- 16 10月, 2007 1 次提交
-
-
由 Takashi Iwai 提交于
Added a hwdep interface for each codec (enabled per kconfig). This interface can be used for reading/writing HD-audio verbs and other purposes as future extensions. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 20 7月, 2007 2 次提交
-
-
由 Takashi Iwai 提交于
A few PCI drivers like ALS4000 and CS5530 require the SB16-codes. This patch fixes / improves the dependency between SB modules and PCI drivers. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Add support for Cyrix/NatSemi Geode SC5530 (VSA1). The driver is snd-cs5530. Signed-off-by Ash Willis <ashwillis@programmer.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 11 5月, 2007 4 次提交
-
-
由 Clemens Ladisch 提交于
Since request_firmware() is no longer used when the internal firmware images are used, it is no longer necessary to depend on FW_LOADER in this case. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Clemens Ladisch 提交于
The external firmware files are not in the alsa-plugins but in the alsa-firmware package. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Clemens Ladisch 提交于
Move the FW_LOADER dependencies out of the *_FIRMWARE_IN_KERNEL entries because these drivers use the firmware loader regardless of whether there is an in-kernel firmware image. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Some drivers are already ifdefs for enabling external firmwares but not defined in Kconfig. Now they appear as the kernel configs. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 09 2月, 2007 5 次提交
-
-
由 Clemens Ladisch 提交于
Load the ASSP codes using request_firmware(), if possible, instead of using the built-in blobs. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Clemens Ladisch 提交于
Load the DSP code using request_firmware(), if possible, instead of using the built-in blob. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Clemens Ladisch 提交于
Load the DSP and controller microcode using request_firmware(), if possible, instead of using the built-in firmware. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Clemens Ladisch 提交于
Let the emu10k1 driver select FW_LOADER because the new Emu1010 support requires it. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Clemens Ladisch 提交于
Let the AudioScience, Echoaudio and Riptide drivers select FW_LOADER instead of depending on it so that they can be configured without having to enable FW_LOADER manually. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 23 9月, 2006 2 次提交
-
-
由 Takashi Iwai 提交于
Moved the entry of CONFIG_SND_AC97_POWER_SAVE from drivers/Kconfig to more appropriate place, pci/Kconfig. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fixed the missing selection of CONFIG_VIDEO_DEV from SND_FM801_TEA575X. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 09 8月, 2006 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
TVMixer and FM801 Tea5757 are still using V4L1 API. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 13 7月, 2006 2 次提交
-
-
由 Jaroslav Kysela 提交于
Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Adrian Bunk 提交于
CONFIG_SND_FM801=y, CONFIG_SND_FM801_TEA575X=m resulted in the following compile error: <-- snip --> ... LD vmlinux sound/built-in.o: In function 'snd_fm801_free': fm801.c:(.text+0x3c15b): undefined reference to 'snd_tea575x_exit' sound/built-in.o: In function 'snd_card_fm801_probe': fm801.c:(.text+0x3cfde): undefined reference to 'snd_tea575x_init' make: *** [vmlinux] Error 1 <-- snip --> This patch fixes kernel Bugzilla #6458. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 29 6月, 2006 2 次提交
-
-
由 Giuliano Pochini 提交于
From: Giuliano Pochini <pochini@shiny.it>Add echoaudio sound drivers (darla20, darla24, echo3g, gina20, gina24, indigo, indigodj, indigoio, layla20, lala24, mia, mona) Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Removed CONFIG_EXPERIMENTAL from intel8x0m driver. The driver has been working well without problems. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 23 6月, 2006 1 次提交
-
-
由 Jaya Kumar 提交于
Appended is my patch adding PM support to the cs5535audio driver. I also added the ac97 quirk but it's not yet confirmed which boards need to be in the quirk list. The patch also includes some Kconfig and misc cleanup. Signed-off-by: NJaya Kumar <jayakumar.alsa@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 31 3月, 2006 3 次提交
-
-
由 Ash Willis 提交于
Added snd-als300 driver for Avance Logic ALS300/ALS300+ soundcards by Ash Willis. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Peter Gruber 提交于
Add snd-riptide driver for Conexant Riptide chip by Peter Gruber. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Removed from CONFIG_EXPERIMENTAL from CONFIG_SND_CS46XX_NEW_DSP, and make default to yes. This option works fine for years. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 1月, 2006 3 次提交
-
-
由 Markus Bollinger 提交于
Modules: Documentation,PCI drivers,Digigram PCXHR driver Add Digigram PCXHR driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: ISA,PCI drivers Sort Kconfig entries in alphabetical order. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jaya Kumar 提交于
Add support for the CS5535 Audio device. I've fixed up some errors as per Takashi's advice from the thread: http://lkml.org/lkml/2005/9/15/119 From: Alan Cox <alan@lxorguk.ukuu.org.uk> cs5535 is a 32bit x86 only device using weird CPU features Signed-off-by: NJaya Kumar <jayakumar.alsa@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 11月, 2005 2 次提交
-
-
由 James Courtier-Dutton 提交于
Modules: PCI drivers,CA0106 driver Author: Tilman Kranz <tilde@tk-sls.de> Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>
-
由 Randy Dunlap 提交于
Modules: Sound Core,PCI drivers AC97 Kconfig entries broke the ALSA device drivers menu, so move them to a location where that won't happen, enabling all device sub-menus to be presented together. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 9月, 2005 1 次提交
-
-
由 Clemens Ladisch 提交于
PCI drivers,AD1889 driver move the AD1889 driver to the kernel tree Acked-by: NThibaut Varene <varenet@parisc-linux.org> Acked-by: NKyle McMartin <kyle@parisc-linux.org> Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
- 30 8月, 2005 1 次提交
-
-
由 Liam Girdwood 提交于
AC97 Codec,PCI drivers I've made the review changes and as requested I've pasted the RFC by Nicolas below:- 'I would like to know what people think of the following patch. It allows for a codec on an AC97 bus to be shared with other drivers which are completely unrelated to audio. It registers a new bus type, and whenever a codec instance is created then a device for it is also registered with the driver model using that bus type. This allows, for example, to use the extra features of the UCB1400 like the touchscreen interface and the additional GPIOs and ADCs available on that chip for battery monitoring. I have a working UCB1400 touchscreen driver here that simply registers with the driver model happily working alongside with audio features using this.' Changes over RFC:- o Now matches codec name within codec group. o Added ac97_dev_release() to stop kernel complaining about no release method for device. o Added 'config SND_AC97_BUS' to sound/pci/Kconfig and moved 'config SND_AC97_CODEC' out with the PCI=n statement. o module is now called snd-ac97-bus Signed-off-by: NLiam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 24 8月, 2005 1 次提交
-
-
由 Al Viro 提交于
fixed kconfig dependencies on ISA_DMA_API for parts of sound/* that rely on it. Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 22 6月, 2005 1 次提交
-
-
由 Takashi Iwai 提交于
HDSPM driver,PCI drivers,RME9652 driver Added RME Hammerfall DSP MADI driver by Winfried Ritsch. (Moved from alsa-driver tree to mainline.) Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-