- 07 6月, 2017 12 次提交
-
-
由 Ville Syrjälä 提交于
Restore the lost has_fbc flag for mobile ILK. Cc: Carlos Santa <carlos.santa@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Fixes: a1323380 ("drm/i915: Introduce GEN5_FEATURES for device info") Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170606133229.12439-1-ville.syrjala@linux.intel.comReviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit c2d1a0ce) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Ville Syrjälä 提交于
The scanline counter is bonkers on VLV/CHV DSI. The scanline counter increment is not lined up with the start of vblank like it is on every other platform and output type. This causes problems for both the vblank timestamping and atomic update vblank evasion. On my FFRD8 machine at least, the scanline counter increment happens about 1/3 of a scanline ahead of the start of vblank (which is where all register latching happens still). That means we can't trust the scanline counter to tell us whether we're in vblank or not while we're on that particular line. In order to keep vblank timestamping in working condition when called from the vblank irq, we'll leave scanline_offset at one, which means that the entire line containing the start of vblank is considered to be inside the vblank. For the vblank evasion we'll need to consider that entire line to be bad, since we can't tell whether the registers already got latched or not. And we can't actually use the start of vblank interrupt to get us past that line as the interrupt would fire too soon, and then we'd up waiting for the next start of vblank instead. One way around that would using the frame start interrupt instead since that wouldn't fire until the next scanline, but that would require some bigger changes in the interrupt code. So for simplicity we'll just poll until we get past the bad line. v2: Adjust the comments a bit Cc: stable@vger.kernel.org Cc: Jonas Aaberg <cja@gmx.net> Tested-by: NJonas Aaberg <cja@gmx.net> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99086Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161215174734.28779-1-ville.syrjala@linux.intel.comTested-by: NMika Kahola <mika.kahola@intel.com> Reviewed-by: NMika Kahola <mika.kahola@intel.com> (cherry picked from commit ec1b4ee2) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Chris Wilson 提交于
The assertion that we want to make before disabling the pin of the pages for the unknown swizzling quirk is that the quirk is indeed active, and that the quirk is disabled before we do apply it to the pages. Fixes: 2c3a3f44 ("drm/i915: Fix pages pin counting around swizzle quirk") Fixes: 957870f9 ("drm/i915: Split out i915_gem_object_set_tiling()") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170521124014.27678-1-chris@chris-wilson.co.uk Reviewed-bhy: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit 20bb3771) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Chris Wilson 提交于
Commit 7c3f86b6 ("drm/i915: Invalidate the guc ggtt TLB upon insertion") added the restoration of the invalidation routine after the GuC was disabled, but missed that the GuC was unconditionally disabled when not used. This then overwrites the invalidate routine for the older chipsets, causing havoc and breaking resume as the most obvious victim. We place the guard inside i915_ggtt_disable_guc() to be backport friendly (the bug was introduced into v4.11) but it would be preferred to be in more control over when this was guard (i.e. do not try and teardown the data structures before we have enabled them). That should be true with the reorganisation of the guc loaders. Reported-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Fixes: 7c3f86b6 ("drm/i915: Invalidate the guc ggtt TLB upon insertion") Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: <stable@vger.kernel.org> # v4.11+ Link: http://patchwork.freedesktop.org/patch/msgid/20170531190514.3691-1-chris@chris-wilson.co.ukReviewed-by: NMichel Thierry <michel.thierry@intel.com> (cherry picked from commit cb60606d) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Maarten Lankhorst 提交于
On some systems there can be a race condition in which no crtc state is added to the first atomic commit. This results in all crtc's having a null DDB allocation, causing a FIFO underrun on any update until the first modeset. Changes since v1: - Do not take the connection_mutex, this is already done below. Reported-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Inspired-by: NMahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 98d39494 ("drm/i915/gen9: Compute DDB allocation at atomic check time (v4)") Cc: <stable@vger.kernel.org> # v4.8+ Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170531154236.27180-1-maarten.lankhorst@linux.intel.comReviewed-by: NMahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by: NMatt Roper <matthew.d.roper@intel.com> (cherry picked from commit 367d73d2) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Imre Deak 提交于
Since commit bac2a909 Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Date: Wed Jan 21 02:17:42 2015 +0100 PCI / PM: Avoid resuming PCI devices during system suspend PCI devices will default to allowing the system suspend complete optimization where devices are not woken up during system suspend if they were already runtime suspended. This however breaks the i915/HDA drivers for two reasons: - The i915 driver has system suspend specific steps that it needs to run, that bring the device to a different state than its runtime suspended state. - The HDA driver's suspend handler requires power that it will request from the i915 driver's power domain handler. This in turn requires the i915 driver to runtime resume itself, but this won't be possible if the suspend complete optimization is in effect: in this case the i915 runtime PM is disabled and trying to get an RPM reference returns -EACCESS. Solve this by requiring the PCI/PM core to resume the device during system suspend which in effect disables the suspend complete optimization. Regardless of the above commit the optimization stayed disabled for DRM devices until commit d14d2a84 Author: Lukas Wunner <lukas@wunner.de> Date: Wed Jun 8 12:49:29 2016 +0200 drm: Remove dev_pm_ops from drm_class so this patch is in practice a fix for this commit. Another reason for the bug staying hidden for so long is that the optimization for a device is disabled if it's disabled for any of its children devices. i915 may have a backlight device as its child