- 25 3月, 2009 2 次提交
-
-
由 Paulius Zaleckas 提交于
Adds support for Faraday FA526 core. This core is used at least by: Cortina Systems Gemini and Centroid family Cavium Networks ECONA family Grain Media GM8120 Pixelplus ImageARM Prolific PL-1029 Faraday IP evaluation boards v2: - move TLB_BTB to separate patch - update copyrights Signed-off-by: NPaulius Zaleckas <paulius.zaleckas@teltonika.lt>
-
由 Paulius Zaleckas 提交于
Signed-off-by: NPaulius Zaleckas <paulius.zaleckas@teltonika.lt>
-
- 24 3月, 2009 6 次提交
-
-
由 Linus Torvalds 提交于
-
由 Kyle McMartin 提交于
With a sufficiently new compiler and binutils, code which wasn't previously generating .eh_frame sections has begun to. Certain architectures (powerpc, in this case) may generate unexpected relocation formats in response to this, preventing modules from loading. While the new relocation types should probably be handled, revert to the previous behaviour with regards to generation of .eh_frame sections. (This was reported against Fedora, which appears to be the only distro doing any building against gcc-4.4 at present: RH bz#486545.) Signed-off-by: NKyle McMartin <kyle@redhat.com> Acked-by: NRoland McGrath <roland@redhat.com> Cc: Alexandre Oliva <aoliva@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jody McIntyre 提交于
Revert the change to the orphan dates of Windows 95, DOS, compression. Add a new orphan date for OS/2. Signed-off-by: NJody McIntyre <scjody@sun.com> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits) ucc_geth: Fix oops when using fixed-link support dm9000: locking bugfix net: update dnet.c for bus_id removal dnet: DNET should depend on HAS_IOMEM dca: add missing copyright/license headers nl80211: Check that function pointer != NULL before using it sungem: missing net_device_ops be2net: fix to restore vlan ids into BE2 during a IF DOWN->UP cycle be2net: replenish when posting to rx-queue is starved in out of mem conditions bas_gigaset: correctly allocate USB interrupt transfer buffer smsc911x: reset last known duplex and carrier on open sh_eth: Fix mistake of the address of SH7763 sh_eth: Change handling of IRQ netns: oops in ip[6]_frag_reasm incrementing stats net: kfree(napi->skb) => kfree_skb net: fix sctp breakage ipv6: fix display of local and remote sit endpoints net: Document /proc/sys/net/core/netdev_budget tulip: fix crash on iface up with shirq debug virtio_net: Make virtio_net support carrier detection ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix crash with /proc/iomem sparc64: Reschedule KGDB capture to a software interrupt. sbus: Auto-load openprom module when device opened.
-
由 Miklos Szeredi 提交于
This patch fixes bug #12208: Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12208 Subject : uml is very slow on 2.6.28 host This turned out to be not a scheduler regression, but an already existing problem in ptrace being triggered by subtle scheduler changes. The problem is this: - task A is ptracing task B - task B stops on a trace event - task A is woken up and preempts task B - task A calls ptrace on task B, which does ptrace_check_attach() - this calls wait_task_inactive(), which sees that task B is still on the runq - task A goes to sleep for a jiffy - ... Since UML does lots of the above sequences, those jiffies quickly add up to make it slow as hell. This patch solves this by not rescheduling in read_unlock() after ptrace_stop() has woken up the tracer. Thanks to Oleg Nesterov and Ingo Molnar for the feedback. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> CC: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 3月, 2009 11 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc: powerpc/mm: Fix Respect _PAGE_COHERENT on classic ppc32 SW TLB load machines
-
由 Kumar Gala 提交于
Grant picked up the wrong version of "Respect _PAGE_COHERENT on classic ppc32 SW" (commit a4bd6a93) It was missing the code to actually deal with the fixup of _PAGE_COHERENT based on the CPU feature. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
