- 10 2月, 2017 1 次提交
-
-
由 Wei Yongjun 提交于
Fix the following sparse warnings: drivers/edac/fsl_ddr_edac.c:148:1: warning: symbol 'dev_attr_inject_data_hi' was not declared. Should it be static? drivers/edac/fsl_ddr_edac.c:150:1: warning: symbol 'dev_attr_inject_data_lo' was not declared. Should it be static? drivers/edac/fsl_ddr_edac.c:152:1: warning: symbol 'dev_attr_inject_ctrl' was not declared. Should it be static? Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170209150424.15124-1-weiyj.lk@gmail.comSigned-off-by: NBorislav Petkov <bp@suse.de>
-
- 03 2月, 2017 1 次提交
-
-
由 Chris Packham 提交于
The L2 cache controller on the T2080 SoC has similar capabilities to the others already supported by the mpc85xx_edac driver. Add it to the list of compatible devices. Signed-off-by: NChris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: NJohannes Thumshirn <jth@kernel.org> Acked-by: NMichael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: devicetree@vger.kernel.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20170201231624.28843-1-chris.packham@alliedtelesis.co.nzSigned-off-by: NBorislav Petkov <bp@suse.de>
-
- 28 1月, 2017 8 次提交
-
-
由 Yazen Ghannam 提交于
Match one of the devices in amd64_cpuids[] before loading the module. This is an additional sanity check against users trying to load amd64_edac_mod on unsupported systems. Signed-off-by: NYazen Ghannam <Yazen.Ghannam@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1485537863-2707-9-git-send-email-Yazen.Ghannam@amd.com [ Get rid of err_ret label, make it a bit more readable this way. ] Signed-off-by: NBorislav Petkov <bp@suse.de>
-
由 Yazen Ghannam 提交于
Having ECC disabled on a node doesn't necessarily mean that it's disabled for the entire system. So let's return a non-failing code when ECC is disabled on a node. This way we can skip initialization for the node but still continue with the remaining nodes. After probing all instances, make sure we have at least one MC device allocated. This issue is seen and fix tested on Fam15h and Fam17h MCM systems. Signed-off-by: NYazen Ghannam <Yazen.Ghannam@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1485537863-2707-8-git-send-email-Yazen.Ghannam@amd.comSigned-off-by: NBorislav Petkov <bp@suse.de>
-
由 Yazen Ghannam 提交于
We need to know if any MC devices have been allocated. Signed-off-by: NYazen Ghannam <Yazen.Ghannam@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1485537863-2707-7-git-send-email-Yazen.Ghannam@amd.com [ Prettify text. ] Signed-off-by: NBorislav Petkov <bp@suse.de>
-
由 Yazen Ghannam 提交于
amd64_{debug,notice} don't have any users, so remove them. Signed-off-by: NYazen Ghannam <Yazen.Ghannam@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1485537863-2707-6-git-send-email-Yazen.Ghannam@amd.comSigned-off-by: NBorislav Petkov <bp@suse.de>
-
由 Yazen Ghannam 提交于
Print the node number when informing that DRAM ECC is disabled so that we can show which nodes have DRAM ECC disabled. Also, print more detailed system information as edac_dbg(), so as to not bother general users. Switch amd64_notice to amd64_info to match the message above it. Signed-off-by: NYazen Ghannam <Yazen.Ghannam@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1485537863-2707-5-git-send-email-Yazen.Ghannam@amd.comSigned-off-by: NBorislav Petkov <bp@suse.de>
-
由 Yazen Ghannam 提交于
We have a few functions that register/unregister an ECC error decoding routine. These functions are called when we init/remove instances. However, they are global and so don't need to be registered/unregistered multiple times. So move them out of the init/remove instance functions and into the module init/exit routines. Signed-off-by: NYazen Ghannam <Yazen.Ghannam@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1485297149-13733-4-git-send-email-Yazen.Ghannam@amd.comSigned-off-by: NBorislav Petkov <bp@suse.de>
-
由 Yazen Ghannam 提交于
Jump to memory freeing routines when init_one_instance() fails. Signed-off-by: NYazen Ghannam <Yazen.Ghannam@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1485297149-13733-3-git-send-email-Yazen.Ghannam@amd.comSigned-off-by: NBorislav Petkov <bp@suse.de>
-
由 Yazen Ghannam 提交于
Users may not be familiar with the concept of deferred errors. There is no action for users to take on this type of error, so give more context in the error message to make this more clear. Signed-off-by: NYazen Ghannam <Yazen.Ghannam@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1485297149-13733-2-git-send-email-Yazen.Ghannam@amd.comSigned-off-by: NBorislav Petkov <bp@suse.de>
-
