Add platform driver init-code required by the aic23-alsa driver to
omap-innovator.
Signed-off-by: NMika Laitio <lamikr@cc.jyu.fi>
Signed-off-by: NTony Lindgren <tony@atomide.com>

The GPIO IRQ mask was retrieved incorrectly in cases where we have a mask
register instead of an enable register. Also we should only return the
valid bits depending on the bank size.

This fixes a bug on 1510/1610 based OMAPs where GPIO IRQs are not
delivered.
Signed-off-by: NImre Deak <imre.deak@nokia.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Fix for re-using OMAP DMA channel with different transfer parameters.
Bits in the CCR register need to be cleaned as well in some cases.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Syncing the ads7846 code with mainstream means that the Mistral support
needs to include a callback to read the pendown state.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This patch adds core support for the TI F-Sample Board (OMAP 850).
Signed-off-by: NBrian Swetland <swetland@google.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

CM_ICLKEN1_CORE bit should be 4, not 0 as noted by
Richard Woodruff.
Signed-off-by: NTony Lindgren <tony@atomide.com>

One of the recent merges from mainline removed the Amstrad Delta USB
support. This patch adds it back in; it's the same as was in
2.6.16-omap2.
Signed-off-by: NJonathan McDowell <noodles@earth.li>
Signed-off-by: NTony Lindgren <tony@atomide.com>

- The current OMAP GPIO IRQ framework doesn't use the do_edge_IRQ,
  do_level_IRQ handlers, but instead calls do_simple_IRQ. This
  doesn't handle disabled interrupts properly, so drivers will
  still get interrupts after calling disable_irq. The patch solves
  this by respecting the irq_desc.disable_depth and irq_desc.running
  counters.  When one of these is non-zero the handler is not called,
  the interrupt is masked and marked as pending. The pending interrupt
  will be serviced when the running handler returns. This is according
  to the same semantics as the standard do_edge_IRQ and do_level_IRQ
  handlers have, so one day we should use them instead of do_simple_IRQ.

- Process only interrupts that are not masked. The ISR may contain
  pending interrupts that are masked these shouldn't be processed.

- Move the bank IRQ unmasking out of the IRQ dispatch loop. If there
  are further iterations we shouldn't unmask it if there are level
  triggered interrupts pending.
Signed-off-by: NImre Deak <imre.deak@nokia.com>
Signed-off-by: NJuha Yrjola <juha.yrjola@nokia.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This adds the OSK/Mistral specific glue for the omap_uwire driver and
its ADS 7846 touchscreen.  It also moves the lcd and keypad setup so
it's grouped with the other Mistral-specific setup code, and provides
comments about which switch maps to which reported key.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NTony Lindgren <tony@atomide.com>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (56 commits)
  [PATCH] fs/ocfs2/dlm/: cleanups
  ocfs2: fix compiler warnings in dlm_convert_lock_handler()
  ocfs2: dlm_print_one_mle() needs to be defined
  ocfs2: remove whitespace in dlmunlock.c
  ocfs2: move dlm work to a private work queue
  ocfs2: fix incorrect error returns
  ocfs2: tune down some noisy messages during dlm recovery
  ocfs2: display message before waiting for recovery to complete
  ocfs2: mlog in dlm_convert_lock_handler() should be ML_ERROR
  ocfs2: retry operations when a lock is marked in recovery
  ocfs2: use cond_resched() in dlm_thread()
  ocfs2: use GFP_NOFS in some dlm operations
  ocfs2: wait for recovery when starting lock mastery
  ocfs2: continue recovery when a dead node is encountered
  ocfs2: remove unneccesary spin_unlock() in dlm_remaster_locks()
  ocfs2: dlm_remaster_locks() should never exit without completing
  ocfs2: special case recovery lock in dlmlock_remote()
  ocfs2: pending mastery asserts and migrations should block each other
  ocfs2: temporarily disable automatic lock migration
  ocfs2: do not unconditionally purge the lockres in dlmlock_remote()
  ...

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3657/1: S3C24XX: Documentation update of Overview.txt
  [ARM] Update mach-types
  [ARM] 3656/1: S3C2412: Add S3C2412 and S3C2413 documenation
  [ARM] 3654/1: add ajeco 1arm sbc support
  [ARM] fix drivers/mfd/ucb1x00-core.c IRQ probing bug
  [ARM] 3651/1: S3C24XX: Make arch list more detailed
  [ARM] 3650/1: S3C2412: Update s3c2410_defconfig
  [ARM] 3649/1: S3C24XX: Fix capitalisation of CPU on SMDK2440
  [ARM] 3612/1: make pci bus optional for ixp4xx platform
  [ARM] Remove MODE_(SVC|IRQ|FIQ|USR) and DEFAULT_FIQ
  [ARM] Remove save_lr/restore_pc macros
  [ARM] Remove partial non-v6 binutils compatibility
  [ARM] Remove LOADREGS macro
  [ARM] Remove RETINSTR macro

* master.kernel.org:/home/rmk/linux-2.6-serial:
  [SERIAL] 8250_pnp: add support for other Wacom tablets

Patch from Ben Dooks

Update the list of supported devices, and remove the
changelog. Add SMDK2413 information.--
Signed-off-by: NBen Dooks &lt;ben-linux@fluff.org&gt;Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Usual mach-types update.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch #if 0's the no longer used dlm_dump_lock_resources().

Since this makes dlmdebug.h empty, this patch also removes this header.

Additionally, the needlessly global dlm_is_node_recovered() is made
static.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

We need to cast to unsigned long long.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Fixes compile breakage.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

The work that is done can block for long periods of time and so is not
appropriate for keventd.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Use DLM_REJECTED instead of DLM_RECOVERING.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Before checking for a nonexistent lock, make sure the lockres is not marked
RECOVERING. The caller will just retry and the state should be fixed up when
recovery completes.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

yield() does not yield.  cond_resched() does.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

We cannot restart recovery. Once we begin to recover a node, keep the state
of the recovery intact and follow through, regardless of any other node
deaths that may occur.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

If the previous master of the recovery lock dies, let calc_usage take it
down completely and let the caller completely redo the dlmlock() call.
Otherwise, there will never be an opportunity to re-master the lockres and
recovery wont be able to progress.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Use the existing structure for blocking migrations when ASTs are pending to
achieve the same result. If we can catch the assert before it goes on the
wire, just cancel it and let the migration continue.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Now we never change the owner of a lock resource until unmount or node
death. This will be re-enabled once some issues in the algorithm used have
been resolved.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

In dlmlock_remote(), do not call purge_lockres until the lock resource
actually changes. otherwise, the mastery info on the lockres will go away
underneath the caller.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

When mastering non-recovery lock resources, additional time was frequently
needed to allow the disk heartbeat to catch up with the network timeout. the
recovery lock resource is time critical and avoids this path.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Recovery will spin in dlm_pre_master_reco_lockres if we do not ignore
timed-out network responses from dead nodes.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Change behavior of dlm_restart_lock_mastery() when a node goes down.  Dump
all responses that have been collected and start over.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

This is an error on the sending side, so gracefully error out on the
receiving end.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>