which doesn't support runtime PM and so doesn't allow the optimization either. So if this backlight device got registered the bug stayed hidden. Credits to Marta, Tomi and David who enabled pstore logging, that caught one instance of this issue across a suspend/ resume-to-ram and Ville who rememberd that the optimization was enabled for some devices at one point. The first WARN triggered by the problem: [ 6250.746445] WARNING: CPU: 2 PID: 17384 at drivers/gpu/drm/i915/intel_runtime_pm.c:2846 intel_runtime_pm_get+0x6b/0xd0 [i915] [ 6250.746448] pm_runtime_get_sync() failed: -13 [ 6250.746451] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul snd_hda_codec_realtek snd_hda_codec_generic ghash_clmulni_intel e1000e snd_hda_codec snd_hwdep snd_hda_core ptp mei_me pps_core snd_pcm lpc_ich mei prime_ numbers i2c_hid i2c_designware_platform i2c_designware_core [last unloaded: i915] [ 6250.746512] CPU: 2 PID: 17384 Comm: kworker/u8:0 Tainted: G U W 4.11.0-rc5-CI-CI_DRM_334+ #1 [ 6250.746515] Hardware name: /NUC5i5RYB, BIOS RYBDWi35.86A.0362.2017.0118.0940 01/18/2017 [ 6250.746521] Workqueue: events_unbound async_run_entry_fn [ 6250.746525] Call Trace: [ 6250.746530] dump_stack+0x67/0x92 [ 6250.746536] __warn+0xc6/0xe0 [ 6250.746542] ? pci_restore_standard_config+0x40/0x40 [ 6250.746546] warn_slowpath_fmt+0x46/0x50 [ 6250.746553] ? __pm_runtime_resume+0x56/0x80 [ 6250.746584] intel_runtime_pm_get+0x6b/0xd0 [i915] [ 6250.746610] intel_display_power_get+0x1b/0x40 [i915] [ 6250.746646] i915_audio_component_get_power+0x15/0x20 [i915] [ 6250.746654] snd_hdac_display_power+0xc8/0x110 [snd_hda_core] [ 6250.746661] azx_runtime_resume+0x218/0x280 [snd_hda_intel] [ 6250.746667] pci_pm_runtime_resume+0x76/0xa0 [ 6250.746672] __rpm_callback+0xb4/0x1f0 [ 6250.746677] ? pci_restore_standard_config+0x40/0x40 [ 6250.746682] rpm_callback+0x1f/0x80 [ 6250.746686] ? pci_restore_standard_config+0x40/0x40 [ 6250.746690] rpm_resume+0x4ba/0x740 [ 6250.746698] __pm_runtime_resume+0x49/0x80 [ 6250.746703] pci_pm_suspend+0x57/0x140 [ 6250.746709] dpm_run_callback+0x6f/0x330 [ 6250.746713] ? pci_pm_freeze+0xe0/0xe0 [ 6250.746718] __device_suspend+0xf9/0x370 [ 6250.746724] ? dpm_watchdog_set+0x60/0x60 [ 6250.746730] async_suspend+0x1a/0x90 [ 6250.746735] async_run_entry_fn+0x34/0x160 [ 6250.746741] process_one_work+0x1f2/0x6d0 [ 6250.746749] worker_thread+0x49/0x4a0 [ 6250.746755] kthread+0x107/0x140 [ 6250.746759] ? process_one_work+0x6d0/0x6d0 [ 6250.746763] ? kthread_create_on_node+0x40/0x40 [ 6250.746768] ret_from_fork+0x2e/0x40 [ 6250.746778] ---[ end trace 102a62fd2160f5e6 ]--- v2: - Use the new pci_dev->needs_resume flag, to avoid any overhead during the ->pm_prepare hook. (Rafael) v3: - Update commit message to reference the actual regressing commit. (Lukas) v4: - Rebase on v4 of patch 1/2. Fixes: d14d2a84 ("drm: Remove dev_pm_ops from drm_class") References: https://bugs.freedesktop.org/show_bug.cgi?id=100378 References: https://bugs.freedesktop.org/show_bug.cgi?id=100770 Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Marta Lofstedt <marta.lofstedt@intel.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Tomi Sarvela <tomi.p.sarvela@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Takashi Iwai <tiwai@suse.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: linux-pci@vger.kernel.org Cc: <stable@vger.kernel.org> # v4.10.x: 4d071c32 - PCI/PM: Add needs_resume flag Cc: <stable@vger.kernel.org> # v4.10.x Signed-off-by: NImre Deak <imre.deak@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Reported-and-tested-by: NMarta Lofstedt <marta.lofstedt@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1493726649-32094-2-git-send-email-imre.deak@intel.com (cherry picked from commit adfdf85d) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Nagaraju, Vathsala 提交于
psr1 is also disabled for panel resolution greater than 32X20. Added psr2 check to disable only for psr2 panels having resolution greater than 32X20. issue was introduced by commit-id : "acf45d11" commit message: "PSR2 is restricted to work with panel resolutions upto 3200x2000, move the check to intel_psr_match_conditions and fully block psr." v2: (Rodrigo) Add previous commit details which introduced the issue Fixes: acf45d11 ("drm/i915/psr: disable psr2 for resolution greater than 32X20") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Cc: Yaroslav Shabalin <yaroslav.shabalin@gmail.com> Reported-by: NYaroslav Shabalin <yaroslav.shabalin@gmail.com> Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Nvathsala nagaraju <vathsala.nagaraju@intel.com> Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/49935bdff896ee3140bed471012b9f9110a863a4.1495729964.git.vathsala.nagaraju@intel.com (cherry picked from commit bef8c056) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Chris Wilson 提交于
Allow intel_engine_is_idle() to be called outside of the GT wakeref by acquiring the device runtime pm for ourselves. This allows the function to act as check after we assume the engine is idle and we release the GT wakeref held whilst we have requests. At the moment, we do not call it outside of an awake context but taking the wakeref as required makes it more convenient to use for quick debugging in future. [ 2613.401647] RPM wakelock ref not held during HW access [ 2613.401684] ------------[ cut here ]------------ [ 2613.401720] WARNING: CPU: 5 PID: 7739 at drivers/gpu/drm/i915/intel_drv.h:1787 gen6_read32+0x21f/0x2b0 [i915] [ 2613.401731] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek coretemp snd_hda_codec_generic crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 mii mei_me lpc_ich mei prime_numbers [last unloaded: i915] [ 2613.401823] CPU: 5 PID: 7739 Comm: drv_missed_irq Tainted: G U 4.12.0-rc2-CI-CI_DRM_421+ #1 [ 2613.401825] Hardware name: MSI MS-7924/Z97M-G43(MS-7924), BIOS V1.12 02/15/2016 [ 2613.401840] task: ffff880409e3a740 task.stack: ffffc900084dc000 [ 2613.401861] RIP: 0010:gen6_read32+0x21f/0x2b0 [i915] [ 2613.401863] RSP: 0018:ffffc900084dfce8 EFLAGS: 00010292 [ 2613.401869] RAX: 000000000000002a RBX: ffff8804016a8000 RCX: 0000000000000006 [ 2613.401871] RDX: 0000000000000006 RSI: ffffffff81cbf2d9 RDI: ffffffff81c9e3a7 [ 2613.401874] RBP: ffffc900084dfd18 R08: ffff880409e3afc8 R09: 0000000000000000 [ 2613.401877] R10: 000000008a1c483f R11: 0000000000000000 R12: 000000000000209c [ 2613.401879] R13: 0000000000000001 R14: ffff8804016a8000 R15: ffff8804016ac150 [ 2613.401882] FS: 00007f39ef3dd8c0(0000) GS:ffff88041fb40000(0000) knlGS:0000000000000000 [ 2613.401885] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2613.401887] CR2: 00000000023717c8 CR3: 00000002e7b34000 CR4: 00000000001406e0 [ 2613.401889] Call Trace: [ 2613.401912] intel_engine_is_idle+0x76/0x90 [i915] [ 2613.401931] i915_gem_wait_for_idle+0xe6/0x1e0 [i915] [ 2613.401951] fault_irq_set+0x40/0x90 [i915] [ 2613.401970] i915_ring_test_irq_set+0x42/0x50 [i915] [ 2613.401976] simple_attr_write+0xc7/0xe0 [ 2613.401981] full_proxy_write+0x4f/0x70 [ 2613.401987] __vfs_write+0x23/0x120 [ 2613.401992] ? rcu_read_lock_sched_held+0x75/0x80 [ 2613.401996] ? rcu_sync_lockdep_assert+0x2a/0x50 [ 2613.401999] ? __sb_start_write+0xfa/0x1f0 [ 2613.402004] vfs_write+0xc5/0x1d0 [ 2613.402008] ? trace_hardirqs_on_caller+0xe7/0x1c0 [ 2613.402013] SyS_write+0x44/0xb0 [ 2613.402020] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 2613.402022] RIP: 0033:0x7f39eded6670 [ 2613.402025] RSP: 002b:00007fffdcdcb1a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 2613.402030] RAX: ffffffffffffffda RBX: ffffffff81470203 RCX: 00007f39eded6670 [ 2613.402033] RDX: 0000000000000001 RSI: 000000000041bc33 RDI: 0000000000000006 [ 2613.402036] RBP: ffffc900084dff88 R08: 00007f39ef3dd8c0 R09: 0000000000000001 [ 2613.402038] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000041bc33 [ 2613.402041] R13: 0000000000000006 R14: 0000000000000000 R15: 0000000000000000 [ 2613.402046] ? __this_cpu_preempt_check+0x13/0x20 [ 2613.402052] Code: 01 9b fa e0 0f ff e9 28 fe ff ff 80 3d 6a dd 0e 00 00 0f 85 29 fe ff ff 48 c7 c7 48 19 29 a0 c6 05 56 dd 0e 00 01 e8 da 9a fa e0 <0f> ff e9 0f fe ff ff b9 01 00 00 00 ba 01 00 00 00 44 89 e6 48 [ 2613.402199] ---[ end trace 31f0cfa93ab632bf ]--- Fixes: 5400367a ("drm/i915: Ensure the engine is idle before manually changing HWS") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170530121334.17364-2-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> (cherry picked from commit a091d4ee) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Chris Wilson 提交于
If the device is asleep (no GT wakeref), we know the GPU is already idle. If we add an early return, we can avoid touching registers and checking hw state outside of the assumed GT wakelock. This prevents causing such errors whilst debugging: [ 2613.401647] RPM wakelock ref not held during HW access [ 2613.401684] ------------[ cut here ]------------ [ 2613.401720] WARNING: CPU: 5 PID: 7739 at drivers/gpu/drm/i915/intel_drv.h:1787 gen6_read32+0x21f/0x2b0 [i915] [ 2613.401731] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek coretemp snd_hda_codec_generic crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 mii mei_me lpc_ich mei prime_numbers [last unloaded: i915] [ 2613.401823] CPU: 5 PID: 7739 Comm: drv_missed_irq Tainted: G U 4.12.0-rc2-CI-CI_DRM_421+ #1 [ 2613.401825] Hardware name: MSI MS-7924/Z97M-G43(MS-7924), BIOS V1.12 02/15/2016 [ 2613.401840] task: ffff880409e3a740 task.stack: ffffc900084dc000 [ 2613.401861] RIP: 0010:gen6_read32+0x21f/0x2b0 [i915] [ 2613.401863] RSP: 0018:ffffc900084dfce8 EFLAGS: 00010292 [ 2613.401869] RAX: 000000000000002a RBX: ffff8804016a8000 RCX: 0000000000000006 [ 2613.401871] RDX: 0000000000000006 RSI: ffffffff81cbf2d9 RDI: ffffffff81c9e3a7 [ 2613.401874] RBP: ffffc900084dfd18 R08: ffff880409e3afc8 R09: 0000000000000000 [ 2613.401877] R10: 000000008a1c483f R11: 0000000000000000 R12: 000000000000209c [ 2613.401879] R13: 0000000000000001 R14: ffff8804016a8000 R15: ffff8804016ac150 [ 2613.401882] FS: 00007f39ef3dd8c0(0000) GS:ffff88041fb40000(0000) knlGS:0000000000000000 [ 2613.401885] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2613.401887] CR2: 00000000023717c8 CR3: 00000002e7b34000 CR4: 00000000001406e0 [ 2613.401889] Call Trace: [ 2613.401912] intel_engine_is_idle+0x76/0x90 [i915] [ 2613.401931] i915_gem_wait_for_idle+0xe6/0x1e0 [i915] [ 2613.401951] fault_irq_set+0x40/0x90 [i915] [ 2613.401970] i915_ring_test_irq_set+0x42/0x50 [i915] [ 2613.401976] simple_attr_write+0xc7/0xe0 [ 2613.401981] full_proxy_write+0x4f/0x70 [ 2613.401987] __vfs_write+0x23/0x120 [ 2613.401992] ? rcu_read_lock_sched_held+0x75/0x80 [ 2613.401996] ? rcu_sync_lockdep_assert+0x2a/0x50 [ 2613.401999] ? __sb_start_write+0xfa/0x1f0 [ 2613.402004] vfs_write+0xc5/0x1d0 [ 2613.402008] ? trace_hardirqs_on_caller+0xe7/0x1c0 [ 2613.402013] SyS_write+0x44/0xb0 [ 2613.402020] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 2613.402022] RIP: 0033:0x7f39eded6670 [ 2613.402025] RSP: 002b:00007fffdcdcb1a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 2613.402030] RAX: ffffffffffffffda RBX: ffffffff81470203 RCX: 00007f39eded6670 [ 2613.402033] RDX: 0000000000000001 RSI: 000000000041bc33 RDI: 0000000000000006 [ 2613.402036] RBP: ffffc900084dff88 R08: 00007f39ef3dd8c0 R09: 0000000000000001 [ 2613.402038] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000041bc33 [ 2613.402041] R13: 0000000000000006 R14: 0000000000000000 R15: 0000000000000000 [ 2613.402046] ? __this_cpu_preempt_check+0x13/0x20 [ 2613.402052] Code: 01 9b fa e0 0f ff e9 28 fe ff ff 80 3d 6a dd 0e 00 00 0f 85 29 fe ff ff 48 c7 c7 48 19 29 a0 c6 05 56 dd 0e 00 01 e8 da 9a fa e0 <0f> ff e9 0f fe ff ff b9 01 00 00 00 ba 01 00 00 00 44 89 e6 48 [ 2613.402199] ---[ end trace 31f0cfa93ab632bf ]--- Fixes: 25112b64 ("drm/i915: Wait for all engines to be idle as part of i915_gem_wait_for_idle()") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170530121334.17364-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit 863e9fde) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Kai Chen 提交于
The decoupled MMIO feature doesn't work as intended by HW team. Enabling it with forcewake will only make debugging efforts more difficult, so let's disable it. Fixes: 85ee17eb ("drm/i915/bxt: Broxton decoupled MMIO") Cc: Zhe Wang <zhe1.wang@intel.com> Cc: Praveen Paneri <praveen.paneri@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by: NKai Chen <kai.chen@intel.com> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170523215812.18328-2-kai.chen@intel.com (cherry picked from commit 0051c10a) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Michal Wajdeczko 提交于
This member was dropped long time ago. Fixes: 774439e1 ("drm/i915/guc: re-optimise i915_guc_client layout") Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170518113104.54400-1-michal.wajdeczko@intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 4afc67be) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Jon Bloomfield 提交于