commit b1c4a9dd ("ucc_geth: Change uec phy id to the same format as gianfar's") introduced a regression in the ucc_geth driver that causes this oops when fixed-link is used: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0151270 Oops: Kernel access of bad area, sig: 11 [#1] TMCUTU NIP: c0151270 LR: c0151270 CTR: c0017760 REGS: cf81fa60 TRAP: 0300 Not tainted (2.6.29-rc8) MSR: 00009032 <EE,ME,IR,DR> CR: 24024042 XER: 20000000 DAR: 00000000, DSISR: 20000000 TASK = cf81cba0[1] 'swapper' THREAD: cf81e000 GPR00: c0151270 cf81fb10 cf81cba0 00000000 c0272e20 c025f354 00001e80 cf86b08c GPR08: d1068200 cffffb74 06000000 d106c200 42024042 10085148 0fffd000 0ffc81a0 GPR16: 00000001 00000001 00000000 007ffeb0 00000000 0000c000 cf83f36c cf83f000 GPR24: 00000030 cf83f360 cf81fb20 00000000 d106c200 20000000 00001e80 cf83f360 NIP [c0151270] ucc_geth_open+0x330/0x1efc LR [c0151270] ucc_geth_open+0x330/0x1efc Call Trace: [cf81fb10] [c0151270] ucc_geth_open+0x330/0x1efc (unreliable) [cf81fba0] [c0187638] dev_open+0xbc/0x12c [cf81fbc0] [c0187e38] dev_change_flags+0x8c/0x1b0 This patch fixes the issue by removing offending (and somewhat duplicate) code from init_phy() routine, and changes _probe() function to use uec_mdio_bus_name(). Also, since we fully construct phy_bus_id in the _probe() routine, we no longer need ->phy_address and ->mdio_bus fields in ucc_geth_info structure. I wish the patch would be a bit shorter, but it seems like the only way to fix the issue in a sane way. Luckily, the patch has been tested with real PHYs and fixed-link, so no further regressions expected. Reported-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Tested-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Brownell 提交于
This fixes a locking bug in the dm9000 driver. It calls request_irq() without setting IRQF_DISABLED ... which is correct for handlers that support IRQ sharing, since that behavior is not guaranteed for shared IRQs. However, its IRQ handler then wrongly assumes that IRQs are blocked. So the fix just uses the right spinlock primitives in the IRQ handler. NOTE: this is a classic example of the type of bug which lockdep currently masks by forcibly setting IRQF_DISABLED on IRQ handlers that did not request that flag. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes: kconfig: improve seed in randconfig kconfig: fix randconfig for choice blocks
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu由 Linus Torvalds 提交于
* 'fix-includes' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: merge the non-MMU and MMU versions of siginfo.h m68k: use the MMU version of unistd.h for all m68k platforms m68k: merge the non-MMU and MMU versions of signal.h m68k: merge the non-MMU and MMU versions of ptrace.h m68k: use MMU version of setup.h for both MMU and non-MMU m68k: merge the non-MMU and MMU versions of sigcontext.h m68k: merge the non-MMU and MMU versions of swab.h m68k: merge the non-MMU and MMU versions of param.h
-
由 Gertjan van Wingerde 提交于
Update all previous incarnations of my email address to the correct one. Signed-off-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tyler Hicks 提交于
If ecryptfs_encrypted_view or ecryptfs_xattr_metadata were being specified as mount options, a NULL pointer dereference of crypt_stat was possible during lookup. This patch moves the crypt_stat assignment into ecryptfs_lookup_and_interpose_lower(), ensuring that crypt_stat will not be NULL before we attempt to dereference it. Thanks to Dan Carpenter and his static analysis tool, smatch, for finding this bug. Signed-off-by: NTyler Hicks <tyhicks@linux.vnet.ibm.com> Acked-by: NDustin Kirkland <kirkland@canonical.com> Cc: Dan Carpenter <error27@gmail.com> Cc: Serge Hallyn <serue@us.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tyler Hicks 提交于
When allocating the memory used to store the eCryptfs header contents, a single, zeroed page was being allocated with get_zeroed_page(). However, the size of an eCryptfs header is either PAGE_CACHE_SIZE or ECRYPTFS_MINIMUM_HEADER_EXTENT_SIZE (8192), whichever is larger, and is stored in the file's private_data->crypt_stat->num_header_bytes_at_front field. ecryptfs_write_metadata_to_contents() was using num_header_bytes_at_front to decide how many bytes should be written to the lower filesystem for the file header. Unfortunately, at least 8K was being written from the page, despite the chance of the single, zeroed page being smaller than 8K. This resulted in random areas of kernel memory being written between the 0x1000 and 0x1FFF bytes offsets in the eCryptfs file headers if PAGE_SIZE was 4K. This patch allocates a variable number of pages, calculated with num_header_bytes_at_front, and passes the number of allocated pages along to ecryptfs_write_metadata_to_contents(). Thanks to Florian Streibelt for reporting the data leak and working with me to find the problem. 