commit 1524f4e47f90b27a3ac84efbdd94c63172246a6f upstream.

The "chip->dsp_spos_instance" can be NULL on some of the ealier error
paths in snd_cs46xx_create().
Reported-by: N"Yavuz, Tuba" <tuba@ece.ufl.edu>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4bd46aa0353e022c2401a258e93b107880a66533 upstream.

It is reported that commit 95f408bb ("media: cx23885: Ryzen DMA
related RiSC engine stall fixes") caused regresssions with other CPUs.

Ensure that the quirk will be applied only for the CPUs that
are known to cause problems.

A module option is added for explicit control of the behaviour.

Fixes: 95f408bb ("media: cx23885: Ryzen DMA related RiSC engine stall fixes")
Signed-off-by: NBrad Love <brad@nextdimension.cc>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0ae976a11b4fb5704b597e103b5189237641c1a1 upstream.

Enable hw capabilities supported by mt76-usb layer
- fast_xmit
- tx/rx amsdu
- MFP
- non-linear tx skbs

[This is one line hw feature backport from 0ae976a11b4f ("mt76x0: init
hw capabilities"), which add also other different features, however
those are not supported in 4.19.

802.11w is supported by mac80211 and mt76x0u driver in 4.19 correctly
fall-back to software encryption when 802.11w ciphers are used.

Without the patch we fail to associate with WPA3 APs, so this is
considered as fix.]
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
[remove marking non-working features on 4.19, make topic correspond the change]
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c92a54cfa0257e8ffd66b2a17d49e9c0bd4b769f upstream.

The dma_direct_supported() function intends to check the DMA mask against
specific values. However, the phys_to_dma() function includes the SME
encryption mask, which defeats the intended purpose of the check. This
results in drivers that support less than 48-bit DMA (SME encryption mask
is bit 47) from being able to set the DMA mask successfully when SME is
active, which results in the driver failing to initialize.

Change the function used to check the mask from phys_to_dma() to
__phys_to_dma() so that the SME encryption mask is not part of the check.

Fixes: c1d0af1a ("kernel/dma/direct: take DMA offset into account in dma_direct_supported")
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e213574a449f7a57d4202c1869bbc7680b6b5521 upstream.

We cannot build these files with clang as it does not allow altivec
instructions in assembly when -msoft-float is passed.

Jinsong Ji <jji@us.ibm.com> wrote:
> We currently disable Altivec/VSX support when enabling soft-float.  So
> any usage of vector builtins will break.
>
> Enable Altivec/VSX with soft-float may need quite some clean up work, so
> I guess this is currently a limitation.
>
> Removing -msoft-float will make it work (and we are lucky that no
> floating point instructions will be generated as well).

This is a workaround until the issue is resolved in clang.

Link: https://bugs.llvm.org/show_bug.cgi?id=31177
Link: https://github.com/ClangBuiltLinux/linux/issues/239Signed-off-by: NJoel Stanley <joel@jms.id.au>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 813af51f5d30a2da6a2523c08465f9726e51772e upstream.

Clang needs to be told which target it is building for when cross
compiling.

Link: https://github.com/ClangBuiltLinux/linux/issues/259Signed-off-by: NJoel Stanley <joel@jms.id.au>
Tested-by: Daniel Axtens <dja@axtens.net> # powerpc 64-bit BE
Acked-by: NMichael Ellerman <mpe@ellerman.id.au>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3bd9805090af843b25f97ffe5049f20ade1d86d6 upstream.

The powerpc makefile will use these in it's boot wrapper.
Signed-off-by: NJoel Stanley <joel@jms.id.au>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 238bcbc4e07fad2fff99c5b157d0c37ccd4d093c upstream.

Collect basic Clang options such as --target, --prefix, --gcc-toolchain,
-no-integrated-as into a single variable CLANG_FLAGS so that it can be
easily reused in other parts of Makefile.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Tested-by: NNick Desaulniers <ndesaulniers@google.com>
Acked-by: NGreg Hackmann <ghackmann@google.com>
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit dbe27a002ef8573168cb64e181458ea23a74e2b6 upstream.

We are still a way off the Clang's integrated assembler support for
the kernel. Hence, -no-integrated-as is mandatory to build the kernel
with Clang. If you had an ancient version of Clang that does not
recognize this option, you would not be able to compile the kernel
anyway.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Tested-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit aea447141c7e7824b81b49acd1bc785506fba46e upstream.