BXT has a H/W issue with IOMMU which can lead to system hangs when Aperture accesses are queued within the GAM behind GTT Accesses. This patch avoids the condition by wrapping all GTT updates in stop_machine and using a flushing read prior to restarting the machine. The stop_machine guarantees no new Aperture accesses can begin while the PTE writes are being emmitted. The flushing read ensures that any following Aperture accesses cannot begin until the PTE writes have been cleared out of the GAM's fifo. Only FOLLOWING Aperture accesses need to be separated from in flight PTE updates. PTE Writes may follow tightly behind already in flight Aperture accesses, so no flushing read is required at the start of a PTE update sequence. This issue was reproduced by running igt/gem_readwrite and igt/gem_render_copy simultaneously from different processes, each in a tight loop, with INTEL_IOMMU enabled. This patch was originally published as: drm/i915: Serialize GTT Updates on BXT [Note: This will cause a performance penalty for some use cases, but avoiding hangs trumps performance hits. This may need to be worked around in Mesa to recover the lost performance.] v2: Move bxt/iommu detection into static function Remove #ifdef CONFIG_INTEL_IOMMU protection Make function names more reflective of purpose Move flushing read into static function v3: Tidy up for checkpatch.pl Testcase: igt/gem_concurrent_blit Signed-off-by: NJon Bloomfield <jon.bloomfield@intel.com> Cc: John Harrison <john.C.Harrison@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: stable@vger.kernel.org Link: http://patchwork.freedesktop.org/patch/msgid/1495641251-30022-1-git-send-email-jon.bloomfield@intel.comReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 0ef34ad6) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
- 05 6月, 2017 8 次提交
-
-
由 Linus Torvalds 提交于
-
由 Richard Narron 提交于
This fixes a problem with reading files larger than 2GB from a UFS-2 file system: https://bugzilla.kernel.org/show_bug.cgi?id=195721 The incorrect UFS s_maxsize limit became a problem as of commit c2a9737f ("vfs,mm: fix a dead loop in truncate_inode_pages_range()") which started using s_maxbytes to avoid a page index overflow in do_generic_file_read(). That caused files to be truncated on UFS-2 file systems because the default maximum file size is 2GB (MAX_NON_LFS) and UFS didn't update it. Here I simply increase the default to a common value used by other file systems. Signed-off-by: NRichard Narron <comet.berkeley@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will B <will.brokenbourgh2877@gmail.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: <stable@vger.kernel.org> # v4.9 and backports of c2a9737fSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfixes from Trond Myklebust: "Bugfixes include: - Fix a typo in commit e0926934 ("NFS append COMMIT after synchronous COPY") that breaks copy offload - Fix the connect error propagation in xs_tcp_setup_socket() - Fix a lock leak in nfs40_walk_client_list - Verify that pNFS requests lie within the offset range of the layout segment" * tag 'nfs-for-4.12-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: nfs: Mark unnecessarily extern functions as static SUNRPC: ensure correct error is reported by xs_tcp_setup_socket() NFSv4.0: Fix a lock leak in nfs40_walk_client_list pnfs: Fix the check for requests in range of layout segment xprtrdma: Delete an error message for a failed memory allocation in xprt_rdma_bc_setup() pNFS/flexfiles: missing error code in ff_layout_alloc_lseg() NFS fix COMMIT after COPY
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty fix from Greg KH: "Here is a single tty core fix for 4.12-rc4. It reverts a patch that a lot of people reported as causing lockdep and other warnings. Right after I reverted this in my tree, it seems like another "correct" fix might have shown up, but it's too late in the release cycle to be messing with tty core locking, so let's just revert this for now to go back how things always have been and try it again for 4.13. This has not been in linux-next as I only reverted it a few hours ago" * tag 'tty-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "tty: fix port buffer locking"
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input subsystem fixes from Dmitry Torokhov: - a couple of regression fixes in synaptics and axp20x-pek drivers - try to ease transition from PS/2 to RMI for Synaptics touchpad users by ensuring we do not try to activate RMI mode when RMI SMBus support is not enabled, and nag users a bit to enable it - plus a couple of other changes that seemed worthwhile for this release * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: axp20x-pek - switch to acpi_dev_present and check for ACPI0011 too Input: axp20x-pek - only check for "INTCFD9" ACPI device on Cherry Trail Input: tm2-touchkey - use LEN_ON as boolean value instead of LED_FULL Input: synaptics - tell users to report when they should be using rmi-smbus Input: synaptics - warn the users when there is a better mode Input: synaptics - keep PS/2 around when RMI4_SMB is not enabled Input: synaptics - clear device info before filling in Input: silead - disable interrupt during suspend
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux由 Linus Torvalds 提交于
Pull RTC fixlet from Alexandre Belloni: "A single patch, not really a fix but I don't think there is any reason to delay it. Change the mailing list address" * tag 'rtc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: MAINTAINERS: update RTC mailing list
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "This is nine fixes, seven of which are for the qedi driver (new as of 4.10) the other two are a use after free in the cxgbi drivers and a potential NULL dereference in the rdac device handler" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: libcxgbi: fix skb use after free scsi: qedi: Fix endpoint NULL panic during recovery. scsi: qedi: set max_fin_rt default value scsi: qedi: Set firmware tcp msl timer value. scsi: qedi: Fix endpoint NULL panic in qedi_set_path. scsi: qedi: Set dma_boundary to 0xfff. scsi: qedi: Correctly set firmware max supported BDs. scsi: qedi: Fix bad pte call trace when iscsiuio is stopped. scsi: scsi_dh_rdac: Use ctlr directly in rdac_failover_get()
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma由 Linus Torvalds 提交于