- 26 1月, 2017 1 次提交
-
-
由 Borislav Petkov 提交于
REDMEMB[17] is the ECC_Locator bit, which, when set, identifies the CS[3:2] as the simbols in error. And thus the second channel. The macro computing it was wrong so get rid of it (it was used at one place only) and get rid of the conditional too. Generates better code this way anyway. Signed-off-by: NBorislav Petkov <bp@suse.de> Reported-by: NDavid Binderman <dcb314@hotmail.com> Reviewed-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 23 1月, 2017 1 次提交
-
-
由 Nicolas Iooss 提交于
Function sbridge_register_mci() sets pvt->info.show_interleave_mode to knl_show_interleave_mode() on Knight's Landing and show_interleave_mode() anywhere else. Merge show_interleave_mode() and knl_show_interleave_mode() in a single implementation and use it without an indirect function pointer. Signed-off-by: NNicolas Iooss <nicolas.iooss_linux@m4x.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170122172806.10412-1-nicolas.iooss_linux@m4x.org [ Call it get_intlv_mode_str(). ] Signed-off-by: NBorislav Petkov <bp@suse.de>
-
- 19 1月, 2017 1 次提交
-
-
由 Aaron Miller 提交于
The old csrowX sysfs directories have per-csrow error counters, but the new dimmX directories do not currently expose error counts. EDAC already keeps these counts, add them to sysfs so per-DIMM counts are still available when CONFIG_EDAC_LEGACY_SYSFS=n. Signed-off-by: NAaron Miller <aaronmiller@fb.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20161103220153.3997328-1-aaronmiller@fb.comSigned-off-by: NBorislav Petkov <bp@suse.de>
-
- 16 1月, 2017 2 次提交
-
-
由 Yazen Ghannam 提交于
We should save the return code from probe_one_instance() so that it can be returned from the module init function. Otherwise, we'll be returning the -ENOMEM from above. Signed-off-by: NYazen Ghannam <Yazen.Ghannam@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1484322741-41884-1-git-send-email-Yazen.Ghannam@amd.comSigned-off-by: NBorislav Petkov <bp@suse.de>
-
由 Arvind Yadav 提交于
If ioremap_nocache() fails, it will return NULL. Which will then cause a NULL-pointer dereference. Handle the returned value properly. Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1484549092-11349-1-git-send-email-arvind.yadav.cs@gmail.com [ Boris: massage commit message and improve error message. ] Signed-off-by: NBorislav Petkov <bp@suse.de>
-
- 06 1月, 2017 2 次提交
-
-
由 Alexander Alemayhu 提交于
s/labed/labeled/ s/differenciate/differentiate/ Signed-off-by: NAlexander Alemayhu <alexander@alemayhu.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170105211150.24003-1-alexander@alemayhu.comSigned-off-by: NBorislav Petkov <bp@suse.de>
-
由 Ben Dooks 提交于
The dev_attr_sdram_scrub_rate is not declared in a header or used anywhere else, so make it static to fix the following warning: drivers/edac/edac_mc_sysfs.c:816:1: warning: symbol 'dev_attr_sdram_scrub_rate' was not declared. Should it be static? Signed-off-by: NBen Dooks <ben.dooks@codethink.co.uk> Reviewed-by: NMauro Carvalho Chehab <mchehab@s-opensource.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1465407356-7357-1-git-send-email-ben.dooks@codethink.co.ukSigned-off-by: NBorislav Petkov <bp@suse.de>
-
- 02 1月, 2017 2 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm由 Linus Torvalds 提交于
Pull DAX updates from Dan Williams: "The completion of Jan's DAX work for 4.10. As I mentioned in the libnvdimm-for-4.10 pull request, these are some final fixes for the DAX dirty-cacheline-tracking invalidation work that was merged through the -mm, ext4, and xfs trees in -rc1. These patches were prepared prior to the merge window, but we waited for 4.10-rc1 to have a stable merge base after all the prerequisites were merged. Quoting Jan on the overall changes in these patches: "So I'd like all these 6 patches to go for rc2. The first three patches fix invalidation of exceptional DAX entries (a bug which is there for a long time) - without these patches data loss can occur on power failure even though user called fsync(2). The other three patches change locking of DAX faults so that ->iomap_begin() is called in a more relaxed locking context and we are safe to start a transaction there for ext4" These have received a build success notification from the kbuild robot, and pass the latest libnvdimm unit tests. There have not been any -next releases since -rc1, so they have not appeared there" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: ext4: Simplify DAX fault path dax: Call ->iomap_begin without entry lock during dax fault dax: Finish fault completely when loading holes dax: Avoid page invalidation races and unnecessary radix tree traversals mm: Invalidate DAX radix tree entries only if appropriate ext2: Return BH_New buffers for zeroed blocks