The powerpc kernel uses setjmp which causes a warning when building
with clang:

  In file included from arch/powerpc/xmon/xmon.c:51:
  ./arch/powerpc/include/asm/setjmp.h:15:13: error: declaration of
  built-in function 'setjmp' requires inclusion of the header <setjmp.h>
        [-Werror,-Wbuiltin-requires-header]
  extern long setjmp(long *);
              ^
  ./arch/powerpc/include/asm/setjmp.h:16:13: error: declaration of
  built-in function 'longjmp' requires inclusion of the header <setjmp.h>
        [-Werror,-Wbuiltin-requires-header]
  extern void longjmp(long *, long);
              ^

This *is* the header and we're not using the built-in setjump but
rather the one in arch/powerpc/kernel/misc.S. As the compiler warning
does not make sense, it for the files where setjmp is used.
Signed-off-by: NJoel Stanley <joel@jms.id.au>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
[mpe: Move subdir-ccflags in xmon/Makefile to not clobber -Werror]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6977f95e63b9b3fb4a5973481a800dd9f48a1338 upstream.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Reviewed-by: NJoel Stanley <joel@jms.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2a056f58fd33ccc6a0261b552b0f17e7fa4a12f3 upstream.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Reviewed-by: NJoel Stanley <joel@jms.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f2910f0e6835339e6ce82cef22fa15718b7e3bfa upstream.

GCC 4.6 is the minimum supported now.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Reviewed-by: NJoel Stanley <joel@jms.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
[nc: Applied to minimize unnecessary conflicts]
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b8be5674fa9a6f3677865ea93f7803c4212f3e10 upstream.
Signed-off-by: NVasily Averin <vvs@virtuozzo.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4ecd55ea074217473f94cfee21bb72864d39f8d7 upstream.

After commit d202cce8, an expired cache_head can be removed from the
cache_detail's hash.

However, the expired cache_head may be waiting for a reply from a
previously submitted request. Such a cache_head has an increased
refcounter and therefore it won't be freed after cache_put(freeme).

Because the cache_head was removed from the hash it cannot be found
during cache_clean() and can be leaked forever, together with stalled
cache_request and other taken resources.

In our case we noticed it because an entry in the export cache was
holding a reference on a filesystem.

Fixes d202cce8 ("sunrpc: never return expired entries in sunrpc_cache_lookup")
Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Cc: stable@kernel.org # 2.6.35
Signed-off-by: NVasily Averin <vvs@virtuozzo.com>
Reviewed-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7056d3a37d2c6aaaab10c13e8e69adc67ec1fc65 upstream.

Burt Holzman has noticed that memcg v1 doesn't notify about OOM events via
eventfd anymore.  The reason is that 29ef680a ("memcg, oom: move
out_of_memory back to the charge path") has moved the oom handling back to
the charge path.  While doing so the notification was left behind in
mem_cgroup_oom_synchronize.

Fix the issue by replicating the oom hierarchy locking and the
notification.

Link: http://lkml.kernel.org/r/20181224091107.18354-1-mhocko@kernel.org
Fixes: 29ef680a ("memcg, oom: move out_of_memory back to the charge path")
Signed-off-by: NMichal Hocko <mhocko@suse.com>
Reported-by: NBurt Holzman <burt@fnal.gov>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com
Cc: <stable@vger.kernel.org>	[4.19+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7af7a8e19f0c5425ff639b0f0d2d244c2a647724 upstream.

KSM pages may be mapped to the multiple VMAs that cannot be reached from
one anon_vma.  So during swapin, a new copy of the page need to be
generated if a different anon_vma is needed, please refer to comments of
ksm_might_need_to_copy() for details.

During swapoff, unuse_vma() uses anon_vma (if available) to locate VMA and
virtual address mapped to the page, so not all mappings to a swapped out
KSM page could be found.  So in try_to_unuse(), even if the swap count of
a swap entry isn't zero, the page needs to be deleted from swap cache, so
that, in the next round a new page could be allocated and swapin for the
other mappings of the swapped out KSM page.

But this contradicts with the THP swap support.  Where the THP could be
deleted from swap cache only after the swap count of every swap entry in
the huge swap cluster backing the THP has reach 0.  So try_to_unuse() is
changed in commit e0709829 ("mm, THP, swap: support to reclaim swap
space for THP swapped out") to check that before delete a page from swap
cache, but this has broken KSM swapoff too.

Fortunately, KSM is for the normal pages only, so the original behavior
for KSM pages could be restored easily via checking PageTransCompound().
That is how this patch works.

The bug is introduced by e0709829 ("mm, THP, swap: support to reclaim
swap space for THP swapped out"), which is merged by v4.14-rc1.  So I
think we should backport the fix to from 4.14 on.  But Hugh thinks it may
be rare for the KSM pages being in the swap device when swapoff, so nobody
reports the bug so far.

Link: http://lkml.kernel.org/r/20181226051522.28442-1-ying.huang@intel.com
Fixes: e0709829 ("mm, THP, swap: support to reclaim swap space for THP swapped out")
Signed-off-by: N"Huang, Ying" <ying.huang@intel.com>
Reported-by: NHugh Dickins <hughd@google.com>
Tested-by: NHugh Dickins <hughd@google.com>
Acked-by: NHugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shaohua Li <shli@kernel.org>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 02917e9f8676207a4c577d4d94eae12bf348e9d7 upstream.

