrupt endpoint. For serialcore to pass
an interrupt endpoint to a subdriver, the subdriver must define and
_export_ a fitting callback. The mos7720 driver failed to do so. This led
invariably to an oops upon open. This patch fixes it. The driver is useless
without it. Please try to get this into 2.6.21 and the stable kernels that
have this driver.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This adds an unusual_devs entry for the Motorola RAZR 3vi.

From: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch for the linux-usb-devel tree adds two more
product ids to the dm9601 driver. These ids were found on
rebadged dm9601 devices in the wild.
Signed-off-by: NJon Dowland <jon@alcopop.org>
Acked-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch reverts d9a7ecac since it
breaks drivers that need to access the ->port[] array in shutdown
(most of them).

Signed-Off: Jim Radford <radford@blackbean.org>
Acked-by: NMark Lord <mlord@pobox.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

 As per compact flash specifications, the default
 irq mode upon cf insertion is pulse mode. this patch fixes
 the driver to cope with that.
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

pata_ixp4xx_cf dodged dont-clear-drvdata-in-LLD bombing run as it used
platform_set_drvdata() instead of dev_set_drvdata().  This causes OOPS
on devres host release.  Kill it.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Warning(linux-2621-rc3g7/drivers/ata/libata-core.c:842): No description found for parameter 'unknown'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Regions are requested twice during initialization causing the second
one to fail.  This is regression introduced during iomap conversion.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

PATA_SCC depends on PPC_CELLEB. (not PPC_IBM_CELL_BLADE)
Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: NAkira Iguchi <akira2.iguchi@toshiba.co.jp>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Add Adaptec 1220SA (SIL3132) to devices claimed by sata_sil24
Patch generated against 2.6.20.2
Signed-off-by: NJamie Clark <jclark@metaparadigm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

->prereset() returns -ENOENT to tell libata that the port is empty and
reset sequencing should be stopped.  This is not an error condition.
Update ata_eh_reset() such that it sets device classes to ATA_DEV_NONE
and return success in on -ENOENT.  This makes spurious error message
go away.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Move try_module_get() call into spin protected block to prevent zcrypt
driver module unload while submitting a request to driver.
Signed-off-by: NRalph Wuerthner <rwuerthn@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

AP bus module uses bus_for_each_dev() in software interrupt context to
poll for completed requests which might cause dead locks. Solution: use
private AP device list for polling in software interrupt context.
Signed-off-by: NRalph Wuerthner <rwuerthn@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>