Pull rdma fixes from Doug Ledford: "For the most part this is just a minor -rc cycle for the rdma subsystem. Even given that this is all of the -rc patches since the merge window closed, it's still only about 25 patches: - Multiple i40iw, nes, iw_cxgb4, hfi1, qib, mlx4, mlx5 fixes - A few upper layer protocol fixes (IPoIB, iSER, SRP) - A modest number of core fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (26 commits) RDMA/SA: Fix kernel panic in CMA request handler flow RDMA/umem: Fix missing mmap_sem in get umem ODP call RDMA/core: not to set page dirty bit if it's already set. RDMA/uverbs: Declare local function static and add brackets to sizeof RDMA/netlink: Reduce exposure of RDMA netlink functions RDMA/srp: Fix NULL deref at srp_destroy_qp() RDMA/IPoIB: Limit the ipoib_dev_uninit_default scope RDMA/IPoIB: Replace netdev_priv with ipoib_priv for ipoib_get_link_ksettings RDMA/qedr: add null check before pointer dereference RDMA/mlx5: set UMR wqe fence according to HCA cap net/mlx5: Define interface bits for fencing UMR wqe RDMA/mlx4: Fix MAD tunneling when SRIOV is enabled RDMA/qib,hfi1: Fix MR reference count leak on write with immediate RDMA/hfi1: Defer setting VL15 credits to link-up interrupt RDMA/hfi1: change PCI bar addr assignments to Linux API functions RDMA/hfi1: fix array termination by appending NULL to attr array RDMA/iw_cxgb4: fix the calculation of ipv6 header size RDMA/iw_cxgb4: calculate t4_eq_status_entries properly RDMA/iw_cxgb4: Avoid touch after free error in ARP failure handlers RDMA/nes: ACK MPA Reply frame ...
-
- 04 6月, 2017 2 次提交
-
-
由 Greg Kroah-Hartman 提交于
This reverts commit 925bb1ce. It causes lots of warnings and problems so for now, let's just revert it. Reported-by: <valdis.kletnieks@vt.edu> Reported-by: NRussell King <linux@armlinux.org.uk> Reported-by: NSergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Reported-by: NJiri Slaby <jslaby@suse.cz> Reported-by: NAndrey Konovalov <andreyknvl@google.com> Acked-by: NVegard Nossum <vegard.nossum@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jan Kara 提交于
nfs_initialise_sb() and nfs_clone_super() are declared as extern even though they are used only in fs/nfs/super.c. Mark them as static. Also remove explicit 'inline' directive from nfs_initialise_sb() and leave it upto compiler to decide whether inlining is worth it. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 03 6月, 2017 18 次提交
-
-
由 Linus Torvalds 提交于
Merge tag 'hwmon-for-linus-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "A couple of patches for the aspeed pwm fan driver" * tag 'hwmon-for-linus-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (aspeed-pwm-tacho) make fan/pwm names start with index 1 hwmon: (aspeed-pwm-tacho) Call of_node_put() on a node not claimed hwmon: (aspeed-pwm-tacho) On read failure return -ETIMEDOUT hwmon: (aspeed-pwm-tacho) Select REGMAP
-
git://git.infradead.org/linux-mtd由 Linus Torvalds 提交于
Pull MTD fixes from Brian Norris: "NAND updates from Boris: tango fixes: - Add missing MODULE_DEVICE_TABLE() in tango_nand.c - Update the number of corrected bitflips core fixes: - Fix a long standing memory leak in nand_scan_tail() - Fix several bugs introduced by the per-vendor init/detection infrastructure (introduced in 4.12) - Add a static specifier to nand_ooblayout_lp_hamming_ops definition" * tag 'for-linus-20170602' of git://git.infradead.org/linux-mtd: mtd: nand: make nand_ooblayout_lp_hamming_ops static mtd: nand: tango: Update ecc_stats.corrected mtd: nand: tango: Export OF device ID table as module aliases mtd: nand: samsung: warn about un-parseable ECC info mtd: nand: free vendor-specific resources in init failure paths mtd: nand: drop unneeded module.h include mtd: nand: don't leak buffers when ->scan_bbt() fails
-
由 Stefan Schaeckeler 提交于
Make fan and pwm names in sysfs start with index 1 in accordance to Documentation/hwmon/sysfs-interface conventions. Current implementation starts with index 0, making tools such as sensors(1) skip the first fan. Signed-off-by: NStefan Schaeckeler <sschaeck@cisco.com> Fixes: 2d7a548a ("drivers: hwmon: Support for ASPEED PWM/Fan tach") Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Stefan Schaeckeler 提交于
Call of_node_put() on a node claimed with of_node_get() or by any other means such as for_each_child_of_node(). Signed-off-by: NStefan Schaeckeler <sschaeck@cisco.com> Fixes: 2d7a548a ("drivers: hwmon: Support for ASPEED PWM/Fan tach") Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Hans de Goede 提交于
acpi_dev_found checks that there is a matching ACPI node, but it may be disabled (_STA method returns 0) in which case the soc_button_array driver will not bind to it and axp20x-pek should handle the power-button. This commit switches from acpi_dev_found to acpi_dev_present to avoid not registering an input-dev for the powerbutton when there is a disabled PNP0C40 device. The ACPI-6.0 standard defines a standard gpio button device using the ACPI0011 HID replacing the custom PNP0C40 gpio device, many newer devices define both PNP0C40 and ACPI0011 devices enabling one or the other depending on whether the BIOS thinks it is going to boot Android or Windows. This commit adds a check for the ACPI0011 device, so that if either device is present *and* enabled we don't register an input-dev for the powerbutton. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Hans de Goede 提交于
Commit 9b13a4ca ("Input: axp20x-pek - do not register input device on some systems") added a check for the INTCFD9 ACPI device which also handles the powerbutton as on some systems the powerbutton is connected to both the PMIC, handled by axp20x-pek, and to a gpio on the SoC, handled by soc_button_array which attaches itself to the INTCFD9 ACPI device. Testing + comparing DSDTs has shown that this only happens on Cherry Trail devices with an AXP288 PMIC, the AXP288 PMIC is also used on Bay Trail devices but there the power button is only connected to the PMIC and not handled by soc_button_array. This means that the INTCFD9 check has caused a regression on Bay Trail devices, causing power-button presses to no longer be seen. This commit fixes this by limiting the check to devices where the ACPI node for the AXP288 contains a _HRV (hardware revision) attribute with a value of 3 which indicates we are dealing with a Cherry Trail platform. Fixes: 9b13a4ca ("Input: axp20x-pek - do not register input ...") Reported-by: NСергей Трусов <t.rus76@ya.ru> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Dmitry Torokhov 提交于
Merge with mainline to get acpi_dev_present() needed by patches to axp20x-pek driver.