At Maintainer Summit, Greg brought up a topic I proposed around
EXPORT_SYMBOL_GPL usage.  The motivation was considerations for when
EXPORT_SYMBOL_GPL is warranted and the criteria for taking the exceptional
step of reclassifying an existing export.  Specifically, I wanted to make
the case that although the line is fuzzy and hard to specify in abstract
terms, it is nonetheless clear that devm_memremap_pages() and HMM
(Heterogeneous Memory Management) have crossed it.  The
devm_memremap_pages() facility should have been EXPORT_SYMBOL_GPL from the
beginning, and HMM as a derivative of that functionality should have
naturally picked up that designation as well.

Contrary to typical rules, the HMM infrastructure was merged upstream with
zero in-tree consumers.  There was a promise at the time that those users
would be merged "soon", but it has been over a year with no drivers
arriving.  While the Nouveau driver is about to belatedly make good on
that promise it is clear that HMM was targeted first and foremost at an
out-of-tree consumer.

HMM is derived from devm_memremap_pages(), a facility Christoph and I
spearheaded to support persistent memory.  It combines a device lifetime
model with a dynamically created 'struct page' / memmap array for any
physical address range.  It enables coordination and control of the many
code paths in the kernel built to interact with memory via 'struct page'
objects.  With HMM the integration goes even deeper by allowing device
drivers to hook and manipulate page fault and page free events.

One interpretation of when EXPORT_SYMBOL is suitable is when it is
exporting stable and generic leaf functionality.  The
devm_memremap_pages() facility continues to see expanding use cases,
peer-to-peer DMA being the most recent, with no clear end date when it
will stop attracting reworks and semantic changes.  It is not suitable to
export devm_memremap_pages() as a stable 3rd party driver API due to the
fact that it is still changing and manipulates core behavior.  Moreover,
it is not in the best interest of the long term development of the core
memory management subsystem to permit any external driver to effectively
define its own system-wide memory management policies with no
encouragement to engage with upstream.

I am also concerned that HMM was designed in a way to minimize further
engagement with the core-MM.  That, with these hooks in place,
device-drivers are free to implement their own policies without much
consideration for whether and how the core-MM could grow to meet that
need.  Going forward not only should HMM be EXPORT_SYMBOL_GPL, but the
core-MM should be allowed the opportunity and stimulus to change and
address these new use cases as first class functionality.

Original changelog:

hmm_devmem_add(), and hmm_devmem_add_resource() duplicated
devm_memremap_pages() and are now simple now wrappers around the core
facility to inject a dev_pagemap instance into the global pgmap_radix and
hook page-idle events.  The devm_memremap_pages() interface is base
infrastructure for HMM.  HMM has more and deeper ties into the kernel
memory management implementation than base ZONE_DEVICE which is itself a
EXPORT_SYMBOL_GPL facility.

Originally, the HMM page structure creation routines copied the
devm_memremap_pages() code and reused ZONE_DEVICE.  A cleanup to unify the
implementations was discussed during the initial review:
http://lkml.iu.edu/hypermail/linux/kernel/1701.2/00812.html Recent work to
extend devm_memremap_pages() for the peer-to-peer-DMA facility enabled
this cleanup to move forward.

In addition to the integration with devm_memremap_pages() HMM depends on
other GPL-only symbols:

    mmu_notifier_unregister_no_release
    percpu_ref
    region_intersects
    __class_create

It goes further to consume / indirectly expose functionality that is not
exported to any other driver:

    alloc_pages_vma
    walk_page_range

HMM is derived from devm_memremap_pages(), and extends deep core-kernel
fundamentals. Similar to devm_memremap_pages(), mark its entry points
EXPORT_SYMBOL_GPL().

[logang@deltatee.com: PCI/P2PDMA: match interface changes to devm_memremap_pages()]
  Link: http://lkml.kernel.org/r/20181130225911.2900-1-logang@deltatee.com
Link: http://lkml.kernel.org/r/154275560565.76910.15919297436557795278.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Balbir Singh <bsingharora@gmail.com>,
Cc: Michal Hocko <mhocko@suse.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 58ef15b765af0d2cbe6799ec564f1dc485010ab8 upstream.

devm semantics arrange for resources to be torn down when
device-driver-probe fails or when device-driver-release completes.
Similar to devm_memremap_pages() there is no need to support an explicit
remove operation when the users properly adhere to devm semantics.

Note that devm_kzalloc() automatically handles allocating node-local
memory.

Link: http://lkml.kernel.org/r/154275559545.76910.9186690723515469051.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: NDan Williams <dan.j.williams@intel.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJérôme Glisse <jglisse@redhat.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 69324b8f48339de2f90fdf2f774687fc6c47629a upstream.