2.6.28 is the only kernel release with this vulnerability. Corresponds to CVE-2009-0787 Signed-off-by: NTyler Hicks <tyhicks@linux.vnet.ibm.com> Acked-by: NDustin Kirkland <kirkland@canonical.com> Reviewed-by: NEric Sandeen <sandeen@redhat.com> Reviewed-by: NEugene Teo <eugeneteo@kernel.sg> Cc: Greg KH <greg@kroah.com> Cc: dann frazier <dannf@dannf.org> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: Florian Streibelt <florian@f-streibelt.de> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Benjamin Herrenschmidt 提交于
This fixes a regression introduced when we switched to using the core pci_set_power_state(). The chip seems to need the state to be written over and over again until it sticks, so we do that. Note that the code is a bit blunt, without timeout, etc... but that's pretty much because I put back in there the code exactly as it used to be before the regression. I still add a call to pci_set_power_state() at the end so that ACPI gets called appropriately on x86. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: NRaymond Wooninck <tittiatcoke@gmail.com> Acked-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 3月, 2009 2 次提交
-
-
由 Ilya Yanok 提交于
Signed-off-by: NIlya Yanok <yanok@emcraft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maciej Sosnowski 提交于
In two dca files copyright and license headers are missing. This patch adds them there. Signed-off-by: NMaciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 3月, 2009 2 次提交
-
-
由 Jouni Malinen 提交于
NL80211_CMD_GET_MESH_PARAMS and NL80211_CMD_SET_MESH_PARAMS handlers did not verify whether a function pointer is NULL (not supported by the driver) before trying to call the function. The former nl80211 command is available for unprivileged users, too, so this can potentially allow normal users to kill networking (or worse..) if mac80211 is built without CONFIG_MAC80211_MESH=y. Signed-off-by: NJouni Malinen <jouni.malinen@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
- 20 3月, 2009 11 次提交
-
-
由 Stephen Hemminger 提交于
Sungem driver only got partially converted to net_device_ops. Since this could cause bugs, please push this to 2.6.29 Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
This is a patch to reconfigure vlan-ids during an i/f down/up cycle Signed-off-by: NSathya Perla <sathyap@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
This is a patch to replenish the rx-queue when it is in a starved state (due to out-of-mem conditions) Signed-off-by: NSathya Perla <sathyap@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jeff Moyer 提交于
The libaio test harness turned up a problem whereby lookup_ioctx on a bogus io context was returning the 1 valid io context from the list (harness/cases/3.p). Because of that, an extra put_iocontext was done, and when the process exited, it hit a BUG_ON in the put_iocontext macro called from exit_aio (since we expect a users count of 1 and instead get 0). The problem was introduced by "aio: make the lookup_ioctx() lockless" (commit abf137dd). Thanks to Zach for pointing out that hlist_for_each_entry_rcu will not return with a NULL tpos at the end of the loop, even if the entry was not found. Signed-off-by: NJeff Moyer <jmoyer@redhat.com> Acked-by: NZach Brown <zach.brown@oracle.com> Acked-by: NJens Axboe <jens.axboe@oracle.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Davide Libenzi 提交于
Remove a source of fput() call from inside IRQ context. Myself, like Eric, wasn't able to reproduce an fput() call from IRQ context, but Jeff said he was able to, with the attached test program. Independently from this, the bug is conceptually there, so we might be better off fixing it. This patch adds an optimization similar to the one we already do on ->ki_filp, on ->ki_eventfd. Playing with ->f_count directly is not pretty in general, but the alternative here would be to add a brand new delayed fput() infrastructure, that I'm not sure is worth it. Signed-off-by: NDavide Libenzi <davidel@xmailserver.org> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: NJeff Moyer <jmoyer@redhat.com> Cc: Zach Brown <zach.brown@oracle.