-
- 31 12月, 2016 2 次提交
-
-
git://git.lwn.net/linux由 Linus Torvalds 提交于
Pull documentation fixes from Jonathan Corbet: "Two small fixes: - A merge error on my part broke the DocBook build. I've requisitioned one of tglx's frozen sharks for appropriate disciplinary action and resolved to be more careful about testing the DocBook stuff as long as it's still around. - Fix an error in unaligned-memory-access.txt" * tag 'docs-4.10-rc1-fix' of git://git.lwn.net/linux: Documentation/unaligned-memory-access.txt: fix incorrect comparison operator docs: Fix build failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fix from Herbert Xu: "This fixes a boot failure on some platforms when crypto self test is enabled along with the new acomp interface" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: testmgr - Use heap buffer for acomp test input
-
- 30 12月, 2016 2 次提交
-
-
由 Olof Johansson 提交于
mm/filemap.c: In function 'clear_bit_unlock_is_negative_byte': mm/filemap.c:933:9: error: too few arguments to function 'test_bit' return test_bit(PG_waiters); ^~~~~~~~ Fixes: b91e1302 ('mm: optimize PageWaiters bit use for unlock_page()') Signed-off-by: NOlof Johansson <olof@lixom.net> Brown-paper-bag-by: NLinus Torvalds <dummy@duh.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
In commit 62906027 ("mm: add PageWaiters indicating tasks are waiting for a page bit") Nick Piggin made our page locking no longer unconditionally touch the hashed page waitqueue, which not only helps performance in general, but is particularly helpful on NUMA machines where the hashed wait queues can bounce around a lot. However, the "clear lock bit atomically and then test the waiters bit" sequence turns out to be much more expensive than it needs to be, because you get a nasty stall when trying to access the same word that just got updated atomically. On architectures where locking is done with LL/SC, this would be trivial to fix with a new primitive that clears one bit and tests another atomically, but that ends up not working on x86, where the only atomic operations that return the result end up being cmpxchg and xadd. The atomic bit operations return the old value of the same bit we changed, not the value of an unrelated bit. On x86, we could put the lock bit in the high bit of the byte, and use "xadd" with that bit (where the overflow ends up not touching other bits), and look at the other bits of the result. However, an even simpler model is to just use a regular atomic "and" to clear the lock bit, and then the sign bit in eflags will indicate the resulting state of the unrelated bit #7. So by moving the PageWaiters bit up to bit #7, we can atomically clear the lock bit and test the waiters bit on x86 too. And architectures with LL/SC (which is all the usual RISC suspects), the particular bit doesn't matter, so they are fine with this approach too. This avoids the extra access to the same atomic word, and thus avoids the costly stall at page unlock time. The only downside is that the interface ends up being a bit odd and specialized: clear a bit in a byte, and test the sign bit. Nick doesn't love the resulting name of the new primitive, but I'd rather make the name be descriptive and very clear about the limitation imposed by trying to work across all relevant architectures than make it be some generic thing that doesn't make the odd semantics explicit. So this introduces the new architecture primitive clear_bit_unlock_is_negative_byte(); and adds the trivial implementation for x86. We have a generic non-optimized fallback (that just does a "clear_bit()"+"test_bit(7)" combination) which can be overridden by any architecture that can do better. According to Nick, Power has the same hickup x86 has, for example, but some other architectures may not even care. All these optimizations mean that my page locking stress-test (which is just executing a lot of small short-lived shell scripts: "make test" in the git source tree) no longer makes our page locking look horribly bad. Before all these optimizations, just the unlock_page() costs were just over 3% of all CPU overhead on "make test". After this, it's down to 0.66%, so just a quarter of the cost it used to be. (The difference on NUMA is bigger, but there this micro-optimization is likely less noticeable, since the big issue on NUMA was not the accesses to 'struct page', but the waitqueue accesses that were already removed by Nick's earlier commit). Acked-by: NNick Piggin <npiggin@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 12月, 2016 10 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fix from Herbert Xu: "This fixes a hash corruption bug in the marvell driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: marvell - Copy IVDIG before launching partial DMA ahash requests