In preparation for consolidating all ZONE_DEVICE enabling via
devm_memremap_pages(), teach it how to handle the constraints of
MEMORY_DEVICE_PRIVATE ranges.

[jglisse@redhat.com: call move_pfn_range_to_zone for MEMORY_DEVICE_PRIVATE]
Link: http://lkml.kernel.org/r/154275559036.76910.12434636179931292607.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: NDan Williams <dan.j.williams@intel.com>
Reviewed-by: NJérôme Glisse <jglisse@redhat.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Reported-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NLogan Gunthorpe <logang@deltatee.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a95c90f1e2c253b280385ecf3d4ebfe476926b28 upstream.

The last step before devm_memremap_pages() returns success is to allocate
a release action, devm_memremap_pages_release(), to tear the entire setup
down.  However, the result from devm_add_action() is not checked.

Checking the error from devm_add_action() is not enough.  The api
currently relies on the fact that the percpu_ref it is using is killed by
the time the devm_memremap_pages_release() is run.  Rather than continue
this awkward situation, offload the responsibility of killing the
percpu_ref to devm_memremap_pages_release() directly.  This allows
devm_memremap_pages() to do the right thing relative to init failures and
shutdown.

Without this change we could fail to register the teardown of
devm_memremap_pages().  The likelihood of hitting this failure is tiny as
small memory allocations almost always succeed.  However, the impact of
the failure is large given any future reconfiguration, or disable/enable,
of an nvdimm namespace will fail forever as subsequent calls to
devm_memremap_pages() will fail to setup the pgmap_radix since there will
be stale entries for the physical address range.

An argument could be made to require that the ->kill() operation be set in
the @pgmap arg rather than passed in separately.  However, it helps code
readability, tracking the lifetime of a given instance, to be able to grep
the kill routine directly at the devm_memremap_pages() call site.

Link: http://lkml.kernel.org/r/154275558526.76910.7535251937849268605.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: NDan Williams <dan.j.williams@intel.com>
Fixes: e8d51348 ("memremap: change devm_memremap_pages interface...")
Reviewed-by: N"Jérôme Glisse" <jglisse@redhat.com>
Reported-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 06489cfbd915ff36c8e36df27f1c2dc60f97ca56 upstream.

Given the fact that devm_memremap_pages() requires a percpu_ref that is
torn down by devm_memremap_pages_release() the current support for mapping
RAM is broken.

Support for remapping "System RAM" has been broken since the beginning and
there is no existing user of this this code path, so just kill the support
and make it an explicit error.

This cleanup also simplifies a follow-on patch to fix the error path when
setting a devm release action for devm_memremap_pages_release() fails.

Link: http://lkml.kernel.org/r/154275557997.76910.14689813630968180480.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: NDan Williams <dan.j.williams@intel.com>
Reviewed-by: N"Jérôme Glisse" <jglisse@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NLogan Gunthorpe <logang@deltatee.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 808153e1187fa77ac7d7dad261ff476888dcf398 upstream.

devm_memremap_pages() is a facility that can create struct page entries
for any arbitrary range and give drivers the ability to subvert core
aspects of page management.

Specifically the facility is tightly integrated with the kernel's memory
hotplug functionality.  It injects an altmap argument deep into the
architecture specific vmemmap implementation to allow allocating from
specific reserved pages, and it has Linux specific assumptions about page
structure reference counting relative to get_user_pages() and
get_user_pages_fast().  It was an oversight and a mistake that this was
not marked EXPORT_SYMBOL_GPL from the outset.

Again, devm_memremap_pagex() exposes and relies upon core kernel internal
assumptions and will continue to evolve along with 'struct page', memory
hotplug, and support for new memory types / topologies.  Only an in-kernel
GPL-only driver is expected to keep up with this ongoing evolution.  This
interface, and functionality derived from this interface, is not suitable
for kernel-external drivers.

Link: http://lkml.kernel.org/r/154275557457.76910.16923571232582744134.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: NDan Williams <dan.j.williams@intel.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b15c87263a69272423771118c653e9a1d0672caa upstream.

We have received a bug report that an injected MCE about faulty memory
prevents memory offline to succeed on 4.4 base kernel.  The underlying
reason was that the HWPoison page has an elevated reference count and the
migration keeps failing.  There are two problems with that.  First of all
it is dubious to migrate the poisoned page because we know that accessing
that memory is possible to fail.  Secondly it doesn't make any sense to
migrate a potentially broken content and preserve the memory corruption
over to a new location.