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI fixes from Rafael Wysocki: "These revert one more problematic commit related to the ACPI-based handling of laptop lids and make some unuseful error messages coming from ACPICA go away. Specifics: - Revert one more commit related to the ACPI-based handling of laptop lids that changed the default behavior on laptops that booted with closed lids and introduced a regression there (Benjamin Tissoires). - Add a missing acpi_put_table() to the code implementing the /sys/firmware/acpi/tables interface to prevent a counter in the ACPICA core from overflowing (Dan Williams). - Drop error messages printed by ACPICA on acpi_get_table() reference counting mismatches as they need not indicate real errors at this point (Lv Zheng)" * tag 'acpi-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Tables: Fix regression introduced by a too early mechanism enabling Revert "ACPI / button: Change default behavior to lid_init_state=open" ACPI / sysfs: fix acpi_get_table() leak / acpi-sysfs denial of service
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management fixes from Rafael Wysocki: "These fix two bugs in error code paths in the cpufreq core and in the kirkwood-cpufreq driver. Specifics: - Make cpufreq_register_driver() return an error if the ->init() calls fail for all CPUs to prevent non-functional drivers from hanging around for no reason (David Arcari). - Make kirkwood-cpufreq check the return value of clk_prepare_enable() (which may fail) as appropriate (Arvind Yadav)" * tag 'pm-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: kirkwood-cpufreq:- Handle return value of clk_prepare_enable() cpufreq: cpufreq_register_driver() should return -ENODEV if init fails
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random由 Linus Torvalds 提交于
Pull /dev/random bug fix from Ted Ts'o: "Fix a race on architectures with prioritized interrupts (such as m68k) which can causes crashes in drivers/char/random.c:get_reg()" * tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: fix race in drivers/char/random.c:get_reg()
-
由 Linus Torvalds 提交于
Merge misc fixes from Andrew Morton: "15 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: scripts/gdb: make lx-dmesg command work (reliably) mm: consider memblock reservations for deferred memory initialization sizing mm/hugetlb: report -EHWPOISON not -EFAULT when FOLL_HWPOISON is specified mlock: fix mlock count can not decrease in race condition mm/migrate: fix refcount handling when !hugepage_migration_supported() dax: fix race between colliding PMD & PTE entries mm: avoid spurious 'bad pmd' warning messages mm/page_alloc.c: make sure OOM victim can try allocations with no watermarks once pcmcia: remove left-over %Z format slub/memcg: cure the brainless abuse of sysfs attributes initramfs: fix disabling of initramfs (and its compression) mm: clarify why we want kmalloc before falling backto vmallock frv: declare jiffies to be located in the .data section include/linux/gfp.h: fix ___GFP_NOLOCKDEP value ksm: prevent crash after write_protect_page fails
-
由 André Draszik 提交于
lx-dmesg needs access to the log_buf symbol from printk.c. Unfortunately, the symbol log_buf also exists in BPF's verifier.c and hence gdb can pick one or the other. If it happens to pick BPF's log_buf, lx-dmesg doesn't work: (gdb) lx-dmesg Python Exception <class 'gdb.MemoryError'> Cannot access memory at address 0x0: Error occurred in Python command: Cannot access memory at address 0x0 (gdb) p log_buf $15 = 0x0 Luckily, GDB has a way to deal with this, see https://sourceware.org/gdb/onlinedocs/gdb/Symbols.html (gdb) info variables ^log_buf$ All variables matching regular expression "^log_buf$": File <linux.git>/kernel/bpf/verifier.c: static char *log_buf; File <linux.git>/kernel/printk/printk.c: static char *log_buf; (gdb) p 'verifier.c'::log_buf $1 = 0x0 (gdb) p 'printk.c'::log_buf $2 = 0x811a6aa0 <__log_buf> "" (gdb) p &log_buf $3 = (char **) 0x8120fe40 <log_buf> (gdb) p &'verifier.c'::log_buf $4 = (char **) 0x8120fe40 <log_buf> (gdb) p &'printk.c'::log_buf $5 = (char **) 0x8048b7d0 <log_buf> By being explicit about the location of the symbol, we can make lx-dmesg work again. While at it, do the same for the other symbols we need from printk.c Link: http://lkml.kernel.org/r/20170526112222.3414-1-git@andred.netSigned-off-by: NAndré Draszik <git@andred.net> Tested-by: NKieran Bingham <kieran@bingham.xyz> Acked-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
We have seen an early OOM killer invocation on ppc64 systems with crashkernel=4096M: kthreadd invoked oom-killer: gfp_mask=0x16040c0(GFP_KERNEL|__GFP_COMP|__GFP_NOTRACK), nodemask=7, order=0, oom_score_adj=0 kthreadd cpuset=/ mems_allowed=7 CPU: 0 PID: 2 Comm: kthreadd Not tainted 4.4.68-1.gd7fe927-default #1 Call Trace: dump_stack+0xb0/0xf0 (unreliable) dump_header+0xb0/0x258 out_of_memory+0x5f0/0x640 __alloc_pages_nodemask+0xa8c/0xc80 kmem_getpages+0x84/0x1a0 fallback_alloc+0x2a4/0x320 kmem_cache_alloc_node+0xc0/0x2e0 copy_process.isra.25+0x260/0x1b30 _do_fork+0x94/0x470 kernel_thread+0x48/0x60 kthreadd+0x264/0x330 ret_from_kernel_thread+0x5c/0xa4 Mem-Info: active_anon:0 inactive_anon:0 isolated_anon:0 active_file:0 inactive_file:0 isolated_file:0 unevictable:0 dirty:0 writeback:0 unstable:0 slab_reclaimable:5 slab_unreclaimable:73 mapped:0 shmem:0 pagetables:0 bounce:0 free:0 free_pcp:0 free_cma:0 Node 7 DMA free:0kB min:0kB low:0kB high:0kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:52428800kB managed:110016kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:320kB slab_unreclaimable:4672kB kernel_stack:1152kB pagetables:0kB unstable:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes lowmem_reserve[]: 0 0 0 0 Node 7 DMA: 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 0*8192kB 0*16384kB = 0kB 0 total pagecache pages 0 pages in swap cache Swap