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Various ipvlan fixes from Eric Dumazet and Mahesh Bandewar. The most important is to not assume the packet is RX just because the destination address matches that of the device. Such an assumption causes problems when an interface is put into loopback mode. 2) If we retry when creating a new tc entry (because we dropped the RTNL mutex in order to load a module, for example) we end up with -EAGAIN and then loop trying to replay the request. But we didn't reset some state when looping back to the top like this, and if another thread meanwhile inserted the same tc entry we were trying to, we re-link it creating an enless loop in the tc chain. Fix from Daniel Borkmann. 3) There are two different WRITE bits in the MDIO address register for the stmmac chip, depending upon the chip variant. Due to a bug we could set them both, fix from Hock Leong Kweh. 4) Fix mlx4 bug in XDP_TX handling, from Tariq Toukan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: stmmac: fix incorrect bit set in gmac4 mdio addr register r8169: add support for RTL8168 series add-on card. net: xdp: remove unused bfp_warn_invalid_xdp_buffer() openvswitch: upcall: Fix vlan handling. ipv4: Namespaceify tcp_tw_reuse knob net: korina: Fix NAPI versus resources freeing net, sched: fix soft lockup in tc_classify net/mlx4_en: Fix user prio field in XDP forward tipc: don't send FIN message from connectionless socket ipvlan: fix multicast processing ipvlan: fix various issues in ipvlan_process_multicast()
-
由 Cihangir Akturk 提交于
In the actual implementation ether_addr_equal function tests for equality to 0 when returning. It seems in commit 0d74c4 it is somehow overlooked to change this operator to reflect the actual function. Signed-off-by: NCihangir Akturk <cakturk@gmail.com> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
由 John Brooks 提交于
The 80211.tmpl DocBook file was removed in commit 819bf593 ("docs-rst: sphinxify 802.11 documentation"), but the 80211.xml target was re-added to the Makefile by commit 7ddedebb ("ALSA: doc: ReSTize writing-an-alsa-driver document"), leading to a failure when building the documentation: *** No rule to make target 'Documentation/DocBook/80211.xml', needed by 'Documentation/DocBook/80211.aux.xml'. cc: stable@vger.kernel.org Signed-off-by: NJohn Brooks <john@fastquake.com> Mea-culpa-by: NJonathan Corbet <corbet@lwn.net> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
由 Jonathan Corbet 提交于
Linux 4.10-rc1
-
由 Kweh, Hock Leong 提交于
Fixing the gmac4 mdio write access to use MII_GMAC4_WRITE only instead of OR together with MII_WRITE. Signed-off-by: NKweh, Hock Leong <hock.leong.kweh@intel.com> Acked-By: NJoao Pinto <jpinto@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chun-Hao Lin 提交于
This chip is the same as RTL8168, but its device id is 0x8161. Signed-off-by: NChun-Hao Lin <hau@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jason Wang 提交于
After commit 73b62bd0 ("virtio-net: remove the warning before XDP linearizing"), there's no users for bpf_warn_invalid_xdp_buffer(), so remove it. This is a revert for commit f23bc46c. Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: NJason Wang <jasowang@redhat.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 pravin shelar 提交于
Networking stack accelerate vlan tag handling by keeping topmost vlan header in skb. This works as long as packet remains in OVS datapath. But during OVS upcall vlan header is pushed on to the packet. When such packet is sent back to OVS datapath, core networking stack might not handle it correctly. Following patch avoids this issue by accelerating the vlan tag during flow key extract. This simplifies datapath by bringing uniform packet processing for packets from all code paths. Fixes: 5108bbad ("openvswitch: add processing of L3 packets"). CC: Jarno Rajahalme <jarno@ovn.org> CC: Jiri Benc <jbenc@redhat.com> Signed-off-by: NPravin B Shelar <pshelar@ovn.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Haishuang Yan 提交于