Oscar has found out that 4.4 and the current upstream kernels behave
slightly differently with his simply testcase

===

int main(void)
{
        int ret;
        int i;
        int fd;
        char *array = malloc(4096);
        char *array_locked = malloc(4096);

        fd = open("/tmp/data", O_RDONLY);
        read(fd, array, 4095);

        for (i = 0; i < 4096; i++)
                array_locked[i] = 'd';

        ret = mlock((void *)PAGE_ALIGN((unsigned long)array_locked), sizeof(array_locked));
        if (ret)
                perror("mlock");

        sleep (20);

        ret = madvise((void *)PAGE_ALIGN((unsigned long)array_locked), 4096, MADV_HWPOISON);
        if (ret)
                perror("madvise");

        for (i = 0; i < 4096; i++)
                array_locked[i] = 'd';

        return 0;
}
===

+ offline this memory.

In 4.4 kernels he saw the hwpoisoned page to be returned back to the LRU
list
kernel:  [<ffffffff81019ac9>] dump_trace+0x59/0x340
kernel:  [<ffffffff81019e9a>] show_stack_log_lvl+0xea/0x170
kernel:  [<ffffffff8101ac71>] show_stack+0x21/0x40
kernel:  [<ffffffff8132bb90>] dump_stack+0x5c/0x7c
kernel:  [<ffffffff810815a1>] warn_slowpath_common+0x81/0xb0
kernel:  [<ffffffff811a275c>] __pagevec_lru_add_fn+0x14c/0x160
kernel:  [<ffffffff811a2eed>] pagevec_lru_move_fn+0xad/0x100
kernel:  [<ffffffff811a334c>] __lru_cache_add+0x6c/0xb0
kernel:  [<ffffffff81195236>] add_to_page_cache_lru+0x46/0x70
kernel:  [<ffffffffa02b4373>] extent_readpages+0xc3/0x1a0 [btrfs]
kernel:  [<ffffffff811a16d7>] __do_page_cache_readahead+0x177/0x200
kernel:  [<ffffffff811a18c8>] ondemand_readahead+0x168/0x2a0
kernel:  [<ffffffff8119673f>] generic_file_read_iter+0x41f/0x660
kernel:  [<ffffffff8120e50d>] __vfs_read+0xcd/0x140
kernel:  [<ffffffff8120e9ea>] vfs_read+0x7a/0x120
kernel:  [<ffffffff8121404b>] kernel_read+0x3b/0x50
kernel:  [<ffffffff81215c80>] do_execveat_common.isra.29+0x490/0x6f0
kernel:  [<ffffffff81215f08>] do_execve+0x28/0x30
kernel:  [<ffffffff81095ddb>] call_usermodehelper_exec_async+0xfb/0x130
kernel:  [<ffffffff8161c045>] ret_from_fork+0x55/0x80

And that latter confuses the hotremove path because an LRU page is
attempted to be migrated and that fails due to an elevated reference
count.  It is quite possible that the reuse of the HWPoisoned page is some
kind of fixed race condition but I am not really sure about that.

With the upstream kernel the failure is slightly different.  The page
doesn't seem to have LRU bit set but isolate_movable_page simply fails and
do_migrate_range simply puts all the isolated pages back to LRU and
therefore no progress is made and scan_movable_pages finds same set of
pages over and over again.

Fix both cases by explicitly checking HWPoisoned pages before we even try
to get reference on the page, try to unmap it if it is still mapped.  As
explained by Naoya:

: Hwpoison code never unmapped those for no big reason because
: Ksm pages never dominate memory, so we simply didn't have strong
: motivation to save the pages.

Also put WARN_ON(PageLRU) in case there is a race and we can hit LRU
HWPoison pages which shouldn't happen but I couldn't convince myself about
that.  Naoya has noted the following:

: Theoretically no such gurantee, because try_to_unmap() doesn't have a
: guarantee of success and then memory_failure() returns immediately
: when hwpoison_user_mappings fails.
: Or the following code (comes after hwpoison_user_mappings block) also impli=
: es
: that the target page can still have PageLRU flag.
:
:         /*
:          * Torn down by someone else?
:          */
:         if (PageLRU(p) && !PageSwapCache(p) && p->mapping =3D=3D NULL) {
:                 action_result(pfn, MF_MSG_TRUNCATED_LRU, MF_IGNORED);
:                 res =3D -EBUSY;
:                 goto out;
:         }
:
: So I think it's OK to keep "if (WARN_ON(PageLRU(page)))" block in
: current version of your patch.

Link: http://lkml.kernel.org/r/20181206120135.14079-1-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NOscar Salvador <osalvador@suse.com>
Debugged-by: NOscar Salvador <osalvador@suse.com>
Tested-by: NOscar Salvador <osalvador@suse.com>
Acked-by: NDavid Hildenbrand <david@redhat.com>
Acked-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5547932dc67a48713eece4fa4703bfdf0cfcb818 upstream.

If blkdev_get fails, we shouldn't do blkdev_put.  Otherwise, kernel emits
below log.  This patch fixes it.