cache stats: add 0, delete 0, find 0/0 Free swap = 0kB Total swap = 0kB 819200 pages RAM 0 pages HighMem/MovableOnly 817481 pages reserved 0 pages cma reserved 0 pages hwpoisoned the reason is that the managed memory is too low (only 110MB) while the rest of the the 50GB is still waiting for the deferred intialization to be done. update_defer_init estimates the initial memoty to initialize to 2GB at least but it doesn't consider any memory allocated in that range. In this particular case we've had Reserving 4096MB of memory at 128MB for crashkernel (System RAM: 51200MB) so the low 2GB is mostly depleted. Fix this by considering memblock allocations in the initial static initialization estimation. Move the max_initialise to reset_deferred_meminit and implement a simple memblock_reserved_memory helper which iterates all reserved blocks and sums the size of all that start below the given address. The cumulative size is than added on top of the initial estimation. This is still not ideal because reset_deferred_meminit doesn't consider holes and so reservation might be above the initial estimation whihch we ignore but let's make the logic simpler until we really need to handle more complicated cases. Fixes: 3a80a7fa ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set") Link: http://lkml.kernel.org/r/20170531104010.GI27783@dhcp22.suse.czSigned-off-by: NMichal Hocko <mhocko@suse.com> Acked-by: NMel Gorman <mgorman@suse.de> Tested-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> [4.2+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 James Morse 提交于
KVM uses get_user_pages() to resolve its stage2 faults. KVM sets the FOLL_HWPOISON flag causing faultin_page() to return -EHWPOISON when it finds a VM_FAULT_HWPOISON. KVM handles these hwpoison pages as a special case. (check_user_page_hwpoison()) When huge pages are involved, this doesn't work so well. get_user_pages() calls follow_hugetlb_page(), which stops early if it receives VM_FAULT_HWPOISON from hugetlb_fault(), eventually returning -EFAULT to the caller. The step to map this to -EHWPOISON based on the FOLL_ flags is missing. The hwpoison special case is skipped, and -EFAULT is returned to user-space, causing Qemu or kvmtool to exit. Instead, move this VM_FAULT_ to errno mapping code into a header file and use it from faultin_page() and follow_hugetlb_page(). With this, KVM works as expected. This isn't a problem for arm64 today as we haven't enabled MEMORY_FAILURE, but I can't see any reason this doesn't happen on x86 too, so I think this should be a fix. This doesn't apply earlier than stable's v4.11.1 due to all sorts of cleanup. [james.morse@arm.com: add vm_fault_to_errno() call to faultin_page()] suggested. Link: http://lkml.kernel.org/r/20170525171035.16359-1-james.morse@arm.com [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20170524160900.28786-1-james.morse@arm.comSigned-off-by: NJames Morse <james.morse@arm.com> Acked-by: NPunit Agrawal <punit.agrawal@arm.com> Acked-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> [4.11.1+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yisheng Xie 提交于
Kefeng reported that when running the follow test, the mlock count in meminfo will increase permanently: [1] testcase linux:~ # cat test_mlockal grep Mlocked /proc/meminfo for j in `seq 0 10` do for i in `seq 4 15` do ./p_mlockall >> log & done sleep 0.2 done # wait some time to let mlock counter decrease and 5s may not enough sleep 5 grep Mlocked /proc/meminfo linux:~ # cat p_mlockall.c #include <sys/mman.h> #include <stdlib.h> #include <stdio.h> #define SPACE_LEN 4096 int main(int argc, char ** argv) { int ret; void *adr = malloc(SPACE_LEN); if (!adr) return -1; ret = mlockall(MCL_CURRENT | MCL_FUTURE); printf("mlcokall ret = %d\n", ret); ret = munlockall(); printf("munlcokall ret = %d\n", ret); free(adr); return 0; } In __munlock_pagevec() we should decrement NR_MLOCK for each page where we clear the PageMlocked flag. Commit 1ebb7cc6 ("mm: munlock: batch NR_MLOCK zone state updates") has introduced a bug where we don't decrement NR_MLOCK for pages where we clear the flag, but fail to isolate them from the lru list (e.g. when the pages are on some other cpu's percpu pagevec). Since PageMlocked stays cleared, the NR_MLOCK accounting gets permanently disrupted by this. Fix it by counting the number of page whose PageMlock flag is cleared. Fixes: 1ebb7cc6 (" mm: munlock: batch NR_MLOCK zone state updates") Link: http://lkml.kernel.org/r/1495678405-54569-1-git-send-email-xieyisheng1@huawei.comSigned-off-by: NYisheng Xie <xieyisheng1@huawei.com> Reported-by: NKefeng Wang <wangkefeng.wang@huawei.com> Tested-by: NKefeng Wang <wangkefeng.wang@huawei.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Joern Engel <joern@logfs.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michel Lespinasse <walken@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: zhongjiang <zhongjiang@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Punit Agrawal 提交于
On failing to migrate a page, soft_offline_huge_page() performs the necessary update to the hugepage ref-count. But when !hugepage_migration_supported() , unmap_and_move_hugepage() also decrements the page ref-count for the hugepage. The combined behaviour leaves the ref-count in an inconsistent state. This leads to soft lockups when running the overcommitted hugepage test from mce-tests suite. Soft offlining pfn 0x83ed600 at process virtual address 0x400000000000 soft offline: 0x83ed600: migration failed 1, type 1fffc00000008008 (uptodate|head) INFO: rcu_preempt detected stalls on CPUs/tasks: Tasks blocked on level-0 rcu_node (CPUs 0-7): P2715 (detected by 7, t=5254 jiffies, g=963, c=962, q=321) thugetlb_overco R running task 0 2715 2685 0x00000008 Call trace: dump_backtrace+0x0/0x268 show_stack+0x24/0x30 sched_show_task+0x134/0x180 rcu_print_detail_task_stall_rnp+0x54/0x7c