Different namespaces might have different requirements to reuse TIME-WAIT sockets for new connections. This might be required in cases where different namespace applications are in place which require TIME_WAIT socket connections to be reduced independently of the host. Signed-off-by: NHaishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 12月, 2016 7 次提交
-
-
由 Laura Abbott 提交于
Christopher Covington reported a crash on aarch64 on recent Fedora kernels: kernel BUG at ./include/linux/scatterlist.h:140! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 752 Comm: cryptomgr_test Not tainted 4.9.0-11815-ge93b1cc8 #162 Hardware name: linux,dummy-virt (DT) task: ffff80007c650080 task.stack: ffff800008910000 PC is at sg_init_one+0xa0/0xb8 LR is at sg_init_one+0x24/0xb8 ... [<ffff000008398db8>] sg_init_one+0xa0/0xb8 [<ffff000008350a44>] test_acomp+0x10c/0x438 [<ffff000008350e20>] alg_test_comp+0xb0/0x118 [<ffff00000834f28c>] alg_test+0x17c/0x2f0 [<ffff00000834c6a4>] cryptomgr_test+0x44/0x50 [<ffff0000080dac70>] kthread+0xf8/0x128 [<ffff000008082ec0>] ret_from_fork+0x10/0x50 The test vectors used for input are part of the kernel image. These inputs are passed as a buffer to sg_init_one which eventually blows up with BUG_ON(!virt_addr_valid(buf)). On arm64, virt_addr_valid returns false for the kernel image since virt_to_page will not return the correct page. Fix this by copying the input vectors to heap buffer before setting up the scatterlist. Reported-by: NChristopher Covington <cov@codeaurora.org> Fixes: d7db7a88 ("crypto: acomp - update testmgr with support for acomp") Signed-off-by: NLaura Abbott <labbott@redhat.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jan Kara 提交于
Now that dax_iomap_fault() calls ->iomap_begin() without entry lock, we can use transaction starting in ext4_iomap_begin() and thus simplify ext4_dax_fault(). It also provides us proper retries in case of ENOSPC. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Jan Kara 提交于
Currently ->iomap_begin() handler is called with entry lock held. If the filesystem held any locks between ->iomap_begin() and ->iomap_end() (such as ext4 which will want to hold transaction open), this would cause lock inversion with the iomap_apply() from standard IO path which first calls ->iomap_begin() and only then calls ->actor() callback which grabs entry locks for DAX (if it faults when copying from/to user provided buffers). Fix the problem by nesting grabbing of entry lock inside ->iomap_begin() - ->iomap_end() pair. Reviewed-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Jan Kara 提交于
The only case when we do not finish the page fault completely is when we are loading hole pages into a radix tree. Avoid this special case and finish the fault in that case as well inside the DAX fault handler. It will allow us for easier iomap handling. Reviewed-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Jan Kara 提交于
Currently dax_iomap_rw() takes care of invalidating page tables and evicting hole pages from the radix tree when write(2) to the file happens. This invalidation is only necessary when there is some block allocation resulting from write(2). Furthermore in current place the invalidation is racy wrt page fault instantiating a hole page just after we have invalidated it. So perform the page invalidation inside dax_iomap_actor() where we can do it only when really necessary and after blocks have been allocated so nobody will be instantiating new hole pages anymore. Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Jan Kara 提交于
Currently invalidate_inode_pages2_range() and invalidate_mapping_pages() just delete all exceptional radix tree entries they find. For DAX this is not desirable as we track cache dirtiness in these entries and when they are evicted, we may not flush caches although it is necessary. This can for example manifest when we write to the same block both via mmap and via write(2) (to different offsets) and fsync(2) then does not properly flush CPU caches when modification via write(2) was the last one. Create appropriate DAX functions to handle invalidation of DAX entries for invalidate_inode_pages2_range() and invalidate_mapping_pages() and wire them up into the corresponding mm functions. Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Reviewed-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Jan Kara 提交于
So far we did not return BH_New buffers from ext2_get_blocks() when we allocated and zeroed-out a block for DAX inode to avoid racy zeroing in DAX code. This zeroing is gone these days so we can remove the workaround. Reviewed-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-