  WARNING: CPU: 0 PID: 1893 at fs/block_dev.c:1828 blkdev_put+0x105/0x120
  Modules linked in:
  CPU: 0 PID: 1893 Comm: swapoff Not tainted 4.19.0+ #453
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
  RIP: 0010:blkdev_put+0x105/0x120
  Call Trace:
    __x64_sys_swapoff+0x46d/0x490
    do_syscall_64+0x5a/0x190
    entry_SYSCALL_64_after_hwframe+0x49/0xbe
  irq event stamp: 4466
  hardirqs last  enabled at (4465):  __free_pages_ok+0x1e3/0x490
  hardirqs last disabled at (4466):  trace_hardirqs_off_thunk+0x1a/0x1c
  softirqs last  enabled at (3420):  __do_softirq+0x333/0x446
  softirqs last disabled at (3407):  irq_exit+0xd1/0xe0

Link: http://lkml.kernel.org/r/20181127055429.251614-3-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: NJoey Pabalinas <joeypabalinas@gmail.com>
Cc: <stable@vger.kernel.org>	[4.14+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7b55851367136b1efd84d98fea81ba57a98304cf upstream.

This changes the fork(2) syscall to record the process start_time after
initializing the basic task structure but still before making the new
process visible to user-space.

Technically, we could record the start_time anytime during fork(2).  But
this might lead to scenarios where a start_time is recorded long before
a process becomes visible to user-space.  For instance, with
userfaultfd(2) and TLS, user-space can delay the execution of fork(2)
for an indefinite amount of time (and will, if this causes network
access, or similar).

By recording the start_time late, it much closer reflects the point in
time where the process becomes live and can be observed by other
processes.

Lastly, this makes it much harder for user-space to predict and control
the start_time they get assigned.  Previously, user-space could fork a
process and stall it in copy_thread_tls() before its pid is allocated,
but after its start_time is recorded.  This can be misused to later-on
cycle through PIDs and resume the stalled fork(2) yielding a process
that has the same pid and start_time as a process that existed before.
This can be used to circumvent security systems that identify processes
by their pid+start_time combination.

Even though user-space was always aware that start_time recording is
flaky (but several projects are known to still rely on start_time-based
identification), changing the start_time to be recorded late will help
mitigate existing attacks and make it much harder for user-space to
control the start_time a process gets assigned.
Reported-by: NJann Horn <jannh@google.com>
Signed-off-by: NTom Gundersen <teg@jklm.no>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4e87eb2f46ea547d12a276b2e696ab934d16cfb6 upstream.

Certain older adapters such as the OneConnect OCe10100 may not have a valid
wqpcnt value.  In this case, do not set queue->page_count to 0 in
lpfc_sli4_queue_alloc() as this will prevent the driver from initializing.

Fixes: 895427bd ("scsi: lpfc: NVME Initiator: Base modifications")
Cc: stable@vger.kernel.org # 4.11+
Signed-off-by: NEwan D. Milne <emilne@redhat.com>
Reviewed-by: NLaurence Oberman <loberman@redhat.com>
Tested-by: NLaurence Oberman <loberman@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 60a161b7e5b2a252ff0d4c622266a7d8da1120ce upstream.

Suppose adapter (open) recovery is between opened QDIO queues and before
(the end of) initial posting of status read buffers (SRBs). This time
window can be seconds long due to FSF_PROT_HOST_CONNECTION_INITIALIZING
causing by design looping with exponential increase sleeps in the function
performing exchange config data during recovery
[zfcp_erp_adapter_strat_fsf_xconf()]. Recovery triggered by local link up.

Suppose an event occurs for which the FCP channel would send an unsolicited
notification to zfcp by means of a previously posted SRB.  We saw it with
local cable pull (link down) in multi-initiator zoning with multiple
NPIV-enabled subchannels of the same shared FCP channel.

As soon as zfcp_erp_adapter_strategy_open_fsf() starts posting the initial
status read buffers from within the adapter's ERP thread, the channel does
send an unsolicited notification.

Since v2.6.27 commit d26ab06e ("[SCSI] zfcp: receiving an unsolicted
status can lead to I/O stall"), zfcp_fsf_status_read_handler() schedules
adapter->stat_work to re-fill the just consumed SRB from a work item.

Now the ERP thread and the work item post SRBs in parallel.  Both contexts
call the helper function zfcp_status_read_refill().  The tracking of
missing (to be posted / re-filled) SRBs is not thread-safe due to separate
atomic_read() and atomic_dec(), in order to depend on posting
success. Hence, both contexts can see
atomic_read(&adapter->stat_miss) == 1. One of the two contexts posts
one too many SRB. Zfcp gets QDIO_ERROR_SLSB_STATE on the output queue
(trace tag "qdireq1") leading to zfcp_erp_adapter_shutdown() in
zfcp_qdio_handler_error().