rcu_check_callbacks+0xa74/0xb08 update_process_times+0x34/0x60 tick_sched_handle.isra.7+0x38/0x70 tick_sched_timer+0x4c/0x98 __hrtimer_run_queues+0xc0/0x300 hrtimer_interrupt+0xac/0x228 arch_timer_handler_phys+0x3c/0x50 handle_percpu_devid_irq+0x8c/0x290 generic_handle_irq+0x34/0x50 __handle_domain_irq+0x68/0xc0 gic_handle_irq+0x5c/0xb0 Address this by changing the putback_active_hugepage() in soft_offline_huge_page() to putback_movable_pages(). This only triggers on systems that enable memory failure handling (ARCH_SUPPORTS_MEMORY_FAILURE) but not hugepage migration (!ARCH_ENABLE_HUGEPAGE_MIGRATION). I imagine this wasn't triggered as there aren't many systems running this configuration. [akpm@linux-foundation.org: remove dead comment, per Naoya] Link: http://lkml.kernel.org/r/20170525135146.32011-1-punit.agrawal@arm.comReported-by: NManoj Iyer <manoj.iyer@canonical.com> Tested-by: NManoj Iyer <manoj.iyer@canonical.com> Suggested-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: NPunit Agrawal <punit.agrawal@arm.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> [3.14+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ross Zwisler 提交于
We currently have two related PMD vs PTE races in the DAX code. These can both be easily triggered by having two threads reading and writing simultaneously to the same private mapping, with the key being that private mapping reads can be handled with PMDs but private mapping writes are always handled with PTEs so that we can COW. Here is the first race: CPU 0 CPU 1 (private mapping write) __handle_mm_fault() create_huge_pmd() - FALLBACK handle_pte_fault() passes check for pmd_devmap() (private mapping read) __handle_mm_fault() create_huge_pmd() dax_iomap_pmd_fault() inserts PMD dax_iomap_pte_fault() does a PTE fault, but we already have a DAX PMD installed in our page tables at this spot. Here's the second race: CPU 0 CPU 1 (private mapping read) __handle_mm_fault() passes check for pmd_none() create_huge_pmd() dax_iomap_pmd_fault() inserts PMD (private mapping write) __handle_mm_fault() create_huge_pmd() - FALLBACK (private mapping read) __handle_mm_fault() passes check for pmd_none() create_huge_pmd() handle_pte_fault() dax_iomap_pte_fault() inserts PTE dax_iomap_pmd_fault() inserts PMD, but we already have a PTE at this spot. The core of the issue is that while there is isolation between faults to the same range in the DAX fault handlers via our DAX entry locking, there is no isolation between faults in the code in mm/memory.c. This means for instance that this code in __handle_mm_fault() can run: if (pmd_none(*vmf.pmd) && transparent_hugepage_enabled(vma)) { ret = create_huge_pmd(&vmf); But by the time we actually get to run the fault handler called by create_huge_pmd(), the PMD is no longer pmd_none() because a racing PTE fault has installed a normal PMD here as a parent. This is the cause of the 2nd race. The first race is similar - there is the following check in handle_pte_fault(): } else { /* See comment in pte_alloc_one_map() */ if (pmd_devmap(*vmf->pmd) || pmd_trans_unstable(vmf->pmd)) return 0; So if a pmd_devmap() PMD (a DAX PMD) has been installed at vmf->pmd, we will bail and retry the fault. This is correct, but there is nothing preventing the PMD from being installed after this check but before we actually get to the DAX PTE fault handlers. In my testing these races result in the following types of errors: BUG: Bad rss-counter state mm:ffff8800a817d280 idx:1 val:1 BUG: non-zero nr_ptes on freeing mm: 15 Fix this issue by having the DAX fault handlers verify that it is safe to continue their fault after they have taken an entry lock to block other racing faults. [ross.zwisler@linux.intel.com: improve fix for colliding PMD & PTE entries] Link: http://lkml.kernel.org/r/20170526195932.32178-1-ross.zwisler@linux.intel.com Link: http://lkml.kernel.org/r/20170522215749.23516-2-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Reported-by: NPawel Lebioda <pawel.lebioda@intel.com> Reviewed-by: NJan Kara <jack@suse.cz> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Pawel Lebioda <pawel.lebioda@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Xiong Zhou <xzhou@redhat.com> Cc: Eryu Guan <eguan@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ross Zwisler 提交于
When the pmd_devmap() checks were added by 5c7fb56e ("mm, dax: dax-pmd vs thp-pmd vs hugetlbfs-pmd") to add better support for DAX huge pages, they were all added to the end of if() statements after existing pmd_trans_huge() checks. So, things like: - if (pmd_trans_huge(*pmd)) + if (pmd_trans_huge(*pmd) || pmd_devmap(*pmd)) When further checks were added after pmd_trans_unstable() checks by commit 7267ec00 ("mm: postpone page table allocation until we have page to map") they were also added at the end of the conditional: + if (pmd_trans_unstable(fe->pmd) || pmd_devmap(*fe->pmd)) This ordering is fine for pmd_trans_huge(), but doesn't work for pmd_trans_unstable(). This is because DAX huge pages trip the bad_pmd() check inside of pmd_none_or_trans_huge_or_clear_bad() (called by pmd_trans_unstable()), which prints out a warning and returns 1. So, we do end up doing the right thing, but only after spamming dmesg with suspicious looking messages: mm/pgtable-generic.c:39: bad pmd ffff8808daa49b88(84000001006000a5) Reorder these checks in a helper so that pmd_devmap() is checked first, avoiding the error messages, and add a comment explaining why the ordering is important. Fixes: commit 7267ec00 ("mm: postpone page table allocation until we have page to map") Link: http://lkml.kernel.org/r/20170522215749.23516-1-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: NJan Kara <jack@suse.cz> Cc: Pawel Lebioda <pawel.lebioda@intel.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Xiong Zhou <xzhou@redhat.com> Cc: Eryu Guan <eguan@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-