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Sam Ravnborg says: "We have several architectures that plays strange games with $(CC) and $(CROSS_COMPILE). So we need to postpone any use of $(call cc-option..) until we have included the arch specific Makefile so we try with the correct $(CC) version." Requested-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git390.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] make page table upgrade work again [S390] make page table walking more robust [S390] Dont check for pfn_valid() in uaccess_pt.c [S390] ftrace/mcount: fix kernel stack backchain [S390] topology: define SD_MC_INIT to fix performance regression [S390] __div64_31 broken for CONFIG_MARCH_G5
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: fix waitqueue usage in hiddev HID: fix incorrect free in hiddev
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: Clear space_info full when adding new devices Btrfs: Fix locking around adding new space_info
-
由 Linus Torvalds 提交于
Nick Piggin noticed this (very unlikely) race between setting a page dirty and creating the buffers for it - we need to hold the mapping private_lock until we've set the page dirty bit in order to make sure that create_empty_buffers() might not build up a set of buffers without the dirty bits set when the page is dirty. I doubt anybody has ever hit this race (and it didn't solve the issue Nick was looking at), but as Nick says: "Still, it does appear to solve a real race, which we should close." Acked-by: NNick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
This makes sure that gcc doesn't try to optimize away wrapping arithmetic, which the kernel occasionally uses for overflow testing, ie things like if (ptr + offset < ptr) which technically is undefined for non-unsigned types. See http://bugzilla.kernel.org/show_bug.cgi?id=12597 for details. Not all versions of gcc support it, so we need to make it conditional (it looks like it was introduced in gcc-3.4). Reminded-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 3月, 2009 6 次提交
-
-
由 David S. Miller 提交于
-
由 Mikulas Patocka 提交于
When you compile kernel on Sparc64 with heap memory checking and type "cat /proc/iomem", you get a crash, because pointers in struct resource are uninitialized. Most code fills struct resource with zeros, so I assume that it is responsibility of the caller of request_resource to initialized it, not the responsibility of request_resource functuion. After 2.6.29 is out, there could be a check for uninitialized fields added to request_resource to avoid crashes like this. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Otherwise it might interrupt switch_to() midstream and use half-cooked register window state. Reported-by: NChris Torek <chris.torek@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Every USB transfer buffer has to be allocated individually by kmalloc. Impact: bugfix, no functional change Signed-off-by: NTilman Schmidt <tilman@imap.cc> Tested-by: NKolja Waschk <kawk@users.sourceforge.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steve Glendinning 提交于
smsc911x_phy_adjust_link is called periodically by the phy layer (as it's run in polling mode), and it only updates the hardware when it sees a change in duplex or carrier. This patch clears the last known values every time the interface is brought up, instead of only when the module is loaded. Without this patch the adjust_link function never updates the hardware after an ifconfig down; ifconfig up. On a full duplex link this causes the tx error counter to increment, even though packets are correctly transmitted, as the default MAC_CR register setting is for half duplex. The tx errors are "no carrier" errors, which should be ignored in full-duplex mode. When MAC_CR is set to "full duplex" mode they are correctly ignored by the hardware. Note that even with this patch the tx error counter can increment if packets are transmitted between "ifconfig up" and the first phy poll interval. An improved solution would use the phy interrupt with phylib, but I haven't managed to make this work 100% robustly yet. Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nobuhiro Iwamatsu 提交于
Address of SH_TSU_ADDR and ARSTR of SH7763 was wrong. This revise it. Signed-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-