An obvious and seemingly clean fix would be to schedule stat_work from the
ERP thread and wait for it to finish. This would serialize all SRB
re-fills. However, we already have another work item wait on the ERP
thread: adapter->scan_work runs zfcp_fc_scan_ports() which calls
zfcp_fc_eval_gpn_ft(). The latter calls zfcp_erp_wait() to wait for all the
open port recoveries during zfcp auto port scan, but in fact it waits for
any pending recovery including an adapter recovery. This approach leads to
a deadlock.  [see also v3.19 commit 18f87a67 ("zfcp: auto port scan
resiliency"); v2.6.37 commit d3e1088d
("[SCSI] zfcp: No ERP escalation on gpn_ft eval");
v2.6.28 commit fca55b6f
("[SCSI] zfcp: fix deadlock between wq triggered port scan and ERP")
fixing v2.6.27 commit c57a39a4
("[SCSI] zfcp: wait until adapter is finished with ERP during auto-port");
v2.6.27 commit cc8c2829
("[SCSI] zfcp: Automatically attach remote ports")]

Instead make the accounting of missing SRBs atomic for parallel execution
in both the ERP thread and adapter->stat_work.
Signed-off-by: NSteffen Maier <maier@linux.ibm.com>
Fixes: d26ab06e ("[SCSI] zfcp: receiving an unsolicted status can lead to I/O stall")
Cc: <stable@vger.kernel.org> #2.6.27+
Reviewed-by: NJens Remus <jremus@linux.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 9bc30ab82108e6a34dc63bf956b49edf71b1681a ]

The x/y command parsing has been broken since commit 12995706
("staging: panel: Fixed checkpatch warning about simple_strtoul()").

Commit b34050fa ("auxdisplay: charlcd: Fix and clean up handling of
x/y commands") fixed some problems by rewriting the parsing code,
but also broke things further by removing the check for a complete
command before attempting to parse it.  As a result, parsing is
terminated at the first x or y character.

This reinstates the check for a final semicolon.  Whereas the original
code use strchr(), this is wasteful seeing as the semicolon is always
at the end of the buffer.  Thus check this character directly instead.
Signed-off-by: NMans Rullgard <mans@mansr.com>
Signed-off-by: NMiguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d430aff8cd0c57502d873909c184e3b5753f8b88 ]

The function of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.

su_get_type() doesn't do that. The match node are used as an identifier
to compare against the current node, so we can directly drop the refcount
after getting the node from the path as it is not used as pointer.

Fix this by use a single variable and drop the refcount right after
of_find_node_by_path().
Signed-off-by: NYangtao Li <tiny.windzz@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d667044f49513d55fcfefe4fa8f8d96091782901 ]

This patch fixes qmap header retrieval when modem is configured for
dl data aggregation.
Signed-off-by: NDaniele Palmas <dnlplm@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d134e486e831defd26130770181f01dfc6195f7d ]

When netxen_rom_fast_read() fails, "bios" is left uninitialized and may
contain random value, thus should not be used.

The fix ensures that if netxen_rom_fast_read() fails, we return "-EIO".
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7a71712293ba303aad928f580b89addb0be2892e ]

dmesg reports that "Your touchpad (PNP: SYN3052 SYN0100 SYN0002 PNP0f13)
says it can support a different bus."

I've tested the offered psmouse.synaptics_intertouch=1 with 4.18.x and
4.19.x and it seems to work well. No problems seen with suspend/resume.

Also, it appears that RMI/SMBus mode is actually required for 3-4 finger
multitouch gestures to work -- otherwise they are not reported at all.

Information from dmesg in both modes:

  psmouse serio3: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1,
      caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3139, fw id: 2000742

  psmouse serio3: synaptics: Trying to set up SMBus access
  rmi4_smbus 6-002c: registering SMbus-connected sensor
  rmi4_f01 rmi4-00.fn01: found RMI device,
      manufacturer: Synaptics, product: TM3139-001, fw id: 2000742
Signed-off-by: NMantas Mikulėnas <grawity@gmail.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c8da642d41a6811c21177c9994aa7dc35be67d46 ]

The gpio IP on Armada 370 at offset 0x18180 has neither a clk nor pwm
registers. So there is no need for a clk as the pwm isn't used anyhow.
So only check for the clk in the presence of the pwm registers. This fixes
a failure to probe the gpio driver for the above mentioned gpio device.

Fixes: 757642f9 ("gpio: mvebu: Add limited PWM support")
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: NGregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e0e587878f538c9e3400219b6c516b8199dc2042 ]

The MAC Reset was noticed to erase important EEPROM settings.
It is also unnecessary since a chip wide reset was done earlier
in initialization, and that reset preserves EEPROM settings.

There for this patch removes the unnecessary MAC specific reset.
Signed-off-by: NBryan Whitehead <Bryan.Whitehead@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c5c08bed843c2b2c048c16d1296d7631d7c1620e ]

Fixes: d3849953 ("fs: decouple READ and WRITE from the block layer ops")
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit bed1369f51901b17108a4bb4f7210aab183bea42 ]

When running the kernel in Fast RAM on Atari:

    Ignoring memory chunk at 0x0:0xe00000 before the first chunk
    ...
    Unable to handle kernel NULL pointer dereference at virtual address (ptrval)
    Oops: 00000000
    Modules linked in:
    PC: [<0069dbac>] free_all_bootmem+0x12c/0x186
    SR: 2714  SP: (ptrval)  a2: 005e3314
    d0: 00000000    d1: 0000000a    d2: 00000e00    d3: 00000000
    d4: 005e1fc0    d5: 0000001a    a0: 01000000    a1: 00000000
    Process swapper (pid: 0, task=(ptrval))
    Frame format=7 eff addr=00000736 ssw=0505 faddr=00000736
    wb 1 stat/addr/data: 0000 00000000 00000000
    wb 2 stat/addr/data: 0000 00000000 00000000
    wb 3 stat/addr/data: 0000 00000736 00000000
    push data: 00000000 00000000 00000000 00000000
    Stack from 005e1f84:
            00000000 0000000a 027d3260 006b5006 00000000 00000000 00000000 00000000
            0004f062 0003a220 0069e272 005e1ff8 0000054c 00000000 00e00000 00000000
            00000001 00693cd8 027d3260 0004f062 0003a220 00691be6 00000000 00000000
            00000000 00000000 00000000 00000000 006b5006 00000000 00690872
    Call Trace: [<0004f062>] printk+0x0/0x18
     [<0003a220>] parse_args+0x0/0x2d4
     [<0069e272>] memblock_virt_alloc_try_nid+0x0/0xa4
     [<00693cd8>] mem_init+0xa/0x5c
     [<0004f062>] printk+0x0/0x18
     [<0003a220>] parse_args+0x0/0x2d4
     [<00691be6>] start_kernel+0x1ca/0x462
     [<00690872>] _sinittext+0x872/0x11f8
    Code: 7a1a eaae 2270 6db0 0061 ef14 2f01 2f03 <96a9> 0736 2203 e589 d681 e78b d6a9 0732 2f03 2f40 0034 4eb9 0069 b8d0 260e 4fef
    Disabling lock debugging due to kernel taint
    Kernel panic - not syncing: Attempted to kill the idle task!

As the kernel must run in the memory chunk with the lowest address,
ST-RAM is ignored, and removed from the m68k_memory[] array.
However, it is not removed from memblock, causing a crash later.

More investigation shows that there are 3 places where memory chunks are
ignored, all after the calls to memblock_add() in m68k_parse_bootinfo(),
and thus causing crashes:
  1. On classic m68k CPUs with a MMU, paging_init() ignores all memory
     chunks below the first chunk, cfr. above,
  2. On Amigas equipped with a Zorro III bus, config_amiga() ignores all
     Zorro II memory,
  3. If CONFIG_SINGLE_MEMORY_CHUNK=y, m68k_parse_bootinfo() ignores all
     but the first memory chunk.

Fix this by moving the calls to memblock_add() from
m68k_parse_bootinfo() to paging_init(), after all ignored memory chunks
have been removed from m68k_memory[].
Reported-by: NAndreas Schwab <schwab@linux-m68k.org>
Fixes: 1008a115 ("m68k: switch to MEMBLOCK + NO_BOOTMEM")
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ef7cfd00b2caf6edeb7f169682b64be2d0a798cf ]

For the same reason as commit 25896d073d8a ("x86/build: Fix compiler
support check for CONFIG_RETPOLINE"), you cannot put this $(error ...)
into the parse stage of the top Makefile.

Perhaps I'd propose a more sophisticated solution later, but this is
the best I can do for now.

Link: https://lkml.org/lkml/2017/12/25/211Reported-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Reported-by: NBernd Edlinger <bernd.edlinger@hotmail.de>
Reported-by: NQian Cai <cai@lca.pw>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: NQian Cai <cai@lca.pw>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 34b1e0e9efe101822e83cc62d22443ed3867ae7a ]

mac80211 uses the frag list to build AMSDU. When freeing
the skb, it may not be really freed, since someone is still
holding a reference to it.
In that case, when TCP skb is being retransmitted, the
pointer to the frag list is being reused, while the data
in there is no longer valid.
Since we will never get frag list from the network stack,
as mac80211 doesn't advertise the capability, we can safely
free and nullify it before releasing the SKB.
Signed-off-by: NSara Sharon <sara.sharon@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d350a0f431189517b1af0dbbb605c273231a8966 ]

If validate_pae_over_nl80211() were to fail in nl80211_crypto_settings(),
we might leak the 'connkeys' allocation. Fix this.

Fixes: 64bf3d4b ("nl80211: Add CONTROL_PORT_OVER_NL80211 attribute")
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>